检索结果-南通市图书馆

Rare Metals 2015年第11期34卷 770-775页

作者： Xing-Kai Duan Kong-Gang Hu Da-Hu Ma Wang-Nian Zhang Yue-Zhen Jiang shu-chao guo Center for New Energy Materials Research School of Mechanical and Materials Engineering Jiujiang University

The Bi0.5Na0.02Sb1.48-xInxTe3alloys（x =0.02-0.20） were synthesized by vacuum melting and hot pressing methods at 753 K,60 MPa for 30 *** of Na and In dual partial substitutions for Sb on the thermoelectric properties were investigated from 300 to 500 *** Sb with Na and In can enhance the Seebeck coefficient effectively near room *** electrical resistivity of the Na and In dual-doping samples is higher within the whole test temperature *** Bi0.5Na0.02Sb1.48-xInxTe3samples（x = 0.02,0.06） play a great role in optimizing the thermal *** for the Bi0.5Na0.02Sb1.46In0.02Te3alloy,the minimum value of thermal conductivity reaches 0.53 W·m-1·K-1at 320 *** thermoelectric performance of the Na and In dualdoped samples is greatly improved,and a figure of merit ZT of 1.26 is achieved at 300 K for the Bi0.5Na0.02Sb1.42In0.06Te3,representing 26%enhancement with respect to ZT = 1.0 of the undoped sample.

关键词： Microstructure Dual doping Hot pressing Thermal co

Testing the first law of black hole mechanics with gravitational waves

在线全文

学校读者我要写书评

暂无评论

Science China(Physics,Mechanics & Astronomy) 2024年第10期Mechanics & Astronomy) .卷 80-86页

作者： chao-Wan-Zhen Wang Jin-Bao Zhu guo-Qing Huang Fu-Wen shu Department of Physics Nanchang University Center for Relativistic Astrophysics and High Energy Physics Nanchang University GCAP-CASPER Physics DepartmentBaylor University

The successful observation of gravitational waves has provided humanity with an additional method to explore the universe, particularly black holes. In this study, we utilize data from LIGO and Virgo gravitational wave observations to test the first law of black hole mechanics, employing two different approaches. We consider the secondary compact object as a perturbation to the primary black hole before the merger, and the remnant black hole as a stationary black hole after the merger. In the pre-merger and post-merger analysis, our results demonstrate consistency with the first law, with an error level of approximate 25% at a68% credibility level for GW190403 051519. In the full inspiral-merger-ringdown analysis, our results show consistency with the first law of black hole mechanics, with an error level of about 6% at a 68% credibility level and 10% at a 95% credibility level for GW191219 163120. Additionally, we observe that the higher the mass ratio of the gravitational wave source, the more consistent our results are with the first law of black hole mechanics. Overall, our study sheds light on the nature of compact binary coalescence and their implications for black hole mechanics.

关键词： gravitational waves black hole mechanics data analysis ringdown

同方期刊数据库

Mismatch analysis of all-fiber coherent beam combiners based on the self-imaging effect

在线全文

学校读者我要写书评

暂无评论

High Power Laser Science and Engineering 2024年第2期12卷 1-15页

作者： Yuefang Yan Yu Liu Haoyu Zhang Yuwei Li chao guo Qiang shu Wenhui Huang Feng Jing Rumao Tao Laser Fusion Research Center China Academy of Engineering PhysicsMianyangChina Key Laboratory of Particle&Radiation Imaging(Tsinghua University) Ministry of EducationBeijingChina

All-fiber coherent beam combiners based on the self-imaging effect can achieve a near-perfect single laser beam,which can provide a promising way to overcome the power limitation of a single-fiber *** of the key points is combining efficiency,which is determined by various mismatches during fabrication.A theoretical model has been built,and the mismatch error is analyzed numerically for the first *** mismatch errors have been numerically studied with the beam quality and combining efficiency being chosen as the evaluation *** tolerance of each mismatch error for causing 1%loss is calculated to guide the design of the beam *** simulation results are consistent with the experimental results,which show that the mismatch error of the square-core fiber is the main cause of the efficiency *** results can provide useful guidance for the fabrication of all-fiber coherent beam combiners.

关键词： all-fiber coherent beam combination mismatch analysis self-imaging

OSW-1 triggers necroptosis in colorectal cancer cells through the RIPK1/RIPK3/MLKL signaling pathway facilitated by the RIPK1- p62/SQSTM1 complex

在线全文

学校读者我要写书评

暂无评论

World Journal of Gastroenterology 2024年第15期30卷 2155-2174页

作者： Nan Wang chao-Yang Li Teng-Fei Yao Xiao-Dan Kang Hui-shu guo Clinical Laboratory Medicine The First Affiliated Hospital of Dalian Medical UniversityDalian 116023Liaoning ProvinceChina The Institute of Integrative Medicine Dalian Medical UniversityDalian 116044Liaoning ProvinceChina The Institute of Laboratory Medicine Dalian Medical UniversityDalian 116044Liaoning ProvinceChina Central Laboratory The First Affiliated Hospital of Dalian Medical UniversityDalian 116011Liaoning ProvinceChina

BACKGROUND Necroptosis has emerged as a novel molecular pathway that can be targeted by chemotherapy agents in the treatment of ***-1,which is derived from the bulbs of Ornithogalum saundersiae Baker,exerts a wide range of pharmaco-logical *** To explore whether OSW-1 can induce necroptosis in colorectal cancer(CRC)cells,thereby expanding its range of clinical *** We performed a sequence of functional experiments,including Cell Counting Kit-8 assays and flow cytometry analysis,to assess the inhibitory effect of OSW-1 on CRC *** utilized quantitative proteomics,employing tandem mass tag label-ing combined with liquid chromatography-tandem mass spectrometry,to analyze changes in protein *** bioinformatic analysis was conducted to elucidate the biological processes associated with the identified *** electron microscopy(TEM)and immunofluorescence studies were also performed to examine the effects of OSW-1 on ***,western blotting,siRNA experiments,and immunoprecipitation were employed to evaluate protein interactions within CRC *** The results revealed that OSW-1 exerted a strong inhibitory effect on CRC cells,and this effect was accompanied by a necroptosis-like morphology that was observable via ***-1 was shown to trigger necroptosis via activation of the RIPK1/RIPK3/MLKL ***,the accumulation of p62/SQSTM1 was shown to mediate OSW-1-induced necroptosis through its interaction with *** We propose that OSW-1 can induce necroptosis through the RIPK1/RIPK3/MLKL signaling pathway,and that this effect is mediated by the RIPK1-p62/SQSTM1 complex,in CRC *** results provide a theoretical foundation for the use of OSW-1 in the clinical treatment of CRC.

关键词： OSW-1 Necroptosis RIPK1 P62/SQSTM1 Colorectal cancer

Side Information-Based Stealthy False Data Injection Attacks Against Multi-Sensor Remote Estimation

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

IEEE/CAA Journal of Automatica Sinica 2024年第4期11卷 1054-1056页

作者： Haibin guo Zhong-Hua Pang chao Li the Key Laboratory of Fieldbus Technology and Automation of Beijing North China University of TechnologyBeijing 100144China

Dear Editor,This letter investigates a novel stealthy false data injection(FDI)attack scheme based on side information to deteriorate the multi-sensor estimation performance of cyber-physical systems(CPSs).Compared with most existing works depending on the full system knowledge,this attack scheme is only related to attackers'sensor and physical process *** design principle of the attack signal is derived to diverge the system estimation ***,it is proven that the proposed attack scheme can successfully bypass the residual-based ***,all theoretical results are verified by numerical simulation.

关键词： estimation scheme system

Microstructure and property of laser additive manufactured alloy Ti-6Al-2V-1.5Mo-0.5Zr-0.3Si after aged at different temperatures

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第5期43卷 2275-2281页

作者： guo-chao Li Xu Cheng Hua-Ming Wang National Engineering Laboratory of Additive Manufacturing for Large Metallic Components and Engineering Research Center of Ministry of Education on Laser Direct Manufacturing for Large Metallic Components School of Materials Science and EngineeringBeihang UniversityBeijing 100191China

The solid solution and aging treatment for conventional manufacturing processes might not be suitable for laser additive manufactured titanium alloys due to the different lamellar *** this study,the influence of aging temperatures(600,700 and 800°C)on microstructure and mechanical properties of titanium alloy Ti-6Al-2V-1.5Mo-0.5Zr-0.3Si was *** results indicate that after solid solution treatment at 970°C followed by water quenching,the alloy mainly consists of coarsening lamellar a phase in martensite α' *** at 600°C will not change the size of primary lamellar α phase but lead to huge amount of secondary a phases(α_(s))generating with very fine *** increasing the aging temperature,the number of α_(s) decreases but with coarsened *** aged at 800°C,the width of the asphase reaches 350 nm,almost 7 times wider than that aged at 600°*** changing size of α_(s) obviously influences the property of the *** fine α_(s) leads to high strength and microhardness but low plasticity,and specimen aged at 700°C with suitable assize has the best comprehensive properties.

关键词： α+βtitanium alloy Laser additive manufacturing Solid solution and aging treatment Microstructure Room temperature tensile property

Transferable adversarial slow feature extraction network for few-shot quality prediction in coal-to-ethylene glycol process

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Chemical Engineering 2024年第7期71卷 258-271页

作者： Cheng Yang chao Jiang guo Yu Jun Li Cuimei Bo School of Electrical Engineering and Control Science Nanjing Tech UniversityNanjing 211816China Department of Intelligent Manufacturing Nanjing Tech UniversityNanjing 210009China

In the coal-to-ethylene glycol(CTEG)process,precisely estimating quality variables is crucial for process monitoring,optimization,and control.A significant challenge in this regard is relying on offline laboratory analysis to obtain these variables,which often incurs substantial monetary costs and significant time *** resulting few-shot learning scenarios present a hurdle to the efficient development of predictive *** address this issue,our study introduces the transferable adversarial slow feature extraction network(TASF-Net),an innovative approach designed specifically for few-shot quality prediction in the CTEG ***-Net uniquely integrates the slowness principle with a deep Bayesian framework,effectively capturing the nonlinear and inertial characteristics of the CTEG ***,the model employs a variable attention mechanism to identify quality-related input variables adaptively at each time step.A key strength of TASF-Net lies in its ability to navigate the complex measurement noise,outliers,and system interference typical in CTEG *** learning strategy using a min-max game is adopted to improve its robustness and ability to model irregular industrial data accurately and ***,an incremental refining transfer learning framework is designed to further improve few-shot prediction performance achieved by transferring knowledge from the pretrained model on the source domain to the target *** effectiveness and superiority of TASF-Net have been empirically validated using a real-world CTEG *** with some state-of-the-art methods,TASF-Net demonstrates exceptional capability in addressing the intricate challenges for few-shot quality prediction in the CTEG process.

关键词： Chemical process Neural networks Slowness principle Transfer learning Prediction

Progress in preparation of AlN-reinforced magnesium matrix composites:A review

在线全文

学校读者我要写书评

暂无评论

China Foundry 2024年第1期21卷 1-10页

作者： Lu Chen shu-lin Lü Di-jia Zhao Wei guo Jian-yu Li shu-sen Wu State Key Lab of Materials Processing and Die&Mould Technology School of Materials Science and EngineeringHuazhong University of Science and TechnologyWuhan 430074China

As a ceramic material,AlN has very good thermophysical and mechanical *** addition,AlN is an effective refining agent for Mg alloys because it has a lattice constant similar to that of ***,AlN is an ideal reinforcement for magnesium matrix composites(MMCs),and is attracting increasing *** review addresses the development of preparation technologies for AlN-reinforced Mg matrix *** mainstream preparation techniques include stir casting,melt infiltration,powder metallurgy,and in-situ *** addition,the advantages and disadvantages of these techniques are analyzed in depth,and it is pointed out that the next direction for the preparation of high-performance AlN-reinforced MMCs is less aluminization and multiple technologies integration.

关键词： AlN MMCs preparation thermophysical property mechanical property

Impacts of inter-satellite links on the ECOM model performance for BDS-3 MEO satellites

在线全文

学校读者我要写书评

暂无评论

Satellite Navigation 2024年第1期5卷 140-154页

作者： chao Yang Jing guo Xiaolong Xu Longyu Wang Qile Zhao GNSS Research Center Wuhan UniversityNo.129 Luoyu RoadWuhan430079China

Inter-satellite link(ISL)plays an essential role in current and future Global Navigation Satellite System(GNSS).In this study,we investigate the impact of ISL observations on precise orbit determination for BeiDou-3 Navigation Satellite System(BDS-3)Medium Earth Orbit(MEO)satellites based on different Extended CODE Orbit Models(ECOM).Thanks to the better observation geometry of the Ka-band ISL data compared to the L-band data for BDS-3 MEO satellites,the ISL solution substantially reduces Orbit Boundary Discontinuity(OBD)errors,except for C30,which suffers from unstable Ka-band hardware *** the external quality analysis,ISL significantly enhances the reliability of the orbit of MEO satellites manufactured by the China Academy of Space Technology(CAST).The standard deviation(STD)of the satellite laser ranging(SLR)residuals is approximately 2.5 cm,and the root mean square(RMS)is reduced by 10–23%compared to L-band ***,the Sun-elongation angle dependent systematic error in SLR residuals nearly vanishes based on the reduced 5-parameter ECOM(ECOM1)or extended 7-parameter ECOM(ECOM2)with ISL *** is because the ISL reduces the correlation between state parameters and solar radiation pressure(SRP)parameters as well as those among SRP parameters,leading to a more accurate estimation of both orbit and SRP perturbations,particularly those along B *** confirms that the deficiency of the SRP models for BDS-3 CAST satellites can be compensated by using better observation geometry from ISL *** the other hand,for the satellite manufactured by Shanghai Engineering Center for Microsatellites(SECM),the ISL allows for a more accurate estimation of the Bc_(1)parameter in the ECOM1 *** only reduces linear systematic error,possibly because the impact generated by the satellite bus cannot be entirely absorbed by the B-direction parameters.

关键词： BDS-3 MEO Inter-satellite link Solar radiation pressure ECOM

Synthesis of granulated Li_(1.33)Mn_(1.67)O_(4) via two antisolvent methods for lithium adsorption from gas-produced water

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Chemical Engineering 2024年第5期69卷 34-46页

作者： Jun Qiu Lu-Ri Bao Wei guo Ying Yang shu-Ying Sun National Engineering Research Center for Integrated Utilization of Salt Lake Resource East China University of Science and TechnologyShanghai 200237China

Gas-produced water is an accompanying wastewater in the natural gas extraction process,and it is a potential liquid lithium resource that contains a considerable amount of *** study investigated the feasibility of using manganese-based ion sieves to adsorb and extract lithium from gas-produced *** we focused on the applicability of two different granulation methods,extrusion and droplet,in gas-produced water *** types of H_(1.33)Mn_(1.67)O_(4) particles were prepared by the extrusion method(EHMO)and the droplet method(DHMO).The porosity of DHMO was much higher than that of EHMO,and the adsorption performance of DHMO increased with the decrease of binder *** prepared with a binder concentration of 0.14 g·ml^(-1)exhibited the best adsorption performance in gas-produced water,and the Li^(+)adsorption capacity could reach 25.14 mg·g^(-1).In gas-produced water,the adsorption equilibrium of DHMO only took 9 h,and the adsorption process conformed to the Langmuir model and pseudo-second-order kinetic *** pore diffusion model(PDM)could well describe its adsorption ***,DHMO showed a great selectivity to Li^(+),and the selectivity order of DHMO in gas-produced water was Li^(+)>Ba^(2+)>>Mg^(2+),Ca^(2+),Sr^(2+)>>Na^(+)>>K^(+).After 20 cycles,the Li^(+)adsorption capacity was still higher than 17.30 mg·g^(-1),and the rate of manganese dissolution was less than 1%.

关键词： Gas-produced water Granulation Li_(1.33)Mn_(1.67)O_(4)