检索结果-南通市图书馆

Hot deformation behavior of Super304H austenitic heat resistant steel

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2010年第2期17卷 167-172页

作者： Shu-ping Tan Zhen-hua Wang shi-chang cheng Zheng-dong Liu Jie-cai Han School of Astronautics Harbin Institute of Technology Harbin 150001 China State Key Laboratory of Metastable Materials Science and Technology Yanshan University Qinhuangdao 066004 China Central Iron and Steel Research Institute Beijing 100081 China

The hot compression tests of Super304H austenitic heat resistant steel were carried out at 800-1200℃and 0.005-5 s^-1 using a Gleeble 3500 thermal-mechanical simulator,and its deformation behavior was *** results show that the flow stress of Super304H steel decreases with the decrease of strain rate and the increase of deformation temperature; the hot deformation activation energy of the steel is 485 kJ/*** hot deformation equation and the relationship between the peak stress and the deformation temperature and strain rate is *** softening caused by deformation heating cannot be neglected when both the deformation temperature and strain rate are higher.

关键词： austenitic steel heat resistant hot deformation flow stress dynamic recrystallization

Microstructure Evolution and Mechanical Properties of HR3C Steel during Long-term Aging at High Temperature

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2014年第8期21卷 765-773页

作者： Bin WANG Zheng-dong LIU shi-chang cheng Chun-ming LIU Jing-zhong WANG Institute of Structural Materials China Iron and Steel Research Institute Group School of Materials and Metallurgy Northeastern University

Microstructure evolution and the changes in mechanical properties of HR3 Csteel during long-term aging at650,700 and 750℃ were *** precipitated phases of the aging steel included M23C6 carbides,Z-phase and a trace amount of Nb（C,N）.The M23C6 carbides were distributed mainly at the grain boundary,while Z-phase was mainly inside the *** of both M23C6 carbides and Z-phase during the aging process increased with increasing aging period and *** of M23C6 carbides was influenced significantly by aging time and temperature,while the size of the Z-phase was relatively less affected by the aging time and temperature,which had a steady strengthening *** of the M23C6 carbides was the main reason for the decline in high temperature yield strength during long-term aging at 750℃.The M23C6 carbides were linked into a continuous chain along the grain boundary which accounted for the decrease of toughness during aging.

关键词： HR3C steels microstructure evolutions mechanical propertys aging

Effect of droplet characteristics on liquid-phase distribution in spray zone of internal mixing air-mist nozzle

在线全文

学校读者我要写书评

暂无评论

China Foundry 2024年第2期21卷 185-196页

作者： Wei-li Wu chang-gui cheng Yang Li shi-fa Wei De-li Chen The State Key Laboratory of Refractories and Metallurgy Wuhan University of Science and TechnologyWuhan 430081China Hubei Provincial Key Laboratory for New Processes of Ironmaking and Steelmaking Wuhan University of Science and TechnologyWuhan 430081China Technology Center Fushun Special Steel Co.Ltd.Fushun 113001LiaoningChina

In continuous casting production,droplet characteristics are important parameters for evaluating the nozzle atomization quality,and have a significant impact on the secondary cooling effect and the slab *** order to study the behavior of atomized droplets after reaching the slab surface and to optimize the spray cooling effect,the influence of droplet diameter and droplet velocity on the migration behavior of droplets in the secondary cooling zone was analyzed by FLUENT *** show that the droplets in the spray zone and on the slab surface are mainly concentrated in the center,thus,the liquid volume fraction in the center is higher than that of either *** the droplet diameter increases,the region of high liquid volume fraction on the slab surface becomes wider,and the liquid phase distribution in the slab width direction becomes *** increasing the droplet velocity at the nozzle exit has little effect on droplet diffusion in the spray zone,the distribution becomes more uneven due to more liquid reaches the slab surface per unit time.A prediction formula of the maximum water flow rate on the slab surface for specific droplet characteristics was proposed based on dimensionless analysis and validated by simulated data.A nozzle spacing of 210 mm was recommended under the working conditions in this study,which ensures effective coverage of the spray water over the slab surface and enhances the distribution uniformity of water flow rate in the transverse direction.

关键词： continuous casting secondary cooling zone internal mixing air-mist nozzle droplet characteristics liquid phase distribution water flow rate

Single-wall carbon nanotube fiber non-woven fabrics with a high electrothermal heating response

在线全文

学校读者我要写书评

暂无评论

Nano Research 2024年第6期17卷 5621-5628页

作者： Xinyu Jiao Lele Xu Xinyang Sun Chao shi Peng-Xiang Hou chang Liu Hui-Ming cheng Shenyang National Laboratory for Materials Science Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China School of Materials Science and Engineering University of Science and Technology of ChinaHefei 230026China Faculty of Materials Science and Engineering/Institute of Technology for Carbon Neutrality Shenzhen Institute of Advanced TechnologyChinese Academy of SciencesShenzhen 518055China

Carbon nanotube(CNT)fibers have great promise for constructing multifunctional fabrics with high electrical conductivity,good electro-heating ability,excellent flexibility,and a low ***,the inter-fiber contacts in the fabric greatly reduce these advantages and limit their ***,a simple pressure-fusing method to fabricate single-wall CNT(SWCNT)fiber non-woven fabrics(NWFs)that are composed of interconnected SWCNT fibers with fused joints is reported,which have good flexibility,a low density of 0.46 g/cm^(3),a high electrical conductivity of 3.7×10^(5)S/m,and a record high specific electrical conductivity of 803(S·m^(2))/*** also showed excellent electrical heating ability,so that a temperature of~160℃was rapidly reached at a low voltage of 2 *** with their low density,the SWCNT fiber NWFs are promising for use as a heating unit for low temperature battery protection and de-icing applications.

关键词： carbon nanotube fiber nonwoven fabrics fusing electrothermal heating

Streamflow abrupt change and the driving factors in glacierized basins of Tarim Basin,Northwest China

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Advances in Climate change Research 2024年第1期15卷 75-89页

作者： cheng-De YANG Min XU shi-chang KANG Cong-Sheng FU Wei ZHANG Di-Di HU State Key Laboratory of Cryospheric Science Northwest Institute of Eco-Environment and ResourcesChinese Academy of SciencesLanzhou 730000China University of Chinese Academy of Sciences Beijing 100049China Key Laboratory of Watershed Geographic Sciences Nanjing Institute of Geography and LimnologyChinese Academy of SciencesNanjing 210000China

A climate transition towards warm-wet conditions in Northwest China has drawn much *** continuous climate change and universal glacier degradation,increasing water-related hazards and vulnerability have become one of the important problems facing the Tarim ***,the impacts of the climate transition on streamflow abrupt change and extreme hydrological events were less discussed,especially in glacial *** the present study,the discharge datasets in four glacial basins of Tarim Basin from 1979 to 2018 were constructed using the GRU-GSWAT+model *** differences in streamflow characteristics,the shift of hydrological extreme pattern,and potential changes of the controlling factors before and after the abrupt changes were *** results indicated that the abrupt change point(ACP)in streamflow occurred in 2000 in the Qarqan River Basin,2002 in the Weigan River Basin,and 1994 in the Aksu River Basin and the Yarkant River Basin.A general decrease in streamflow before the ACP has shifted to a notable upward trend in the Qarqan River Basin and the Aksu River Basin,while minor upward fluctuations were observed in other ***,the hydrological characteristics in extreme events vary dramatically before and after the ACPs,characterized by a pronouncing shift from drought-dominant pattern to wet events dominated *** driven climate factors have been altered after the ACPs with notable spatial heterogeneity,in which temperature remained as the dominant role in meltwater-dominated basins while the influence of precipitation has increased after the ACPs,whereas the sensitivity of temperature on streamflow change has been enhanced in basins dominated by precipitation such as the Qarqan River *** to the evident warming-wetting trend and glacier compensation effect,both the inter-annual and intra-annual streamflow fluctuations can be efficiently smoothed in basins with a high glacier area ratio(GAR).These findings provide a

关键词： Abrupt change Streamflow Hybrid model Tarim Basin Glacier

Contrasting strategies of optimizing carrier concentration in bulk InSe for enhanced thermoelectric performance

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Rare Metals 2024年第9期43卷 4425-4432页

作者： Hao-Nan shi Shu-Lin Bai Yu-Ping Wang Li-Zhong Su Qian Cao cheng chang Li-Dong Zhao School of Materials Science and Engineering Beihang UniversityBeijing 100191China School of Materials Science and Engineering Taiyuan University of Science and TechnologyTaiyuan 030024China Huabei Cooling Device Co.Ltd. Hebei 065400China

Indium selenide(InSe),as a wide-bandgap semiconductor,has received extensive attention in the flexible electronics field in recent years due to its exceptional plasticity and promising thermoelectric ***,the low carrier concentration severely limits its thermoelectric performance *** this work,we conducted contrasting strategies that can be employed to increase the carrier concentration of InSe,including bandgap narrowing and heterovalent ***,the carrier concentration initially increases as a result of the reduced bandgap upon Te alloying and then slightly decreases due to the weak electronegativity of *** Br doping realizes high carrier concentration by pushing the Fermi level into the conduction bands and activating the multiple *** the other hand,both Te and Br obviously suppress the thermal conductivity due to the point defect *** contrast,Br doping realizes a higher thermoelectric performance with a maximum ZT of~0.13 at 773 K benefiting from the better optimization of carrier *** work elucidates the strategies for enhancing carrier concentration at anion sites and demonstrates the high efficiency of halogen doping in ***,the carrier concentration of InSe is promising to be further optimized,and future work should focus on employing approaches such as cation doping or secondphase compositing.

关键词： Thermoelectric InSe Carrier concentration Bandgap Heterovalent doping

Assessment of climate damage in China based on integrated assessment framework

在线全文

学校读者我要写书评

暂无评论

Advances in Climate change Research 2024年第1期15卷 124-133页

作者： Jie LIU Xiang-Zhen shi Li YANG chang-Yi LIU Jin-cheng WANG Rui-Min ZHU Xue-Li shi Qiu-Feng LIU International Business School Shanxi Normal UniversityXi'an 710062China University of Chinese Academy of Social Sciences Bejing 102488China School of Economics and Management Xinjiang UniversityUrumqi 830046China Global Energy Interconnection Development and Cooperation Organization(GEIDCO) Bejing 100031China Hubei Enshi College Enshi 445099China CMA Earth System Modeling and Prediction Centre China Meteorological AdministrationBeijing 100081China National Climate Centre China Meteorological AdministrationBeijing 100081China

Developing a localized and consistent model framework for climate loss and damage assessment is crucial for the policy-making of climate change mitigation and *** study introduces a comprehensive,multidisciplinary Integrated Assessment Model(IAM)framework for evaluating climate damage in China,utilizing BCC-SESM climate model and FUND sectoral climate damage model under the SSP2-RCPs *** a bottom-up approach,the research estimates climate damage across eight major sectors,recalibrates sectoral climate damage functions and parameters for China,and elucidates distinctions among direct climate loss,market climate loss,and aggregate climate *** findings reveal that the total climate damage function for China follows a quadratic pattern in response to temperature *** 2050,the estimated climate damage is projected to be 5.4%,5.7%,and 8.2%of GDP under RCP2.6,RCP4.5,and RCP8.5,***,both direct and market climate losses are projected to remain below 2%of GDP by 2050,while the aggregate climate loss could reach as high as 8.2%,which is predominantly attributed to non-market *** a sectoral perspective,under the RCP8.5 scenario,human health damage constitutes the largest share(61.9%)of the total climate loss by 2050,followed by sea-level rise damage(18.6%).This study sheds lights on the adaptation policy that should attach importance to the non-market sectors,particularly focusing on human health and sea-level rise.

关键词： Climate loss and damage Integrated assessment model(IAM) FUND model Representative concentration pathways(RCPs)scenario BCC-SESM

Effect of Al_(2)O_(3)/SiO_(2) mass ratio and CaO content on viscosity and structure of slag for pyrometallurgical processing of spent automotive catalysts

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第3期31卷 608-621页

作者： Zhe Wang Qi-long Wei cheng-bin shi Zhan-cheng Guo State Key Laboratory of Advanced Metallurgy University of Science and Technology BeijingBeijing 100083China

The effect of Al_(2)O_(3)/SiO_(2) mass ratio and CaO content on the viscosity and structure of the CaO-Al_(2)O_(3)-SiO_(2)-6MgO-1.5ZrO_(2)-1.5CeO_(2) slag was *** results show that with the increase in Al_(2)O_(3)/SiO_(2) mass ratio,the viscous flow units within the slag gradually change from Si-O-Si to Al-O-Al and ***,the substitution of Al_(2)O_(3) for SiO_(2) leads to the transformation of Si-O bonds towards weaker Al-O bonds,which weaken the bond strength of the aluminosilicate networks,thus leading to a decrease in the viscosity of *** increase in CaO content effectively promotes the depolymerization of the aluminosilicate networks,resulting in a significant decrease in the viscosity of the *** slag with Al_(2)O_(3)/SiO_(2) of 0.7-1.5 and CaO of 30 wt.%shows promise as the reference slag system for the Fe-collection smelting of spent automotive catalysts due to its good comprehensive performance.

关键词： Aluminosilicate slag Al_(2)O_(3)/SiO_(2)mass ratio CaO content Viscosity Slag structure

Quantifying structural distortion manipulation for desired perovskite phase:PartⅠ.Paradigm demonstration in tungsten oxides

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Materiomics 2024年第2期10卷 293-303页

作者： cheng Fang Hong Wang Siqi shi State Key Laboratory of Green Building Materials China Building Materials AcademyBeijing100024China Beijing Key Laboratory of Solar Energy and Building Energy-saving Glass Materials Processing Technology China Building Materials AcademyBeijing100024China Materials Genome Initiative Center Shanghai Jiao Tong UniversityShanghai200240China School of Materials Science and Engineering Shanghai Jiao Tong UniversityShanghai200240China School of Materials Science and Engineering Shanghai UniversityShanghai200444China Materials Genome Institute Shanghai UniversityShanghai200444China

Slight distortions can cause dramatic changes in the properties of crystalline perovskite materials and their *** to the numerous types of distortions and unclarified distortion-structure relations,a quantitative distortion manipulation for the desired crystalline phase of perovskite materials suitable for various application remains ***,by establishing parameter sets to systematically describe the types,magnitudes and positional relations involved in distortions,we are able to interpret the structural regulations and manipulation strategies in 7 reported crystal *** the con-struction of distortion-phase-property functional curves,we further propose a paradigm to quantify the structural distortion manipulation for desired perovskite *** the example of perovskite-like tungsten oxides,we successfully quantify their volume shrinkage and symmetry increase during *** work verifies that the complicated research and development of perovskite materials can be simplified into a mathematical problem solving process,which will inspire researchers with different backgrounds to participate,especially mathematicians and computer scientists.

关键词： Distortion manipulation Distortion-phase-property function Coordination polyhedron Tungsten oxide Perovskite