检索结果-南通市图书馆

A real-time intelligent lithology identification method based on a dynamic felling strategy weighted random forest algorithm

引用

Petroleum Science 2024年第2期21卷 1135-1148页

作者： Tie Yan rui Xu shi-Hui Sun zhao-Kai Hou Jin-Yu Feng School of Petroleum Engineering Northeast Petroleum UniversityDaqing163318HeilongjiangChina Sanya Offshore Oil&Gas Research Institute Northeast Petroleum UniversitySanya572025HainanChina

Real-time intelligent lithology identification while drilling is vital to realizing downhole closed-loop drilling. The complex and changeable geological environment in the drilling makes lithology identification face many challenges. This paper studies the problems of difficult feature information extraction,low precision of thin-layer identification and limited applicability of the model in intelligent lithologic identification. The author tries to improve the comprehensive performance of the lithology identification model from three aspects: data feature extraction, class balance, and model design. A new real-time intelligent lithology identification model of dynamic felling strategy weighted random forest algorithm(DFW-RF) is proposed. According to the feature selection results, gamma ray and 2 MHz phase resistivity are the logging while drilling(LWD) parameters that significantly influence lithology identification. The comprehensive performance of the DFW-RF lithology identification model has been verified in the application of 3 wells in different areas. By comparing the prediction results of five typical lithology identification algorithms, the DFW-RF model has a higher lithology identification accuracy rate and F1 score. This model improves the identification accuracy of thin-layer lithology and is effective and feasible in different geological environments. The DFW-RF model plays a truly efficient role in the realtime intelligent identification of lithologic information in closed-loop drilling and has greater applicability, which is worthy of being widely used in logging interpretation.

关键词： Intelligent drilling Closed-loop drilling Lithology identification Random forest algorithm Feature extraction

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Suppression of low-frequency ultrasound broadband vibration using star-shaped single-phase metamaterials

引用

Defence Technology（防务技术） 2024年第4期34卷 217-224页

作者： rui zhao Jian Zheng Jin Guo Yunbo shi Hengzhen Feng Jun Tang Jun Liu Science and Technology on Electronic Test&Measurement Laboratory North University of ChinaTaiyuan 030051ShanxiChina School of Mechatronical Engineering Beijing Institute of TechnologyBeijing 100081China

In order to suppress the low-frequency ultrasound vibration in the broadband range of 20 k Hz—100 k Hz,this paper proposes and discusses an acoustic metamaterial with low-frequency ultrasound vibration attenuation properties,which is configured by hybrid arc and sharp-angle convergent star-shaped *** effect of the dispersion relation and the bandgap characteristic for the scatterers in star-shaped are simulated and *** target bandgap width is extended by optimizing the geometry parameters of arc and sharp-angle convergent *** proposed metamaterial configured by optimized hybrid lattices exhibits remarkable broad bandgap characteristics by bandgap complementarity,and the simulation results verify a 99%vibration attenuation amplitude can be obtained in the frequency of20 k Hz—100 k *** the fabrication of the proposed hybrid configurational star-shaped metamaterial by 3D printing technique,the transmission loss experiments are performed,and the experimental results indicate that the fabricated metamaterial has the characteristics of broadband vibration attenuation and an amplitude greater than 85%attenuation for the target *** results demonstrate that the hybrid configurational star-shaped metamaterials can effectively widen the bandgap and realize high efficiency attenuation,which has capability for the vibration attenuation in the application of highprecise equipment.

关键词： Star-shaped metamaterials Broadband Vibration attenuation Low-frequency ultrasound vibration Transmission loss

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Modified constitutive models for Inconel 718 considering current density and temperature in electrically assisted forming process

引用

Chinese Journal of Aeronautics 2024年第2期37卷 524-540页

作者： Xuan CUI rui zhao Min WAN School of Mechanical Engineering and Automation Beihang UniversityBeijing 100191China Jiangxi Research Institute of Beihang University Jiangxi 330000China

Electrically Assisted Forming(EAF)technology has obvious advantages in material *** develop an effective constitutive model considering electrical effects,room temperature and electrically assisted quasi-static uniaxial tensile tests were conducted using ultrathin nickelbased superalloy plates with a thickness of 0.25 *** research focused on the two most widely recognized effects:the Joule thermal and the electric athermal *** mechanism of current action can be divided into two scenarios:one considering the Joule thermal effect only,and the other considering both effects *** basic constitutive models,namely the Modified-Hollomon model and the Johnson-Cook(J-C)model,were selected to be optimized through the classification of two different situations,and four optimized constitutive models were *** was found that the J-C model with simultaneous consideration of the Joule thermal effect and electric athermal effect had the best prediction effect by comparing the results of these four ***,the accuracy of the optimization model was verified by finite element simulation of the electrically assisted stretching optimization *** results show that the constitutive model can effectively predict the temperature effect caused by the Joule heat effect and the athermal effect of current on the material.

关键词： Joule heating Elastoplasticity Plastic deformation Superalloys Constitutive models

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Characterization of the current crowding effect on chip surface using a quantum wide-field microscope

引用

Chinese Optics Letters 2024年第6期22卷 123-128页

作者： rui zhao Ding Wang Huan Fei Wen Yunbo shi Jun Tang Jun Liu Science and Technology on Electronic Test&Measurement Laboratory North University of ChinaTaiyuan 030051China

We characterize the current crowding effect for microwave radiation on a chip surface based on a quantum wide-field microscope combining a wide-field reconstruction technique. A swept microwave signal with the power of 0–30 d Bm is supplied to a dumbbell-shaped microstrip antenna, and the significant differences in microwave magnetic-field amplitudes attributed to the current crowding effect are experimentally observed in a 2.20 mm ×1.22 mm imaging area. The normalized microwave magnetic-field amplitude along the horizontal geometrical center of the image area further demonstrates the feasibility of the characterization of the current crowding effect. The experiments indicate the proposal can be qualified for the characterization of the anomalous area of the radio-frequency chip surface.

关键词： current crowding effect microwave field on chip surface quantum wide-field microscope nitrogen-vacancy center

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Armoring lithium metal anode with soft±rigid gradient interphase toward high-capacity and long-life all-solid-state battery

引用

Green Energy & Environment 2024年第8期9卷 1279-1289页

作者： rui Zhang Biao Chen Yuhan Ma Yue Li Junwei Sha Liying Ma Chunsheng shi Naiqin zhao School of Materials Science and Engineering and Tianjin Key Laboratory of Composite and Functional Materials Tianjin University Joint School of National University of Singapore and Tianjin University International Campus of Tianjin University Department of Chemical and Biomolecular Engineering National University of Singapore Collaborative Innovation Centre of Chemical Science and Engineering

Solid polymer electrolytes （SPEs） are highly promising for realizing high-capacity,low-cost,and safe Li metal ***,the Li dendritic growth and side reactions between Li and SPEs also plague these ***,a fluorinated lithium salt coating （FC） with organicinorganic gradient and soft-rigid feature is introduced on Li surface as an artificial protective layer by the in-situ reaction between Li metal and fluorinated carboxylic *** FC layer can improve the interface stability and wettability between Li and SPEs,assist the transport of Li ions,and guide Li nucleation,contributing to a dendrite-free Li deposition and long-lifespan Li metal *** symmetric cell with FC-Li anodes exhibits a high areal capacity of 1 mAh cm-2at 0.5 mA cm-2,and an ultra-long lifespan of 2000 h at a current density of 0.1 m A ***,the full cell paired with the LiFePO4cathode exhibits improved cycling stability,remaining 83.7%capacity after 500 cycles at 1 *** matching with the S cathode,the FC layer can prevent the shuttle effect,contributing to stable and high-capacity Li-S *** work provided a promising way for the construction of stable all-solid-state lithium metal batteries with prolonged lifespan.

关键词： All-solid-state battery Solid polymer electrolyte Li metal anode Li nucleation Interface stability

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Biophysical-driven piezoelectric and aligned nanofibrous scaffold promotes bone regeneration by re-establishing physiological electrical microenvironment

引用

Nano Research 2024年第8期17卷 7376-7393页

作者： Aoao Wang Xinbo Ma Yafeng Yang Guoliang shi Liwei Han Xiantong Hu rui shi Jun Yan Quanyi Guo Yantao zhao Senior Department of Orthopedics the Fourth Medical Center of PLA General HospitalBeijing 100048China Department of Chemistry Capital Normal UniversityBeijing 100048China National Center for Orthopaedics Beijing Research Institute of Traumatology and OrthopaedicsBeijing Jishuitan HospitalCapital Medical UniversityBeijing 100035China Xijing 986 Hospital Department The Fourth Military Medical UniversityXi'an 710032China Institute of Orthopedics Chinese PLA General HospitalBeijing Key Laboratory of Regenerative Medicine in OrthopedicsKey Laboratory of Musculoskeletal Trauma&War Injuries PLABeijing 100853China

The initial healing stages of bone fracture is a complex physiological process involving a series of spatially and temporally overlapping events,including pathogen clearance,immunological modulation,and *** this study,we have developed a piezoelectric and aligned nanofibrous scaffold composed of ZnO@PCL/PVDF with multiple antibacterial,immunomodulatory,and osteogenic effects using electrospinning *** scaffold’s piezoelectric signal output under ultrasound(US)control can be similar to the physiological electrical signals of healthy bone tissue,creating a truly biomimetic electrical microenvironment in the bone *** vitro studies have shown that ZnO@PCL/PVDF scaffold significantly enhances the proliferation,migration,and osteogenic differentiation of MC3T3-E1 cells under piezoelectric drive provided by ***,the scaffold exhibits inhibitory effects on the growth of *** and ***,as well as the ability to induce M2 macrophage polarization,indicating potent antibacterial and immunomodulatory *** vivo experiments demonstrated that the ZnO@PCL/PVDF scaffold can accelerate the repair of mandibular defects in rats,effectively inhibit bacterial colonization,and reduce inflammatory ***,this study confirms that the newly developed ZnO@PCL/PVDF scaffold effectively promotes bone repair by truly mimicking the endogenous electrical microenvironment and precisely regulating the temporospatial disorders of initial bone healing,thus providing a simple and effective solution for bone defects.

关键词： piezoelectricity bone defect bacterial infection ZnO nanoparticles immunomodulation osteogenesis

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Plasma-exfoliated g-C_(3)N_(4) with oxygen doping: tailoring photocatalytic properties

引用

Frontiers of Chemical Science and Engineering 2024年第2期18卷 27-39页

作者： Yuxin Li Junxin Guo rui Han zhao Wang National Engineering Research Centre of Industry Crystallization Technology School of Chemical Engineering and TechnologyTianjin UniversityTianjin 300072China

Heteroatom doping and defect engineering have been proposed as effective ways to modulate the energy band structure and improve the photocatalytic activity of g-C_(3)N_(4). In this work, ultrathin defective g-C_(3)N_(4) was successfully prepared using cold plasma. Plasma exfoliation reduces the thickness of g-C_(3)N_(4) from 10 nm to 3 nm, while simultaneously introducing a large number of nitrogen defects and oxygen atoms into g-C_(3)N_(4). The amount of doped O was regulated by varying the time and power of the plasma treatment. Due to N vacancies, O atoms formed strong bonds with C atoms, resulting in O doping in g-C_(3)N_(4). The mechanism of plasma treatment involves oxygen etching and gas expansion. Photocatalytic experiments demonstrated that appropriate amount of O doping improved the photocatalytic degradation of rhodamine B compared with pure g-C_(3)N_(4). The introduction of O optimized the energy band structure and photoelectric properties of g-C_(3)N_(4). Active species trapping experiments revealed ·O_(2)^(–) as the main active species during the degradation.

关键词： graphitic carbon nitride cold plasma oxygen doping nitrogen defect visible-light photocatalysis

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Microstructure evolution and mechanical properties of brazing joint for ultra-thin-walled Inconel 718 considering grain size effect and brazing temperature

引用

Chinese Journal of Aeronautics 2024年第2期37卷 541-556页

作者： rui zhao Yueshuai SONG Hui KANG Min WAN School of Mechanical Engineering and Automation Beihang UniversityBeijing 100191China Jiangxi Research Institute of Beihang University Jiangxi 330000China

The systematic investigation of the mechanical properties and microstructure evolution process of ultra-thin-walled Inconel 718 capillary brazing joints is of great significance because of the exceptionally high demands on its *** achieve this objective,this study investigates the impact of three distinct brazing temperatures and five typical grain sizes on the brazed joints’mechanical properties and microstructure evolution *** evolution analysis was conducted based on Electron Back Scatter Diffraction(EBSD),Scanning Electron Microscopy(SEM),X-Ray Diffraction(XRD),High-Resolution Transmission Electron Microscopy(HRTEM),and Focused Ion Beam(FIB).Besides,the mechanical properties and fracture behavior were studied based on the uniaxial tension tests and in-situ tension *** findings reveal that the brazing joint’s strength is higher for the fine-grain capillary than the coarse-grain one,primarily due to the formation of a dense branch structure composed of G-phase in the brazing *** effects of grain size,such as pinning and splitting,are amplified at higher brazing ***,micro-cracks initiate around brittle intermetallic compounds and propagate through the eutectic zone,leading to a cleavage fracture *** fracture stress of fine-grain specimens is higher than that of coarse-grain due to the complex micro-crack ***,this study contributes significantly to the literature by highlighting the crucial impact of grain size on the brazing properties of ultra-thin-walled Inconel 718 structures.

关键词： EYWORDS Ultra-thin-walled structure Brazing Inconel 718 Grain size effect Brazing temperature

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Broadband intelligent programmable metasurface with polarization-modulated self-adaptive electromagnetic functionality switching

引用

Photonics Research 2024年第7期12卷 1395-1409页

作者： XIMING LI rui XU XIAOFENG SUN YUAN zhao zhao YANG GUOHONG DU College of Electronic Engineering Chengdu University of Information TechnologyChengdu 610225China

Programmable metasurfaces have received a great deal of attention due to their ability to dynamically manipulate electromagnetic(EM) waves. Despite the rapid growth, most of the existing metasurfaces require manual control to switch among different functionalities, which poses severe limitations on practical applications. Here, we put forth an intelligent metasurface that has self-adaptive EM functionality switching in broadband without human participation. It is equipped with polarization discrimination antennas(PDAs) and feedback components to automatically adjust functionalities for the different incident polarization information.

关键词： equipped adjust polarization

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

The Multi-parameter Test of Gravitational Wave Dispersion with Principal Component Analysis

引用

Research in Astronomy and Astrophysics 2024年第5期24卷 140-150页

作者： Zhi-Chu Ma rui Niu Wen zhao CAS Key Laboratory for Research in Galaxies and Cosmology Department of AstronomyUniversity of Science and Technology of ChinaHefei 230026China School of Astronomy and Space Sciences University of Science and Technology of ChinaHefei 230026China

In this work, we consider a conventional test of gravitational wave(GW) propagation which is based on the phenomenological parameterized dispersion relation to describe potential departures from General Relativity(GR)along the propagation of GWs. But different from tests conventionally performed previously, we vary multiple deformation coefficients simultaneously and employ the principal component analysis(PCA) method to remedy the strong degeneracy among deformation coefficients and obtain informative posteriors. The dominant PCA components can be better measured and constrained, and thus are expected to be more sensitive to potential departures from the waveform model. Using this method we analyze ten selected events and get the result that the combined posteriors of the dominant PCA parameters are consistent with GR within 99.7% credible intervals. The standard deviation of the first dominant PCA parameter is three times smaller than that of the original dispersion parameter of the leading order. However, the multi-parameter test with PCA is more sensitive to not only potential deviations from GR but also systematic errors of waveform models. The difference in results obtained by using different waveform templates hints that the demands of waveform accuracy are higher to perform the multiparameter test with PCA. Whereas, it cannot be strictly proven that the deviation is indeed and only induced by systematic errors. It requires more thorough research in the future to exclude other possible reasons in parameter estimation and data processing.

关键词： gravitational waves-gravitation-black hole physics

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：