检索结果-南通市图书馆

Electromagnetic characteristic analysis and design of a linear motor used for ultra-high-speed EMS maglev train

Science China(Technological Sciences) 2024年第6期67卷 1957-1973页

作者： GAO han shi TingNa GAO XinMai lEI YanXiao YAN Dong GUO liYan YAN Yan College of Electrical Engineering Zhejiang UniversityHangzhou310027China Zhejiang University Advanced Electrical Equipment Innovation Center Hangzhou311107China State Key laboratory of High-speed Maglev Transportation Technology Qingdao266100China CRRC Qingdao Sifang Co.ltd. Qingdao266111China

The operating speed of the commercial electromagnetic suspension(EMS)maglev train has been over 430 km/h,making it the fastest means of land *** the increasing demands of people travel.ng,it is necessary to further improve the operating speed of maglev *** to examine whether the existing EMS system can meet the requirements of ultra-highspeed operation(more than 600 km/h),the electromagnetic characteristics of an EMS linear motor under the operating speed of 600–1000 km/h fed by a square-wave voltage supply is investigated in this ***,an electromagnetic field model of the EMS system under the square-wave voltage supply is established to investigate its electromagnetic performance,e.g.,the characteristics of phase current,the magnetic flux density,and the electromagnetic ***,the relationship between the harmonic components of the air-gap magnetic flux density and electromagnetic force is investigated using the two-dimensional fast Fourier transform(2D-FFT)to reveal the mechanism of electromagnetic force ***,to address the issues of excessive armature current density and significant electromagnetic force ripple,the linear motor is re-designed by enlarging the stator slot area and reshaping the mover's main magnetic ***,the Taguchi method is used to further improve the electromagnetic characteristics of the linear electric ***,the effectiveness of the proposed optimal design is validated by the finite-element analysis(FEA)based co-simulation.

关键词： ultra-high-speed maglev transportation electromagnetic suspension(EMS) linear motor electromagnetic force ripple suppression

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Biotoxicity dynamic change and key toxic organics identification of coal chemical wastewater al.ng a novel full-scale treatment process

引用

Journal of Environmental Sciences 2024年第4期138卷 277-287页

作者： Weiwei Ma Xiaoqi Zhang Hongjun han Xueqing shi Qiaoping Kong Tong Yu Fei Zhao School of Environmental and Municipal Engineering Qingdao University of TechnologyQingdao 266520China State Key laboratory of Urban Water Resource and Environment Harbin Institute of TechnologyHarbin 150090China

It is particularly important to comprehensively assess the biotoxicity variation of industrial wastewater al.ng the treatment process for ensuring the water environment ***,intensive studies on the biotoxicity reduction of industrial wastewater are still *** this study,the toxic organics removal and biotoxicity reduction of coal chemical wastewater(CCW)al.ng a novel full-scale treatment process based on the pretreatment process-anaerobic process-biological enhanced(BE)process-anoxic/oxic(A/O)process-advanced treatment process was *** process performed great removal efficiency of COD,total phenol,NH_(4)^(+)-N and total *** the biotoxicity variation al.ng the treatment units was analyzed from the perspective of acute biotoxicity,genotixicity and oxidative *** results indicated that the effluent of pretreatment process presented relatively high acute biotoxicity to Tetrahymena *** the acute biotoxicity was significantly reduced in BE-A/O *** the genotoxicity and oxidative damage to Tetrahymena thermophila were significantly decreased after advanced *** polar organics in CCW were identified as the main biotoxicity *** were positively correlated with acute biotoxicity,while the nitrogenous heterocyclic compounds and polycyclic aromatic hydrocarbons were positively correlated with *** the biotoxicity was effectively reduced in the novel full-scale treatment process,the effluent still performed potential biotoxicity,which need to be further explored in order to reduce environmental risk.

关键词： Acute biotoxicity Genotoxicity Oxidative damage Toxic organics Coal chemical wastewater Novel full-scale treatment process

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Research on Gait Trajectory Planning of Wall-Climbing Robot Based on Improved PSO Algorithm

引用

Journal of Bionic Engineering 2024年第4期21卷 1747-1760页

作者： Jian li Xianlin shi Peng liang Yanjun li Yilin lv Mingyue Zhong Zezhong han School of Mechanical and Automotive Engineering Guangxi University of Science and TechnologyLiuzhou545006China

In order to reduce the labor intensity of high-altitude workers and realize the cleaning and maintenance of high-rise building exteriors,this paper proposes a design for a 4-DOF bipedal wall-climbing bionic robot inspired by the inchworm’s *** robot utilizes vacuum adsorption for vertical wall attachment and legged movement for *** enhance the robot’s movement efficiency and reduce wear on the adsorption device,a gait mimicking an inchworm’s movement is planned,and foot trajectory planning is performed using a quintic polynomial *** velocity constraints,foot trajectory optimization is achieved using an improved Particle Swarm Optimization(PSO)algorithm,determining the quintic polynomial function with the best fitness through ***,through comparative experiments,the climbing time of the robot closely matches the simulation results,validating the trajectory planning method’s accuracy.

关键词： Bionic robot Wall-climbing robot PSO Gait planning Trajectory planning

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Biophysical-driven piezoelectric and aligned nanofibrous scaffold promotes bone regeneration by re-establishing physiological electrical microenvironment

引用

Nano Research 2024年第8期17卷 7376-7393页

作者： Aoao Wang Xinbo Ma Yafeng Yang Guoliang shi liwei han Xiantong Hu Rui shi Jun Yan Quanyi Guo Yantao Zhao Senior Department of Orthopedics the Fourth Medical Center of PLA General HospitalBeijing 100048China Department of Chemistry Capital Normal UniversityBeijing 100048China National Center for Orthopaedics Beijing Research Institute of Traumatology and OrthopaedicsBeijing Jishuitan HospitalCapital Medical UniversityBeijing 100035China Xijing 986 Hospital Department The Fourth Military Medical UniversityXi'an 710032China Institute of Orthopedics Chinese PLA General HospitalBeijing Key Laboratory of Regenerative Medicine in OrthopedicsKey Laboratory of Musculoskeletal Trauma&War Injuries PLABeijing 100853China

The initial heal.ng stages of bone fracture is a complex physiological process involving a series of spatially and temporally overlapping events,including pathogen clearance,immunological modulation,and *** this study,we have developed a piezoelectric and aligned nanofibrous scaffold composed of ZnO@PCl/PVDF with multiple antibacterial,immunomodulatory,and osteogenic effects using electrospinning *** scaffold’s piezoelectric signal output under ultrasound(US)control can be similar to the physiological electrical signals of healthy bone tissue,creating a truly biomimetic electrical microenvironment in the bone *** vitro studies have shown that ZnO@PCl/PVDF scaffold significantly enhances the proliferation,migration,and osteogenic differentiation of MC3T3-E1 cells under piezoelectric drive provided by ***,the scaffold exhibits inhibitory effects on the growth of *** and ***,as well as the ability to induce M2 macrophage polarization,indicating potent antibacterial and immunomodulatory *** vivo experiments demonstrated that the ZnO@PCl/PVDF scaffold can accelerate the repair of mandibular defects in rats,effectively inhibit bacterial colonization,and reduce inflammatory ***,this study confirms that the newly developed ZnO@PCl/PVDF scaffold effectively promotes bone repair by truly mimicking the endogenous electrical microenvironment and precisely regulating the temporospatial disorders of initial bone heal.ng,thus providing a simple and effective solution for bone defects.

关键词： piezoelectricity bone defect bacterial infection ZnO nanoparticles immunomodulation osteogenesis

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Highly efficient tunable photodetector with a bipolar response in van der Waals heterojunctions

引用

Science China(Technological Sciences) 2024年第2期67卷 639-646页

作者： shi ChaoFan ZhanG shi XIAO KeNing ZhanG liBo han li ZHU Yulin TAng WeiWei lIU Changl.ng lI GuanHai CHEN XiaoShuang College of Physics and Optoelectronic Engineering Hangzhou Institute for Advanced StudyUniversity of Chinese Academy of Sciences Hangzhou310024China State Key laboratory of Infrared Physics Shanghai Institute of Technical PhysicsChinese Academy of SciencesShanghai 200083China

The heterojunction integration of two-dimensional(2D)materials via van der Waals(vdW)forces,unencumbered by lattice and processing constraints,constitutes an efficacious approach to enhance the overall optoelectronic performance of photodetectors,due to an assortment of distinctive light-matter ***,vdW heterojunction photodetectors based on transition metal dichalcogenides(TMDs)face an inevitable trade-off between low dark currents and high responsivity,curtail.ng the application potential of myriad novel optoelectronic components in sensing,spectral,and communication *** this study,we present the successful actualization of a highly sensitive,self-powered,and gate-tunable bipolar response *** mechanisms underlying photocurrent generation were scrutinized via bias-,power-,and position-dependent mapping photoresponse measurements,identifying the photovoltaic effect,which is attributable to the Schottky junction’s built-in electric field,as the predominant *** prototype Au-WS2-graphene photodetector exhibits a remarkable light on/off ratio of 1.2×10^(6),a specific detectivity of 6.12×10^(11)cm H^(z1/2)W^(-1)with 20μs response time at 638 *** wide gate-tunable responsivity provides an adjustability scope,ranging from 0.9 to 3.1 A W^(-1).Notably,the device demonstrates an exceptional linear photocurrent response,with a linear dynamic range(lDR)value approximating 130 dB,which significantly surpasses that of other photodetectors based on TMDs.

关键词： WS2/graphene van der Waals heterojunction gate-tunable bipolar response

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Rapid detection of nanoplastic particles by a luminescent Tb-based coordination polymer

引用

Chinese Chemical letters 2024年第5期35卷 529-533页

作者： Tiankai Sun Hui Min Zongsu han liang Wang Peng Cheng Wei shi Department of Chemistry College of ChemistryNankai UniversityTianjin 300071China State Key laboratory of Separation Membranes and Membrane Processes School of Environmental Science and EngineeringTiangong UniversityTianjin 300387China Key laboratory of Advanced Energy Materials Chemistry(MOE) Frontiers Science Center for New Organic Matter and Renewable Energy Conversion and Storage Center(RECAST)College of ChemistryNankai UniversityTianjin 300071China Haihe laboratory of Sustainable Chemical Transformations Tianjin 300192China

Nanoplastics(NPs)in aqueous environment have become a category of emerging pollutants on account of their potential risks to both human health and *** detection of NPs is a great chall.nge due to the lack of sensitive and selective sensing materials with fast response time and wide sensing range of particle ***,a Tb-based coordination polymer has been synthesized for luminescent detection of nanopolystyrene with different particle sizes in aqueous solutions,showing a low limit of detection,fast response time within 10 s and high selectivity in the presence of other ***“turn-on”sensing mechanism is studied in *** work provides a facile method for the fast detection of NPs.

关键词： Coordination polymer Nano polystyrene luminescent detection Sensing mechanism Water safety

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Understanding the Thermal Impedance of Silicone Rubber/Hexagonal Boron Nitride Composites as Thermal Interface Materials

引用

Chinese Journal of Polymer Science 2024年第3期42卷 352-363,I0008页

作者： Yuan Ji shi-Da han Hong Wu Shao-Yun Guo Feng-Shun Zhang Jian-Hui Qiu The State Key laboratory of Polymer Materials Engineering Sichuan Provincial Engineering Laboratory of Plastic/Rubber Complex Processing TechnologyPolymer Research InstituteSichuan UniversityChengdu 610065China Institute of Chemical Materials China Academy of Engineering PhysicsMianyang 621900China Department of Mechanical Engineering Faculty of Systems Science and TechnologyAkita Prefectural UniversityAkita 015-0055Japan

Silicone rubber(SR) composites are most widely used as thermal interface materials(TIMs) for electronics heat dissipation. Thermal impedance as the main bottleneck limiting the performance of TIMs is usually neglected. Herein, the thermal impedance of SR composites loaded with different levels of hexagonal boron nitride(h-BN) as TIMs was elaborated for the first time by the ASTM D 5470 standard test and finite element analysis. It was found that elastic modulus and surface roughness of SR composites increased with the increase of h-BN content, indicating that the conformity was reduced. When the assembly pressure was 0.69 MPa, there existed an optimal h-BN content at which the contact resistance was minimum(0.39 K·cm^(2)·W^(-1)). Although the decreased bond line thickness(BlT) by increasing the assembly pressure was beneficial to reduce the thermal impedance, the proper assembly pressure should be selected to prevent the warpage of the contact surfaces and the increase in contact resistance, according to the compression properties of the SR composites. This study provides valuable insights into fabrication of high-performance TIMs for modern electronic device applications.

关键词： Thermal interface materials Hexagonal boron nitride Thermal impedance Surfaces

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Mechanical properties of multi-scale germanium specimens from space solar cells under electron irradiation

引用

Chinese Journal of Aeronautics 2024年第1期37卷 173-185页

作者： Jian QIU Maliya HEINI Jusha MA Wenjia han Xunchun WAng Jun YIN Yan shi Cunfa GAO State Key laboratory of Mechanics and Control of Mechanical Structures Nanjing University of Aeronautics and AstronauticsNanjing 210016China School of Chemistry and Civil Engineering Shaoguan UniversityShaoguan 512005China Key laboratory of Functional Materials and Devices for Special Environments of Chinese Academy of Sciences Chinese Academy of SciencesUrumqi 830011China Shanghai Institute of Space Power-Sources Shanghai 200245China

During l.ng-term service in space,Gallium Arsenide(GaAs)solar cells are directly exposed to electron irradiation which usually causes a dramatic decrease in their *** the multilayer structure of solar cells,the germanium(Ge)layer occupies the majority of the thickness as the *** to the intrinsic brittleness of semiconductor material,there exist various defects during the preparation and assembly of solar cells,the influences of which tend to be intensified by the irradiation *** this work,first,Ge specimens for mechanical tests were prepared at scales from microscopic to ***,after different doses of electron irradiation,the mechanical properties of the Ge specimens were *** experimental results demonstrate that electron irradiation has an obvious effect on the mechanical property variation of Ge in diverse *** four-point bending test indicates that the elastic modulus,fracture strength,and maximum displacement of the Ge specimens all increase,and reach the maximum value at the irradiation dose of 1×10^(15)e/cm^(2).The micrometer scale cantilever and nanoindentation tests present similar trends for Ge specimens after *** Force Microscope(AFM)also observed the change in surface ***,a fitting model was established to characterize the relation between modulus change and electron irradiation dose.

关键词： Electron irradiation Germanium Mechanical properties Multi-scale Space solar cells

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Influence of powder oxidation on powder properties and formability in H13 hot-work steels processed by electron beam melting

引用

Journal of Iron and Steel Research International 2024年第4期31卷 924-932页

作者： Wei liu Yan Wang li-xiong han Ying-kang Wei Hui-ping Tang shi-feng liu School of Metallurgical Engineering Xi'an University of Architecture and TechnologyXi'an 710055ShaanxiChina School of Engineering Zhejiang University City CollegeHangzhou 310015ZhejiangChina

The oxygen content of metal powder is decisive for the recyclability of *** research on the effect of oxygen content on powder properties and material formability has practical significance for economical production with additive manufacturing while preventing the waste of ***,we deliberately oxidized the powder by baking at high temperature to increase the oxygen content in the powder and gave the calculation method of the oxygen content in the powder oxidation *** majority of oxygen element was found in the oxide particles in the powder and the oxide flm on the powder surface,which did affect the flowability of the *** is worth noting that the increase in the oxygen content does not change the phase of H13 steel,but it can promote the molten pool flow and obtain a smoother *** increase in the oxygen content in the powder is not the decisive factor for the formability and defects of the printed *** is the combined effect of the powder deformation,the increase in the oxygen content,and the impurity pollution after repeated use,which leads to the limitation of repeated utilization of the powder.

关键词： Additive manufacturing Electron beam melting H13 steel powder-Powder oxidation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Two-dimensional precise figuring of 500 mm-l.ng X-ray mirror using one-dimensional ion beam system

引用

Advances in Manufacturing 2024年第1期12卷 177-184页

作者： Qiu-shi Huang han-Dan Huang Qiao-Yu Wu Jun Yu Zhong Zhang Zhan-Shan Wang MOE Key laboratory of Advanced Micro-Structured Materials Institute of Precision Optical Engineering(IPOE)School of Physics Science and EngineeringTongji UniversityShanghai200092People’s Republic of China Shanghai Professional Technical Service Platform for Full-Spectrum and High-Performance Optical Thin Film Devices and Applications Tongji UniversityShanghai200092People’s Republic of China Shanghai Frontiers Science Center of Digital Optics Tongji UniversityShanghai200092People’s Republic of China

In this study,a new method was developed to realize two-dimensional(2D)figure correction of grazing-incidence X-ray mirrors using a one-dimensional(1D)ion-beam figuring system.A mask of holes was specifically designed to generate removal functions at different widths and extend the figuring capability over a wide ***,a l.ng mirror could be *** this method,the surface height root-mean-square(RMS)error of the center area of 484 mm×16 mm was reduced from 11.49 nm to 2.01 nm,and the 1D meridional RMS error reached 1.0 *** proposed method exhibits high precision and cost effectiveness for production of l.ng X-ray mirrors.

关键词： l.ng-size mirrors Ion beam figuring Two-dimensional figure correction Mask

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：