检索结果-南通市图书馆

Stability of bedded rock slopes subjected to hydro-fluctuation and associated strength deterioration

在线全文

学校读者我要写书评

暂无评论

Journal of Rock Mechanics and Geotechnical engineering 2024年第8期16卷 3233-3257页

作者： bin xu Xinrong Liu Yue Liang Xiaohan Zhou Zuliang zhong School of River and Ocean engineering Chongqing Jiaotong UniversityChongqing400074China School of Civil engineering Chongqing UniversityChongqing400045China

Reservoir-induced earthquakes(RIEs)occur frequently in the Three Gorges Reservoir Area(TGRA)and the rock mass strength of the hydro-fluctuation belt(HFB)deteriorates severely due to the reservoirinduced seismic *** models of typical bedded rock slopes(BRSs),***(GIS),moderately(MIS),and steeply(SIS)inclined slopes,were proposed according to field *** dynamic response mechanism and stability of the BRSs,affected by the rock mass deterioration of the HFB,were investigated by the shaking table test and the universal distinct element code(UDEC)***,the amplification coefficient of the peak ground acceleration(PGA)of the slope was gradually attenuated under multiple seismic loads,and the acceleration response showed obvious“surface effect”and“elevation effect”in the horizontal and vertical directions,***“S-type”cubic function and“steep-rise type”exponential function were used to characterize the cumulative damage evolution of the slope caused by microseismic waves(low seismic waves)and high seismic waves,*** to the dynamic responses of the acceleration,cumulative displacement,rock pressure,pore water pressure,damping ratio,natural frequency,stability coefficient,and sliding velocity of the slope,the typical evolution processes of the dynamic cumulative damage and instability failure of the slope were generalized,and the numerical and experimental results were *** the dynamic effects of the slope height(SH),slope angle(SA),bedding plane thickness(BPT),dip angle of the bedding plane(DABP),dynamic load amplitude(DLA),dynamic load frequency(DLF),height of water level of the hydro-fluctuation belt(HWLHFB),degradation range of the hydro-fluctuation belt(DRHFB),and degradation shape of the hydro-fluctuation belt(DSHFB),the sensitivity of factors influencing the slope dynamic stability using the orthogonal analysis method(OAM)was DLA>DRHFB>SA>SH>DLF>HWLHFB>DSHFB>DABP>BPT.

关键词： Bedded rock slopes Hydro-fluctuation belt Shaking table test UDEC simulation Dynamic response mechanism

Thermally modulated photoelectronic synaptic behavior in HfS_(2)/VO_(2) heterostructure

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Rare Metals 2024年第8期43卷 3798-3809页

作者： Le wang Lin wang Xiao-Yun Ye Xiong-Hu xu Li-Yan shang Ya-Wei Li Jin-zhong Zhang Liang-Qing Zhu Zhi-Gao Hu Technical Center for Multifunctional Magneto-Optical Spectroscopy(shanghai) Engineering Research Center of Nanophotonics&Advanced Instrument(Ministry of Education)Department of PhysicsSchool of Physics and Electronic ScienceEast China Normal UniversityShanghai 200241China Collaborative Innovation Center of Extreme Optics Shanxi UniversityTaiyuan 030006China

Neuromorphic computing is known for its efficient computational speed,low latency,and reduced power consumption,which is considered a pivotal technology to overcome the von Neumann *** synapses are an indispensable component of neuromorphic computational artificial neural *** guarantee effective and precise processing of optical signals,it must have a high responsivity,detectivity,and the ability to adapt to various ***,a synaptic transistor based on the HfS_(2)/VO_(2) heterojunction with a responsivity of8.6×10^(3) A·W^(-1)and a detectivity of 1.26×10^(14)Jones at405 nm laser was ***,the typical synaptic behavior was successfully simulated,including postsynaptic currents(PSCs),the transition from shortterm plasticity(STP)to long-term plasticity(LTP).When VO_(2) converts from the semiconductor state to the metal state,the HfS_(2)/VO_(2) heterojunction transforms into a Schottky heterojunction from a TypeⅡheterojunction with ***'s important,the heterojunction still exhibits excellent responsivity and detectivity,as well as stability of synaptic *** addition,the classical Pavlovian conditioning experiment is simulated under different laser intensity to study the brain's associative learning *** results demonstrate that the HfS_(2)/VO_(2) heterojunction synapse exhibits significant responsivity and detectivity and is adaptable to high-temperature environments,showing great potential for neuromorphic computational applic ations.

关键词： HfS_(2) VO_(2) Phase transition Photoelectric synapse Heterojunction

Recent advances and key perspectives of in-situ studies for oxygen evolution reaction in water electrolysis

在线全文

学校读者我要写书评

暂无评论

Green Energy & Environment 2024年第10期9卷 1497-1517页

作者： Yi wang Zichen xu Xianhong Wu zhong-Shuai Wu State Key Laboratory of Catalysis Dalian Institute of Chemical Physics Chinese Academy of Sciences University of Chinese Academy of Sciences Shijingshan District Dalian National Laboratory for Clean Energy Chinese Academy of Sciences

Electricity-driven water splitting to produce hydrogen is one of the most efficient ways to alleviate energy crisis and environmental pollution problems, in which the anodic oxygen evolution reaction(OER) is the key half-reaction of performance-limiting in water splitting. Given the complicated reaction process and surface reconstruction of the involved catalysts under actual working conditions, unraveling the real active sites, probing multiple reaction intermediates and clarifying catalytic pathways through in-situ characterization techniques and theoretical calculations are essential. In this review, we summarize the recent advancements in understanding the catalytic process, unlocking the water oxidation active phase and elucidating catalytic mechanism of water oxidation by various in-situ characterization techniques. Firstly, we introduce conventionally proposed traditional catalytic mechanisms and novel evolutionary mechanisms of OER, and highlight the significance of optimal catalytic pathways and intrinsic stability. Next, we provide a comprehensive overview of the fundamental working principles,different detection modes, applicable scenarios, and limitations associated with the in-situ characterization techniques. Further, we exemplified the in-situ studies and discussed phase transition detection, visualization of speciation evolution, electronic structure tracking, observation of reaction active intermediates, and monitoring of catalytic products, as well as establishing catalytic structure–activity relationships and catalytic mechanism. Finally, the key challenges and future perspectives for demystifying the water oxidation process are briefly proposed.

关键词： In-situ studies Water splitting Oxygen evolution reaction Catalytic mechanism

Advances of embedded resistive random access memory in industrial manufacturing and its potential applications

在线全文

学校读者我要写书评

暂无评论

International Journal of Extreme Manufacturing 2024年第3期6卷 175-214页

作者： Zijian wang Yixian Song Guobin Zhang Qi Luo Kai xu Dawei Gao bin Yu Desmond Loke Shuai zhong Yishu Zhang College of Integrated Circuits Zhejiang UniversityHangzhouZhejiang 3112000People’s Republic of China ZJU-Hangzhou Global Scientific and Technological Innovation Center Hangzhou 310027People’s Republic of China Department of Science Mathematics and TechnologySingapore University of Technology and DesignSingapore 487372Singapore Guangdong Institute of Intelligence Science and Technology HengqinZhuhai 519031People’s Republic of China

Embedded memory,which heavily relies on the manufacturing process,has been widely adopted in various industrial *** the field of embedded memory continues to evolve,innovative strategies are emerging to enhance *** them,resistive random access memory(RRAM)has gained significant attention due to its numerousadvantages over traditional memory devices,including high speed(enges and provides insights into the prospects of embedded RRAM in the era of big data and artificial intelligence.

关键词： embedded resistive random access memory industrial manufacturing intelligent computing advanced process node

Auxiliary ball milling to prepare WS_(2)/graphene nanosheets composite for lithium-ion battery anode materials

在线全文

学校读者我要写书评

暂无评论

Tungsten 2024年第1期6卷 124-133页

作者： Yong-Lin Wu Jia-bin Hong Wei-xu zhong Chun-Xiang wang Zhi-Feng Li Sydorov Dmytro Jiangxi Provincial Key Laboratory of Power Batteries and Materials Jiangxi University of Science and TechnologyGanzhou 341000China Faculty of Materials Metallurgy and Chemistry Jiangxi University of Science and TechnologyGanzhou 341000China Institute of Bioorganic Chemistry and Petrochemistry National Academy of Sciences of UkraineKiev 02160Ukraine

A novel nano-WS_(2)/graphene nanosheets(GNSs)composite is obtained by ball milling with xylitol as auxiliary agent and hightemperature *** improves the shear force during ball milling and well overcomes the van der Waals interactions between the interlayer of graphite and WS_(2).Through high-temperature calcination,GNSs and WS_(2) nanosheets can form tight interface *** produced WS_(2)/GNSs composites can be used as anode materials for lithium-ion batteries,while maintaining a high reversible specific capacity of 705 mAh·g^(-1)with the capacity retention of 95%at a current density of 250 mA·g^(-1)after 200 cycles,mainly because WS_(2)/GNSs composites have a higher Li^(+)diffusion coefficient of 2.2×10^(-9)cm^(2)·s^(-1)and a higher specific surface area of 70.10 m^(2)·g^(-1).As a result,the xylitol-assisted ball milling method designed in this work is suitable for extended preparation of peeling of two-dimensional layer materials into nanosheets.

关键词： Lithium-ion battery Anode material WS_(2) Graphene nanosheets Auxiliary ball milling

A crosstalk-free dual-mode sweat sensing system for naked-eye sweat loss quantification via changes in structural reflectance

在线全文

学校读者我要写书评

暂无评论

Bio-Design and Manufacturing 2024年第4期7卷 428-438页

作者： Bowen zhong Hao xu Xiaokun Qin Lingchen Liu Hailong wang Lili wang State Key Laboratory for Superlattices and Microstructures Institute of SemiconductorsChinese Academy of SciencesBeijing 100083China Center of Materials Science and Optoelectronic engineering University of Chinese Academy of SciencesBeijing 100049China

Sweat loss monitoring is important for understanding the body’s thermoregulation and hydration status,as well as for comprehensive sweat *** recent advances,developing a low-cost,scalable,and universal method for the fabrication of colorimetric microfluidics designed for sweat loss monitoring remains *** this study,we propose a novel laserengraved surface roughening strategy for various flexible *** process permits the construction of microchannels that show distinct structural reflectance changes before and after sweat *** leveraging these unique optical properties,we have developed a fully laser-engraved microfluidic device for the quantification of naked-eye sweat *** sweat loss sensor is capable of a volume resolution of 0.5µL and a total volume capacity of 11µL,and can be customized to meet different performance ***,we report the development of a crosstalk-free dual-mode sweat microfluidic system that integrates an Ag/AgCl chloride sensor and a matching wireless measurement flexible printed circuit *** integrated system enables the real-time monitoring of colorimetric sweat loss signals and potential ion concentration signals without ***,we demonstrate the potential practical use of this microfluidic sweat loss sensor and its integrated system for sports medicine via on-body studies.

关键词： Sweat loss sensor Microfluidic design Structural reflectance Dual-mode integration Crosstalk-free

Recyclable Technology of Thermosetting Resins for High Thermal Conductivity Materials Based on Physical Crushing

在线全文

学校读者我要写书评

暂无评论

Energy & Environmental Materials 2024年第6期7卷 378-387页

作者： An zhong Congzhen Xie bin Gou Jiangang Zhou Huasong xu Song Yu Daoming Zhang Chunhui Bi Hangchuan Cai Licheng Li Rui wang School of Electric Power South China University of TechnologyGuangzhou 510641China

Epoxy resin,characterized by prominent mechanical and electric-insulation properties,is the preferred material for packaging power electronic ***,the efficient recycling and reuse of epoxy materials with thermally cross-linked molecular structures has become a daunting ***,we propose an economical and operable recycling strategy to regenerate waste epoxy resin into a high-performance *** particle size of waste epoxy micro-spheres(100–600μm)with core-shell structure is obtained through simple mechanical crushing and boron nitride surface *** using smattering epoxy monomer as an adhesive,an eco-friendly composite material with a“brick-wall structure”can be *** continuous boron nitride pathway with efficient thermal conductivity endows eco-friendly composite materials with a preeminent thermal conductivity of 3.71 W m^(−1)K^(−1)at a low content of 8.5 vol%h-BN,superior to pure epoxy resin(0.21 W m^(−1)K^(−1)).The composite,after secondary recycling and reuse,still maintains a thermal conductivity of 2.12 W m^(−1)K^(−1)and has mechanical and insulation properties comparable to the new epoxy resin(energy storage modulus of 2326.3 MPa and breakdown strength of 40.18 kV mm^(−1)).This strategy expands the sustainable application prospects of thermosetting polymers,offering extremely high economic and environmental value.

关键词： brick-wall structure epoxy thermosetting physical recycling thermal management

Multi-objective optimization of a high speed on/off valve for dynamic performance improvement and volume minimization

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2024年第10期37卷 435-444页

作者： Qi zhong Junxian wang enguang xu Cheng YU Yanbiao LI College of Mechanical engineering Zhejiang University of TechnologyHangzhou 310023China Key Laboratory of Special Purpose Equipment and Advanced Processing Technology Ministry of Education and Zhejiang ProvinceZhejiang University of TechnologyHangzhou 310023China

Hydraulic circuits with high speed on/off valve(HSV)for servo control have become commonplace in ***,the individual valve that is not volume-optimized results in a large total size of hydraulic control system,diminishing the *** address this issue,the high-precision equivalent reluctance model of the HSV is established by employing an equivalent magnetic circuit,on which the dynamic characteristic of the HSV,as well as the effects of structural parameters on switching behaviour,are *** on this model,multi-objective optimization is adopted to design an HSV with faster dynamic performance and smaller volume,NSGA-II genetic algorithm is applied to obtain the Pareto front of the desired *** assess the impact before and after optimization,an HSV based on the optimized structure is manufactured and *** experimental results show that the optimized HSV reduces 47.1%of its solenoid volume while improving opening and closing dynamic performance by 14.8%and 43.0%respectively,increasing maximum switching frequency by 6.2%,and expanding flow linear control area by 6.7%.These results validate the optimized structure and indicate that the optimization method provided in the paper is beneficial for developing superior HSV.

关键词： High speed on/off valve Dynamic response Volume Multiobjective optimization NSGA-II genetic algorithm

Heat distribution model under hydrogen-rich low-carbon conditions in blast furnace

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第3期31卷 584-594页

作者： Gang wang Jun xu Kun He zhong-ping Zou Hao Bai School of Metallurgy and Ecological engineering University of Science and Technology BeijingBeijing 100083China CISDI Low-Carbon Blast Furnace Research Office MCC Low-Carbon Technology Research InstituteChongqing 401122China

Low carbon development of blast furnaces is one of the key technological directions in the current development of *** to the differences in the physical and chemical properties of hydrogen and carbon,hydrogen-rich media entering a blast furnace will change the heat distribution,thus affecting the stability of ***,a heat distribution model was proposed to study the temperature distribution in a blast furnace,simultaneously considering gas-solid heat exchange,slag and iron melting,and chemical *** model was used to analyze the temperature distribution of a 2300 m^(3) blast furnace and was verified via comparison with actual production ***,the effects of the injection rate of hydrogen-rich media,H2 concentration,and oxygen enrichment rate of the blast on the temperature distribution were *** indicated that the increase in the injection rate of the hydrogen-rich media decreased the amount of direct reduction and led to an increase in the furnace ***,an increase in the oxygen enrichment rate led to a decrease in the furnace temperature,but could reduce the solid fuel ratio,while the change in H2 concentration had less effect on the temperature *** combination of hydrogen-rich media injection and the increase in the oxygen enrichment rate would help to adjust the temperature distribution to the same level as the conventional blast furnace conditions.

关键词： Heat distribution Blast furnace Low-carbon condition Hydrogen enrichment Calculation model