检索结果-南通市图书馆

Journal of Materials Science & Technology 2008年第1期24卷 7-11页

作者： Jong-Kyu baek Hae-wook Kwon School of Materials Science and Engineering Yeungnam University Gyeongsan 712-749 Korea

The effects of processing variables on the fluidity of hypereutectic Al-Si alloy melt during squeeze casting were *** maximum fluidity of Al-16.0%Si alloy during squeeze casting was obtained under the applied pressure of 30 *** fluidity increased with *** fluidity increased with silicon content in the range from 12.0% to 20.0%.That was decreased respectively by eutectic modification and primary silicon refinement.

关键词： Squeeze casting Al-alloy Fluidity Melt treatment

Kinetics modeling for the mixed reforming of methane over Ni-CeO_2/MgAl_2O_4 catalyst

在线全文

学校读者我要写书评

暂无评论

Journal of Natural Gas Chemistry 2011年第1期20卷 9-17页

作者： Hye Jin Jun Myung-June Park seung-Chan baek Jong wook Bae Kyoung-Su Ha Ki-Won Jun Department of Chemical Engineering Ajou University Petroleum Displacement Technology Research Center Korea Research Institute of Chemical Technology (KRICT)

Kinetics model was developed for the mixed （steam and dry） reforming of methane, which is useful for the control of H2/CO ratio. The equilibrium constants of reaction rate were determined using the experimental equilibrium data at different reaction temperatures, while the forward reaction rate constants were estimated using the experimental data under non-equilibrium （high inert fraction and high space velocity） conditions. The comparison between calculated and experimental data clearly showed that the developed model described satisfactorily, and further analysis using the parametric sensitivity determined the wall temperature and CO2 fraction in the feed gas as effective parameters for the manipulation of CH4 conversion and H2/CO ratio of synthesis gas under the equilibrium condition. Meanwhile, the inert fraction, rather than the residence time, was selected as additional parameter under non-equilibrium condition.

关键词： mixed reforming nickel-based catalyst kinetics modeling parameter estimation parametric sensitivity

Arthroscopic treatment of iliopsoas tendinitis after total hip arthroplasty with acetabular cup malposition: Two case reports

在线全文

学校读者我要写书评

暂无评论

World Journal of Clinical Cases 2020年第21期8卷 5326-5333页

作者： Heejae Won Kwang-Hwan Kim Jae-wook Jung Shin-Yoon Kim seung-Hoon baek Department of Orthopedic Surgery School of MedicineKyungpook National UniversityKyungpook National University Hospital130 Dongdeok-roJung-GuDaegu 41944South Korea

BACKGROUND Optimal treatment for iliopsoas tendinitis after total hip arthroplasty(THA)with cup malposition,iliopsoas release alone or with cup revision,is controversial,particularly in young,active ***,arthroscopic iliopsoas tendon(IPT)release in these patients has been rarely described,and midterm effects of this procedure on THA longevity and groin pain recurrence remain *** performed arthroscopic IPT release after THA and report midterm outcomes in two young patients with acetabular cup *** SUMMARY In the two patients,groin pain started early after *** examination revealed nonspecific findings,and laboratory tests showed no evidence of *** and computed tomography showed reduced acetabular component anteversion angle and anterior cup prominence of more than 16 *** therapeutic diagnosis,ultrasonography-guided lidocaine with steroid was injected into the IPT *** both patients,groin pain improved initially but worsened after a few ***,the patients underwent arthroscopic IPT release under spinal *** revealed synovitis with fibrous tissues around the IPT and various lesions related to the implants after *** tenotomy and debridement with biopsy were performed;histopathologic studies showed chronic inflammation with synovial *** patients were encouraged to start walking immediately after surgery,and they returned to complete daily function early after *** experienced no recurrence of groin pain or any implant-related problems 5 years *** Arthroscopic IPT release for cup malposition produced excellent midterm outcomes without recurrence of groin pain and implant-related problems.

关键词： Iliopsoas tendinitis Total hip arthroplasty Cup malposition Arthroscopy Tenotomy Case report

Silent advanced large cell neuroendocrine carcinoma with synchronous adenocarcinoma of the colon:A case report

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

World Journal of Gastrointestinal Oncology 2022年第11期14卷 2266-2272页

作者： Hyeon Seok baek Sang wook Kim Soo Teik Lee Ho Sung Park seung Young Seo Department of Internal Medicine Research Institute of Clinical Medicine of Jeonbuk National University-Biomedical Research Institute of Jeonbuk National University HospitalJeonju-si 56445Jeollabuk-doSouth Korea Department of Pathology Jeonbuk National University Medical SchoolJeonjusi 56445Jeollabuk-doSouth Korea

BACKGROUND Large cell neuroendocrine carcinoma(LCNEC)accounts for about 0.25%of colorectal cancer ***,synchronous LCNEC and adenocarcinoma coexistence in the colon is very *** are usually aggressive and have a poor ***,colorectal LCNEC patients complain of abdominal symptoms such as pain,diarrhea or hematochezia because it is often diagnosed as an advanced disease that accompanies metastatic *** SUMMARY We describe a case of relatively asymptomatic synchronous LCNEC and colon adenocarcinoma.A 62-year-old male patient visited our hospital due to anemia detected by a local health *** did not complain of melena,hematochezia or abdominal *** examination was unremarkable and his abdomen was soft,nontender and nondistended with no palpable *** tests revealed anemia with hemoglobin 5.1 g/*** revealed an ulcerofungating lesion in the ascending colon and about a 1.5 cm-sized large sessile polyp in the sigmoid *** biopsy of the ascending colon lesion revealed the ulcerofungating mass that was LCNEC and endoscopic mucosal resection at the sigmoid colon lesion showed a large polypoid lesion that was *** liver,lung,bone and lymph nodes metastasis was found on chest/abdominal computed tomography and positron emission *** patient was diagnosed with advanced colorectal LCNEC with liver,lung,bone and lymph node metastasis(stage IV)and synchronous colonic adenocarcinoma *** this case,no specific symptom except anemia was observed despite the multiple *** patient refused systemic chemotherapy and was discharged after *** We report a case of silent LCNEC of the colon despite the advanced state and synchronous adenocarcinoma.

关键词： Large cell neuroendocrine carcinoma Colon Synchronous Adenocarcinoma Case report

Does proximal femoral nail antirotation achieve better outcome than previous-generation proximal femoral nail?

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

World Journal of Orthopedics 2020年第11期11卷 483-491页

作者： seung-Hoon baek seunggil baek Heejae Won Jee-wook Yoon Chul-Hee Jung Shin-Yoon Kim Department of Orthopedic Surgery Kyungpook National University HospitalDaegu 41944South Korea Department of Orthopedic Surgery School of MedicineKyungpook National UniversityDaegu 41944South Korea Department of Orthopedic Surgery Goodssen HospitalDaegu 42010South Korea

BACKGROUND There are few studies in the literature comparing the clinical outcomes and radiographic results of proximal femoral nail(PFN)and proximal femoral nail antirotation(PFNA)for pertrochanteric femoral fracture(PFF)in elderly *** To evaluate both clinical and radiographic outcomes after fixation with PFN and PFNA in an elderly patient *** One hundred fifty-eight patients older than 65 years with PFF who underwent fixation with either PFN or PFNA were ***-three patients underwent fixation with PFN,whereas 85 were fixed with *** mean follow-up was 2.4 years(range,1-7 years).Clinical outcome was measured in terms of operation time,postoperative function at each follow-up visit,and mortality within one *** evaluation included reduction quality after surgery,Cleveland Index,tip-apex distance(TAD),union rate,time to union,and sliding distance of the screw or *** including nonunion,screw cutout,infection,osteonecrosis of the femoral head,and implant breakage were also *** Postoperative function was more satisfactory in patients who underwent PFNA than in those who underwent PFN(P=0.033).Radiologically,the sliding difference was greater in PFN than in PFNA patients(6.1 and 3.2 mm,respectively,P=0.036).The rate of screw cutout was higher in the PFN group;eight for PFN(11.0%)and two for PFNA patients(2.4%,P=0.027).There were no differences between the two groups in terms of operation time,mortality rate at one year after the operation,adequacy of reduction,Cleveland Index,TAD,union rate,time to union,nonunion,infection,osteonecrosis,or implant *** Elderly patients with PFF who underwent PFNA using a helical blade demonstrated better clinical and radiographic outcomes as measured by clinical score and sliding distance compared with patients who underwent PFN.

关键词： Pertrochanteric fracture Proximal femoral nail Proximal femoral nail antirotation Sliding distance Cutout Outcome

Identification and preoperative optimization of risk factors to prevent periprosthetic joint infection

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

World Journal of Orthopedics 2014年第3期5卷 362-367页

作者： seung-Hoon baek Department of Orthopedic Surgery Kyungpook National University HospitalDaegu 700-721South Korea

Despite significant improvements over the past several decades in diagnosis,treatment and prevention of periprosthetic joint infection(PJI),it still remains a major challenge following total joint *** the devastating nature and accelerated incidence of PJI,prevention is the most important strategy to deal with this challenging problem and should start from identifying risk *** and well-organized optimization of these risk factors in individuals before elective arthroplasty are essential to the ultimate success in reducing the incidence of *** though some risk factors such as demographic characteristics are seldom changeable,they allow more accurate expectation regarding individual risks of PJI and thus,make proper counseling for shared preoperative decision-making *** that increase the risk of PJI,but are potentially modifiable should be optimized prior to elective *** remarkable advances have been achieved in past decades,many questions regarding standardized practice to prevent this catastrophic complication remain *** current study provide a comprehensive knowledge regarding risk factors based on general principles to control surgical siteinfection by the review of current literature and also share own practice at our institution to provide practical and better understandings.

关键词： Total joint arthroplasty Periprosthetic joint infection Prevention Risk factors Preoperative optimization

Structural optimization for ball valve made of CF8M stainless steel

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

中国有色金属学会会刊：英文版 2009年第B09期19卷 258-261页

作者： seung-Gyu KIM Seok-Heum baek Young-Chul PARK Department of Mechanical Engineering Dong-A University

The mechanical and chemical properties of CF8M were studied through experiments. An application of CF8M in valve body was analyzed by using finite element method(FEM) to evaluate the structural safety. An optimization containing several variables based on the response surface method(RSM) was conducted to find the optimum dimension of the valve. The results show that using this process can save valve mass as well as the computational expense effectively.

关键词：结构优化球阀不锈钢化学性能有限元法结构安全最佳尺寸 FEM

Virtual Mold Technique in Thermal Stress Analysis during Casting Process

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2008年第3期24卷 359-363页

作者： Si-Young Kwak Jae-wook baek Jeong-Ho Nam Jeong-Kil Choi E-Design Center Korea Institute of Industrial Technology Department of Virtual Engineering Korea University of Science & Technology

It is important to analyse the casting product and the mold at the same time considering thermal contraction of the casting and thermal expansion of the mold. The analysis considering contact of the casting and the mold induces the precise prediction of stress distribution and the defect such as hot tearing. But it is difficult to generate FEM mesh for the interface of the casting and the mold. Moreover the mesh for the mold domain spends lots of computational time and memory for the analysis due to a number of meshes. Consequently we proposed the virtual mold technique which only uses mesh of the casting part for thermal stress analysis in casting process. The spring bar element in virtual mold technique is used to consider the contact of the casting and the mold. In general, a volume of the mold is much bigger than that of casting part, so the proposed technique decreases the number of mesh and saves the computational memory and time greatly. In this study, the proposed technique was verified by the comparison with the traditional contact technique on a specimen. And the proposed technique gave satisfactory results.

关键词： Casting process Thermal stress analysis Virtual mold

Forecasting promising technology using analysis of patent information:Focused on next generation mobile communications

在线全文

学校读者我要写书评

暂无评论

Journal of Central South University 2014年第11期21卷 4303-4310页

作者： CHOI seung-wook YOU Yen-Yoo NA Kwan-Sik Department of Knowledge Service & Consulting Hansung UniversitySeoul Korea Department of Management Information Systems Seowon UniversityCheongju Korea

In order to forecast promising technologies in the field of next generation mobile communication, various patent indicators were analyzed such as citation per patent, patent family information, patent share, increase rate, and patent activity. These indicators were quantified into several indexes and then integrated into an evaluation score to provide promising technologies. As a result of the suggested patent analysis, four technologies out of twenty two in details classification were selected, which showed outstanding technology competitiveness, high patent share and increasing rates as well as high recent-patent-ratios and triad-patent-family-ratios. Each of the selected technologies scored more than 10 points in total, and the following four technologies were suggested as promising ones in the field of next generation mobile communication: 1) 3GPP based mobile communication, 2) beyond 4G mobile communication, 3) IEEE 802.16 based mobile communication, which are in medium classification of broadband mobile communication system, and 4) testing/certification system of mobile communication, which is in medium classification of mobile communication testing/certification system.

关键词： next generation mobile communication promising technology forecasting patent information patent analysis patent indicators