检索结果-南通市图书馆

Yolk-shell-structured （***.s）9S8 solid-solution powders：Synthesis and application as anode materials for Na-ionbatteries

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano Research 2017年第9期10卷 3178-3188页

作者： Jung hyun Kim yun Chan Kang Department of Materials Science and Engineering Korea University Anam-Dong Seongbuk-Gu Seou1136-713 Republic of Korea

Multicomponent metal sulfide materials with a yolk–shell structure and a single phase were studied for the first time as anode materials for sodium-ion batteries. Yolk–shell-structured Fe–Ni–O powders with a molar ratio of iron and nickel components of 1/1 were prepared via one-pot spray pyrolysis. The prepared Fe–Ni–O powders were transformed into yolk–shell-structured (Fe0.5Ni0.5)9S8 solid-solution powders via a sulfidation process. The initial discharge and charge capacities of the (Fe0.5Ni0.5)9S8 powders at a current density of 1 A·g−1 were 601 and 504 mA·h·g−1, respectively. The discharge capacities of the (Fe0.5Ni0.5)9S8 powders for the 2nd and 100th cycle were 530 and 527 mA·h·g−1, respectively, and their corresponding capacity retention measured from the 2nd cycle was 99%. The (Fe0.5Ni0.5)9S8 powders had high initial discharge and charge capacities at a low current density of 0.1 A·g−1, and the reversible discharge capacity decreased slightly from 568 to 465 mA·h·g−1 as the current density increased from 0.1 to 5.0 A·g−1. The synergetic effect of the novel yolk–shell structure and the multicomponent sulfide composition of the (Fe0.5Ni0.5)9S8 powders resulted in excellent sodium-ion storage performance.

关键词： metal sulfide multicomponent sulfide yolk–shell sodium-ion batteries spray pyrolysis

Stevens-Johnson syndrome and concurrent hand foot syndrome during treatment with capecitabine:A case report

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

World Journal of Clinical Cases 2021年第17期9卷 4279-4284页

作者： Ha Rim Ahn Sang-Kyung Lee hyun Jo Youn seok-Kweon yun Il-Jae Lee Division of Breast and Thyroid Surgery Department of SurgeryJeonbuk National UniversityJeonju 54907South Korea Research Institute of Clinical Medicine of Jeonbuk National University-Biomedical Research Institute of Jeonbuk National University Hospital Jeonju 54907South Korea Department of Dermatology Jeonbuk National University Medical SchoolJeonju 54907South Korea

BACKGROUND Capecitabine is used in combination with lapatinib as palliative treatment for human epidermal growth factor receptor 2-positive metastatic breast *** most frequently reported adverse events attributed to capecitabine include diarrhea,hyperbilirubinemia,and hand-foot syndrome(HFS).A number of cutaneous adverse events have been attributed to capecitabine,including Stevens-Johnson syndrome(SJS)as a rare and potentially life-threatening mucocutaneous *** report the first case involving concurrent SJS and HFS after capecitabine and lapatinib *** SUMMARY A 70-year-old woman with a history of breast cancer treatment visited our hospital for evaluation of painful skin *** weeks earlier,she had been prescribed capecitabine plus lapatinib as treatment for metastatic breast *** subsequently developed worsening erythema and bullae on her palms and soles,as well as reddish macules on her back and chest *** evaluation of the chest wall lesions revealed extensive eosinophilic epidermal necrosis and separation of the epidermis from the *** capecitabine plus lapatinib treatment was discontinued immediately and treatment was started using systemic *** treatment resolved most lesions,although the lesions on her palms and soles required Vaseline gauze dressings,which resulted in ***,we determined that the patient had concurrent SJS and *** the dermatological problems resolved,the patient ultimately died because of multiple organ *** Oral capecitabine treatment carries a risk of both HFS and also life-threatening adverse cutaneous drug reactions,such as SJS.

关键词： Stevens-Johnson syndrome Hand-Foot syndrome Palliative treatment Capecitabine Breast neoplasms Case report

Electrochemical partial reduction of Ni(OH)_(2) to Ni(OH)_(2)/Ni via coupled oxidation of an interfacing NiAl intermetallic compound for robust hydrogen evolution

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2023年第7期82卷 560-571,I0012页

作者： Young Hwa yun Kwangsoo Kim Changsoo Lee Byeong-Seon An Ji Hee Kwon Sechan Lee MinJoong Kim Jongsu Seo Jong Hyeok Park Byung-hyun Kim hyun-seok Cho Hydrogen Research Department Korea Institute of Energy Research152 Gajeong-roYuseong-guDaejeon 34129Republic of Korea Computational Science&Engineering Laboratory Korea Institute of Energy Research152 Gajeong-roYuseong-guDaejeon 34129Republic of Korea Analysis Center for Energy Research Korea Institute of Energy Research152 Gajeong-roYuseong-guDaejeon 34129Republic of Korea Department of Chemical and Biomolecular Engineering Yonsei University50 Yonsei-roSeodaemun-guSeoul 03722Republic of Korea

Ni-based porous electrocatalysts have been widely used in the hydrogen evolution reaction(HER)in alkaline water electrolysis,and the catalysts are produced by selective leaching of Al from Ni-Al *** is well known that chemical leaching of Ni-Al intermetallic compound(IMC)generates a high surface area in Ni(OH)_(2).However,the Ni(OH)_(2) produced by leaching the Ni-Al intermetallic compound retards the hydrogen evolution reaction,which is attributed to its weak hydrogen adsorption *** this study,we controlled the chemical state of Ni using plasma vapor deposition(PVD)followed by heat treatment,selective Al leaching,and electrochemical reduction.X-ray diffraction(XRD),scanning microscopy(SEM),transmission electron microscopy(TEM),and energy-dispersive X-ray spectroscopy(EDS)were used to confirm the phase evolution of the electrocatalysts during *** reveal that the heat-treated Ni-Al alloy with a thick Ni2Al3surface layer underwent selective Al leaching and produced biphasic interfaces comprising Ni(OH)_(2) and NiAl IMCs at the edges of the grains in the outermost surface *** oxidation of the interfacing NiAl IMCs facilitated the partial reduction of Ni(OH)_(2) to Ni(OH)_(2)/Ni in the grains during electrochemical reduction,as confirmed by X-ray photoelectron spectroscopy(XPS).An electrocatalyst containing partially reduced Ni(OH)_(2)/Ni exhibited an overpotential of 54 mV at 10 mA/cm^(2) in a half-cell measurement,and a cell voltage of 1.675 V at 0.4 A/cm2for single-cell operation.A combined experimental and theoretical study(density functional theory calculations)revealed that the superior HER activity was attributed to the presence of partially reduced metallic Ni with various defects and residual Al,which facilitated water adsorption,dissociation,and finally hydrogen evolution.

关键词： Raney nickel HERChemical leaching Intrinsic activity Partial reduction

Usefulness of colonic tattooing using indocyanine green in patients with colorectal tumors

在线全文

学校读者我要写书评

暂无评论

World Journal of Clinical Cases 2018年第13期6卷 632-640页

作者： Jae Ho Park Hee seok Moon In Sun Kwon Gee Young yun Seo Hee Lee Dae Hwa Park Ju seok Kim Sun hyung Kang Eaum seok Lee seok hyun Kim Jae Kyu Sung Byung seok Lee hyun Yong Jeong Division of Gastroenterology Department of Internal Medicine Chungnam National University Hospital Chungnam National University college of Medicine Clinical Trials Center Chungnam National University Hospital

AIM To prove that tattooing using indocyanine green(ICG) is feasible in laparoscopic surgery for a colon *** From January 2012 to December 2016, all patients who underwent laparoscopic colonic surgery were retrospectively screened, and 1010 patients with colorectal neoplasms were included. Their lesions were tattooed with ICG the day before the operation. The tattooed group(TG) included 114 patients, and the non-tattooed group(NTG) was selected by propensity score matching of subjects based on age, sex, tumor staging, and operation method(n = 228). In total, 342 patients were enrolled. Between the groups, the changes in [Delta(Δ), preoperative-postoperative] the hemoglobin and albumin levels, operation time, hospital stay, oral ingestion period, transfusion, and perioperative complications were compared. RESULTS Preoperative TG had a shorter operation time(174.76 ± 51.6 min vs 192.63 ± 59.9 min, P < 0.01), hospital stay(9.55 ± 3.36 d vs 11.42 ± 8.23 d, P < 0.01), and postoperative oral ingestion period(1.58 ± 0.96 d vs 2.81 ± 1.90 d, P < 0.01). The Δ hemoglobin(0.78 ± 0.76 g/dL vs 2.2 ± 1.18 g/dL, P < 0.01) and Δ albumin(0.41 ± 0.44 g/dL vs 1.08 ± 0.39 g/dL, P < 0.01) levels were lower in the TG. On comparison of patients in the "N0" and "N1 or N2" groups, the N0 colon cancer group had a better operation time, length of hospital stay, oral ingestion period, Δ hemoglobin, and Δ albumin results than those of the N1 or N2 group. The operation methods affected the results, and laparoscopic anterior resection(LAR) showed similar results. However, for left and right hemicolectomy, both groups showed no difference in operation time or hospital *** Preoperative tattooing with ICG is useful for laparoscopic colectomy, especially in the N0 colon cancer group and LAR.

关键词： Colorectal neoplasm Laparoscopic surgery Endoscopic tattoo Indocyanine green Perioperative

Die sinter bonding in air using copper formate preform for formation of full-density bondline

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Transactions of Nonferrous Metals Society of China 2021年第6期31卷 1717-1728页

作者： yun-Ju LEE Jong-hyun LEE Department of Materials Science and Engineering Seoul National University of Science and Technology232 Gongneung-roNowon-guSeoul 139-743Korea

Pressure-assisted sinter bonding was performed in air at 250−350℃ using a preform comprising copper formate particles to form a bondline that is sustainable at high temperatures.H2 and CO generated concurrently by the pyrolysis of copper formate at 210℃ during the sinter bonding removed the native oxide and other oxides grown on bulk Cu finishes,enabling interface ***,Cu produced in situ by the reduction of Cu(II)accelerated the sinter ***,the bonding achieved at 300−350℃ under 5 MPa exhibited sufficient shear strength of 20.0−31.5 MPa after 180−300 min of sinter *** addition,an increase in pressure to 10 MPa resulted in shear strength of 21.9 MPa after an extremely short time of 30 s at 250℃,and a near-full-density bondline was achieved after 300 *** obtained results indicate the promising potential of the preform comprising copper formate particles for high-speed sinter bonding.

关键词： structural materials microstructure mechanical properties copper formate preform sinter bonding pyrolysis

Prediction of Melt Pool Dimension and Residual Stress Evolution with Thermodynamically-Consistent Phase Field and Consolidation Models during Re-Melting Process of SLM

在线全文

学校读者我要写书评

暂无评论

Computers, Materials & Continua 2021年第1期66卷 87-112页

作者： Kang-hyun Lee Gun Jin yun Department of Aerospace Engineering Seoul National UniversitySeoul08826South Korea Institute of Advanced Aerospace Technology Seoul National UniversitySeoul08826South Korea

Re-melting process has been utilized to mitigate the residual stress level in the selective laser melting(SLM)process in recent ***,the complex consolidation mechanism of powder and the different material behavior after the first laser melting hinder the direct implementation of the re-melting *** this work,the effects of re-melting on the temperature and residual stress evolution in the SLM process are investigated using a thermo-mechanically coupled finite element *** degree of consolidation is incorporated in the energy balance equation based on the thermodynamically-consistent phase-field *** drastic change of material properties due to the variation of temperature and material state is also *** the proposed simulation framework,the single-track scanning is simulated first to predict the melt pool dimension and validate the proposed model with the existing experimental *** obtained thermal histories reveal that the highest cooling rate is observed at the end of the local solidification time which acts as an important indicator for the alleviation of temperature ***,the scanning of a whole single layer that consists of multiple tracks is simulated to observe the stress evolution with several re-melting *** the full melting of powder material in the first scanning process,the increase of residual stress level is observed with one remelting ***,the predicted stress level with the re-melting process shows the variation trend attributable to the accumulated heat in the *** numerical issues and the detailed implementation process are also introduced in this paper.

关键词： Selective laser melting thermo-mechanical analysis Ti-6Al-4V additive manufacturing re-melting residual stress

MOF‑Derived CoSe2@N‑Doped Carbon Matrix Confined in Hollow Mesoporous Carbon Nanospheres as High‑Performance Anodes for Potassium‑Ion Batteries

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro Letters 2021年第1期13卷 123-137页

作者： Su hyun Yang Seung‑Keun Park yun Chan Kang Department of Materials Science and Engineering Korea UniversityAnam‑DongSeongbuk‑GuSeoul 136‑713Republic of Korea Department of Chemical Engineering Kongju National University1223‑24 Cheonan‑daeroSeobuk‑guCheonan 31080Republic of Korea

In this work,a novel vacuum-assisted strategy is proposed to homogenously form Metal-organic frameworks within hollow mesoporous carbon nanospheres(HMCSs)via a solid-state *** method is applied to synthesize an ultrafine CoSe2 nanocrystal@N-doped carbon matrix confined within HMCSs(denoted as CoSe2@NC/HMCS)for use as advanced anodes in highperformance potassium-ion batteries(KIBs).The approach involves a solvent-free thermal treatment to form a Co-based zeolitic imidazolate framework(ZIF-67)within the HMCS templates under vacuum conditions and the subsequent *** treatment under vacuum facilitates the infiltration of the cobalt precursor and organic linker into the HMCS and simultaneously transforms them into stable ZIF-67 particles without any *** the subsequent selenization process,the“dual confinement system”,composed of both the N-doped carbon matrix derived from the organic linker and the small-sized pores of HMCS,can effectively suppress the overgrowth of CoSe2 ***,the resulting uniquely structured composite exhibits a stable cycling performance(442 mAh g^−1 at 0.1 A g^−1 after 120 cycles)and excellent rate capability(263 mAh g^−1 at 2.0 A g^−1)as the anode material for KIBs.

关键词： Metal-organic frameworks Hollow mesoporous carbon nanospheres Potassium-ion batteries Cobalt selenides Electrode materials

Risk factors for metachronous gastric carcinoma development after endoscopic resection of gastric dysplasia: Retrospective, single-center study

在线全文

学校读者我要写书评

暂无评论

World Journal of Gastroenterology 2017年第24期23卷 4407-4415页

作者： Hee seok Moon Gee Young yun Ju seok Kim Hyuk Soo Eun Sun hyung Kang Jae Kyu Sung hyun Yong Jeong Kyu-Sang Song Department of Internal Medicine Chungnam National University Hospital Chungnam National University School of Medicine Department of Pathology Chungnam National University Hospital Chungnam National University School of Medicine

To determine the gastric adenocarcinoma (GAC) occurrence rate and related factors, we evaluated the follow-up results of patients confirmed to have gastric dysplasia after endoscopic resection (ER). METHODSWe retrospectively analyzed the medical records, endoscopic examination records, endoscopic procedure records, and histological records of 667 cases from 641 patients who were followed-up for at least 12 mo, from among 1273 patients who were conformed to have gastric dysplasia after Endoscopic mucosal resection (EMR) or endoscopic submucosal dissection (ESD) of gastric mucosal lesions between January 2007 and August 2013 at the Chungnam National University Hospital. RESULTSThe mean follow-up period was 33.8 mo, and the median follow-up period was 29 mo (range: 12-87). During the follow-up period, the occurrence of metachronous GAC was 4.0% (27/667). The mean and median interval periods between the occurrence of metachronous GAC and endoscopic treatment of gastric dysplasia were 36.3 and 34 mo, respectively (range: 16-71). The factors related to metachronous GAC occurrence after ER for gastric dysplasia were male sex (5.3% vs 1.0%), open-type atrophic gastritis (9.5% vs 3.4%), intestinal metaplasia (6.8% vs 2.4%), and high-grade dysplasia (HGD; 8.4% vs 3.2%). Among them, male sex [OR: 5.05 (1.18-21.68), P = 0.029], intestinal metaplasia [OR: 2.78 (1.24-6.23), P = 0.013], and HGD [OR: 2.70 (1.16-6.26), P = 0.021] were independent related factors in multivariate analysis. Furthermore, 24 of 27 GAC cases (88.9%) occurred at sites other than the previous resection sites, and 3 (11.1%) occurred at the same site as the previous resection site. CONCLUSIONMale sex, intestinal metaplasia, and HGD were significantly related to the occurrence of metachronous GAC after ER of gastric dysplasia, and most GACs occurred at sites other than the previous resection sites.

关键词： Gastric dysplasia Neoplasms Second primary Endoscopic mucosal resection Stomach neoplasms

Carbon-Coated Three-Dimensional MXene/Iron Selenide Ball with Core–Shell Structure for High-Performance Potassium-Ion Batteries

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro Letters 2022年第1期14卷 278-294页

作者： Su hyun Yang yun Jae Lee Heemin Kang Seung-Keun Park yun Chan Kang Department of Materials Science and Engineering Korea UniversityAnam-DongSeongbuk-GuSeoul 136-713Republic of Korea Department of Advanced Materials Engineering Chung-Ang University4726 Seodong-daeroDaedeok-myeonAnseong-siGyeonggi-do 17546Republic of Korea

Two-dimensional(2D)MXenes are promising as electrode materials for energy storage,owing to their high electronic conductivity and low diffusion ***,similar to most 2D materials,MXene nanosheets easily restack during the electrode preparation,which degrades the electrochemical performance of MXene-based materials.A novel synthetic strategy is proposed for converting MXene into restacking-inhibited three-dimensional(3D)balls coated with iron selenides and *** strategy involves the preparation of Fe_(2)O_(3)@carbon/MXene microspheres via a facile ultrasonic spray pyrolysis and subsequent selenization *** 3D structuring effectively prevents interlayer restacking,increases the surface area,and accelerates ion transport,while maintaining the attractive properties of ***,combining iron selenides and carbon with 3D MXene balls offers many more sites for ion storage and enhances the structural robustness of the composite *** resultant 3D structured microspheres exhibit a high reversible capacity of 410 mAh g^(−1) after 200 cycles at 0.1 A g^(−1) in potassium-ion batteries,corresponding to the capacity retention of 97% as calculated based on 100 *** at a high current density of 5.0 A g^(−1),the composite exhibits a discharge capacity of 169 mAh g^(−1).

关键词： MXene Spray pyrolysis Iron selenide Potassium-ion batteries 3D structures