检索结果-南通市图书馆

Hepatobiliary Surgery and Nutrition 2024年第3期13卷 520-522页

作者： Deok-Bog Moon Gil-Chun Park sang hoon kim Sung-Min kim Division of Hepatobiliary Surgery and Liver Transplantation Department of SurgeryAsan Medical CenterUniversity of Ulsan College of MedicineSeoulKorea

In living donor liver transplantation(LDLT),early bifurcation of hepatic artery(HA)relative to the cutting line of bile duct(BD)requires additional skeletonization of the hilar plate,especially around BD,compared to opposite ***,it may preclude higher chances of biliary complications such as bile leak and biliary stenosis in the ***,donor surgeons should be well aware of the anatomical correlations among HA,BD,and portal vein(PV),based on preoperative 3-dimensional(3D)images,and also intraoperatively perform meticulous dissection of HA from the surrounding tissues and minimize the damage of microcirculation to the BD without using energy devices such as electrocautery(1).When extensive dissection around BD&its ischemic damage in the donor is expected to obtain single HA opening of the harvesting graft,we prefer separate two HA openings including right anterior and posterior HAs to single right HA(RHA)opening without skeletonization of donor’s BD.

关键词： Living donor liver transplantation(LDLT) hepatic artery(HA) early bifurcation right-sided living-donor

Functionally graded structure of a nitride-strengthened Mg_(2)Si-based hybrid composite

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第3期12卷 1239-1256页

作者： Jeongho Yang Woongbeom Heogh Hogi Ju Sukhyun Kang Tae-Sik Jang Hyun-Do Jung Mohammad Jahazi Seung Chul Han Seong Je Park Hyoung Seop kim Susmita Bose Amit Bandyopadhyay Martin Byung-Guk Jun Young Won kim Dae-kyeom kim Rigoberto CAdvincula Clodualdo Aranas Jr sang hoon kim School of Mechanical Engineering Pusan National UniversityBusan 46241Republic of Korea Department of Mechanical Design Engineering Hanyang UniversitySeoul 04763Republic of Korea Process Research 3 Team LG Display Co.Ltd.PajuGyeonggi-do 10845Republic of Korea Department of Materials Science and Engineering Chosun UniversityGwangju 61452Republic of Korea Institute of Well-Aging Medicare&Chosun University LAMP Center Chosun UniversityGwangju 61452Republic of Korea Division of Materials Science and Engineering Hanyang UniversitySeoul 04763Republic of Korea Department of Mechanical Engineering École de Technologie SupérieureMontrealQuebec H3C 1K3Canada Material&Component Convergence R&D Center Korea Construction Equipment Technology InstituteGunsanJeollabuk-do 54002Republic of Korea School of Mechanical and Aerospace Engineering Nanyang Technological UniversitySingapore 639798Singapore Graduate Institute of Ferrous&Eco Materials Technology Pohang University of Science and TechnologyPohangGyeongsangbuk-do 37673Republic of Korea Advanced Institute for Materials Research Tohoku UniversitySendai 980-8577Japan Institute for Convergence Research and Education in Advanced Technology Yonsei UniversitySeoul 03722Republic of Korea School of Mechanical and Materials Engineering Washington State UniversityPullmanWashington 99164USA School of Mechanical Engineering Purdue UniversityWest LafayetteIndiana 47907USA Research Institute of Advanced Manufacturing Technology Korea Institute of Industrial TechnologyIncheon 21999Republic of Korea Department of Macromolecular Science and Engineering Case Western Reserve UniversityClevelandOhio 44106USA Department of Chemical and Biomolecular Engineering and Joint Institute for Advanced Materials University of TennesseeKnoxvilleTennessee 37996USA Center for Nanophase Materials and Sciences Oak Ridge National LaboratoryOak RidgeTennessee 37830USA Department of Mechanical Engineering University of New BrunswickFrederictonNew Brunswick E3B 5A3Cana

The ex-situ incorporation of the secondary SiC reinforcement,along with the in-situ incorporation of the tertiary and quaternary Mg_(3)N_(2) and Si_(3)N_(4) phases,in the primary matrix of Mg_(2)Si is employed in order to provide ultimate wear resistance based on the laser-irradiation-induced inclusion of N_(2) gas during laser powder bed *** is substantialized based on both the thermal diffusion-and chemical reactionbased metallurgy of the Mg_(2)Si–SiC/nitride hybrid *** study also proposes a functional platform for systematically modulating a functionally graded structure and modeling build-direction-dependent architectonics during additive *** strategy enables the development of a compositional gradient from the center to the edge of each melt pool of the Mg_(2)Si–SiC/nitride hybrid ***,the coefficient of friction of the hybrid composite exhibits a 309.3%decrease to–1.67 compared to–0.54 for the conventional nonreinforced Mg_(2)Si structure,while the tensile strength exhibits a 171.3%increase to 831.5 MPa compared to 485.3 MPa for the conventional *** outstanding mechanical behavior is due to the(1)the complementary and synergistic reinforcement effects of the SiC and nitride compounds,each of which possesses an intrinsically high hardness,and(2)the strong adhesion of these compounds to the Mg_(2)Si matrix despite their small sizes and low concentrations.

关键词： Laser powder bed fusion Mg_(2)Si-SiC/nitride hybrid composite Both the thermal diffusion-and chemical reaction-based metallurgy Functionally graded structure Compositional gradient Wear resistance.

Microstructural characteristics of AZ31 alloys rolled at room and cryogenic temperatures and their variation during annealing

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2020年第2期8卷 537-545页

作者： sang Won Lee sang-hoon kim Sung Hyuk Park School of Materials Science and Engineering Kyungpook National UniversityDaegu 41566Republic of Korea

This study investigates the microstructural characteristics of AZ31 Mg alloys rolled at room temperature(RT)and cryogenic temperature(CT)and the variation in their microstructure and hardness during subsequent *** induces the formation of more side cracks than does RT rolling,because of the reduction in the ability of the material to accommodate deformation at ***{10-11}contraction and{10-11}-{10-12}double twins are formed in both the material rolled at RT and that rolled at CT,because the grains of the initial material are favorably oriented for{10-11}twinning under *** RT-rolled material has a higher dislocation density than the cryorolled material,and more twins are uniformly distributed throughout the former *** a result,static recrystallization during subsequent annealing is more pronounced in the RT-rolled material,which results in the formation of a highly recrystallized homogeneous microstructure after *** contrast,the formed twins are predominantly present along the shear bands in the cryorolled material,as a result of which this material has an inhomogeneous bi modal structure containing a large amount of coarse unrecrystallized grains after *** hardness of the annealed RT-rolled material is higher than that of the annealed cryorolled material owing to the finer grain structure of the former.

关键词： Magnesium Rolling Cryogenic temperature Annealing Microstructure

Variation in dynamic deformation behavior and resultant yield asymmetry of AZ80 alloy with extrusion temperature

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2020年第11期42卷 225-236页

作者： sang-hoon kim sang Won Lee Byoung Gi Moon Ha Sik kim Sung Hyuk Park School of Materials Science and Engineering Kyungpook National UniversityDaegu702701South Korea Implementation Research Division Korea Institute of Materials ScienceChangwon51508South Korea

In this work,variation in the dynamic recrystallization(DRX)and dynamic precipitation behavior of AZ80 alloy during extrusion due to changes in extrusion temperature was investigated,and the resultant microstructure and yield asymmetry were *** the extrusion temperature increases from 250℃to 350℃,the primary DRX mechanism changes from twin-induced DRX to discontinuous DRX,resulting in an increase in the DRX area fraction and un DRXed grain *** addition,as the extrusion temperature rises,Mg17Al12 precipitation during extrusion decreases sharply throughout the extruded *** reduction in the compressive yield strength(CYS)with increasing extrusion temperature is more pronounced than it is for the tensile yield strength(TYS),which ultimately increases the yield asymmetry of the extruded *** higher extrusion temperature has less of an influence on the TYS due to the promotion of certain hardening *** the other hand,the greater reduction in the CYS is attributed to the increased fraction and size of regions in which{1012}twins predominantly form and the lower amount of precipitates,which effectively facilitates{1012}twinning.

关键词： Magnesium alloys Extrusion Recrystallization Precipitation Yield asymmetry

Extrusion limit diagram of AZ91–0.9Ca–0.6Y–0.5MM alloy and effects of extrusion parameters on its microstructure and mechanical properties

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2022年第12期10卷 3447-3458页

作者： Dong HeeLee Ye Jin kim sang-hoon kim Byoung Gi Moon Sung Hyuk Park School of Materials Science and Engineering Kyungpook National UniversityDaegu 41566Republic of Korea Agency for Defense Development Daejeon 34186Republic of Korea Advanced Metals Division Korea Institute of Materials ScienceChangwon 51508Republic of Korea

An AZ91–0.9Ca–0.6Y–0.5MM(AZXWMM91100) alloy, which has higher corrosion resistance, ignition resistance, and extrudability than a commercial AZ91 alloy, has been developed recently. In this study, the AZXWMM91100 alloy is extruded at various temperatures(300–400 ℃) and ram speeds(1–14.5 mm/s), and the cracking behaviors, microstructure, and tensile properties of the extruded materials are systematically analyzed. On the basis of the pressure limit and surface and internal cracking limit, the extrusion limit diagram providing a safe extrusion processing zone is established. All of the materials extruded at temperatures and speeds within the safe extrusion processing zone have high surface quality and moderate tensile ductility with an elongation higher than 10%. Moreover, they have a fully recrystallized grain structure and contain undissolved particle stringers arranged parallel to the extrusion direction. The grain size of the extruded material does not show any relationship with the Zener–Hollomon parameter(Z). However, the yield strength(YS) of the extruded material is inversely proportional to the logarithm of the Z value, and their relationship is expressed as YS =-31.2·log(Z) + 536. These findings may broaden the understanding of the AZXWMM91100 alloy with excellent chemical and physical properties and provide valuable information for the development of high-performance extruded Mg products using this alloy.

关键词： Magnesium Extrudability Extrusion limit diagram Microstructure Tensile properties

Variations in microstructure and bending formability of extruded Mg–Al–Zn–Ca–Y–MM alloy with precompression and subsequent annealing treatment conditions

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2022年第9期10卷 2475-2490页

作者： Jong Un Lee sang-hoon kim Dong Hee Lee Hyun Ji kim Young Min kim Sung Hyuk Park School of Materials Science and Engineering Kyungpook National UniversityDaegu 41566Republic of Korea Agency for Defense Development Daejeon 34186Republic of Korea Implementation Research Division Korea Institute of Materials ScienceChangwon 51508Republic of Korea

In this study, the bending formability of an extruded Mg–9Al–1Zn–0.3Mn–0.9Ca–0.6Y–0.5 MM(AZXWMM91100, wt%) alloy at room temperature is significantly improved through application of a combined precompression and subsequent annealing(PCA) treatment. As the amount of precompression applied along the extrusion direction(ED)(i.e., the total strain) increases from 4% to 6%, the area fraction of ED-oriented grains of the PCA-treated alloy increases, which consequently causes an improvement in its bending formability because these grains accommodate larger tensile strain along the ED during bending. As the temperature of the subsequent annealing treatment increases from 350 ℃ to 450 ℃, both the area fraction of the ED-oriented grains and the average grain size increase, and the residual dislocation density decreases owing to the promotion of boundary migration and occurrence of the recovery process at higher ***, the bending formability of both the 4%-precompressed and the 6%-precompressed samples increases with an increase in the annealing temperature. However, when the precompressed samples are annealed at 300 ℃, their bending formability is lower than that of the extruded alloy because the dislocations formed by precompression remain even after the subsequent annealing at this temperature.

关键词： Magnesium Extrusion Bending Formability Texture

Dynamic deformation behavior and microstructural evolution during high-speed rolling of Mg alloy having non-basal texture

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2019年第4期35卷 473-482页

作者： sang-hoon kim Jeong Hun Lee Chong Soo Lee Jonghun Yoon Sung Hyuk Park School of Materials Science and Engineering Kyungpook National University Ulsan Regional Division Korea Institute of Industrial Technology Graduate Institute of Ferrous Technology Pohang University of Science and Technology Department of Mechanical Engineering Hanyang University

The dynamic deformation behaviors and resultant microstructural variations during high-speed rolling(HSR) of a Mg alloy with a non-basal texture are investigated. To this end, AZ31 alloy samples in which the basal poles of most grains are predominantly aligned parallel to the transverse direction(TD) are subjected to hot rolling with different reductions at a rolling speed of 470 m/min. The initial grains with a TD texture are favorable for {10–12} twinning under compression along the normal direction(ND); as a result, {10–12} twins are extensively formed in the material during HSR, and this consequently results in a drastic evolution of texture from the TD texture to the ND texture and a reduction in the grain size. After the initial grains are completely twinned by the {10–12} twinning mechanism, {10–11} contraction twins and {10–11}-{10–12} double twins are formed in the {10–12} twinned grains by further *** the contraction twins and double twins have crystallographic orientations that are favorable for basal slip during HSR, dislocations easily accumulate in these twins and fine recrystallized grains nucleate in the twins to reduce the increased internal strain energy. Until a rolling reduction of 20%, {10–12}twinning is the main mechanism governing the microstructural change during HSR, and subsequently,the microstructural evolution is dominated by the formation of contraction twins and double twins and the dynamic recrystallization in these twins. With an increase in the rolling reduction, the average grain size and internal strain energy of the high-speed-rolled(HSRed) samples decrease and the basal texture evolves from the TD texture to the ND texture more effectively. As a result, the 80% HSRed sample, which is subjected to a large strain at a high strain rate in a single rolling pass, exhibits a fully recrystallized microstructure consisting of equiaxed fine grains and has an ND basal texture without a TD texture component.

关键词： Magnesium alloy High-speed rolling Texture Dynamic recrystallization Twinning

Accelerated precipitation behavior of cast Mg-Al-Zn alloy by grain refinement

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2018年第2期34卷 265-276页

作者： sang-hoon kim Jong Un Lee Ye Jin kim Jun Ho Bae Bong Sun You Sung Hyuk Park School of Materials Science and Engineering Kyungpook National University Implementation Research Division Korea Institute of Materials Science

This study demonstrates that the precipitation behavior of 13-Mg17Al12 phase during aging and the resultant variation in hardness and mechanical properties of cast Mg-Al-Zn alloy are strongly dependent on initial grain size. Grain size reduction accelerates discontinuous precipitation at the early stage of aging treatment by increasing the area fraction of grain boundaries that can act as nucleation sites for discontinuous precipitates （DP）, but it does not influence DP growth rate. Grain refinement also prematurely terminates continuous precipitation because the formation of a large number of DP reduces the amount of AI dissolved in the matrix, which is required for the formation of continuous precipitates （CP）. This promotion of DP formation and early termination of CP formation significantly decrease the peak-aging time to one-third. The enhanced precipitation behavior also leads to an additional hardness improvement in the aged alloy, along with an increase in hardness owing to grain boundary strengthening by grain refinement. The amount of increase in hardness changes with aging time, which is determined by the variation of three variables with aging time： DP fraction difference between refined and nonrefined alloys, hardness difference between DP and matrix, and matrix hardness difference between the two alloys. Grain refinement improves both tensile strength and ductility of the homogenized alloy owing to grain boundary strengthening and suppression of twinning activation, respectively. However, the loss of ductility after peak-aging treatment is greater in the refined alloy because of the larger amount of DP acting as a crack source in this alloy.

关键词： Magnesium Grain refinement Aging Precipitation Tensile properties

Texture tailoring and bendability improvement of rolled AZ31 alloy using {10-12} twinning: The effect of precompression levels

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2019年第4期7卷 648-660页

作者： Jong Un Lee Ye Jin kim sang-hoon kim Jeong Hun Lee Min-Seong kim Shi-hoon Choi Byoung Gi Moon Young Min kim Sung Hyuk Park School of Materials Science and Engineering Kyungpook National UniversityDaegu 41566Republic of Korea Ulsan Regional Division Korea Institute of Industrial TechnologyUlsan 44413Republic of Korea Department of Printed Electronics Engineering Sunchon National UniversitySuncheonJeonnam 57922Republic of Korea Implementation Research Division Korea Institute of Materials ScienceChangwon 51508Republic of Korea

In this study,the texture of a rolled Mg alloy is effectively modified through the application of precompression and subsequent annealing treatment,leading to a remarkable improvement in the bending formability of the alloy at room *** induces lattice reorientation through{10-12}twinning,and annealing treatment reduces the stored strain energy of the precompressed material,which results in the formation of a stable grain structure with two dominant texture *** an increase in precompression,the tensile strain in the outer region of the bending samples is accommodated to a greater extent due to more pronounced{10-12}twinning and basal *** a result,the bending formability of the material at room temperature improves with greater *** variation in microstructure,texture,and bending behavior in relation to the degree of precompression is discussed in detail.

关键词： Magnesium Bending Formability Twinning Texture

Dynamic recrystallization behavior and microstructural evolution of Mg alloy AZ31 through high-speed rolling

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2018年第10期34卷 1747-1755页

作者： Jeong Hun Lee Jong Un Lee sang-hoon kim Seok Weon Song Chong Soo Lee Sung Hyuk Park Ulsan Regional Division Korea Institute of Industrial Technology School of Materials Science and Engineering Kyungpook National University Technical Research Laboratories POSCO Graduate Institute of Ferrous Technology Pohang University of Science and Technology

High-speed rolling （HSR） is known to improve the workability of Mg alloys significantly, which makes it possible to impose a large reduction in a single pass without fracture. In the present study, dynamic recrystallization （DRX） behavior and microstructural and textural variations of Mg alloy AZ31 dur-ing a HSR process were investigated by conducting rolling with different imposed reductions in the range of 20%-80% at a high rolling speed of 470 m/min and 400℃. High-strain-rate deformation during HSR suppresses dislocation slips but promotes twinning, which results in the formation of numer-ous twins of several types, i.e., {10-12} extension twins, {10-11} and {10-13} contraction twins, and {10-11}-{10-12} double twins. After twinning, high strain energy is accumulated in twin bands because their crystallographic orientations are favorable for basal slips, leading to subsequent DRX at the twin bands. Accordingly, twinning activation and twinning-induced DRX behavior play crucial roles in accommodating plastic deformation during HSR and in varying microstructure and texture of the high- speed-rolled （HSRed） sheets. Area fraction of fine DRXed grains formed at the twin bands increases with increasing rolling reduction, which is attributed to the combined effects of increased strain, strain rate, and deformation temperature and a decreased critical strain for DRX. Size, internal strain, and texture intensity of the DRXed grains are smaller than those of unDRXed grains. Therefore, as rolling reduction increases, average grain size, stored internal energy, microstructural inhomogeneity, and basal texture intensity of the HSRed sheets gradually decrease owing to an increase in the area fraction of the DRXed grains.

关键词： Magnesium alloy High-speed rolling Twinning Dynamic recrystallization Microstructure