检索结果-南通市图书馆

Chemical and mechanical properties of stainless, environment-friendly, and nonflammable Mg alloys (SEN alloys): A review

引用

Journal of Magnesium and Alloys 2024年第3期12卷 841-872页

作者： Jong Un Lee Hyun Ji Kim sang-Cheol Jin Ye Jin Kim Young Min Kim Bong Sun You Jun Ho Bae Sung hyuk park Advanced Metals Division Korea Institute of Materials ScienceChangwon 51508Republic of Korea Department of Materials Science and Metallurgical Engineering Kyungpook National UniversityDaegu 41566Republic of Korea Missile Research Institute Agency for Defense DevelopmentDaejeon 34060Republic of Korea

This review article provides overall understanding of stainless,environment-friendly,and nonflammable Mg alloys(SEN alloys)recently developed at the Korea Institute of Materials *** alloys are produced by adding small amounts of Ca and Y(each<1 wt%)into commercial Mg–Al based alloys,resulting in exceptional ignition and corrosion resistances and impressive mechanical *** main advantages of SEN alloys are as follows.(1)A dense multi-oxide layer of SEN alloys comprising MgO,CaO,and Y_(2)O_(3) impedes the outward dispersion of Mg vapor and the inward penetration of O_(2) during oxidation,thereby enhancing the oxidation and ignition resistances.(2)The presence of Ca-and Y-based second-phase particles in SEN alloys can enhance their corrosion resistance because Ca-containing particles prevent the spread of corrosion,and the replacement of Al-containing particles with less noble ones containing Y(e.g.,Al–Mn–Y or Al–Y particles)retards corrosion.(3)The addition of minor amounts of Ca and Y renders excellent mechanical properties due to improved strengthening *** enhanced properties are attributed to more pronounced dynamic recrystallization and grain refining behaviors caused by the second-phase particles during extrusion.(4)Despite the presence of various types of second-phase particles,the fatigue properties of SEN9 alloys are similar to those of commercial AZ91 alloys.(5)Simultaneous introduction of Ca and Y suppresses the formation of Mg17Al12 discontinuous precipitates during aging,leading to the enhanced elongation of aged SEN alloys.(6)Adding mischmetal into the SEN9 alloy leads to a six-fold enhancement in ***,the studies conducted on SEN alloys demonstrate their excellent ignition and corrosion resistances and mechanical properties,which broaden the industrial applications of Mg alloys by addressing their inherent weaknesses.

关键词： SEN magnesium alloy Corrosion resistance Ignition resistance Mechanical properties Extrudability.

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A review of understanding electrocatalytic reactions in energy conversion and energy storage systems via scanning electrochemical microscopy

引用

Journal of Energy Chemistry 2024年第4期91卷 155-177页

作者： Jihye park Jong Hwan Lim Jin-hyuk Kang Jiheon Lim Ho Won Jang Hosun Shin Sun Hwa park Interdisciplinary Materials Measurement Institute Korea Research Institute of Standards and ScienceDaejeon 34113Republic of Korea Department of Material Science and Engineering Seoul National UniversitySeoul 08826Republic of Korea Department of Applied Measurement Science University of Science and TechnologyDaejeon 34113Republic of Korea

To address climate change and promote environmental sustainability,electrochemical energy conversion and storage systems emerge as promising alternative to fossil fuels,catering to the escalating demand for *** optimal energy efficiency and cost competitiveness in these systems requires the strategic design of electrocatalysts,coupled with a thorough comprehension of the underlying mechanisms and degradation behavior occurring during the electrocatalysis *** electrochemical microscopy(SECM),an analytical technique for studying surface electrochemically,stands out as a powerful tool offering electrochemical *** possesses remarkable spatiotemporal resolution,enabling the visualization of the localized electrochemical activity and surface *** review compiles crucial research findings and recent breakthroughs in electrocatalytic processes utilizing the SECM methodology,specifically focusing on applications in electrolysis,fuel cells,and metal–oxygen batteries within the realm of energy conversion and storage *** with an overview of each energy system,the review introduces the fundamental principles of SECM,and aiming to provide new perspectives and broadening the scope of applied research by describing the major research categories within SECM.

关键词： Scanning electrochemical microscopy Electrocatalyst Electrocatalysis Water splitting Fuel cell Metal-oxygen battery

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Enhanced prediction of anisotropic deformation behavior using machine learning with data augmentation

引用

Journal of Magnesium and Alloys 2024年第1期12卷 186-196页

作者： Sujeong Byun Jinyeong Yu Seho Cheon Seong Ho Lee Sung hyuk park Taekyung Lee School of Mechanical Engineering Pusan National UniversityBusan 46241South Korea School of Materials Science and Engineering Kyungpook National UniversityDaegu 41566South Korea

Mg alloys possess an inherent plastic anisotropy owing to the selective activation of deformation mechanisms depending on the loading *** characteristic results in a diverse range of flow curves that vary with a deformation *** study proposes a novel approach for accurately predicting an anisotropic deformation behavior of wrought Mg alloys using machine learning(ML)with data *** developed model combines four key strategies from data science:learning the entire flow curves,generative adversarial networks(GAN),algorithm-driven hyperparameter tuning,and gated recurrent unit(GRU)*** proposed model,namely GAN-aided GRU,was extensively evaluated for various predictive scenarios,such as interpolation,extrapolation,and a limited dataset *** model exhibited significant predictability and improved generalizability for estimating the anisotropic compressive behavior of ZK60 Mg alloys under 11 annealing conditions and for three loading *** GAN-aided GRU results were superior to those of previous ML models and constitutive *** superior performance was attributed to hyperparameter optimization,GAN-based data augmentation,and the inherent predictivity of the GRU for *** a first attempt to employ ML techniques other than artificial neural networks,this study proposes a novel perspective on predicting the anisotropic deformation behaviors of wrought Mg alloys.

关键词： Plastic anisotropy Compression Annealing Machine learning Data augmentation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effect of characteristics and distribution of Mg_(17)Al_(12)precipitates on tensile and bending properties of high-Al-containing Mg alloys

引用

Journal of Magnesium and Alloys 2024年第2期12卷 779-793页

作者： Sumi Jo Gyo Myeong Lee Jong Un Lee Young Min Kim Sung hyuk park School of Materials Science and Engineering Kyungpook National UniversityDaegu 41566Republic of Korea Department of Magnesium Korea Institute of Materials ScienceChangwon 51508Republic of Korea

This study investigates the effect of characteristics and distribution of Mg_(17)Al_(12)precipitates on the uniaxial tensile and three-point bending properties of extruded Mg alloys containing high Al *** extruded Mg–9Al–1Zn–0.3Mn(AZ91)alloy contains lamellar-structured Mg_(17)Al_(12)discontinuous precipitates along the grain boundaries,which are formed via static precipitation during natural air *** extruded Mg–11Al–1Zn–0.3Mn(AZ111)alloy contains spherical Mg_(17)Al_(12)precipitates at the grain boundaries and inside the grains,which are formed via dynamic precipitation during *** to inhomogeneous distribution of precipitates,the AZ111 alloy consists of two different precipitate regions:precipitate-rich region with numerous precipitates and finer grains and precipitate-scarce region with a few precipitates and coarser *** AZ111 alloy exhibits a higher tensile strength than the AZ91 alloy because its smaller grain size and more abundant precipitates result in stronger grain-boundary hardening and precipitation hardening effects,***,the tensile elongation of the AZ111 alloy is lower than that of the AZ91 alloy because the weak cohesion between the dynamic precipitates and the matrix facilitates the crack initiation and *** bending,a macrocrack initiates on the outer surface of bending specimen in both *** AZ111 alloy exhibits higher bending yield strength and lower failure bending strain than the AZ91 *** bending specimens of the AZ91 alloy have similar bending formability,whereas those of the AZ111 alloy exhibit considerable differences in bending formability and crack propagation behavior,depending on the distribution and number density of precipitates in the *** bending specimens of the AZ111 alloy,it is found that the failure bending strain(ε_(f,bending))is inversely proportional to the area fraction of precipitates in the outer zone of bending specimen(A_(ppt)),with a relation

关键词： Mg–Al alloy Extrusion Bending Precipitation Microstructure

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

High Na-ion conductivity andmechanical integrity of anion-exchanged polymeric hydrogel electrolytes for flexible sodium ion hybrid energy storage

引用

SusMat 2024年第1期4卷 140-153页

作者： JungWoo Hong Harpalsinh H.Rana Jeong Hee park Jun Su Kim sang Joon Lee Gun Jang Tae Hoon Kang Kang Ho Shin sang Ha Baek Wooseok Yang Kwang Ho Kim Ju-hyuk Lee Ho Seok park School of Chemical Engineering Sungkyunkwan UniversitySuwonRepublic of Korea Clean Energy Research Center Korea Institute of Science and Technology(KIST)SeoulRepublic of Korea KIST-SKKU Carbon-Neutral Research Center Sungkyunkwan University(SKKU)SuwonRepublic of Korea SKKU Institute of Energy Science and Technology(SIEST) Sungkyunkwan UniversitySuwonRepublic of Korea COSMOS LAB/92 Jomaru-ro 385beon-gilBucheon-siRepublic of Korea SKKU Advanced Institute of Nano Technology(SAINT) Sungkyunkwan UniversitySuwonRepublic of Korea Department of Health Sciences and Technology Samsung Advanced Institute for Health Sciences and Technology(SAIHST)Sungkyunkwan UniversitySuwonRepublic of Korea

The polymeric gel electrolytes are attractive owing to their higher ionic conductivities than those of dry polymer electrolytes and lowered water activity for enlarged potential ***,the ionic conductivity and mechanical strength of the Na-ion conducting polymeric gel electrolytes are limited by below 20 mS cm−1 and 2.2 ***,we demonstrate Na-ion conducting and flexible polymeric hydrogel electrolytes of the chemically coupled poly(diallyldimethylammonium chloride)-dextrin-N,N′-methylene-bisacrylamide film immersed in NaClO_(4) solution(ex-DDA-Dex+NaClO_(4))for flexible sodium-ion hybrid capacitors(f-NIHC).In particular,the anion exchange reaction and synergistic interaction of ex-DDA-Dex with the optimum ClO_(4)−enable to greatly improve the ionic conductivity up to 27.63 mS cm−1 at 25◦C and electrochemical stability window up to 2.6 V,whereas the double networking structure leads to achieve both the mechanical strength(7.48 MPa)and softness of hydrogel ***,the f-NIHCs with the ex-DDA-Dex+NaClO_(4) achieved high specific and high-rate capacities of 192.04 F g^(−1)at 500 mA g^(−1)and 116.06 F g^(−1)at 10000 mA g^(−1),respectively,delivering a large energy density of 120.03Wh kg^(−1)at 906Wkg^(−1)and long cyclability of 70%over 500 cycles as well as demonstrating functional operation under mechanical stresses.

关键词： anion exchange chemistry flexible energy storage hybrid energy storage hydrogel electrolytes renewable electrolytes sodium storage

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

上颔第二磨牙伴有6个根管病例士艮告

引用

中国口腔医学继续教育杂志 2009年第3期12卷 12-15页

作者： Jong Ryul K m dmd,msd Sung Baik Choi, DDS, msd, phd sang hyuk park, dmd, msd, phd 李欣（译）董雯（审）不详首都医科大学口腔医学院预防科北京市崇文区天坛西里4号 100050

成功牙髓治疗的第一步是进入髓腔并找到所有的根管。为了达到这个目标．医师需要对患牙有足够地了解并熟悉根管的各种变化。此病例报告介绍了1例解剖变异的上颌第二磨牙伴有6个根管．这种情况以前未见报道，可为我们寻找不常见的根管提... 详细信息

成功牙髓治疗的第一步是进入髓腔并找到所有的根管。为了达到这个目标．医师需要对患牙有足够地了解并熟悉根管的各种变化。此病例报告介绍了1例解剖变异的上颌第二磨牙伴有6个根管．这种情况以前未见报道，可为我们寻找不常见的根管提供帮助。

关键词：上颌第二磨牙根管根管变异

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Prevalence and risk factors of wound complications after transtibial amputation in patients with diabetic foot

引用

World Journal of Diabetes 2024年第4期15卷 629-637页

作者： Young Uk park Seong hyuk Eim Young Wook Seo Department of Orthopedic Surgery Ajou University School of MedicineAjou University HospitalSuwon 16499South Korea

BACKGROUND Diabetic foot(DMF)complications are common and are increasing in *** factors related to wound complications are yet to be established after transtibial amputation under the diagnosis of DMF *** To analyze the prognosis and risk factors related to wound complications after transtibial amputation in patients with *** This retrospective cohort study included seventy-two patients with DMF complications who underwent transtibial amputation between April 2014 and March *** groups were categorized based on the occurrence of wound complications,and we compared demographic data between the complication group and the non-complication group to analyze risk ***,a multivariate logistic regression analysis was performed to identify risk *** The average follow-up period was 36.2 *** the 72 cases,31(43.1%)had wound *** these,12 cases(16.7%)received further treatment,such as debridement,soft tissue stump revision,and re-amputation at the proximal *** a group that required further management due to wound complications after transtibial amputation,the hemoglobin A1c(HbA1c)level was 9.32,while the other group that did not require any treatment had a 7.54 HbA1c *** prevalence of a history of kidney transplantation with wound complications after transtibial amputation surgery in DMF patients was significantly greater than in cases without wound complications(P=0.02).Other factors did not show significant *** Approximately 43.1%of the patients with transtibial amputation surgery experienced wound complications,and 16.7%required additional surgical *** HbA1c levels and kidney transplant history are risk factors for postoperative wound complications.

关键词： Diabetic foot Transtibial amputation Wound complications Risk factor

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Depolarization mitigated in ferroelectric Hf_(0.5)Zr_(0.5)O_(2)ultrathin films(<5 nm)on Si substrate by interface engineering

引用

Journal of Advanced Ceramics 2024年第3期13卷 282-292页

作者： Se Hyun Kim Younghwan Lee Dong Hyun Lee Geun Hyeong park Hyun Woo Jeong Kun Yang Yong Hyeon Cho Young Yong Kim Min hyuk park Department of Materials Science and Engineering College of EngineeringSeoul National UniversitySeoul 08826Republic of Korea Research Institute of Advanced Materials College of EngineeringSeoul National UniversitySeoul 08826Republic of Korea Inter-university Semiconductor Research Center College of EngineeringSeoul National UniversitySeoul 08826Republic of Korea Pohang Accelerator Laboratory Pohang University of Science&TechnologyPohang 790784Republic of Korea

(Hf,Zr)O_(2)offers considerable potential for next-generation semiconductor devices owing to its nonvolatile spontaneous polarization at the ***,scaling this material to sub-5 nm thickness poses several challenges,including the formation of an interfacial layer and high trap *** particular,a low-k SiO_(2)interfacial layer is naturally formed when(Hf,Zr)O_(2)films are directly grown on a Si substrate,leading to high depolarization fields and rapid reduction of the remanent *** address these issues,we conducted a study to significantly improve ferroelectricity and switching endurance of(Hf,Zr)O_(2)films with sub-5 nm thicknesses by inserting a TiO_(2)interfacial *** deposition of a Ti film prior to Hf_(0.5)Zr_(0.5)O_(2)film deposition resulted in a high-k TiO_(2)interfacial layer and prevented the direct contact of Hf_(0.5)Zr_(0.5)O_(2)with *** findings show that the high-k TiO_(2)interfacial layer can reduce the SiO_(2)/Si interface trap density and the depolarization field,resulting in a switchable polarization of 60.2μC/cm^(2)for a 5 nm thick Hf_(0.5)Zr_(0.5)O_(2)***,we propose that inserting a high-k TiO_(2)interfacial layer between the Hf_(0.5)Zr_(0.5)O_(2)film and the Si substrate may offer a promising solution to enhancing the ferroelectricity and reliability of(Hf,Zr)O_(2)grown on the Si substrate and can pave the way for next-generation semiconductor devices with improved performance.

关键词： ferroelectric charge trapping hafnia depolarization

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Effects of homogenization temperature on microstructure and mechanical properties of high-speed-extruded Mg–5Bi–3Al alloy

引用

Journal of Magnesium and Alloys 2022年第10期10卷 2833-2846页

作者： Jae Won Cha sang-Cheol Jin Jae-Gil Jung Sung hyuk park School of Materials Science and Engineering Kyungpook National University80 DaehakroDaegu 41566Republic of Korea Advanced Metals Division Korea Institute of Materials ScienceChangwon 51508Republic of Korea

This study investigates the effects of billet homogenization temperature on the dynamic recrystallization behavior during high-speed extrusion and resultant microstructure and tensile properties of the Mg–5Bi–3Al(BA53,wt%)*** billets homogenized at 350 and450℃(350H and 450H billets)are extruded at a high speed of 69 m/*** 350H billet has a relatively smaller grain size and a higher abundance of fine Mg3Bi2particles compared to the 450H *** extrusion of the 350H billet,enhanced dynamic recrystallization occurs as a result of its finer grains and abundance of particles,while the growth of recrystallized grains is suppressed by the grain-boundary pinning effect of ***,the extruded 350H material is characterized by smaller grains,relatively greater number of Mg3Bi2particles,and a higher internal strain energy than the extruded 450H *** tensile strength of the extruded 350H material is higher than that of the extruded 450H material owing to stronger grain-boundary hardening,particle hardening,and strain hardening *** extruded 350H material also exhibits a higher tensile elongation as its smaller grains inhibit the formation of crack-inducing undesirable twins during *** results from this study demonstrate that a decrease in the homogenization temperature from 450 to 350℃leads to improved strength and ductility in the high-speed-extruded BA53 material.

关键词： Mg–Bi–Al alloy High-speed extrusion Homogenization Dynamic recrystallization Tensile properties

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effects of Sn addition on the microstructure and mechanical properties of extruded Mg-Bi binary alloy

引用

Journal of Magnesium and Alloys 2022年第3期10卷 920-931页

作者： sang-Cheol Jin Jong Un Lee Jongbin Go Hui Yu Sung hyuk park School of Materials Science and Engineering Kyungpook National UniversityDaegu 41566South Korea Department of Materials Science and Engineering Kyoto UniversityYoshida-honmachiSakyo-kuKyoto606-8501Japan School of Materials Science and Engineering Hebei University of TechnologyTianjin 300130China

We investigated the effects of Sn addition on the microstructural characteristics and mechanical properties of an extruded Mg-Bi binary alloy by comparing Mg-5 Bi(B5)and Mg-5 Bi-4 Sn(BT54).Both the extruded alloys exhibit a partially recrystallized grain structure with a strong extrusion fiber texture and numerous Mg3Bi2 ***,the addition of Sn significantly decreases the average grain size of the extruded alloy from 123.9 to 75.2μ*** Sn solute atoms inhibit the activity of dislocation slip,which reduces the internal strain energy accumulated in the dynamically recrystallized(DRXed)grains during ***,this reduced strain energy leads to the decrease in the DRXed grain size owing to weakened grain growth during natural *** extruded BT54 alloy exhibits higher tensile strength and ductility than the extruded B5 *** improvement in the strength by the Sn addition is attributed to the combined effects of grain refinement,Sn solute atoms,and increased dislocation *** formation of{10-11}and{10-11}-{10-12}twins during tension is suppressed by the grain refinement,thereby improving the tensile elongation considerably.

关键词： Mg±Bi alloy Extrusion Dynamic recrystallization Microstructure Mechanical properties.

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：