检索结果-南通市图书馆

Accidental esophageal intubation via a large type C congenital tracheoesophageal fistula:A case report

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

World Journal of Clinical Cases 2022年第30期10卷 11198-11203页

作者： Seong Min Hwang Myeong Jin kim Sora kim saeyoung kim Department of Anesthesiology and Pain Medicine School of MedicineKyungpook National UniversityDaegu 41944South Korea

BACKGROUND Tracheoesophageal fistula(TEF)is a congenital anomaly characterized by interruptions in esophageal continuity with or without fistulous communication to the trachea.Anesthetic management during TEF repair is challenging because of the difficulty of perioperative airway management.It is important to determine the appropriate position of the endotracheal tube(ETT)for proper ventilation and to prevent excessive gastric dilatation.Therefore,the tip of the ETT should be placed immediately below the fistula and above the carina.CASE SUMMARY A full-term,one-day-old,2.4 kg,50 cm male neonate was diagnosed with TEF type C.During induction,an ETT was inserted using video laryngoscope and advanced deeply to ensure that the tip passed over the fistula,according to known strategies.The passage of the ETT through the vocal cords was confirmed via video laryngoscope.However,after inflating the ETT cuff,breath sounds were not heard on bilateral lung auscultation.Instead,gastric sounds were heard.Considering that a large fistula(approximately 6.60 mm×4.54 mm)located 10.2mm above the carina was confirmed on preoperative tracheal computed tomography,the possibility of unintentional esophageal intubation was highly suspected.Therefore,we decided to uncuff and withdraw the ETT carefully for repositioning,while monitoring auscultation and end-tidal CO2 simultaneously.At a certain point(9.5 cm from the lip),clear breath sounds and proper end-tidal CO_(2) readings were suddenly achieved,and adequate ventilation was possible.CONCLUSION Preanesthetic anatomical evaluation with imaging studies in TEF is necessary to minimize complications related to airway management.

关键词： Tracheoesophageal fistula Imaging study Anatomy Intubation Airway management Auscultation Case report

Hyperreflective photonic crystals created by shearing colloidal dispersions at ultrahigh volume fraction

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Microsystems & Nanoengineering 2024年第1期10卷 161-173页

作者： Minji kim Jong Bin kim Shin-Hyun kim Department of Chemical and Biomolecular Engineering Korea Advanced Institute of Science and Technology(KAIST)Daejeon 34141Republic of Korea

Colloidal crystallization serves as one of the most economic and scalable production methods for photonic crystals.However,insufficient optical performance,nonuniformity and low reproducibility remain challenges for advanced high-value applications.In this study,we optimally formulate a photocurable dispersion of silica particles and apply shear flow to unify the orientation of the colloidal crystals,ensuring high optical performance and uniformity.The silica particles experience strong repulsion at ultrahigh volume fractions of 50%but demonstrate low mobility,leading to polycrystalline structures.Applying shear flow to the dispersions allows the silica particles to rearrange into larger crystalline domains with a unidirectional orientation along the flow.This shear-induced structural change produces absolute reflectivity at the stopband as high as 90%and a high transparency of 90%at off-resonant wavelengths with minimal diffusive scattering.Furthermore,the strong interparticle repulsion ensures a uniform volume fraction of particles throughout the dispersion,reducing deviations in the optical properties.We intricately micropattern the photocurable dispersions using photolithography.Additionally,the photonic films and patterns can be stacked to form multiple layers,displaying mixed structural colors and multiple reflectance peaks without sacrificing reflectivity.These superior photonic materials hold promise for various optical applications,including optical components and anticounterfeiting patches.

关键词： properties. dispersion reflectivity

Trend of Developing Aqueous Liquid and Gel Electrolytes for Sustainable,Safe,and High‑Performance Li‑Ion Batteries

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro Letters 2024年第1期16卷 17-34页

作者： Donghwan Ji Jaeyun kim School of Chemical Engineering Sungkyunkwan University(SKKU)Suwon 16419Republic of Korea Department of Health Sciences and Technology Samsung Advanced Institute for Health Sciences&Technology(SAIHST)Sungkyunkwan University(SKKU)Suwon 16419Republic of Korea Biomedical Institute for Convergence at SKKU(BICS) Sungkyunkwan University(SKKU)Suwon 16419Republic of Korea Institute of Quantum Biophysics(IQB) Sungkyunkwan University(SKKU)Suwon 16419Republic of Korea Present Address:Department of NanoEngineering University of California San DiegoLa JollaSan DiegoCA 92093USA

Current lithium-ion batteries(LIBs)rely on organic liquid electrolytes that pose significant risks due to their flammability and toxicity.The potential for environmental pollution and explosions resulting from battery damage or fracture is a critical concern.Water-based(aqueous)electrolytes have been receiving attention as an alternative to organic electrolytes.However,a narrow electrochemicalstability window,water decomposition,and the consequent low battery operating voltage and energy density hinder the practical use of aqueous electrolytes.Therefore,developing novel aqueous electrolytes for sustainable,safe,high-performance LIBs remains challenging.This Review first commences by summarizing the roles and requirements of electrolytes–separators and then delineates the progression of aqueous electrolytes for LIBs,encompassing aqueous liquid and gel electrolyte development trends along with detailed principles of the electrolytes.These aqueous electrolytes are progressed based on strategies using superconcentrated salts,concentrated diluents,polymer additives,polymer networks,and artificial passivation layers,which are used for suppressing water decomposition and widening the electrochemical stability window of water of the electrolytes.In addition,this Review discusses potential strategies for the implementation of aqueous Li-metal batteries with improved electrolyte–electrode interfaces.A comprehensive understanding of each strategy in the aqueous system will assist in the design of an aqueous electrolyte and the development of sustainable and safe high-performance batteries.

关键词： Lithium-ion battery(LIB) Aqueous electrolyte Gel electrolyte Electrochemical stability window Li dendrite

Targeting the RAS/RAF/MAPK pathway for cancer therapy: from mechanism to clinical studies

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Signal Transduction and Targeted Therapy 2024年第1期9卷 173-210页

作者： Md Entaz Bahar Hyun Joon kim Deok Ryong kim Department of Biochemistry and Convergence Medical Sciences and Institute of Medical Science Gyeongsang National UniversityCollege of MedicineJinjuSouth Korea Department of Anatomy and Convergence Medical Sciences and Institute of Medical Science Gyeongsang National UniversityCollege of MedicineJinjuSouth Korea

Metastatic dissemination of solid tumors,a leading cause of cancer-related mortality,underscores the urgent need for enhanced insights into the molecular and cellular mechanisms underlying metastasis,chemoresistance,and the mechanistic backgrounds of individuals whose cancers are prone to migration.The most prevalent signaling cascade governed by multi-kinase inhibitors is the mitogen-activated protein kinase(MAPK)pathway,encompassing the RAS–RAF–MAPK kinase(MEK)–extracellular signal-related kinase(ERK)pathway.RAF kinase is a primary mediator of the MAPK pathway,responsible for the sequential activation of downstream targets,such as MEK and the transcription factor ERK,which control numerous cellular and physiological processes,including organism development,cell cycle control,cell proliferation and differentiation,cell survival,and death.Defects in this signaling cascade are associated with diseases such as cancer.RAF inhibitors(RAFi)combined with MEK blockers represent an FDAapproved therapeutic strategy for numerous RAF-mutant cancers,including melanoma,non-small cell lung carcinoma,and thyroid cancer.However,the development of therapy resistance by cancer cells remains an important barrier.Autophagy,an intracellular lysosome-dependent catabolic recycling process,plays a critical role in the development of RAFi resistance in cancer.Thus,targeting RAF and autophagy could be novel treatment strategies for RAF-mutant cancers.In this review,we delve deeper into the mechanistic insights surrounding RAF kinase signaling in tumorigenesis and RAFi-resistance.Furthermore,we explore and discuss the ongoing development of next-generation RAF inhibitors with enhanced therapeutic profiles.Additionally,this review sheds light on the functional interplay between RAF-targeted therapies and autophagy in cancer.

关键词： RAF insight mechanism

Recent Advances in Patterning Strategies for Full‑Color Perovskite Light‑Emitting Diodes

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro Letters 2024年第3期16卷 99-137页

作者： Gwang Heon Lee Kiwook kim Yunho kim Jiwoong Yang Moon Kee Choi Graduate School of Semiconductor Materials and Devices Engineering Center for Future Semiconductor Technology(FUST)Ulsan National Institute of Science and Technology(UNIST)Ulsan 44919Republic of Korea Department of Energy Science and Engineering Daegu Gyeongbuk Institute of Science and Technology(DGIST)Daegu 42988Republic of Korea Energy Science and Engineering Research Center Daegu Gyeongbuk Institute of Science and Technology(DGIST)Daegu 42988Republic of Korea Department of Materials Science and Engineering Ulsan National Institute of Science and Technology(UNIST)Ulsan 44919Republic of Korea Center for Nanoparticle Research Institute for Basic Science(IBS)Seoul 08826Republic of Korea

Metal halide perovskites have emerged as promising light-emitting materials for next-generation displays owing to their remarkable material characteristics including broad color tunability,pure color emission with remarkably narrow bandwidths,high quantum yield,and solution processability.Despite recent advances have pushed the luminance efficiency of monochromic perovskite light-emitting diodes(PeLEDs)to their theoretical limits,their current fabrication using the spincoating process poses limitations for fabrication of full-color displays.To integrate PeLEDs into full-color display panels,it is crucial to pattern red–green–blue(RGB)perovskite pixels,while mitigating issues such as cross-contamination and reductions in luminous efficiency.Herein,we present state-of-the-art patterning technologies for the development of full-color PeLEDs.First,we highlight recent advances in the development of efficient PeLEDs.Second,we discuss various patterning techniques of MPHs(i.e.,photolithography,inkjet printing,electron beam lithography and laserassisted lithography,electrohydrodynamic jet printing,thermal evaporation,and transfer printing)for fabrication of RGB pixelated displays.These patterning techniques can be classified into two distinct approaches:in situ crystallization patterning using perovskite precursors and patterning of colloidal perovskite nanocrystals.This review highlights advancements and limitations in patterning techniques for PeLEDs,paving the way for integrating PeLEDs into full-color panels.

关键词： Perovskite Light-emitting diode Full-color display High-resolution patterning Electroluminescence

Programmable directional color dynamics using plasmonics

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Microsystems & Nanoengineering 2024年第1期10卷 325-334页

作者： Gyurin kim Doeun kim Soeun Ko Jang-Hwan Han Juhwan kim Joo Hwan Ko Young Min Song Hyeon-Ho Jeong School of Electrical Engineering and Computer Science Gwangju Institute of Science and TechnologyGwangju 61005Republic of Korea Department of Semiconductor Engineering Gwangju Institute of Science and TechnologyGwangju 61005Republic of Korea Artificial Intelligence(AI)Graduate School Gwangju Institute of Science and TechnologyGwangju 61005Republic of Korea

Adaptive multicolor filters have emerged as key components for ensuring color accuracy and resolution in outdoor visual devices.However,the current state of this technology is still in its infancy and largely reliant on liquid crystal devices that require high voltage and bulky structural designs.Here,we present a multicolor nanofilter consisting of multilayered‘active’plasmonic nanocomposites,wherein metallic nanoparticles are embedded within a conductive polymer nanofilm.These nanocomposites are fabricated with a total thickness below 100 nm using a‘lithography-free’method at the wafer level,and they inherently exhibit three prominent optical modes,accompanying scattering phenomena that produce distinct dichroic reflection and transmission colors.Here,a pivotal achievement is that all these colors are electrically manipulated with an applied external voltage of less than 1 V with 3.5 s of switching speed,encompassing the entire visible spectrum.Furthermore,this electrically programmable multicolor function enables the effective and dynamic modulation of the color temperature of white light across the warm-to-cool spectrum(3250 K-6250 K).This transformative capability is exceptionally valuable for enhancing the performance of outdoor optical devices that are independent of factors such as the sun’s elevation and prevailing weather conditions.

关键词： directional prevailing exceptional

Dragonfly Interaction Algorithm for Optimization of Queuing Delay in Industrial Wireless Networks

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Bionic Engineering 2024年第1期21卷 447-485页

作者： Sanjay Bhardwaj Da-Hye kim Dong-Seong kim Department of IT Convergence Engineering ICT Convergence Research CenterKumoh National Institute of TechnologyGumiSouth Korea

In industrial wireless networks,data transmitted from source to destination are highly repetitive.This often leads to the queuing of the data,and poor management of the queued data results in excessive delays,increased energy consumption,and packet loss.Therefore,a nature-inspired-based Dragonfly Interaction Optimization Algorithm(DMOA)is proposed for optimization of the queue delay in industrial wireless networks.The term“interaction”herein used is the characterization of the“flying movement”of the dragonfly towards damselflies(female dragonflies)for mating.As a result,interaction is represented as the flow of transmitted data packets,or traffic,from the source to the base station.This includes each and every feature of dragonfly movement as well as awareness of the rival dragonflies,predators,and damselflies for the desired optimization of the queue delay.These features are juxtaposed as noise and interference,which are further used in the calculation of industrial wireless metrics:latency,error rate(reliability),throughput,energy efficiency,and fairness for the optimization of the queue delay.Statistical analysis,convergence analysis,the Wilcoxon test,the Friedman test,and the classical as well as the 2014 IEEE Congress of Evolutionary Computation(CEC)on the benchmark functions are also used for the evaluation of DMOA in terms of its robustness and efficiency.The results demonstrate the robustness of the proposed algorithm for both classical and benchmarking functions of the IEEE CEC 2014.Furthermore,the accuracy and efficacy of DMOA were demonstrated by means of the convergence rate,Wilcoxon testing,and ANOVA.Moreover,fairness using Jain’s index in queue delay optimization in terms of throughput and latency,along with computational complexity,is also evaluated and compared with other algorithms.Simulation results show that DMOA exceeds other bio-inspired optimization algorithms in terms of fairness in queue delay management and average packet loss.The proposed algorithm is also evaluated for the conflicting o

关键词： Dragonfly Damselfly Interaction Queuing delay Optimization Industrial wireless networks

Factors affecting length of stay according to bronchopulmonary dysplasia severity:a nationwide cohort study in Korea

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

World Journal of Pediatrics 2024年第5期20卷 470-480页

作者： Hye Mi Lee Jeongmin Shin Sae Yun kim So Young kim Department of Pediatrics College of MedicineThe Catholic University of KoreaSeoulRepublic of Korea Department of Pediatrics Yeouido St.Mary’s HospitalCollege of MedicineThe Catholic University of Korea1063-roYeongdeungpo-guSeoul07345Republic of Korea

Background Longer hospitalizations for preterm infants with bronchopulmonary dysplasia(BPD)delay developmental outcomes,increase the risk for hospital-acquired complications,and exert a substantial socioeconomic burden.This study aimed to identify factors associated with an extended length of stay(LOS)at different levels of severity of BPD.Methods A cohort study was conducted using the Korean Neonatal Network registry of very low birth weight infants with BPD between 2013 and 2017 through retrospective analysis.Results A total of 4263 infants were diagnosed with BPD.For mild BPD,infants requiring surgical treatment for patent ductus arteriosus needed a longer LOS[eadjustedβcoefficients(adjβ)1.041;95%confidence interval(CI):0.01–0.08]and hydrocephalus(eadjβ1.094;95%CI 0.01–0.17).In moderate BPD,infants administered steroids or with intraventricular hemorrhage required a longer LOS(eadjβ1.041;95%CI 0.00–0.07 and eadjβ1.271;95%CI 0.11–0.38,respectively).In severe BPD,infants with comorbidities required a longer LOS:pulmonary hypertension(eadjβ1.174;95%CI 0.09–0.23),administrated steroid for BPD(eadjβ1.116;95%CI 0.07–0.14),sepsis(eadjβ1.062;95%CI 0.01–0.11),patent ductus arteriosus requiring surgical ligation(eadjβ1.041;95%CI 0.00–0.08),and intraventricular hemorrhage(eadjβ1.016;95%CI 0.05–0.26).Additionally,the higher the clinical risk index score,the longer the LOS needed for infants in all groups.Conclusions The factors affecting LOS differed according to the severity of BPD.Individualized approaches to reducing LOS may be devised using knowledge of the various risk factors affecting LOS by BPD severity.

关键词： Bronchopulmonary dysplasia Length of stay Very low birth weight

Ag-GST/HfO_(x)-based unidirectional threshold switching selector with low leakage current and threshold voltage distribution for high-density cross-point arrays

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Rare Metals 2024年第1期43卷 280-288页

作者： Kyoung-Joung Yoo Dae-Yun Kang Nahyun kim Ho-Jin Lee Ta-Hyeong kim Taeho kim Tae Geun kim School of Electrical Engineering Korea UniversitySeoul 02841Republic of Korea

The use of electrochemical-metallization-based volatile threshold switching selectors in cross-point arrays has been widely explored owing to their high on-off ratios and simple structure.However,these devices are unsuitable for cross-point architectures because of the difficulty in controlling the random filament formation that results in large fluctuations in the threshold voltage during operation.In this study,we investigated the unidirectional threshold transition characteristics associated with an Ag/GST/HfO_(x)/Pt-based bilayer selector and demonstrated the occurrence of a low leakage current(<1×10^(-11) A) and low distribution of the threshold voltage(Δ0.11 V).The bilayer structure could control the filament formation in the intermediate state through the insertion of an HfO_(x) tunneling barrier.By stacking a bilayer selector with NiO_(x)based resistive random-access memory,the leakage and programming currents of the device could be significantly decreased.For the crossbar array configuration,we performed equivalent circuit analysis of a one-selector oneresistor(1S1R) devices and estimated the optimal array size to demonstrate the applicability of the proposed structure.The maximum acceptable crossbar array size of the 1S1R device with the Ag/GST/HfO_(x)/Pt/Ti/NiO_(x)/Pt structure was 5.29×10^(14)(N^(2),N=2.3×10^(7)).

关键词： Selector device Tunneling barrier Threshold switching Sputtering 1S1R Cross-point array