检索结果-南通市图书馆

Evaluation of stress concentration for planar tubular joints

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

中国有色金属学会会刊：英文版 2006年第B1期16卷 1-10页

作者： M.F.GHANAMEH d.THE VENET A.zeghloul Laboratory of Mechanics and Physics of Materials - U.M.R.CNRS N° 7554 University of MetzLPMM57045 MetzFrance Laboratory of Mechanics of Naval Structures ENSIETA29806 BrestFrance Received 10 April 2006 accepted 25 April 2006

In offshore tubular structures, a typical tubular joint may be subjected to three different types of basic loadings: axial, in-plane bending and out-of-plane bending, through its brace members. Each type will cause a different stress distribution at the joint intersection of structures. Moreover, the actual load condition of a tubular joint can be any combination of the above three basic load cases, for this reason, a combined loading was investigated in addition to these three basic loadings. This load is composed of an axial loading combined with a continuation of rotational bending loading obtained while rotate center of the brace around a circle. different types of planar joints such as T, Y, X, K, dT, dY, dX, TY, TK, dTX, dTdY, and dTdK, with braces subjected to combined loading, were numerically analyzed to study the effect of those different cases of loading and different types of joints, on the stress concentration zone and values.

关键词：管子接头焊接应力集中评价应力分布有限元法海洋平台

On the Optimal design of Cable driven Parallel Robot with a Prescribed Workspace for Upper Limb Rehabilitation Tasks

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Journal of Bionic Engineering 2019年第3期16卷 503-513页

作者： Laribi Med Amine Carbone Giuseppe zeghloul said department of GMSC Pprime Institute CNRS-University of Poitiers - ENSMA - UPR 3346 Poitiers France department of Mechanical Energy and Management Engineering University of Calabria 87036 Rende Italy CESTER Technical University of Cluj-Napoca Muncii Ave. 103-105 400641 Cluj-Napoca Romania

This paper deals with an optimization approach to design a cable driven parallel robot intended for upper limb rehabilitation tasks. The cable driven parallel robots have characteristics that make them best candidate for rehabilitation exercise purposes such as large workspace, re-configurable architecture, portability and cost effectiveness. Here, both the cable tensions that are needed to move a wristband as well as the workspace need to be carefully optimized for fulfilling the prescribed operation tasks. A specific case of study is addressed in this work by referring to LA RM wire driven exercising device (LAWEX), which is applied to upper limbs exercises. To that end, a motion capture system is used to collect quantitative data on the prescribed workspace of a human upper limb. A specific optimization problem is settled up for considering combining two optimization goals, namely, the smallest robot size reaching a prescribed workspace and the minimum cable tension distributions. A sequence of optimization steps is defined using Genetic Algorithms (GAs) applied to LAWEX robot. The proposed objective function is based on a mathematical formulation of the power of a point with respect to bounding surfaces in combination with a performance index to show the distributions of the minimum cable tensions.

关键词： LAWEX robot design bionic robot cable-driven robots optimization power of the point rehabilitation tasks

design Study of a Cable-based Gait Training Machine

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Bionic Engineering 2017年第2期14卷 232-244页

作者： Houssein Lamine Med Amine Laribi sami Bennour Lotfi Romdhane said.zeghloul Mechanical Laboratory of Sousse (LMS) National Engineering School of Sousse University of Sousse Sousse 4000 Tunisia department of GMSC Pprime Institute CNRS ENSMA University of Poitiers UPR 3346 France Mechanical Engineering department American University of Sharjah PO Box 26666 Sharjah United Arab Emirates

This paper deals with a design approach of a gait training machine based on a quantitative gait analysis. The proposed training machine is composed of a body weight support device and a cable-driven parallel robot. This paper is focused on the cable-driven robot, which controls the pose of the lower limb through an orthosis placed on the patient＇s leg. The cable robot reproduces a normal gait movement through the motion of the orthosis. A motion capture system is used to perform the quantitative analysis of a normal gait, which will be used as an input to the inverse dynamic model of the cable robot. By means of an optimization algorithm, the optimal design parameters, which minimize the tensions in the cables, are determined. Two constraints are considered, i.e., a non-negative tension in the cables at all times, and a free cable/end-effector collision. Once the optimal solution is computed, a power analysis is carried out in order to size the robot actuators. The proposed approach can be easily extended for the design study of a similar type of cable robots.

关键词： gait rehabilitation cable-driven robots body weight support system design optimization

An Experimental Analysis of Overcoming Obstacle in Human Walking

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Bionic Engineering 2014年第4期11卷 497-505页

作者： Tao Li Marco Ceccarelli Minzhou Luo Med Amine Laribi said.zeghloul Institute of Advanced Manufacturing Technology Hefei Institutes of Physical Science Chinese Academy of Sciences Changzhou 213164 P. R. China Laboratory of Robotics and Mechatronics University of Cassino and South Latium Cassino 03043 Italy Institute PPRIME- dGMSC CNRS-University of Poitiers- ENSMA 15 Rue de l'Hotel Dieu 86000 Poitiers France

In this paper, an experimental analysis of overcoming obstacle in human walking is carried out by means of a motion capture system. In the experiment, the lower body of an adult human is divided into seven segments, and three markers are pasted to each segment with the aim to obtain moving trajectory and to calculate joint variation during walking. Moreover, kinematic data in terms of displacement, velocity and acceleration are acquired as well. In addition, ground reaction forces are measured using force sensors. Based on the experimental results, features of overcoming obstacle in human walking are ana- lyzed. Experimental results show that the reason which leads to smooth walking can be identified as that the human has slight movement in the vertical direction during walking; the reason that human locomotion uses gravity effectively can be identified as that feet rotate around the toe joints during toe-off phase aiming at using gravitational potential energy to provide propulsion for swing phase. Furthermore, both normal walking gait and obstacle overcoming gait are characterized in a form that can provide necessary knowledge and useful databases for the implementation of motion planning and gait planning towards overcoming obstacle for humanoid robots.

关键词： human locomotion overcoming obstacle walking gait biped robot motion capture

Cable-driven Parallel Robot Workspace Identification and Optimal design Based on the Upper Limb Functional Rehabilitation

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Bionic Engineering 2022年第2期19卷 390-402页

作者： Ferdaws Ennaiem Abdelbadia Chaker Juan sandoval sami Bennour Abdelfattah Mlika Lotfi Romdhane said.zeghloul Med Amine Laribi department of GMSC Pprime Institute CNRSENSMAUniversity of PoitiersUPR 3346PoitiersFrance Mechanical Laboratory of Sousse(LMS) National Engineering School of SousseUniversity of Sousse4000 SousseTunisia American University of Sharjah PO Box 26666SharjahUnited Arab Emirates

An assessment of the human motion repeatability for three selected Activities of daily Living(AdL)is performed in this *** exercises were prescribed by an occupational therapist for the upper limb *** movement patterns of five participants,recorded using a Qualisys motion capture system,are compared based on the Analysis of Variance(ANOVA)*** survey is motivated by the need to find the appropriate task workspace of a 6-degrees of freedom cable-driven parallel robot for upper limb rehabilitation,which is able to reproduce the three selected *** comparison is performed to justify,whether or not,there is enough similarity between the participants’gestures,and so a single reference trajectory can be adopted as the robot-prescribed *** the results of the comparative study,an optimization process of the sought robot design is carried out,where the structure size and the cable tensions simultaneously minimized.

关键词： Human motion repeatability Activities of daily Living(AdL) Analysis of Variance(ANOVA) Task workspace Cable-driven parallel robot Upper limb rehabilitation Optimization