检索结果-南通市图书馆

Bone block from lateral window-correcting vertical and horizontal bone deficiency in maxilla posterior site:A case report

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

World Journal of Clinical Cases 2024年第12期12卷 2109-2115页

作者： yu-Lan Wang Wen-Jun shao Min Wang State Key Laboratory of Oral and Maxillofacial Reconstruction and Regeneration Key Laboratory of Oral Biomedicine Ministry of EducationHubei Key Laboratory of StomatologySchool and Hospital of StomatologyWuhan UniversityWuhan 430079Hubei ProvinceChina Department of Oral Implantology School and Hospital of StomatologyWuhan UniversityWuhan 430079Hubei ProvinceChina

BACKGROUND Lateral window approach for sinus floor lift is commonly used for vertical bone augmentation in cases when the residual bone height is less than 5 ***,managing cases becomes more challenging when a maxillary sinus pseudocyst is present or when there is insufficient bone *** this case,we utilized the bone window prepared during the lateral window sinus lift as a shell for horizontal bone *** allowed for simultaneous horizontal and vertical bone augmentation immediately after the removal of the maxillary sinus *** SUMMARY A 28-year-old female presented to our clinic with the chief complaint of missing upper left posterior *** examination showed a horizontal deficiency of the alveolar ridge *** height of the alveolar bone was approximately 3.6 mm on cone beam computed tomography(CBCT).And a typical well-defined'dome-shaped'lesion in maxillary sinus was observed on CBCT *** lateral bony window was prepared using a piezo-ultrasonic device,then the bony window was fixed to the buccal side of the 26 alveolar ridge using a titanium screw with a length of 10 mm and a diameter of 1.5 *** space between the bony window and the alveolar ridge was filled with Bio-Oss,covered with a Bio-Gide collagen membrane,and subsequently *** months later,the patient’s bone width increased from 4.8 to 10.5 mm,and the bone height increased from 3.6 to 15.6 ***,a Straumann^(■)4.1 mm×10 mm implant was *** final all-ceramic crown restoration was completed four months later,and both clinical and radiographic examinations showed that the implant was successful,and the patient was satisfied with the *** The bone block harvested from the lateral window sinus lift can be used for simultaneous horizontal bone augmentation acting as a shell for good two-dimensional bone augmentation.

关键词： Sinus lift Lateral window Dental implant Horizontal bone augmentation Case report

Machine Learning-based Identification of Contaminated Images in Light Curve Data Preprocessing

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Research in Astronomy and Astrophysics 2024年第4期24卷 287-295页

作者： Hui Li Rong-Wang Li peng Shu yu-Qiang Li yunnan Observatories Chinese Academy of SciencesKunming 650216China University of Chinese Academy of Sciences Beijing 100049China Key Laboratory of Space Object and Debris Observation Chinese Academy of SciencesNanjing 210023China

Attitude is one of the crucial parameters for space objects and plays a vital role in collision prediction and debris *** light curves to determine attitude is the most commonly used *** photometric observations,outliers may exist in the obtained light curves due to various ***,preprocessing is required to remove these outliers to obtain high quality light *** statistical analysis,the reasons leading to outliers can be categorized into two main types:first,the brightness of the object significantly increases due to the passage of a star nearby,referred to as“stellar contamination,”and second,the brightness markedly decreases due to cloudy cover,referred to as“cloudy contamination.”The traditional approach of manually inspecting images for contamination is time-consuming and ***,we propose the utilization of machine learning methods as a *** Neural Networks and SVMs are employed to identify cases of stellar contamination and cloudy contamination,achieving F1 scores of 1.00 and 0.98 on a test set,*** also explore other machine learning methods such as ResNet-18 and Light Gradient Boosting Machine,then conduct comparative analyses of the results.

关键词： techniques:image processing methods:data analysis light pollution

Effect of initial ammonium concentration on a one-stage partial nitrification/anammox biofilm system:Nitrogen removal performance and the microbial community

在线全文

学校读者我要写书评

暂无评论

Journal of Environmental Sciences 2024年第9期143卷 176-188页

作者： Mengyu Zhou yun Han Yang Zhuo Fen yu Gaoyuan Hu Dangcong peng School of Municipal and Environmental Engineering Xi’an University of Architecture and TechnologyXi’an 710055China Shaanxi Key Laboratory of Environmental Engineering Xi’an University of Architecture and TechnologyXi’an 710055China Key Laboratory of Northwest Water Resource Environment and EcologyMOEXi’an University of Architecture and TechnologyXi’an 710055China

One-stage partial nitrification coupled with anammox(PN/A)technology effectively reduces the energy consumption of a biological nitrogen removal *** nitrite-oxidizing bacteria(NOB)is essential for this technology to maintain efficient nitrogen removal *** ammonium concentration(IAC)affects the degree of inhibited *** this study,the effect of the IAC on a PN/A biofilm was investigated in a moving bed biofilm *** results showed that nitrogen removal efficiency decreased from 82.49%±1.90%to 64.57%±3.96%after the IAC was reduced from 60 to 20 mg N/L,while the nitrate production ratio increased from 13.87%±0.90%to 26.50%±3.76%.NOB activity increased to1,133.86 mg N/m^(2)/day after the IAC decreased,approximately 4-fold,indicating that the IAC plays an important inhibitory role in *** rate-limiting step in the mature biofilm of the PN/A system is the nitritation process and is not shifted by the *** analysis of the microbial community structure in the biofilm indicates that the IAC was the dominant factor in changes in community *** and *** were the main anammox bacteria,and Nitrosomonas and Nitrospira were the main AOB and NOB,*** did not affect the difference in growth between *** and ***,modulating the IAC promoted the PN/A process with efficient nitrogen removal performance at medium to low ammonium concentrations.

关键词： Biological nitrogen removal Partial nitrification Anammox Ammonium concentration Biofilm

Predictive value of preoperative routine examination for the prognosis of patients with pT2N0M0 or pT3N0M0 colorectal cancer

在线全文

学校读者我要写书评

暂无评论

World Journal of Gastrointestinal Oncology 2024年第6期16卷 2429-2438页

作者： peng-Fei Jing Jin Chen En-Da yu Chao-yu Miao Department of Colorectal Surgery Changhai HospitalSecond Military Medical University/Naval Medical UniversityShanghai 200433China Department of Endocrinology and Metabolism Changhai HospitalSecond Military Medical University/Naval Medical UniversityShanghai 200433China Department of Pharmacology Second Military Medical University/Naval Medical UniversityShanghai 200433China

BACKGROUND In recent years,the incidence of colorectal cancer(CRC)has been *** the popularization of endoscopic technology,a number of early CRC has been ***,despite current treatment methods,some patients with early CRC still experience postoperative recurrence and *** To search for indicators associated with early CRC recurrence and metastasis to identify high-risk *** A total of 513 patients with pT2N0M0 or pT3N0M0 CRC were retrospectively enrolled in this *** of blood routine test,liver and kidney function tests and tumor markers were collected before *** were followed up through disease-specific database and telephone *** recurrence,metastasis or death were used as the end point of study to find the risk factors and predictive value related to early CRC recurrence and *** We comprehensively compared the predictive value of preoperative blood routine,blood biochemistry and tumor markers for disease-free survival(DFS)and overall survival(OS)of *** multivariate analysis demonstrated that low platelet count was significantly associated with poor DFS[hazard ratio(HR)=0.995,95% confidence interval(CI):0.991-0.999,P=0.015],while serum carcinoembryonic antigen(CEA)level(HR=1.008,95%CI:1.001-1.016,P=0.027)and serum total cholesterol level(HR=1.538,95%CI:1.026-2.305,P=0.037)were independent risk factors for *** cutoff value of serum CEA level for predicting OS was 2.74 ng/*** the OS of CRC patients with serum CEA higher than the cutoff value was worse than those with lower CEA level,the difference between the two groups was not statistically significant(P=0.075).CONCLUSION For patients with T2N0M0 or T3N0M0 CRC,preoperative platelet count was a protective factor for DFS,while serum CEA level was an independent risk factor for *** that these measures are easier to detect and more acceptable to patients,they may have broader applications.

关键词： Colorectal cancer Platelet count Serum carcinoembryonic antigen Total cholesterol level Overall survival Disease-free survival

Liposomalα-cyperone targeting bone resorption surfaces suppresses osteoclast differentiation and osteoporosis progression via the PI3K/Akt axis

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano Research 2024年第4期17卷 2949-2959页

作者： Lin Yang Xueying An Wang Gong Wenshu Wu Bin Liu Xiaoyan shao Yansi Xian Rui peng Baosheng Guo Qing Jiang Division of Sports Medicine and Adult Reconstructive Surgery Department of Orthopedic SurgeryNanjing Drum Tower Hospital Clinical College of Nanjing Medical University321 Zhongshan RoadNanjing 210008China Branch of National Clinical Research Center for Orthopedics Sports Medicine and RehabilitationNanjing 210008China State Key Laboratory of Pharmaceutical Biotechnology Medical SchoolNanjing University&Division of Sports Medicine and Adult Reconstructive SurgeryDepartment of Orthopedic SurgeryNanjing Drum Tower HospitalThe Affiliated Hospital of Nanjing University Medical SchoolNanjing 210008China

Osteoporosis is a metabolic dysregulation of bone that occurs mainly in postmenopausal women,and the hyperfunction of osteoclasts is the primary contributor to postmenopausal ***,the development of effective therapeutic drugs and precise delivery systems remains a challenge in the field of anti-absorption ***,we reported theα-cyperone(α-CYP)for anti-osteoporosis and developed a liposome-based nano-drug delivery system ofα-CYP,that specifically targets the bone resorption ***,we found that theα-CYP,one of the major sesquiterpenes of Cyperus rotundus L.,attenuated the progression of osteoporosis in ovariectomized(OVX)mice and down-regulated the expression of phosphorylated proteins of phosphoinositide 3-kinase(PI3K)and protein kinase B(Akt),causing down-regulation of osteoclast-related genes/proteins and curbing osteoclast ***,α-CYP reversed the activation of osteoclastic differentiation and enhanced osteoporosis-related proteins expression caused by PI3K/Akt agonist(YS-49).More importantly,we adopted the osteoclastic resorption surface targeting peptide Asp8 and constructed the liposome(lipαC@Asp8)to deliverα-CYP to osteoclasts and confirmed its anti-osteoporosis effect and enhanced osteoclast inhibition by blocking PI3K/Akt *** conclusion,this study demonstrated thatα-CYP inhibits osteoclast differentiation and osteoporosis development by silencing PI3K/Akt pathway,and the liposome targeting delivery systems loaded withα-CYP might provide a novel and effective strategy to treat osteoporosis.

关键词： osteoporosis α-cyperone osteoclast phosphoinositide 3-kinase/protein kinase B(PI3K/Akt) liposome

Benefit-Risk Assessment of Chinese Medicine Injections for Primary Liver Cancer Based on Multi-criteria Decision Analysis

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Integrative Medicine 2024年第6期30卷 559-564页

作者： ZHANG Rong-rong shao Ming-yi FU yu ZHAO Rui-xia WANG Jing-wen FANG yu-xuan The First Clinical Medical College of Henan University of Traditional Chinese Medicine Zhengzhou450046China Personal Department the First Affiliated Hospital of Henan University of Chinese MedicineZhengzhou450000China Scientific Research Department the First Affiliated Hospital of Henan University of Chinese MedicineZhengzhou450000China Digestive Department the First Affiliated Hospital of Henan University of Chinese MedicineZhengzhou450000China

ObjectiveTo evaluate the benefit-risk of 3 commonly used Chinese medicine injections, Aidi Injection (ADI), Cinobufagin Injection (CINI) and Compound Kushen Injection (CKI), in the treatment of primary liver cancer (PLC), so as to provide a reference for clinical *** controlled trials (RCTs) of ADI, CINI and CKI in the treatment of PLC published in the databases of China National Knowledge Infrastructure, Wanfang, China Science and Technology Journal Database, SinoMed, PubMed, Cochrane Library, and Web of Science were retrieved from January 2020 to October 2022. The data of benefit and risk indicators were combined to obtain the effect value. The multi-criteria decision analysis (MCDA) model was applied to build the decision tree. The benefit value, risk value and benefit risk value of the 3 injections in PLC treatment were calculated. Monte Carlo simulation was carried out to calculate the 95% confidence interval and probability of differences among the 3 injections, so as to optimize the evaluation *** total of 71 RCTs were included. The benefit values of ADI, CINI and CKI combined with transcatheter arterial chemoembolization (TACE) were 42, 38 and 36, respectively. The risk values were 42, 25 and 37, respectively. The benefit risk values were 42, 31 and 37, respectively. The benefit risk differences of ADI vs. CINI, ADI vs. CKI, and CKI vs. CINI were 11 (−0.86, 17.75), 5 (−5.01, 11.09), and 6 (−1.87, 12.63), respectively. The probability that ADI superior to CINI, ADI superior to CKI, and CKI superior to CINI was 96.26%, 77.27%, and 92.62%, *** on the results of MCDA model, CINI combined with TACE has the greatest risk in the treatment of the PLC. Considering the efficacy and safety, the possible priority of the 3 Chinese medicine injections combined with TACE in the treatment of PLC is ADI, CKI and CINI.

关键词： multi-criteria decision analysis benefit-risk assessment Chinese medicine injections primary livercancer

Highly strengthening and toughening biomimetic ceramic structures fabricated via a novel coaxially printing

在线全文

学校读者我要写书评

暂无评论

Journal of Advanced Ceramics 2024年第4期13卷 403-412页

作者： Kunkun Song Shengda Yang Ningqi shao Yantang Zhao peng He Yongfeng Wei Hengzhong Fan Yongsheng Zhang Qiangqiang Zhang State Key Laboratory of Solid Lubrication Lanzhou Institute of Chemical PhysicsChinese Academy of SciencesLanzhou 730000China School of Civil Engineering and Mechanics Lanzhou UniversityLanzhou 730000China Key Laboratory of Mechanics on Disaster and Environment in Western China(Lanzhou University) Ministry of EducationLanzhou 730000.China

Additive manufacturing technology,by manipulating and emulating inherent multiscale,multi-material,and multifunctional structures found in nature,has created new opportunities for constructing heterogeneous structures associated with special properties and achieving ultra-high mechanical performance and reliability in ceramic composite *** this study,we have developed an innovative fabrication method designated as coaxial 3D printing for the synchronous construction of two constituents into ceramic composites with a tooth enamel biomimetic ***,the stiff silicate and flexible epoxy served as a strengthening bridge and toughening layer,*** method differed from the traditional approach of randomly dispersing reinforcing components within a ceramic *** allowed for the direct creation of an internally effective three-dimensional reinforcement network structure in ceramic *** process facilitated synergistic deformation and simultaneous enhancement of multiple materials and hierarchical *** to the uniform distribution of internal stress and effective block of microcrack propagation,the biomimetically structured silicate/epoxy ceramic composite has demonstrated much significant enhancement in mechanical properties,includingcompressive strength(48.8±3.12MPa),flexuralstrength(10.39±1.23MPa),andflexuraltoughness(218.7±54.6kJ/m^(3)),which was 0.5,2.1,and 47.5 times as high as those of the intrinsic brittle silicate ceramics,***-situ characterization and multiscale finite element simulation of microstructural evolution during three-point bending deformation further validated multiple-step features of the fracture process(silicate bridge fracture,interface detachment,epoxy extraction,and rupture),which benefited from interpenetrating structural features achieved by coaxial printing to accomplish with the complex propagating routines of the crack deflection in silicate ceramic *** coaxia

关键词： coaxial 3D printing silicate ceramic composites enamel biomimetic microstructure strengthening bridge tougheninglayer crackdeflection

Genetic Analysis of Structural Styles in the Makran Accretionary Wedge–Insight from Physical Simulations

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Ocean University of China 2024年第1期23卷 157-172页

作者： shao Longfei yu Fusheng GONG Jianming LIAO Jing yu Zhifeng TANG Liang CHEN Jiangong WANG yuefeng NENG yuan School of Earth Sciences China University of PetroleumBeijing 102249China State Key Laboratory of Petroleum Resources and Processing China University of PetroleumBeijing 102249China Qingdao Institute of Marine Geology China Geological SurveyQingdao 266071China China University of Petroleum–Beijing at Karamay Karamay 834000China

The Makran accretionary wedge has the smallest subduction angle among any accretionary prism in the world. The factors controlling the spacing and morphological development of its deep thrust faults, as well as the formation mechanism of shallow normal faults, remain unclear. Meanwhile, the factors affecting the continuity of plane faults must be comprehensively discussed. Clarifying the development characteristics and deformation mechanisms of the Makran accretionary wedge is crucial to effectively guide the exploration of gas hydrate deposits in the area. This study aims to interpret seismic data to identify typical structures in the Makran accretionary wedge, including deep imbricate thrust faults, shallow and small normal faults, wedge-shaped piggyback basins, mud diapirs with fuzzy and disorderly characteristics of reflection, décollements with a northward tilt of 1° – 2°, and large seamounts. Physical simulation-based experiments are performed to comprehensively analyze the results of the plane, section, and slices of the wedge. Results reveal that the distances between and shapes of thrust faults in the deep parts of the Makran accretionary wedge are controlled by the bottom décollement. The uplift of the thrust fault-related folds and the upwelling of the mud diapirs primarily contribute to the formation of small normal faults in the shallow part of the area. The mud diapirs originate from plastic material at the bottom, while those that have developed in the area near the trench are larger. Seamounts and mud diapirs break the continuity of fault plane distribution.

关键词： Makran accretionary wedge structural styles faults distribution physical simulation

Comparison of Adaptive Simulation Observation Experiments of the Heavy Rainfall in South China and Sichuan Basin

在线全文

学校读者我要写书评

暂无评论

Advances in Atmospheric Sciences 2024年第11期 2173-2191页

作者： Linbin HE Weiyi peng yu ZHANG Shiguang MIAO Siqi CHEN Jiajing LI Duanzhou shao Xutao ZHANG College of Ocean and Meteorology Guangdong Ocean University Chinese Academy of Meteorology Sciences Institute of Urban Meteorology China Meteorological Administration School of Marine Sciences Nanjing University of Information Science and Technology Dalian Marine Center Ministry of Nature Resources of the People's Republic of China

This study examines the effectiveness of adaptive observation experiments using the ensemble transformation sensitivity(ETS) method to improve precipitation forecasts during heavy rainfall events in South China and the Sichuan Basin. High-resolution numerical models are employed to simulate adaptive observations. By identifying the sensitive areas of key weather system positions 42 hours before heavy rainfall events, the adaptive observations improve the prediction of jet streams, strong winds, and shear lines, which are essential for accurate heavy rainfall forecasting. This improvement is reflected in both the precipitation structure and location accuracy within the verification region. In South China, targeted observations enhance rainfall predictions by improving water vapor transport. In the Sichuan Basin, adaptive observations refine water vapor transport and adjust vortex dynamics. This research highlights the importance of accurately predicting shear lines and jet streams for forecasting heavy rainfall in these areas. Overall, this study found that adaptive observation enhances the precipitation forecast skills of the structure and location for heavy rainfall in South China and the Sichuan Basin, emphasizing their potential utility in operational numerical weather prediction.

关键词：