检索结果-南通市图书馆

Effects of carbon content on the microstructure and tensile properties of a low-density steel

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2025年第2期32卷 391-401页

作者： Yongxuan shang Mingyu Fan Shuyong Jiang Zhongwu Zhang Key Laboratory of Superlight Materials and Surface Technology Ministry of EducationCollege of Materials Science and Chemical EngineeringHarbin Engineering UniversityHarbin 150001China State Key Laboratory of Metal Material for Marine Equipment and Application Iron&Steel Research Institute of Ansteel Group CorporationAnshan 114009China

Carbon can change the phase components of low-density steels and influence the mechanical *** this study,a new method to control the carbon content and avoid the formation ofδ-ferrite by decarburization treatment was *** microstructural changes and mechanical characteristics with carbon content induced by decarburization were systematically ***-Jaoul(C-J)analysis was employed to examine the work hardening characteristics during the tensile *** decarburization by heat treatments,the carbon content within the austenite phase decreased,while Mn and Al were almost unchanged;this made the steel with full austenite transform into the austenite and ferrite dual ***,(Ti,V)C carbides existed in both matrix phase and the mole fraction almost the *** addition,the formation of other carbides *** loss induced a decrease in strength due to the weakening of the carbon solid *** the steel with the single austinite,the deformation mode of austenite was the dislocation planar glide,resulting in the formation of *** the dual-phase steel,the deformation occurred by the dislocation planar glide of austenite first,with the increase in strain,the cross slip of ferrite took place,forming dislocation cells in *** the late stage of deformation,the work hardening of austinite increased rapidly,while that of ferrite increased slightly.

关键词： low-density steels carbon content decarburization strengthening mechanisms work hardening behavior

Electrocatalytic nitrite reduction to ammonia on isolated bismuth alloyed ruthenium

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 369-376页

作者： Shiyao shang Fuzhou Wang Zeyi Sun Chaofan Qiang Ke Chu School of Materials Science and Engineering Lanzhou Jiaotong University

Electrochemical reduction of NO2-to NH3（NO2-RR） is recognized as an appealing approach for achieving renewable NH3synthesis and waste ***,we report isolated Bi alloyed Ru （Bi1Ru） as an efficient NO2-RR *** calculations and in situ electrochemical measurements reveal the creation of Bi1-Ru dual sites which can remarkably promote NO2-activation and suppress proton adsorption,while accelerating the NO2-RR protonation energetics to render a high NO2--to-NH3conversion ***,Bi1Ru assembled in a flow cell delivers an NH3yield rate of 1901.4μmol h-1cm-2and an NH3-Faradaic efficiency of 94.3%at an industrial-level current density of 324.3 mA *** study offers new perspectives for designing and constructing p-block single-atom alloys as robust and high-current-density NO2-RR catalysts toward the ammonia electrosynthesis.

关键词： Ammonia

新时代背景下有机化学课程的思政教学研究与探索

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

广州化工 2022年第10期50卷 147-150页

作者：张甜尚晓凯冯勋洛阳师范学院化学化工学院河南洛阳471934

基于立德树人根本目标,聚焦专业育人本质,以有机化学课程为例,通过对高校课程思政现状分析,结合时代特点,探讨专业思政与课程融合的具体思路和实现路径,提升教师全面育人能力的方式与方法,同时确立以专业为依托、“两团队”+“三一体”... 详细信息

基于立德树人根本目标,聚焦专业育人本质,以有机化学课程为例,通过对高校课程思政现状分析,结合时代特点,探讨专业思政与课程融合的具体思路和实现路径,提升教师全面育人能力的方式与方法,同时确立以专业为依托、“两团队”+“三一体”共同引领、课程协同实施为特色的“课程思政”教育教学改革新模式。力求使课程思政无论在教学内容还是教学方法上都有新的突破,有力促进全员、全程、全方位育人目标的实现。

关键词：有机化学课程思政专业育人

Structural Modal Parameter Recognition and Related Damage Identification Methods under Environmental Excitations: A Review

在线全文

学校读者我要写书评

暂无评论

Structural Durability & Health Monitoring 2025年第1期19卷 25-54页

作者： Chao Zhang shang-Xi Lai Hua-Ping Wang School of Civil Engineering and Mechanics Lanzhou UniversityLanzhou730000China Key Laboratory of Special Functional Materials and Structural Design Ministry of EducationLanzhou UniversityLanzhou730000China

Modal parameters can accurately characterize the structural dynamic properties and assess the physical state of the ***,it is particularly signiﬁcant to identify the structural modal parameters according to the monitoring data information in the structural health monitoring(SHM)system,so as to provide a scientiﬁc basis for structural damage identiﬁcation and dynamic model modiﬁ*** view of this,this paper reviews methods for identifying structural modal parameters under environmental excitation and brieﬂy describes how to identify structural damages based on the derived modal *** paper primarily introduces data-driven modal parameter recognition methods(e.g.,time-domain,frequency-domain,and time-frequency-domain methods,etc.),brieﬂy describes damage identiﬁcation methods based on the variations of modal parameters(e.g.,natural frequency,modal shapes,and curvature modal shapes,etc.)and modal validation methods(e.g.,Stability Diagram and Modal Assurance Criterion,etc.).The current status of the application of artiﬁcial intelligence(AI)methods in the direction of modal parameter recognition and damage identiﬁcation is further *** on the pre-vious analysis,the main development trends of structural modal parameter recognition and damage identiﬁcation methods are given to provide scientiﬁc references for the optimized design and functional upgrading of SHM systems.

关键词： Structural health monitoring data information modal parameters damage identiﬁcation AI method

Orbitronics for energy-efficient magnetization switching

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China(Information Sciences) 2025年第1期68卷 398-399页

作者： Yuxuan YAO Daoqian ZHU Qingtao XIA Jianing LIANG Yuhao JIANG Zhiyang PENG Jiaxu LI Chen xiao Renyou XU Wenwen WANG Xiantao shang Shiyang LU Dapeng ZHU Hong-Xi LIU kaihua CAO Weisheng ZHAO Fert Beijing Institute School of Integrated Circuit Science and Engineering Beihang University National Key Lab of Spintronics Institute of International Innovation Beihang University Qingdao Research Institute Beihang University Truth Memory Corporation

Spin-orbit torque （SOT）,as a promising writing method for magnetic random-access memory （MRAM）,has garnered widespread interest for over a decade [1].Heavy metals,such as β-W,have been broadly adopted as spin current sources,but suffer from phase change at a limited thickness,resulting in a dramatic reduction of the charge-tospin conversion efficiency θSH[2].The thickness limitation leads to stringent etching conditions and large distribution among devices,posing challenges for simultaneously satisfying SOT efficiency,etching-stop margins,and back-end-ofline （BEOL） compatibility.

关键词：

同方期刊数据库

Unraveling the significance of cobalt on transformation kinetics,crystallography and impact toughness in high-strength steels

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2025年第2期32卷 380-390页

作者： Yishuang Yu Jingxiao Zhao Xuelin Wang Hui Guo Zhenjia Xie Chengjia shang Collaborative Innovation Center of Steel Technology University of Science and Technology BeijingBeijing 100083China School of Materials Science and Engineering Shanghai Jiao Tong UniversityShanghai 200240China State Key Laboratory for Advanced Metals and Materials University of Science and Technology BeijingBeijing 100083China

This work reveals the significant effects of cobalt(Co)on the microstructure and impact toughness of as-quenched highstrength steels by experimental characterizations and thermo-kinetic *** results show that the Co-bearing steel exhibits finer blocks and a lower ductile-brittle transition temperature than the steel without ***,the Co-bearing steel reveals higher transformation rates at the intermediate stage with bainite volume fraction ranging from around 0.1 to *** improved impact toughness of the Co-bearing steel results from the higher dense block boundaries dominated by the V1/V2 variant ***,the addition of Co induces a larger transformation driving force and a lower bainite start temperature(BS),thereby contributing to the refinement of blocks and the increase of the V1/V2 variant *** findings would be instructive for the composition,microstructure design,and property optimization of high-strength steels.

关键词： high-strength steel cobalt transformation kinetics crystallography impact toughness

Robust interface and excellent as-built mechanical properties of Ti–6Al–4V fabricated through laser-aided additive manufacturing with powder and wire

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2025年第1期32卷 154-168页

作者： Fei Weng Guijun Bi Youxiang Chew shang Sui Chaolin Tan Zhenglin Du Jinlong Su Fern Lan Ng Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials Ministry of EducationShandong Engineering&Technology Research Center for Superhard MaterialSchool of Materials Science and EngineeringShandong UniversityJinan 250061China Institute of Intelligent Manufacturing Guangdong Academy of SciencesGuangzhou 510095China Singapore Institute of Manufacturing Technology 5 Cleantech Loop636732Singapore

The feasibility of manufacturing Ti-6Al-4V samples through a combination of laser-aided additive manufacturing with powder(LAAM_(p))and wire(LAAM_(w))was explored.A process study was first conducted to successfully circumvent defects in Ti-6Al-4V deposits for LAAM_(p) and LAAM_(w),*** the optimized process parameters,robust interfaces were achieved between powder/wire deposits and the forged substrate,as well as between powder and wire *** characterization results revealed the epitaxial prior β grains in the deposited Ti-6Al-4V,wherein the powder deposit was dominated by a finerα′microstructure and the wire deposit was characterized by lamellar α *** mechanisms of microstructure formation and correlation with mechanical behavior were analyzed and *** mechanical properties of the interfacial samples can meet the requirements of the relevant Aerospace Material Specifications(AMS 6932)even without post heat *** fracture occurred within the interfacial area,further suggesting the robust *** findings of this study highlighted the feasibility of combining LAAM_(p) and LAAM_(w) in the direct manufacturing of Ti-6Al-4V parts in accordance with the required dimensional resolution and deposition rate,together with sound strength and ductility balance in the as-built condition.

关键词： laser-aided additive manufacturing powder deposition wire deposition interfacial characteristic mechanical behavior

Construction of 3D porous Cu_(1.81)S/nitrogen-doped carbon frameworks for ultrafast and long-cycle life sodium-ion storage

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2025年第1期32卷 191-200页

作者： Chen Chen Hongyu Xue Qilin Hu Mengfan Wang Pan shang Ziyan Liu Tao Peng Deyang Zhang Yongsong Luo Key Laboratory of Microelectronics and Energy of Henan Province Henan Joint International Research Laboratory of New Energy Storage TechnologyCollege of Physics and Electronic EngineeringXinyang Normal UniversityXinyang 464000China School of Physics and Electronic Engineering Nanyang Normal UniversityNanyang 473061China

Transition metal sulfides have great potential as anode mterials for sodium-ion batteries(SIBs)due to their high theoretical specific ***,the inferior intrinsic conductivity and large volume variation during sodiation-desodiation processes seriously affect its high-rate and long-cyde performance,unbeneficial for the application as fast-charging and long-cycling SIBs ***,the three-dimensional porous Cu_(1.81)S/nitrogen-doped carbon frameworks(Cu_(1.81)S/NC)are synthesized by the simple and facile sol-gel and annealing processes,which can accommodate the volumetric expansion of Cu_(1.81)S nanoparticles and accelerate the transmission of ions and electrons during Na^(+)insertion/extraction processes,exhibiting the excellent rate capability(250.6 mA·g^(-1)at 20.0 A·g^(-1))and outstanding cycling stability(70% capacity retention for 6000 cycles at 10.0 A·g^(-1))for ***,the Na-ion full cells coupled with Na_(3)V_(2)(PO_(4))_(3)/C cathode also demonstrate the satisfactory reversible specific capacity of 330.5 mAh·g^(-1)at 5.0 A·g^(-1)and long-cycle performance with the 86.9% capacity retention at 2.0 A·g^(-1)after 750 *** work proposes a promising way for the conversionbased metal sulfides for the applications as fast-charging sodium-ion battery anode.

关键词： copper sulfide nanoparticles porous carbon framework fast charging long-cycle performance sodium-ion full batteries

在线全文

学校读者我要写书评

暂无评论

核心素养导向下的中学化学课堂有效教学设计

广州化工 2023年第4期51卷 230-232页

作者：赵钰冯勋张甜尚晓凯段祥洛阳师范学院化学化工学院河南洛阳471934

《中国学生发展核心素养》的正式发布,意味着化学学科核心素养在中学化学课堂中发挥着越来越重要的作用,“科学探究”是化学学科核心素养之一,有利于学生问题解决能力的提高和辩证思维能力的发展。本文从化学教学现状的调研、有效教学... 详细信息

《中国学生发展核心素养》的正式发布,意味着化学学科核心素养在中学化学课堂中发挥着越来越重要的作用,“科学探究”是化学学科核心素养之一,有利于学生问题解决能力的提高和辩证思维能力的发展。本文从化学教学现状的调研、有效教学设计途径的优化和基于“科学探究”的教学设计分析展开论述,并以“探究食品干燥剂主要成分”的课堂教学为例,为中学化学有效教学设计课堂提供了一定的依据和借鉴参考。

关键词：化学学科核心素养有效课堂教学设计知识融合