检索结果-南通市图书馆

Effect of Eu3+,Bi3+,and Li+ doping on luminescent property of GdNbO4

在线全文

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第1期42卷 66-75页

作者： s.W.Wi Y.s.Lee Department of Physics and Integrative Institute of Basic sciences Soongsil University

We investigated the emission properties of Eu3+-doped GdNbO4-based oxide phosphors,aiming at improving the Eu3+emission by codoping of Bi3+and Li+.Eu3+singly doped,Eu3+and Bi3+doubly doped,and Eu3+,Bi3+,and Li+triply doped GdNbO4were prepared using a high-temperature solid-state reaction method.The red-orange emissions from Eu3+in the singly doped samples are significantly improved by the codoping of Bi3+,mainly due to the energy transfer from Bi3+to Eu3+.The additional codoping of Li+is found to increase the Eu3+emission significantly.This improvement might be attributed to the increase in the photoluminescent quantum yield originating from larger grain sizes and better crystallinity.A detailed analysis of the X-ray diffraction pattern and the asymmetric ratio estimated from the photoluminescence spectra show that the local lattice environment around Eu3+in GdNbO4does not change significantly with the codoping of Bi3+and Li+.Our results indicate that Li+doping is a promising way to improve the emission properties of rare-earth ion-doped GdNbO4phosphors.

关键词： Eu 3+ GdNbO 4 Codoping of Li + Photoluminescence sensitizer Rare earths

The emerging role of exercise as a cancer treatment

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of sport and Health science 2024年第4期13卷 443-444页

作者： Kerry s.Courneya Faculty of Kinesiology Sportand RecreationCollege of Health SciencesUniversity of AlbertaEdmontonAlbertaT6G 2H9Canada

Over the past few decades,exercise oncology has emerged as an important subfield within exercise science.Over that time,substantial progress has been made in understanding the role of exercise in people newly diagnose... 详细信息

关键词： cancer treatment exercise

Tribological behavior of lubricant-impregnated porous polyimide

在线全文

学校读者我要写书评

暂无评论

Friction 2024年第4期12卷 711-725页

作者： Jinbang LI Ningning ZHOU Janet s.s.WONG school of Mechanical Engineering and Mechanics Ningbo UniversityNingbo 315211China Beijing Key Laboratory of Long-life Technology of Precise Rotation and Transmission Mechanisms Beijing Institute of Control EngineeringBeijing 100029China Department of Mechanical Engineering Imperial College LondonLondon SW72AZUK

Porous materials impregnated with lubricants can be used in conditions where limited lubricant is desirable.In this work,three porous polyimides(PPI)with different densities were prepared.Polyalphaolefin(PAO)impregnated PPI(iPPI)discs were rubbed against steel and sapphire balls.In operando observations of the iPPI-sapphire contacts show that oil is released under an applied load,forming a meniscus around contacts.Cavitation at the outlet is created at high sliding speeds.The amount of released oil increases with increasing PPI porosity.Contact moduli,E*,estimated based on the actual contact size show that trapped oil in iPPIs contributes to load support.At higher speeds,tribological rehydration of the contact occurs in low density iPPI,with that E*rises with speed.For high density PPIs,high speeds give a constantly high E*which is limited by the viscoelastic properties of the PPI network and possibly the rate of oil exudation.Friction of iPPI-steel contacts is governed by the mechanical properties of the PPI,the flow of the lubricant,and the roughness of the PPI surfaces.For low-and medium-density(highly porous,high roughness)PPIs,large amount of oil is released,and lubrication is mainly via lubricant restricted in the contact in the pores and possibly tribological rehydration.For high density(low porosity)PPI,with lower roughness,hydrodynamic lubrication is achieved which gives the lowest friction.Our results show that polymeric porous materials for effective lubrication require the optimization of its surface roughness,stiffness,oil flow,and oil retentions.

关键词： polyimide porous material friction mechanism polymer limited lubrication

Detection and clearance in Alzheimer’s disease: leading with illusive chemical, structural and morphological features of the targets

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Neural Regeneration Research 2024年第3期19卷 497-498页

作者： Luís Gales i3s−Instituto de Investigação e Inovação em saúde Rua Alfredo AllenPortoPortugal(Gales L)IBMC−Instituto de Biologia Molecular e CelularUniversidade do PortoRua Alfredo AllenPortoPortugal ICBAs−Instituto de Ciências Biomédicas Abel salazar Rua de Jorge Viterbo FerreiraPortoPortugal

Highly specific interactions between biomolecules,such as antigen-antibody,protein-ligand,or nucleic acid base pair complementary are on the basis of the organization of complex organisms.The same principles may be tentatively used in molecular medicine for diagnosis and therapeutics.A molecule can be designed to selectively bind a protease and thereby inhibit the production of a peptide that forms toxic aggregates in the brain or an antibody may be produced to bind specifically to that peptide for detection or clearance purposes.Unfortunately,interference in biological systems is not that simple.For a start there is the inhibition of the physiological role of the protease;moreover,several cleavage fragments may be produced,which may continue to diverge due to putative post-translational modification and self-assembly processes,hiding the toxic target in a“soup”of peptide species varying in size,structure and chemical composition.A perspective of the current status and challenges in targeting peptide species for diagnosis and treatment in the context of Alzheimer’s disease is given.

关键词： Alzheimer diagnosis thereby

Enhancing fatigue performance of AZ31 magnesium alloy components fabricated by cold metal transfer-based wire arc directed energy deposition through LPB

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第4期12卷 1638-1662页

作者： shambhu Kumar Manjhi srikanth Bontha A.s.s.Balan Department of Mechanical Engineering National Institute of Technology KarnatakaSurathkalSrinivasanagarMangaloreKarnataka 575025India

Cold Metal Transfer-Based Wire Arc Directed Energy Deposition(CMT-WA-DED)presents a promising avenue for the rapid fabrication of components crucial to automotive,shipbuilding,and aerospace industries.However,the susceptibility to fatigue of CMT-WA-DED-produced AZ31 Mg alloy components has impeded their widespread adoption for critical load-bearing applications.In this study,a comprehensive investigation into the fatigue behaviour of WA-DED-fabricated AZ31 Mg alloy has been carried out and compared to commercially available wrought AZ31 alloy.Our findings indicate that the as-deposited parts exhibit a lower fatigue life than wrought Mg alloy,primarily due to poor surface finish,tensile residual stress,porosity,and coarse grain microstructure inherent in the WA-DED process.Low Plasticity Burnishing(LPB)treatment is applied to mitigate these issues,which induce significant plastic deformation on the surface.This treatment resulted in a remarkable improvement of fatigue life by 42%,accompanied by a reduction in surface roughness,grain refinement and enhancement of compressive residual stress levels.Furthermore,during cyclic deformation,WA-DED specimens exhibited higher plasticity and dislocation density compared to both wrought and WA-DED+LPB specimens.A higher fraction of Low Angle Grain Boundaries(LAGBs)in WA-DED specimens contributed to multiple crack initiation sites and convoluted crack paths,ultimately leading to premature failure.In contrast,wrought and WA-DED+LPB specimens displayed a higher percentage of High Angle Grain Boundaries(HAGBs),which hindered dislocation movement and resulted in fewer crack initiation sites and less complex crack paths,thereby extending fatigue life.These findings underscore the effectiveness of LPB as a post-processing technique to enhance the fatigue performance of WA-DED-fabricated AZ31 Mg alloy components.Our study highlights the importance of LPB surface treatment on AZ31 Mg components produced by CMT-WA-DED to remove surface defects,enabling their widespread use in load-bea

关键词： Wire arc additive manufacturing AZ31 Mg alloy Low plasticity burnishing Low cycle fatigue test strain amplitude

Ren-integrable and ren-symmetric integrable systems

在线全文

学校读者我要写书评

暂无评论

Communications in Theoretical Physics 2024年第3期76卷 62-69页

作者： s Y Lou school of Physical science and Technology Ningbo UniversityNingbo315211China

A new type of symmetry,ren-symmetry,describing anyon physics and corresponding topological physics,is proposed.Ren-symmetry is a generalization of super-symmetry which is widely applied in super-symmetric physics such as super-symmetric quantum mechanics,super-symmetric gravity,super-symmetric string theory,super-symmetric integrable systems and so on.supersymmetry and Grassmann numbers are,in some sense,dual conceptions,and it turns out that these conceptions coincide for the ren situation,that is,a similar conception of ren-number(R-number)is devised for ren-symmetry.In particular,some basic results of the R-number and ren-symmetry are exposed which allow one to derive,in principle,some new types of integrable systems including ren-integrable models and ren-symmetric integrable systems.Training examples of ren-integrable KdV-type systems and ren-symmetric KdV equations are explicitly given.

关键词： symmetries integrable systems anyon physics extended supersymmetry ren-symmetry

Transjugular intrahepatic portosystemic shunt for recompensating decompensated cirrhosis?

在线全文

学校读者我要写书评

暂无评论

World Journal of Gastroenterology 2024年第20期30卷 2621-2623页

作者： Dimitrios s Karagiannakis Academic Department of Gastroenterology and Hepatology Medical School of National and Kapodistrian University of AthensGeneral Hospital of Athens“Laiko”Athens 11527Greece

Transjugular intrahepatic portosystemic shunt(TIPs)is a medical procedure that has been used to manage variceal bleeding and ascites in patients with cirrhosis.It can prevent further decompensation and improve the survival of high-risk decompensated patients.Recent research indicates that TIPs could increase the possibility of recompensation of decompensated cirrhosis when it is combined with adequate suppression of the causative factor of liver disease.However,the results of the studies have been based on retrospective analysis,and further validation is required by conducting randomized controlled studies.In this context,we highlight the limitations of the current studies and emphasize the issues that must be addressed before TIPs can be recommended as a potential recompensating tool.

关键词： Decompensated cirrhosis Liver recompensation Baveno VII Transjugular intrahepatic portosystemic shunt

AutoRhythmAI: A Hybrid Machine and Deep Learning Approach for Automated Diagnosis of Arrhythmias

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Computers, Materials & Continua 2024年第2期78卷 2137-2158页

作者： s.Jayanthi s.Prasanna Devi Department of Computer science and Engineering SRM Institute of Science and Technology-Vadapalani CampusChennaiTamil NaduIndia

In healthcare,the persistent challenge of arrhythmias,a leading cause of global mortality,has sparked extensive research into the automation of detection using machine learning(ML)algorithms.However,traditional ML and AutoML approaches have revealed their limitations,notably regarding feature generalization and automation efficiency.This glaring research gap has motivated the development of AutoRhythmAI,an innovative solution that integrates both machine and deep learning to revolutionize the diagnosis of arrhythmias.Our approach encompasses two distinct pipelines tailored for binary-class and multi-class arrhythmia detection,effectively bridging the gap between data preprocessing and model selection.To validate our system,we have rigorously tested AutoRhythmAI using a multimodal dataset,surpassing the accuracy achieved using a single dataset and underscoring the robustness of our methodology.In the first pipeline,we employ signal filtering and ML algorithms for preprocessing,followed by data balancing and split for training.The second pipeline is dedicated to feature extraction and classification,utilizing deep learning models.Notably,we introduce the‘RRI-convoluted trans-former model’as a novel addition for binary-class arrhythmias.An ensemble-based approach then amalgamates all models,considering their respective weights,resulting in an optimal model pipeline.In our study,the VGGRes Model achieved impressive results in multi-class arrhythmia detection,with an accuracy of 97.39%and firm performance in precision(82.13%),recall(31.91%),and F1-score(82.61%).In the binary-class task,the proposed model achieved an outstanding accuracy of 96.60%.These results highlight the effectiveness of our approach in improving arrhythmia detection,with notably high accuracy and well-balanced performance metrics.

关键词： Automated machine learning neural networks deep learning arrhythmias

Machine learning-enhanced Monte Carlo and subset simulations for advanced risk assessment in transportation infrastructure

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Mountain science 2024年第2期21卷 690-717页

作者： Furquan AHMAD Pijush sAMUI s.s.MIsHRA Department of Civil Engineering National Institute of TechnologyPatna 800006India

The maintenance of safety and dependability in rail and road embankments is of utmost importance in order to facilitate the smooth operation of transportation networks.This study introduces a comprehensive methodology for soil slope stability evaluation,employing Monte Carlo simulation(MCs)and subset simulation(ss)with the"UPss 3.0 Add-in"in Ms-Excel.Focused on an 11.693-meter embankment with a soil slope(inclination ratio of 2H:1V),the investigation considers earthquake coefficients(kh)and pore water pressure ratios(ru)following Indian zoning requirements.The chance of slope failure showed a considerable increase as the Coefficient of Variation(COV),seismic coefficients(kh),and pore water pressure ratios(ru)experienced an escalation.The ss approach showed exceptional efficacy in calculating odds of failure that are notably low.Within computational modeling,the study optimized the worst-case scenario using ANFIs-GA,ANFIs-GWO,ANFIs-PsO,and ANFIs-BBO models.The ANFIs-PsO model exhibits exceptional accuracy(training R2=0.9011,RMsE=0.0549;testing R2=0.8968,RMsE=0.0615),emerging as the most promising.This study highlights the significance of conducting thorough risk assessments and offers practical insights into evaluating and improving the stability of soil slopes in transportation infrastructure.These findings contribute to the enhancement of safety and reliability in real-world situations.

关键词： Monte Carlo simulation subset simulation Machine Learning seismic coefficient