检索结果-南通市图书馆

Compelling Challenges in Antenna Technologies for Future Medical Applications

在线全文

学校读者我要写书评

暂无评论

Engineering 2022年第4期8卷 15-17页

作者： Koichi ito Center for Frontier Medical Engineering Chiba UniversityChiba 263-8522Japan

*** Numerous types of antennas have been developed,tested,and utilized for medical applications such as diagnosis,treatment,data transmission,and wireless power transfer(WPT).Recently,compact and robust antennas are needed to realize implantable and wearable wireless devices for medical applications such as delivering drugs from implanted capsules,stimulating nerve systems,and monitoring physiological data[1].Because antennas for medical applications are used close to or in a human body,their effects on the human body should be included in their development and evaluation[2].However,it is rather difficult due to ethical and practical reasons to employ a real human body when experimentally evaluating the characteristics of antennas or wireless devices for medical ***,numerical simulations are generally conducted as an alternative,using elaborate digital human models[3].Many different types of software are now commercially available for this purpose,along with digital human-body models.

关键词： antennas utilized diagnosis

Field emission characteristics of nano-sheet carbon films deposited by quartz-tube microwave plasma chemical vapour deposition

在线全文

学校读者我要写书评

暂无评论

Chinese Physics B 2008年第4期17卷 1467-1471页

作者：顾广瑞金哲 ito Toshimichi Department of Physics College of ScienceYanbian University Division of Electrical Electronic and Information EngineeringGraduate School of EngineeringOsaka University

Nano-sheet carbon films are prepared on Si wafers by means of quartz-tube microwave plasma chemical vapour deposition （MPCVD） in a gas mixture of hydrogen and methane. The structure of the fabricated films is investigated by using field emission scanning electron microscope （FESEM） and Raman spectroscopy. These nano^carbon films are possessed of good field emission （FE） characteristics with a low threshold field of 2.6 V/μm and a high current density of 12.6 mA/cm^2 at an electric field of 9 V/μm. As the FE currents tend to be saturated in a high E region, no simple Fowler-Nordheim （F-N） model is applicable. A modified F N model considering statistic effects of FE tip structures and a space-charge-limited-current （SCLC） effect is applied successfully to explaining the FE data observed at low and high electric fields, respectively.

关键词： field emission carbon films nano-sheet microwave plasma chemical vapour deposition

Imbricate structure of the Otakeyama area, Okayama Permian Yoshii Group in the Prefecture, southwest Japan

在线全文

学校读者我要写书评

暂无评论

Frontiers of Earth Science 2015年第1期9卷 152-163页

作者： Tsuyoshi ito Atsushi MATSUOKA State Key Laboratory of Geo-processes and Mineral Resources China University of Geosciences Wuhan 430074 China Department of Geology Faculty of Science Niigata University Niigata 950-2181 Japan

The Yoshii Group of the Akiyoshi terrane is distributed over the Otakeyama area, Okayama Prefecture, southwest Japan. The Yoshii Group is composed of siliceous rocks and clastics, comprising chert-clastic sequences. The Yoshii Group is divided into four structural units （Units Ot 1, Ot 2, Ot 3, and Ot 4） in structurally ascending order. Lithological similarities and radiolarian age suggest that these units exhibit almost identical ocean plate stratigraphy. These units are structurally-repeated to form an imbricate structure. This structure was possibly formed by off-scrape accretion at a toe of an accretionary complex. Additionally, a review of previous studies indicates that an imbricate structure is common in the Akiyoshi terrane. The presence of an imbricate structure in the Akiyoshi terrane, Permian accretionary complex, indicates the possibility that a specific horizon of Permian pelagic sequences acted as a drcollement zone.

关键词： accretionary complex imbricate structure,Permian radiolafia Yoshii Group Okayama Prefecture,southwest Japan

Visible light-curable polymers for biomedical applications

在线全文

学校读者我要写书评

暂无评论

Science China Chemistry 2014年第4期57卷 510-521页

作者： ZHOU Di ito Yoshihiro Emergent Bioengineering Materials Research Team RIKEN Center for Emergent Matter Science Jiangsu Key Laboratory of Advanced Functional Materials School of Chemistry and Material EngineeringChangshu Institute of Technology

Photocurable systems, which offer advantages such as microfabrication and in situ fabrication, have been widely used as dental restorative materials. Because the visible light-curable(VLC) system causes no biological damage, it is popular as a dental material and is being investigated by many researchers for other medical applications. Here, the principle of the VLC system is explained and recent progress in key components including photoinitiators, monomers, macromers, and prepolymers is discussed. Finally, biomedical applications for drug delivery and soft tissue engineering are reviewed. Considering the recent development of VLC systems, its importance in the field of medical applications is expected to continue to increase in the future.

关键词： visible light photocuring photoinitiator polymer biomedicine

Periodical shedding of cloud cavitation from a single hydrofoil in high-speed cryogenic channel flow

在线全文

学校读者我要写书评

暂无评论

Journal of Thermal Science 2009年第1期18卷 58-64页

作者： Yutaka ito Koichi SETO Takao NAGASAKI Tokyo Institute of Technology

In order to explain criteria for periodical shedding of the cloud cavitation, flow patterns of cavitation around a piano-convex hydrofoil were observed using a cryogenic cavitation tunnel of a blowdown type. Two hydrofoils of similarity of 20 and 60 mm in chord length with two test sections of 20 and 60 mm in width were prepared. Working fluids were water at ambient temperature, hot water and liquid nitrogen. The parameter range was varied between 0.3 and 1.4 for cavitation number, 9 and 17 m/sec for inlet flow velocity, and -8° and 8° for the flow incidence angle, respectively. At incidence angle 8°, that is, the convex surface being suction surface, periodical shedding of the whole cloud cavitation was observed on the convex surface under the specific condition with cavitation number and inlet flow velocity, respectively, 0.5, 9 m/sec for liquid nitrogen at 192℃ and 1.4, 11 m/sec for water at 88℃, whereas under the supercavitation condition, it was not observable. Periodical shedding of cloud cavitation occurs only in the case that there are both the adverse pressure gradient and the slow flow region on the hydrofoil.

关键词： cloud cavitation cryogen visualization hydrofoil

PHOTOCHROMISM AND LUMINESCENCE OF DOPANT CHROMOPHORES THROUGH TWO-PHOTON IONIZATION IN POLYMER FILMS

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Polymer Science 2001年第2期19卷 129-134页

作者： Masahide Yamamoto Hideo Ohkita Shinzaburo ito Faculty of Science and Engineering Ritsumeikan University Kusatsu Shiga 525-8577 JapanDepartment of Polymer Chemistry Graduate School of Engineering Kyoto University Sakyo Kyoto 606-8501 JapanDepartment of Polymer Chemistry Graduate School of Engineering Kyoto University Sakyo Kyoto 606-8501 Japan

Two-photon ionization and recombination processes of an aromatic chromophore doped in polymer films werestudied and the features of these processes were discussed in relation to photofunctional polymers, An aromatic moleculehaving low ionization potential, e.g., N,N,N',N'-tetramethyl-p-phenylene diamine doped in poly(methyl methacrylate)(PMMA) film was easily photoionized by intense laser ligh excitation, giving a colored radical cation (photochromism) anda trapped electron in PMMA matrix. As a reversed process, the radical cation recombined with the trapped electron, showingdiscoloration and emitting luminescence, either isothermal luminescence (ITL), or thermoluminescence (TL). In this report,ITL and TL through the charge recombination process were studied and the luminescence was suggested as a mean of the read-out of photorecording.

关键词： Two-photon ionization Photochromism Charge recombination Trapped electron Isothermal luminescence Thermoluminescence Aromatic amines Poly(methyl methacrylate)

Large Eddy Simulation of Methane Non-premixed Flame Using the Laminar Flamelet Model

在线全文

学校读者我要写书评

暂无评论

Journal of Thermal Science 2011年第6期20卷 534-542页

作者： Mari Mitani Yuta ito Nobuhiko Yamasaki Department of Aeronautics and Astronautics Kyushu University

The large eddy simulation (LES) using the steady laminar flamelet model is applied to a simple turbulent jet flame with 33.2% H2,22.1% CH4 and 44.7% N2 at the Reynolds number of 15,200 in order to validate the numerical methods and to investigate the flame *** the validation,the detailed experimental data of DLR-A flame is *** numerical results are in reasonable agreement with experimental results except mass fractions of minor *** the flow field,the break-down of the potential core,the vortex structure and the mixing intensity are well *** the combustion field,mass fractions of major species (H2O,CO2,CO) are well predicted *** species are well predicted *** the present study,the simulations conducted on the Cartesian and cylindrical grids with approximately 6.6× 10 5 nodes are compared.

关键词： Cartesian grid cylindrical grid validation calculation

Simple adaptive air-fuel ratio control of a port injection SI engine with a cylinder pressure sensor

在线全文

学校读者我要写书评

暂无评论

Control Theory and Technology 2015年第2期13卷 141-150页

作者： Chanyut KHAJORNTRAIDET Kazuhisa ito Graduate School of Engineering and Science Shibaura Institute of Technology Department of Machinery and Control Systems College of Systems Engineering and Science Shibaura Institute of Technology

The problem of air-fuel ratio(AFR) control of the port injection spark ignition(SI) engine is still of considerable importance because of stringent demands on emission control. In this paper, the static AFR calculation model based on in-cylinder pressure data and on the adaptive AFR control strategy is presented. The model utilises the intake manifold pressure, engine speed, total heat release, and the rapid burn angle, as input variables for the AFR computation. The combustion parameters, total heat release,and rapid burn angle, are calculated from in-cylinder pressure data. This proposed AFR model can be applied to the virtual lambda sensor for the feedback control system. In practical applications, simple adaptive control(SAC) is applied in conjunction with the AFR model for port-injected fuel control. The experimental results show that the proposed model can estimate the AFR, and the accuracy of the estimated value is applicable to the feedback control system. Additionally, the adaptive controller with the AFR model can be applied to regulate the AFR of the port injection SI engine.

关键词： Spark ignition engine in-cylinder pressure simple adaptive control air-fuel ratio estimation and control

Krein Parameters of Fiber-Commutative Coherent Configurations

在线全文

学校读者我要写书评

暂无评论

Algebra Colloquium 2020年第1期27卷 1-10页

作者： Keiji ito Akihiro Munemasa Research Center for Pure and Applied Mathematics Graduate School of Information SciencesTohoku UniversitySendaiJapan

For fiber-commutative coherent configurations,we show that Krein parameters can be defined essentially *** a consequence,the general Krein condition reduces to positive semidefiniteness of finitely many matrices determined by the parameters of a coherent *** mention its implications in the coherent configuration defined by a generalized *** also simplify the absolute bound using the matrices of Krein parameters.

关键词： coherent configuration association scheme Krein parameter Krein condition generalized quadrangle absolute bound