检索结果-南通市图书馆

Double-confined nanoheterostructure Sb/Sb_(2)S_(3)@Ti_(3)C_(2)T_(x)@C toward ultra-stable Li-/Na-ion batteries

Rare Metals 2024年第5期43卷 2067-2079页

作者： Dan Wang Qun Ma Huan He Zhi-Yuan Wang run-guo zheng Hong-Yu Sun Yan-guo Liu Chun-Li Liu School of Materials Science and Engineering Northeastern UniversityShenyang110819China School of Resources and Materials Northeastern University at QinhuangdaoQinhuangdao 066004China Key Laboratory of Dielectric and Electrolyte Functional Material Hebei Province Qinhuangdao 066004China Department of Physics and Oxide Research Center Hankuk University of Foreign StudiesYongin 17035Korea

Antimony-based materials with high capacities and moderate potentials are promising anodes for lithium-/-sodium-ion ***,their tremendous volume expansion and inferior conductivity lead to poor structural stability and sluggish reaction ***,a doubleconfined nanoheterostructure Sb/Sb_(2)S_(3)@Ti_(3)C_(2)T_(x)@C has been fabricated through a solvothermal method followed by low-temperature heat *** dual protection of“MXene”and“carbon”can better accommodate the volume expansion of Sb/Sb_(2)S_(3).The strong covalent bond(Ti-S,Ti-O-Sb,C-O-Sb)can firmly integrate Sb-based material with Ti_(3)C_(2)T_(x)and carbon,which significantly improves the structure *** addition,the carbon layer can restrain the oxidation of MXenes,and the nano-Sb/Sb_(2)S_(3)can facilitate electron/ion transport and suppress the restacking of *** heterogeneous interface between Sb and Sb_(2)S_(3)can further promote interfacial charge *** MXene-Sb/Sb_(2)S_(3)@C-1 with the optimal Sb content shows high specific capacities,comparable rate properties and ultra-stable cycling performances(250 m Ah·g^(-1)after 2500 cycles at 1 A·g^(-1)for sodium-ion batteries).Ex situ X-ray diffractometer(XRD)test reveals the storage mechanism including the conversion and alloying process of MXene-Sb/Sb_(2)S_(3)@*** voltammetry(CV)test results demonstrate that the pseudocapacitance behavior is dominant in MXene-Sb/Sb_(2)S_(3)@C-1,especially at large *** design paves the way for exploring high-performance alloy-based/conversion-type anode for energy storage devices.

关键词： Sb/Sb_(2)S_(3) MXene Carbon Anode Lithium-ion batteries Sodium-ion batteries

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A lithium–tin fluoride anode enabled by ionic/electronic conductive paths for garnet-based solid-state lithium metal batteries

引用

Rare Metals 2024年第2期43卷 575-587页

作者： Lei Zhang Qian-Kun Meng Xiang-Ping Feng Ming Shen Yu-Qing Zhang Quan-Chao Zhuang run-guo zheng Zhi-Yuan Wang Yan-Hua Cui Hong-Yu Sun Yan-guo Liu School of Materials Science and Engineering Northeastern UniversityShenyang110819China School of Resources and Materials Northeastern University at QinhuangdaoQinhuangdao066004China School of Materials and Physics China University of Mining&TechnologyXuzhou221116China Institute of Electronic Engineering China Academy of Engineering PhysicsMianyang621900China

The high energy density and stability of solid-state lithium metal batteries(SSLMBs)have garnered great ***-type oxides,especially Li_(6.4)La_(3)Zr_(1.4)Ta_(0.6)O_(12)(LLZTO),with high ionic conductivity,wide electrochemical window,and stability to Li metal anode,are promising solid-state electrolyte(SSEs)materials for ***,Li/LLZTO interface issues including high interface resistance,inhomogeneous Li deposition,and Li dendrite growth have hindered the practical application of ***,a multi-functional Li–SnF_(2) composite anode with Li,LiF,and Li-Sn alloy was specifically designed and *** composite anode improves the wettability to LLZTO,constructing an intimate contact interface between it and ***,ionic/electronic conductive paths in situ formed at the interface can effectively uniform Li deposition and suppress Li *** solid-state symmetric cell exhibits low interface resistance(11Ω·cm^(2)) and high critical current density(1.3 mA·cm^(−2))at 25℃.The full SSLMB based on LiFePO_(4) or LiNi_(0.5)Co_(0.2)Mn_(0.3)O_(2) cathode also shows stable cycling performance and high rate *** work provides a new composite anode strategy for achieving high-energy density and high-safety SSLMBs.

关键词： Solid-state lithium metal batteries(SSLMBs) Lithium-tin fluoride anode Ionic/electronic conductive Interface resistance Lithium dendrite

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Microstructure of Mg-8Zn-4Al-1Ca aged alloy

引用

Transactions of Nonferrous Metals Society of China 2014年第2期24卷 310-315页

作者：董允林小娉叶杰郑润国何娜东北大学材料与冶金学院沈阳110819

The microstructure of Mg-8Zn-4Al-1Ca aged alloy was investigated by TEM and HRTEM. The results show that the hardening produced in the Mg-8Zn-4Al-1Ca alloy is considerably higher than that in the Mg-8Zn-4A1 alloy. A dense dispersion of disc-like Ca2Mg6Zn3 precipitates are formed in Mg-8Zn-4Al-1Ca alloy aged at 160 ℃ for 16 h. In addition, the lattice distortions, honeycomb-looking Moir＆#233; fringes, edge dislocations and dislocation loop also exist in the microstructure. The precipitates of alloy aged at 160 ℃ for 48 h are coarse disc-like and fine dispersed grainy. When the alloy is subjected to aging at 160 ℃ for 227 h, the microstructure consists of numerous MgZn2 precipitates and Ca2Mg6Zn3 precipitates. All the analyses show that Ca is a particularly effective trace addition in improving the age-hardening and postponing the formation of MgZn2 precipitates in Mg-8Zn-4Al alloy aged at 160 ℃.

关键词： Mg-8Zn-4Al-1 Ca alloy age hardening Ca2Mg6Zn3 Moire fringe

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Defect Engineering with Rational Dopants Modulation for High‑Temperature Energy Harvesting in Lead‑Free Piezoceramics

引用

Nano-Micro Letters 2025年第3期17卷 87-101页

作者： Kaibiao Xi Jianzhe guo Mupeng zheng Mankang Zhu Yudong Hou Key Laboratory of Advanced Functional Materials Ministry of EducationCollege of Materials Science and EngineeringBeijing University of TechnologyBeijing 100124People’s Republic of China

High temperature piezoelectric energy harvester(HTPEH)is an important solution to replace chemical battery to achieve independent power supply of HT wireless ***,simultaneously excellent performances,including high figure of merit(FOM),insulation resistivity(ρ)and depolarization temperature(Td)are indispensable but hard to achieve in lead-free piezoceramics,especially operating at 250°C has not been reported ***,well-balanced performances are achieved in BiFeO3–BaTiO3 ceramics via innovative defect engineering with respect to delicate manganese *** to the synergistic effect of enhancing electrostrictive coefficient by polarization configuration optimization,regulating iron ion oxidation state by high valence manganese ion and stabilizing domain orientation by defect dipole,comprehensive excellent electrical performances(Td=340°C,ρ250°C>10^(7)Ωcm and FOM_(250°C)=4905×10^(–15)m^(2)N^(−1))are realized at the solid solubility limit of manganese *** HT-PEHs assembled using the rationally designed piezoceramic can allow for fast charging of commercial electrolytic capacitor at 250°C with high energy conversion efficiency(η=11.43%).These characteristics demonstrate that defect engineering tailored BF-BT can satisfy high-end HT-PEHs requirements,paving a new way in developing selfpowered wireless sensors working in HT environments.

关键词： Lead-free piezoceramic Defect engineering Dopants modulation High-temperature Piezoelectric energy harvester

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Synergistic effect of bonding heterogeneity and phonon localization in introducing excellent thermoelectric properties in layered heteroanionic NdZnSbO material

引用

Journal of Energy Chemistry 2025年第1期100卷 259-272页

作者： Da Wan Shuwei Tang Shulin Bai Xiaodong Li Peng Ai Wanrong guo Tuo zheng College of Materials Science and Engineering Liaoning Technical University Faculty of Chemistry Northeast Normal University

Layered rare-earth metal oxides, harnessing the dual properties of oxides and two-dimensional layered materials, exhibit remarkable thermal stability and quantum confinement effects. Therefore, this work adopts the first-principles calculation combined with the Boltzmann transport theory to predict the thermoelectric properties of NdZnSbO compound. The coexistence of weak interlayer van der Waals interactions, robust intralayer ionic bonding, and partial covalent bonding leads to remarkable bonding heterogeneity, which engenders pronounced phonon scattering and imposes constraints on thermal transport along the out-of-plane direction. The weakened chemical bonds induced by the antibonding states, together with the rattling-like behavior of the Zn atom, culminate in the profound anharmonicity in the layered NdZnSbO compound. The weakening bond and heavy element contribute to the softness of phonon modes, which significantly diminishes the phonon group velocity. The redistribution-dominated four-phonon scattering process spans a large optical gap, which effectively reduces the lattice thermal conductivity. The NdZnSbO compound exhibits direct semiconductor characteristic with a bandgap of 0.73 e V by adopting the Heyd-Scuseria-Ernzerhof(HSE06) functional in combination with spin–orbit coupling(SOC) effect. The multi-valley feature of NdZnSbO compound augur favorably for band degeneracy, thus amplifying the power factor. Consequently, an optimal figure-of-merit(ZT) of 3.40 at 900 K is achieved for the n-type NdZnSbO compound. The present study delves deeply insights into the origins for the low thermal conductivity of NdZnSbO compound and proposes an optimization scheme to enhance overall thermoelectric performance.

关键词： Bond strength (chemical)

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

A Verifiable Trust-Based CP-ABE Access Control Scheme for Cloud-Assisted Renewable Energy Systems

引用

Computers, Materials & Continua 2025年第1期82卷 1211-1232页

作者： Jiyu Zhang Kehe Wu Ruomeng Yan zheng Tian Yizhen Sun Yuxi Wu Yaogong guo Department of Control and Computer Engineering North China Electric Power UniversityBeijing102206China State Grid Information&Communication Company of Hunan Electric Power Corporation Changsha410118China State Grid Hunan Electric Power Corporation Chenzhou Power Supply Branch Chenzhou423000China

Renewable Energy Systems(RES)provide a sustainable solution to climate warming and environmental pollution by enhancing stability and reliability through status acquisition and analysis on cloud platforms and intelligent processing on edge servers(ES).However,securely distributing encrypted data stored in the cloud to terminals that meet decryption requirements has become a prominent research ***,managing attributes,including addition,deletion,and modification,is a crucial issue in the access control scheme for *** address these security concerns,a trust-based ciphertext-policy attribute-based encryption(CP-ABE)device access control scheme is proposed for RES(TB-CP-ABE).This scheme effectivelymanages the distribution and control of encrypted data on the cloud through robust attribute key *** introducing trust management mechanisms and outsourced decryption technology,the ES system can effectively assess and manage the trust worthiness of terminal devices,ensuring that only trusted devices can participate in data exchange and access sensitive ***,the ES system dynamically evaluates trust scores to set decryption trust thresholds,thereby regulating device data access permissions and enhancing the system’s *** validate the security of the proposed TB-CP-ABE against chosen plaintext attacks,a comprehensive formal security analysis is conducted using the widely accepted random oraclemodel under the decisional q-Bilinear Diffie-Hellman Exponent(q-BDHE)***,comparative analysis with other schemes demonstrates that the TB-CP-ABE scheme cuts energy/communication costs by 43%,and scaleswell with rising terminals,maintaining average latency below 50ms,ensuring real-time service *** proposed scheme not only provides newinsights for the secure management of RES but also lays a foundation for future secure energy solutions.

关键词： Access control renewable energy systems(RES) ciphertext-policy attribute-based encryption(CP-ABE) security

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nanograting‑Based Dynamic Structural Colors Using Heterogeneous Materials

引用

Nano-Micro Letters 2025年第3期17卷 138-151页

作者： Jingang Wang Haibo Yu Jianchen zheng Yuzhao Zhang Hongji guo Ye Qiu Xiaoduo Wang Yongliang Yang Lianqing Liu State Key Laboratory of Robotics Shenyang Institute of AutomationChinese Academy of SciencesShenyang 110016People’s Republic of China University of Chinese Academy of Sciences Beijing 100049People’s Republic of China

Dynamic structuralcolors can change in response todifferent environmental *** ability remains effectiveeven when the size of the speciesresponsible for the structural coloris reduced to a few micrometers,providing a promising sensingmechanism for solving microenvironmentalsensing problems inmicro-robotics and ***, the lack of dynamicstructural colors that can encoderapidly, easily integrate, and accuratelyreflect changes in physical quantities hinders their use in microscale sensing applications. Herein, we present a 2.5-dimensionaldynamic structural color based on nanogratings of heterogeneous materials, which were obtained by interweaving a pH-responsive hydrogelwith an IP-L photoresist. Transverse gratings printed with pH-responsive hydrogels elongated the period of longitudinal grating in the swollenstate, resulting in pH-tuned structural colors at a 45° incidence. Moreover, the patterned encoding and array printing of dynamic structuralcolors were achieved using grayscale stripe images to accurately encode the periods and heights of the nanogrid structures. Overall, dynamicstructural color networks exhibit promising potential for applications in information encryption and in situ sensing for microfluidic chips.

关键词： Dynamic structural colors Four-dimensional printing pH-responsive Nanogrid Heterogeneous materials

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Ammonia-induced CuO/13X for H_(2)S removal from simulated blast furnace gas at low temperature

引用

Green Energy & Environment 2025年第1期10卷 139-149页

作者： Erping Cao Yuhua zheng Hao Zhang Jianshan Wang Yuran Li Tingyu Zhu Zhan-guo Zhang Guangwen Xu Yanbin Cui State Key Laboratory of Mesoscience and Engineering Institute of Process EngineeringChinese Academy of SciencesBeijing100190China State Key Laboratory of Vanadium and Titanium Resources Comprehensive Utilization PanGang Group Research Institute Co.Ltd.Panzhihua Sichuan617000China Shenyang University of Chemical Technology Shenyang110142China University of Chinese Academy of Sciences Beijing 100049China

Blast furnace gas(BFG)is an important by-product energy for the iron and steel industry and has been widely used for heating or electricity ***,the undesirable contaminants in BFG(especially H_(2)S)generate harmful environmental *** desulfurization of BFG is urgent for integrated steel plants due to the stringent ultra-low emission *** with other desulfurization materials,zeolite-based adsorbents represent a viable option with low costs and long service *** this study,an ammonia-induced CuO modified 13X adsorbent(NH3–CuO/13X)was prepared for H_(2)S removal from simulated BFG at low *** XRD,H_(2)-TPR and TEM analysis proved that smaller CuO particles were formed and the dispersion of Cu on the surface of 13X zeolite was improved via the induction of *** on H_(2)S adsorption performance of the adsorbent was carried out using simulated BFG,and the results showed that NH3–CuO/13X-3 has better breakthrough sulfur capacity,which was more than twice the sulfur capacity of CuO/*** is proposed that the enhanced desulfurization performance of NH3–CuO/13X is attributed to an abundant pore of 13X,and combined action of 13X and *** work provided an effective way to improve the sulfur capacity of zeolite-based adsorbents via impregnation method by ammonia induction.

关键词： Blast furnace gas Desulfurization Ammonia-induced CuO 13X zeolite

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

乌江河岸带维管植物区系的初步研究

引用

武汉植物学研究 2010年第3期28卷 286-293页

作者：樊明策郭润正吴金清张守君郑重中国科学院武汉植物园武汉430074 中国科学院研究生院北京100049 中国科学院水生植物与流域生态重点实验室武汉430074 长江航务管理局疾病预防控制中心武汉430019

对乌江河岸带维管植物区系的研究结果表明,河岸带共有维管植物69科187属302种,其中蕨类植物9科10属16种,裸子植物1科1属1种,被子植物59科176属285种。生活型以草本为主,其次是灌木。科、属、种的分布区类型多样,在科级水平上有7个类型和... 详细信息

对乌江河岸带维管植物区系的研究结果表明,河岸带共有维管植物69科187属302种,其中蕨类植物9科10属16种,裸子植物1科1属1种,被子植物59科176属285种。生活型以草本为主,其次是灌木。科、属、种的分布区类型多样,在科级水平上有7个类型和4个变型,在属级水平上有13个类型和10个变型,在种级水平上有15个类型和13个变型。地理联系较为广泛,与北温带植物区系联系最为紧密,其次是泛热带植物区系和东亚植物区系。科、属的优势现象较为明显。该河岸带植物区系呈亚热带性质,与热带植物区系有较高的亲缘关系。

关键词：河岸带维管植物植物区系乌江

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Research on the deformation mechanism of flexural toppling deep-seated landslides based on large centrifuge physical model testing: A case study of the Genie landslide in the Tibetan Plateau

引用

Journal of Earth Science 2025年

作者： Shichao Cao Xiujun Dong Changbao guo Ruian Wu Zhihua Yang Guang zheng Xiaoqiang Zhu State Key Laboratory of Geohazard Prevention and Geoenvironment Protection， Chengdu University of Technology Institute of Geomechanics， Chinese Academy of Geological Sciences Key Laboratory of Active Tectonics and Geological Safety， Ministry of Natural Resources

Flexural toppling is a widespread failure mode in natural and excavated anti-inclined rock slopes of the eastern Tibetan Plateau， which can further evolve into large deep-seated landslides， posing significant threats to the construction and operation of important infrastructure. In this study， we took the large deep-seated Genie landslide as a case study and established a centrifuge physical model to analyze the deformation mechanism and evolutionary process of flexural toppling deep-seated landslides under the effect of gravity. The results indicate that the geomechanical mode of landslide instability is characterized by flexural toppling-shearing-sliding， with the deformation process could be divided into three stages: initial slow deformation stage marked by crack generation， rapid deformation stage characterized by the expansion and fracturing of cracks， and a low-speed deformation stage characterized by creep. Notably， the sliding surfaces do not adhere strictly to predefined bending zones but develop cracks along the bending parts， which gradually expand and penetrate deeper， eventually forming multiple potential sliding surfaces. The analysis of the entire process deformation evolution of flexural toppling deep-seated landslides suggests that the rapid deformation stage is the optimal time to take action for landslide prevention and control. The study demonstrates that the shear strength also plays a key factor in the evolution of flexural toppling. The research reveals the deformation mechanism and evolutionary process of large deep-seated landslides in deep-cut canyon areas， providing valuable reference for the prediction， assessment， and prevention of such slopes and landslides.

关键词：

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：