检索结果-南通市图书馆

Role of inter-particle collision on solids acceleration in riser

在线全文

学校读者我要写书评

暂无评论

Particuology 2010年第1期8卷 13-18页

作者： rajesh Patel Department of Mechanical Engineering New Jersey Institute of Technology

Collision among particles plays a significant role in governing the structure of gas-solids flow in a riser, especially in the dense and acceleration region. The inter-particle collision is the major cause not only for the kinetic energy dissipation （in terms of additional pressure drop beyond the solids hold-up） but also for the control of solids acceleration （in terms of a balancing force to prevent a free acceleration of solids）. A neglect of the balancing force of inter-particle collision against the hydrodynamic force in the solids momentum equation would simply overestimate the solids acceleration or concentration while underestimate the axial gradient of pressure along the riser by a large margin, typically by up to two orders of magnitude. This paper aims to illustrate the importance of the collision on the characteristic of the gas-solids riser flow. Our analysis shows that the collision force should be of the same order of magnitude as that of the drag force in the dense and acceleration region, which can be far beyond that of gravitational force on solids. A simple formulation of the collision force is therefore proposed to bear a similar format of drag force, with regard to the dependence upon local solids *** the inclusion of the proposed correlation of collision force in the solids momentum equation, our model would be able to yield reasonable phase distributions of gas-solid flows, which can be validated, in a bulk range, against available measurements of solids volume fraction and axial gradient of pressure.

关键词： Gas-solids flow Fluidization Solid acceleration Energy dissipation

Potential application of graphene oxide and Aspergillus niger spores with high adsorption capacity for recovery of europium from red phosphor,compact fluorescent lamp and simulated radioactive waste

在线全文

学校读者我要写书评

暂无评论

Journal of Rare Earths 2023年第1期41卷 157-166页

作者： B.Arunraj Vidya rajesh N.rajesh Department of Chemistry Birla Institute of Technology and Science-PilaniHyderabad CampusShameerpetHyderabad 500078India Department of Biological Sciences Birla Insttute of Technology and Science-PilaniHyderabad CampusShameerpetHyderabad 500078India

The recovery of rare earth elements(REEs) is a global challenge and the mining of rare earths has serious environmental implications due to the toxic waste released post ***,the rising demand for rare earths and their far reaching electronic applications necessitates an effective strategy to recover the REEs from more viable *** this work,the graphene oxide-Aspergillus niger spores(*** spores) blend was utilized for adsorptive recovery of a precious rare earth Eu(Ⅲ) and the adsorption variables like pH of the medium,adsorbent dosage,sorption kinetics,thermodynamics,and isotherm were optimized for the developed bioso *** adsorption process suits the Langmuir isotherm model with a maximum adsorption capacity of 147.3 mg/*** pseudo-second-order kinetics is a perfect fit to describe the adsorption *** results obtained through the Van’t Hoff plot show negative free energy change(ΔG^(0)) which implies the spontaneity of the adsorption *** negative standard enthalpy change(ΔH^(0)) values show that the nature of the adsorption process is *** analytical characterizations including Fourier transform infrared spectroscopy(FTIR),Raman,X-ray diffraction(XRD),X-ray photoelectron spectroscopy(XPS),Brunauer-Emmett-Teller(BET),thermal gravimetric analysis(TGA),and scanning electron microscopy-energy dispersive X-ray spectroscopy(SEM-EDX) were employed to study the *** features of *** spores biosorbent were applied to recover Eu(Ⅲ) from real samples such as fluorescent lamp phosphor,red phosphor powder,and a simulated radioactive waste solution.

关键词： Europium Graphene oxide Aspergillus niger Phosphor Radioactive waste Rare earths

A review on the current research on microwave processing techniques applied to graphene-based supercapacitor electrodes:An emerging approach beyond conventional heating

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2022年第11期31卷 252-282,I0008页

作者： rajesh Kumar Sumanta Sahoo Ednan Joanni rajesh Kumar Singh Department of Mechanical Engineering Indian Institute of TechnologyKanpur 208016Uttar PradeshIndia School of Chemical Engineering Yeungnam UniversityGyeongsanGyeongbuk 38541Republic of Korea Centre for Information Technology Renato Archer(CTI) Campinas 13069-901Brazil School of Physical and Material Sciences Central University of Himachal Pradesh(CUHP)KangraDharamshala 176215HPIndia

The various methods for microwave processing of materials exhibit numerous advantages,such as short processing times,high yield,expanded reaction conditions,high reproducibility,and high purity of ***-assisted synthesis strategies have been widely adopted for the preparation of highperformance graphene-based materials for supercapacitor *** oxides,mixed metal oxides,metal hydroxides,layered double hydroxides,carbon nanotubes and conducting polymers are some of the main materials which have been added to graphene derivatives for advanced composite/hybrid *** review article first provides a brief introduction and an overview of microwave heating and its advantages for processing graphene-based electrode *** that,a systematic survey of recently published research on microwave irradiation-assisted processing is presented,focusing on:(i)transformation of graphite/graphite oxide into graphene/graphene oxide by exfoliation and reduction;(ii)formation of graphene derivatives in various liquid and gaseous media;(iii)modification of graphene derivatives with various metal oxides/hydroxides,carbon nanotubes,and conducting polymers for use in *** challenges and future perspectives for microwave-assisted processing of graphene-based materials for cutting-edge supercapacitor electrode applications are also summarized in the conclusion.

关键词： Microwave irradiation Graphene derivatives Reduction/Exfoliation Supercapacitor Energy

Trajectory predictions of new lift separation sabots

在线全文

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2021年第4期17卷 1361-1373页

作者： Sreelal Mohanan rajesh G Department of Aerospace Engineering Indian Institute of Technology MadrasChennaiTamilnadu600036India

This paper presents a modified analytical model to evaluate the trajectories of various lift separation sabot *** aerodynamic forces acting on the sabot surfaces during a supersonic flight are modeled in the present analytical model by incorporating the pressures on the windward side of the sabot due to the detached/attached shock and its reflections and then integrated using the 3-DoF dynamical *** trajectory and the aerodynamic coefficients were obtained for these configurations at a projectile Mach number of *** sabot configurations,which include two new designs,are compared with each other and with the conventional free flight trajectory data of the conventional *** mechanical interaction between the sabot and projectile is also addressed in the present *** comparison shows that the new designs with the aerodynamic surfaces close to the center of gravity,lift-off from the projectile with minimal mechanical interaction compared to a conventional sabot.

关键词： Lift separation Sabot Trajectory Shock reflection

Performance analysis of combined cycle power plant

在线全文

学校读者我要写书评

暂无评论

Frontiers in Energy 2015年第4期9卷 371-386页

作者： Nikhil DEV rajesh ATTRI Department of Mechanical Engineering YMCA University of Science and Technology Faridabad 121006 India

Combined cycle power plants （CCPPs） are in operation with diverse thermodynamic cycle configura- tions. Assortment of thermodynamic cycle for scrupulous locality is dependent on the type of fuel available and different utilities obtained from the plant. In the present paper, seven of the practically applicable configurations of CCPP are taken into consideration. Exergetic and energetic analysis of each component of the seven configurations is conducted with the help of computer programming tool, i.e., engineering equation solver （EES） at different pressure ratios. For Case 7, the effects of pressure ratio, turbine inlet temperature and ambient relative humidity on the first and second law is studied. The thermodynamics analysis indicates that the exergy destruction in various components of the combined cycle is significantly affected by the overall pressure ratio, turbine inlet temperature and pressure loss in air filter and less affected by the ambient relative humidity.

关键词： first-law second-law exergy destruction,components

Mechanical Properties of Natural Fiber Braided Yarn Woven Composite： Comparison with Conventional Yarn Woven Composite

在线全文

学校读者我要写书评

暂无评论

Journal of Bionic Engineering 2017年第1期14卷 141-150页

作者： Murugan rajesh Jeyaraj Pitchaimani Department of Mechanical Engineering National Institute of Technology Karnataka Surathkal Mangalore India 575 025

The effect of reinforcing natural fiber in the form of braided yarn woven fabric on mechanical properties of polymer composite was investigated. The results of braided yarn fabric composites were compared with the conventional yarn fabric composite and random oriented intimately mixed short fiber composites for the same percentage of fiber weight. The effect of intra-ply hybridization, by keeping two different natural fiber yams along two different directions of a woven fabric, on mechanical properties of the woven fabric composite was also analyzed. Natural fiber braided yarn fabric reinforcement significantly increased the mechanical properties of the composites compared with that of the conventional woven fabric and short fiber reinforcements. Intra-ply hybridization of two different natural fibers improved the mechanical properties of the conventional woven fabric composite while it could not enhance the properties of the braided fabric composite. The improvement in impact property is very high compared to tensile and flexural properties due to the braided yarn fabric reinforcement.

关键词： braided yarn fabric natural fiber mechanical properties

Deep insights into the advancements and applications of perovskite based photovoltaic cells

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2018年第3期27卷 753-763页

作者： Chandni Devi rajesh Mehra Electronics and Communication Department NITTTR

The organometal halide perovskite materials have a blend of surprising optoelectronic properties, for example high value of absorption coefficient and abrupt optical retention edge, lifetime, long charge carrier diffusion length and many more. Brought in conjunction with the capacity for manufacturing at low temperature, likewise from the solution, devices based on perovskite, particularly solar cells have been contemplated seriously with striking advancements in performance, in the course of recent years. The amalgamation of minimal effort, high efficiency and extra applications gives incredible potential to commercialization of these cells. The applications and performance of perovskite cells frequently relate with the structures of the device. Numerous creative structures of the devices were produced, targeting for vast scale manufacture, diminishing creation cost, upgrading the PCE and subsequently expanding the prospective for future applications. This paper outlines the various advanced structures of PSC, challenges confronted by these PSCs and their future perspectives. The commercial applications of PSC are additionally talked about in this paper.

关键词： Solar cells Flexibility ETM Perovskite HTM Structures

Experimental investigation for machinability aspects of graphene oxide/carbon fiber reinforced polymer nanocomposites and predictive modeling using hybrid approach

在线全文

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2021年第5期17卷 1671-1686页

作者： Jogendra Kumar rajesh Kumar Verma Department of Mechanical Engineering Madan Mohan Malaviya University of TechnologyGorakhpur273010India

This article explores the drilling behavior of polymer nanocomposites reinforced by Graphene oxide/Carbon fiber using a hybrid method of Grey theory and Principal component analysis(GR-PCA).An online digital dynamometer was employed for the evaluation of Thrust Force and *** image processing technique computes the *** surface methodology(RSM)considers the parameters,namely,drilling speed(S),feed rate(F),Graphene Oxide wt.%(G)in designing the experimentation *** component analysis(PCA)was used to tackle the response priority weight during the combination of multiple *** of variance(ANOVA)scrutinized the influence of parameters and intended the regression models to predict the ***-PCA evaluated the optimal parametric setting and remarked that feed rate acts as the most predominant *** higher feed rate and wt.%of G is responsible for surface damages like fiber pull-out,fiber fracture and cracks.A significant improvement in drilling responses has been obtained and also validates through confirmatory test and microstructure investigations.

关键词： Graphene oxide Polymer Carbon fiber RSM ANOVA GR-PCA

Sacred groves of India:repositories of a rich heritage and tools for biodiversity conservation

在线全文

学校读者我要写书评

暂无评论

Journal of Forestry Research 2021年第3期32卷 899-916页

作者： Sakshi Sharma rajesh Kumar Department of Botany DAV CollegeAmritsarPunjab 143001India DAV College AmritsarPunjab 143001India

Sacred groves preserve a rich religious and socio-cultural heritage of Indian biodiversity from primeval times,due to their *** act as a bridge between man and *** help to improve soil quality,replenish water resources and are pivotal for biodiversity conservation of plants and animals including rare,endemic,threatened,vulnerable species and ethnobotanical *** of India's sacred groves are associated with a deity or a spiritual being,who protects the grove and local *** cover of these groves has traditional ethnobotanical value,especially in the field of ethnomedicine,which accounts for the conservation of groves over the *** plant species from sacred groves are used according to tradition and culture to prevent or cure various health ***,modernisation,industrialisation,increased encroachment and misuse of forest resources increasingly threaten sacred *** treasures of nature must be conserved by formulating and applying new laws and policies while creating awareness among people about the value of sacred *** this aim,we review the distribution,ecological and socio-cultural significance of sacred groves of India and strategies to conserve them.

关键词： Biodiversity Conservation Endemic Ethnobotany Ethnomedicine