检索结果-南通市图书馆

Chiral forces in longitudinally invariant dielectric photonic waveguides

在线全文

学校读者我要写书评

暂无评论

Photonics Research 2024年第3期12卷 431-443页

作者： jOSEP martÍnEZ-ROMEU IAGO DIEZ SEBASTIAn GOlAT FRAnCISCO j.RODRÍGUEZ-FORTUÑO AlEjAnDRO martÍnEZ nanophotonics Technology Center Universitat Politècnica de ValènciaValencia 46022Spain Department of Physics King’s College LondonLondon WC2R 2LSUK

We calculate numerically the optical chiral forces in rectangular cross-section dielectric waveguides for potential enantiomer *** study considers force strength and time needed for separating chiral nanoparticles,mainly via quasi-TE guided modes at short wavelengths(405 nm)and the 90°-phase-shifted combination of quasi-TE and quasi-TM modes at longer wavelengths(1310 nm).Particle tracking simulations show successful enantiomer separation within two *** results suggest the feasibility of enantiomeric separation of nanoparticles displaying sufficient chirality using simple silicon photonic integrated circuits,with wavelength selection based on the nanoparticle size.

关键词： dielectric forces quasi

Plant cell wall-mediated disease resistance:Current understanding and future perspectives

在线全文

学校读者我要写书评

暂无评论

Molecular Plant 2024年第5期17卷 699-724页

作者： Antonio Molina lucıa jorda Miguel Angel Torres Marina martın-Dacal Diego jose Berlanga Patricia Fernandez-Calvo Elena Gomez-Rubio Sonsoles martın-Santamarıa Centro de Biotecnología y Genómica de Plantas Universidad Politécnica de Madrid(UPM)-Instituto Nacional de Investigación y Tecnología Agraria y Alimentaria(INIA/CSIC)Campus de Montegancedo UPMPozuelo de Alarcon(Madrid)Spain Departamento de Biotecnologıa-Biología Vegetal Escuela Técnica Superior de Ingenierıa AgronomicaAlimentarıa y de BiosistemasUPMMadridSpain Centro de Investigaciones Biologicas Margarita Salas Consejo Superior de Investigaciones Científicas(CSIC)Ramiro de Maeztu 928040 MadridSpain Misión Biológica de Galicia Consejo Superior de Investigaciones Científicas(CSIC)Campus de Montegancedo UPMPozuelo de Alarcón(Madrid)Spain

Beyond their function as structural barriers,plant cell walls are essential elements for the adaptation of plants to environmental *** walls are dynamic structures whose composition and integrity can be altered in response to environmental challenges and developmental *** wall changes are perceived by plant sensors/receptors to trigger adaptative responses during development and upon stress *** cell wall damage caused by pathogen infection,wounding,or other stresses leads to the release of wall molecules,such as carbohydrates(glycans),that function as damage-associated molecular patterns(DAMPs).DAMPs are perceived by the extracellular ectodomains(ECDs)of pattern recognition receptors(PRRs)to activate pattern-triggered immunity(PTI)and disease ***,glycans released from the walls and extracellular layers of microorganisms interacting with plants are recognized as microbe-associated molecular patterns(MAMPs)by specific ECD-PRRs triggering PTI *** number of oligosaccharides DAMPs/MAMPs identified that are perceived by plants has increased in recent ***,the structural mechanisms underlying glycan recognition by plant PRRs remain ***,this knowledge is mainly focused on receptors of the lysM-PRR family,which are involved in the perception of various molecules,such as chitooligosaccharides from fungi and lipo-chitooligosaccharides(i.e.,nod/MYC factors from bacteria and mycorrhiza,respectively)that trigger differential physiological ***,additional families of plant PRRs have recently been implicated in oligosaccharide/polysaccharide *** include receptor kinases(RKs)with leucine-rich repeat and Malectin domains in their ECDs(lRR-MAl RKs),Catharanthus roseus RECEPTOR-lIKE KInASE 1-lIKE group(CrRlK1l)with Malectin-like domains in their ECDs,as well as wall-associated kinases,lectin-RKs,and *** characterization of structural basis of glycans recogniti

关键词： Arabidopsis thaliana cell wall damage-associated molecular patterns DAMPs disease resistance glycans oligosaccharides pattern-triggered immunity PTl pattern recognition receptor PRRs

CO oxidation under lean and stoichiometric conditions over ceriazirconia with very low metal contents(Cu,Co,Ag and Pt)

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

journal of Rare Earths 2024年第9期42卷 1669-1681,I0002页

作者： j.C.martínez-Munuera M.P.Yeste A.García-García MCMA Group Department of Inorganic Chemistry and Institute of MaterialsUniversity of AlicanteCarretera de San Vicente del Raspeig s/n03690San Vicente del RaspeigAlicanteSpain Solid Chemistry and Catalysis Group Department of Materials ScienceMetallurgic Engineering and Inorganic ChemistryInstitute of Electronic Microscopy and Materials ResearchUniversity of CádizAp.40E-11510Puerto RealCádizSpain

In this work,several ceria-zirconia based catalysts with very lo w(and equimolar) metal contents were prepared,characterised and tested for the CO oxidatio n reaction(under lean and stoichiometric conditions),trying to emulate those conditions found in a diesel oxidation catalyst(DOC) system from a diesel engine and those encountered under gasoline exhaust(λ=1).The metals chosen are Cu,Co,Ag and Pt(as a reliable benchmark).The results reveal enormous differences among reducibility and catalytic activity despite quite similar structural and textural properties of the catalysts,showing differences among dispersion(Ag-catalyst seems to present a low level of dispersion).This catalyst seems to be characterised,as well,by a strong electronic interaction between Ce and Ag centres which is suggested to yield an improved reducibility under H_(2)-TPR ***,the order in catalytic activity(Cu>Ag>Co≈Pt>>support) seems not to follow the order found in reducibility and the Cu-catalyst seems to be the most active independently on the reaction conditions,yielding nearly overlapped CO oxidation catalytic *** restingly,a stro ng correlation between the catalytic activity under the two conditions tested and the OSC values of the Ce_(0.8)Zr_(0.2)O_(2)-supported metal catalysts is ***,OSC parameter measured at 150℃ can be used as a relevant descriptor to evaluate the CO oxidation activity at low and medium conversions for the investigated catalysts,much better than the H_(2)-TPR measurements.

关键词： CO oxidation low metal content Ceria-zirconia Copper species OSC parameter Rare earths

A multi-shot target wheel assembly for high-repetition-rate, laser-driven proton acceleration

在线全文

学校读者我要写书评

暂无评论

High Power laser Science and Engineering 2024年第2期 91-98页

作者： j.Pe?as A.Bembibre D.Cortina-Gil l.martín A.Reija C.Ruiz M.Seimetz A.Alejo j.Benlliure Instituto Galego de Física de Altas Enerxías Universidade de Santiago de Compostela laboratorio láser de Aceleración y Aplicaciones RIAIDT Universidade de Santiago de Compostela Instituto Universitario de Física Fundamental y Matemáticas y Dpto.de Didáctica de la Matemática y de las Ciencias Experimentales Universidad de Salamanca Instituto de Instrumentación para Imagen Molecular (I3M) CSIC-Universitat Politècnica de València

A multi-shot target assembly and automatic alignment procedure for laser–plasma proton acceleration at high repetition rate are introduced. The assembly is based on a multi-target rotating wheel capable of hosting more than 5000 targets,mounted on a 3D motorized stage to allow rapid replenishment and alignment of the target material between laser irradiations. The automatic alignment procedure consists of a detailed mapping of the impact positions at the target surface prior to the irradiation that ensures stable operation of the target, which alongside the purpose-built design of the target wheel, enables operation at rates up to 10 Hz. Stable and continuous laser-driven proton acceleration at 10 Hz is demonstrated, with observed cut-off energy stability about 15%.

关键词：

Vertical Displacement Measurement in a Slow-Moving Sinkhole Using BOTDA

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Photonic Sensors 2024年第1期14卷 23-39页

作者： Pascual SEVIllAnO javier PRECIADO-GARBAYO jorge SEVIl Francisco GUTIERREZ juan jmartinEZ Sonia martin-lOPEZ Miguel GOnZAlEZ-HERRAEZ Aragon Institute of Engineering Research(I3A) Universidad de ZaragozaZaragoza 50018Spain Electronic Enginering and Communicaton Dpartment EINAUniversidad de ZaragzaZaragza 50018Spain Aragon Photonics labs. Zaragoza 50009Spain Department of Earth Sciences Universidad de ZaragozaZaragoza 50009Spain Department of Electronics Escuela Politecnica SuperiorUniversidad de AlcalaMadrid 28805Spain

The effectiveness of monitoring and early-warning systems for ground deformation phenomena,such as sinkholes,depends on their ability to accurately resolve the ongoing ground displacement and detect the subtle deformation preceding catastrophic *** sinkholes with a slow subsidence rate and diffuse edges pose a significant challenge for subsidence monitoring due to the low deformation rates and limited lateral strain *** this work,we satisfactorily illustrate the practicality of the Brillouin optical time domain analysis(BOTDA)to measure the spatial-temporal patterns of the vertical displacement in such challenging slow-moving sagging *** assess the performance of the approach,we compare the strain recorded by the distributed optical fiber sensor with the vertical displacement measured by high-precision *** results show a good spatial correlation with the ability to identify the maximum subsidence *** is also a good temporal correlation with the detection of an acceleration phase in the subsidence associated with a flood event.

关键词： Distributed fiber optic sensing(DFOS) vertical displacement measurement slow subsidence rate sinkhole hazard early-warning system

A multi-shot target wheel assembly for high-repetition-rate, laser-driven proton acceleration

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

High Power laser Science and Engineering 2024年第2期12卷 87-94页

作者： j.Penas A.Bembibre D.Cortina-Gil l.martin A.Reija C.Ruiz M.Seimetz A.Alejo j.Benlliure Instituto Galego de Fisica de Altas Enerxias Universidade de Santiago de CompostelaSantiago de CompostelaSpain laboratorio laser de Aceleracion y Aplicaciones RIAIDTUniversidade de Santiago de CompostelaSantiago de CompostelaSpain Instituto Universitario de Física Fundamental y Matematicas y Dpto.de Didactica de la Matematica y de las Ciencias Experimentales Universidad de SalamancaSalamancaSpain Instituto de Instrumentación para Imagen Molecular(I3M) CSIC-Universitat Politecnica de ValenciaValenciaSpain

A multi-shot target assembly and automatic alignment procedure for laser–plasma proton acceleration at high repetition rate are *** assembly is based on a multi-target rotating wheel capable of hosting more than 5000 targets,mounted on a 3D motorized stage to allow rapid replenishment and alignment of the target material between laser *** automatic alignment procedure consists of a detailed mapping of the impact positions at the target surface prior to the irradiation that ensures stable operation of the target,which alongside the purpose-built design of the target wheel,enables operation at rates up to 10 *** and continuous laser-driven proton acceleration at 10 Hz is demonstrated,with observed cut-off energy stability about 15%.

关键词： high repetition rate laser-plasma acceleration multi-shot operation proton source target assembly

Solid-liquid extraction for yttrium recovery using porous polymeric resin(XAD-7) functionalized with D_(2)EHPA

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

journal of Rare Earths 2024年第9期42卷 1764-1773,I0005页

作者： P.A.martínez-Montoya R.G.Sanchez-Alvarado D.Y.Medina-Velazquez M.l.Carrera-jota P.Garnica-Chávez A.de j.Morales-Ramirez Higher School of Chemical Engineering and Extractive Industries ESIQIEIPNDepartment of Metallurgical EngineeringUPALM S/NCol.LindavistaGustavo A.Madero Cd.de MéxicoC.P07738Mexico Metropolitan Autonomous University Department of MaterialsBasic Sciences and EngineeringAv.San Pablo No.180Col.Reynosa TamaulipasCd.de MéxicoC.P02200Mexico Center for Research and Technological Innovation CIITECIPNCda.de CECATIs/nSanta CatarinaAzcapotzalcoC.P02250CDMXMexico

The recovery of yttrium is proposed by applying a solid-liquid extraction process using di-2-ethyl hexylphosphoric acid(D2EHPA) as extracting *** extracting agents were supported on a macro porous polymeric resin XAD-7(solid phase).Yttrium ions extraction and discharge tests were performed,firstly from a synthetic aqueous solution of 100 mg/l Y(liquid phase) at 25℃ with *** effects of pH of aqueous solutions bearing yttrium,volume fraction of extracting agents and the solid/liquid(S/l)ratio on the yttrium recovery were *** most favorable conditions for yttrium ions extraction are;20 vol% D_(2)EHPA functionalized resin,pH=1.5 and an S/l ratio of 10 mg/ml The discharge of yttrium ions was done under the same conditions of extraction stage,using a 2 mol/l [H_(2)SO_(4)] as stripping *** to 80% yttrium is extracted,while 75% yttrium is recovered in the striping *** all experiments,the reaction equilibrium is reached after 20 min,and the kinetics for the extraction stage was determined as a second-order ***,experiments were carried out to discharge the yttriumloaded resins,and it has been determined that the best pH value to strip the Y ions is *** tests of extraction and discharge for yttrium ions show that the functionalized resin can work at least five cycles without decreasing its ***,the proposed process was tested in a real solution with Y ions fro m a waste fluorescent la mp powder leached in H_(2)SO_(4),demonstrating the ability to effectively recover yttrium,separating it from various metals from the studied residue.

关键词： Yttrium recovery Rare earth solid-liquid extraction XAD-7 resin Fluorescent lamps recycling Solid-liquid kinetics extraction

Single atom Cu-n-C catalysts for the electro-reduction of CO_(2) to CO assessed by rotating ring-disc electrode

在线全文

学校读者我要写书评

暂无评论

journal of Energy Chemistry 2024年第1期88卷 169-182,I0004页

作者： S.Pérez-Rodríguez M.Gutiérrez-Roa C.Giménez-Rubio D.Ríos-Ruiz P.Arévalo-Cid M.V.martínez-Huerta A.Zitolo M.j.lázaro D.Sebastián Instituto de Carboquímica(CSIC) Miguel Luesma Castán 450018 ZaragozaSpain Instituto de Catálisis y Petroleoquímica(CSIC) Marie Curie 228049 MadridSpain Synchrotron SOlEIl L’Orme des MerisiersDépartementale 12891190France

The electrochemical CO_(2) reduction reaction(CO_(2)RR) to controllable chemicals is considered as a promising pathway to store intermittent renewable energy. Herein, a set of catalysts based on copper-nitrogendoped carbon xerogel(Cu-n-C) are successfully developed varying the copper amount and the nature of the copper precursor, for the efficient CO_(2)RR. The electrocatalytic performance of Cu-n-C materials is assessed by a rotating ring-disc electrode(RRDE), technique still rarely explored for CO_(2)RR. For comparison, products are also characterized by online gas chromatography in a H-cell. The as-synthesized Cu-nC catalysts are found to be active and highly CO selective at low overpotentials(from -0.6 to -0.8 V ***) in 0.1 M KHCO_(3), while H_(2) from the competitive water reduction appears at larger overpotentials(-0.9 V vs. RHE). The optimum copper acetate-derived catalyst containing Cu-n_(4) moieties exhibits a CO_(2)-to-CO turnover frequency of 997 h^(-1) at -0.9 V vs. RHE with a H_(2)/CO ratio of 1.8. These results demonstrate that RRDE configuration can be used as a feasible approach for identifying electrolysis products from CO_(2)RR.

关键词： Cu-n-C Carbon xerogel Rotating ring disc electrode Carbon dioxide reduction reaction Carbon monoxide

Europium recovery process by means of polymeric nanoparticles functionalized with acrylic acid,curcumin and fumaramide

在线全文

学校读者我要写书评

暂无评论

journal of Rare Earths 2024年第10期42卷 1950-1959页

作者： P.A.martínez-Montoya j.M.del Río A.de j.Morales-Ramirez M.Corea Escuela Superior de Ingeniería Química e Industrias Extractivas ESIQIE-IPNDepartamento de Ingeniería Metalúrgica UPALM S/N Col.Lindavista Escuela Superior de Ingenieria Química e Industrias Extractivas ESIQIE-IPNLaboratorio de Investigación en Polímeros y NanomaterialesUPALM S/N Col.Lindavista Centra de Investigación e Innovación Tecnológica CIITEC-IPNCda.de CECATIs/n

Polymeric nanoparticles of poly(methyl methacrylate) were obtained by emulsion polymerization techniques in a proce ss of two *** particles were functionalized with acrylic acid,curcumin,and fumaramide and three series of polymeric particles were *** incorporation of functional groups was confirmed by Fourier transform-infrared spectrosocopy(FT-IR) and ultraviolet-visible(UV-Vis) *** spherical morphology of particles with an average diameter of 100 nm was observed by scartning electron microscopy(SEM).The polymeric materials were used for recovery of [Eu]from synthetic *** nanoparticles show excellent chelation capacity to trap rare-earth ions,because they recover more than 85% of [Eu] at pH of *** images of SEM after extraction process show arrays between particles with larger average particle sizes to 1.5 *** addition,the particles have a good stripping capacity,exceeding 50% of it,maintaining their homogeneity in morphology and good stability in dispersion for the recovery and stripping processes.A pseudo-second model order is obtained for the extraction and stripping processes while the best results of stripping process are obtained at pH of6.

关键词： [Eu] recovery Chelating effect Extraction process Stripping process Emulsion polymerization Rare earths