检索结果-南通市图书馆

Aerodynamics of a Tandem-Bladed Axial Compressor rotor under Circumferential Distortion at Different rotational Speeds

在线全文

学校读者我要写书评

暂无评论

Journal of Thermal Science 2024年第4期33卷 1340-1356页

作者： Amit KUMAr Jerry T.JOHN A.M.PrADEEP r.A.DAKKErMANS Dragan KOZULOVIC Department of Aerospace Engineering Indian Institute of Technology BombayMumbai400076India Department of Automotive and Aeronautical Engineering Hamburg University of Applied Sciences20099HamburgGermany Institute of Jet Propulsion Bundeswehr University Munich85577NeubibergGermany

For most aircraft engines,inflow distortion is *** distortion is known to degrade the aerodynamic performance and stable operating limits of a *** rotor configuration is an arrangement that effectively controls the growth of the boundary layer over the suction surface of the ***,a higher total pressure rise can be achieved through this unconventional design approach involving the splitting of the blade into forward and aft *** is expected that the effect of inlet flow distortion would be more severe for a tandem-rotor design due to the greater flow turning inherent in such ***,this aspect needs to be thoroughly *** present study discusses the effect of circumferential distortion on the tandem-rotor at different rotational ***-annulus rANS simulations using ANSYS CFX are used in the present *** performance of the rotor at a particular flow coefficient and different rotational speeds is *** total pressure and efficiency are observed to drop at lower mass flow rates under the influence of circumferential *** loss region in each blade passage is mainly associated with the blade wake,tip leakage vortex,secondary flow,and boundary ***,their contribution varies from passage to passage,particularly in the distorted *** the lower span,the wake width is found to be higher than that at a higher *** to the redistribution of the mass flow,the circumferential extent reduces at a higher *** the undistorted sector,the strength of the tip leakage vortex is significantly higher at the design rotational speed than at lower *** distortion near the tip region promotes an early vortex breakdown even at the design operating *** adversely affects the total pressure,efficiency,and stall *** clean flow conditions,this phenomenon is only observed near the stall *** the design operating condition,the breakdown of the forward rotor tip l

关键词： tandem rotor circumferential distortion loss tip leakage vortex vortex breakdown diffusion factor aerodynamics of compressor blade

Automatic area estimation of algal blooms in water bodies from UAV images using texture analysis

在线全文

学校读者我要写书评

暂无评论

Water Science and Engineering 2024年第1期17卷 62-71页

作者： Ajmeria rahul Gundu Lokesh Siddhartha Goswami r.N.Ponnalagu radhika Sudha Department of Electrical and Electronics Engineering Birla Institute of Technology&SciencePilani Hyderabad CampusTelangana 500078India

Algal blooms,the spread of algae on the surface of water bodies,have adverse effects not only on aquatic ecosystems but also on human *** adverse effects of harmful algal blooms(HABs)necessitate a convenient solution for detection and *** aerial vehicles(UAVs)have recently emerged as a tool for algal bloom detection,efficiently providing on-demand images at high spatiotemporal *** study developed an image processing method for algal bloom area estimation from the aerial images(obtained from the internet)captured using *** a remote sensing method of HAB detection,analysis,and monitoring,a combination of histogram and texture analyses was used to efficiently estimate the area of *** features like entropy(using the Kullback-Leibler method)were emphasized with the aid of a gray-level co-occurrence *** results showed that the orthogonal images demonstrated fewer errors,and the morphological filter best detected algal blooms in real time,with a precision of 80%.This study provided efficient image processing approaches using on-board UAVs for HAB monitoring.

关键词： Algal bloom Image processing Texture analysis Histogram analysis Unmanned aerial vehicles

Liver transplantation as an alternative for the treatment of intrahepatic cholangiocarcinoma: Past, present, and future directions

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Hepatobiliary & Pancreatic Diseases International 2024年第2期23卷 129-138页

作者： Sudha Kodali Ashton A Connor Souhail Thabet Elizabeth W Brombosz r Mark Ghobrial Sherrie and Alan Conover Center for Liver Disease and Transplantation Houston Methodist HospitalHoustonTX 77030USA JC Walter Jr Transplant Center Houston Methodist HospitalHoustonTX 77030USA Department of Medicine Weill Cornell Medical CollegeNew YorkNYUSA Department of Surgery Houston Methodist HospitalHoustonTX 77030USA Department of Surgery Weill Cornell Medical CollegeNew YorkNYUSA School of Medicine New Giza UniversityGizaEgypt

Intrahepatic cholangiocarcinoma(iCCA)is a rare biliary tract cancer with high mortality *** resection of the iCCA lesion is the first choice of treatment,with good prognosis after margin-negative ***,only 12%-40% of patients are eligible for resection at presentation due to cirrhosis,portal hypertension,or large tumor *** transplantation(LT)offers margin-negative iCCA extirpation for patients with unresectable ***,iCCA was a contraindication for LT until size-based selection criteria were introduced to identify patients with satisfied post-LT *** studies have shown that tumor biology-based selection can yield high post-LT survival in patients with locally advanced *** selection criterion is the tumor response to neoadjuvant *** with response to neoadjuvant therapy have better outcomes after LT compared with those without tumor response to neoadjuvant *** index that helps predict the treatment outcome is the *** survival outcomes have also opened the door for living donor LT for *** undergoing LT for iCCA now have statistically similar survival rates as patients undergoing *** combination of surgery and locoregional and systemic therapies improves the prognosis of iCCA patients.

关键词： Liver transplantation Cholangiocarcinoma Hepatectomy Transplant oncology Liver neoplasm

robust Machine Learning Mapping of sEMG Signals to Future Actuator Commands in Biomechatronic Devices

在线全文

学校读者我要写书评

暂无评论

Journal of Bionic Engineering 2024年第1期21卷 270-287页

作者： Ali Nasr Sydney Bell rachel L.Whittaker Clark r.Dickerson John McPhee Systems Design Engineering University of WaterlooWaterloo N2L 3G1Canada Kinesiology and Health Sciences University of WaterlooWaterloo N2L3G3Canada

A machine learning model for regression of interrupted Surface Electromyography(sEMG)signals to future control-oriented signals(e.g.,robot’s joint angle and assistive torque)of an active biomechatronic device for high-level myoelectric-based hierarchical control is proposed.A recurrent Neural Network(rNN)was trained using output data,initially obtained from offline optimization of the biomechatronic(human–robot)device and shifted by the prediction *** input of the rNN consisted of interrupted sEMG signals(to mimic signal disconnections)and previous kinematic signals of the assistive *** rNN with a 0.1-s prediction horizon could predict the control-oriented joint angle and assistive torque with 92%and 86.5%regression accuracy,respectively,for the test *** proposed approach permits a fast,predictive,and direct estimation of control-oriented signals instead of an iterative process that optimizes assistive torque in the inverse dynamic simulation of a multibody human–robot *** with these interrupted input signals significantly improves the regression accuracy in the case of sEMG signal *** robust Predictive Control-oriented Machine Learning(robust-MuscleNET)model can support volitional high-level myoelectric-based control of biomechatronic devices,such as exoskeletons,prostheses,and assistive/resistive *** work should study the application to prosthesis control as well as the repeatability of the high-level controller with electrode *** low-level hierarchical controller that manages the human–robot interaction,the assistance/resistance strategy,and the actuator coordination should also be studied.

关键词： Myoelectric-based control-Surface electromyography Machine learning Multibody system dynamics Exoskeleton Bionic

Characterization of the infectivity of an Indonesian Zika virus strain in mammalian cell lines

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Asian Pacific Journal of Tropical Biomedicine 2024年第5期14卷 215-224页

作者： Justus Thomas Obiajulu Sievers Anom Bowolaksono r.Tedjo Sasmono Graduate School of Biology Department of BiologyFaculty of Mathematics and Natural SciencesUniversitas IndonesiaDepok 16424Indonesia Eijkman research Center for Molecular Biology National Research and Innovation AgencyCibinong 16911Indonesia Cellular and Molecular Mechanisms in Biological System research Group Department of BiologyFaculty of Mathematics and Natural SciencesUniversitas IndonesiaDepok 16424Indonesia

Objective:To characterize the infection patterns and growth characteristics of the Zika virus(ZIKV)strain JMB-185 from Indonesia in various mammalian cell ***:ZIKV was grown in human(A549,HEK293,HepG2,Huh7,Jurkat,and THP-1)and non-human mammalian(rAW264.7,Vero,and Vero76)cell *** replication kinetics were measured using plaque assay,while intra-and extracellular viral rNA concentrations were assessed using *** cytometry was used to quantify the infected cells and cell viability was measured using an MTT *** ability of ZIKV to infect cell lines was visualized using a fluorescence immunostaining ***:This ZIKV strain preferentially infected the lung,kidney,and liver cell lines A549,HEK293,Huh7,Vero,and Vero76,but not the immune cells Jurkat,rAW264.7,and *** contrast,the ZIKV showed no sign of infection in HepG2 cells,while maintaining viral titer over 3 days post-infection,with no infection recorded in immunostaining,no increase in viral rNA,and no indication of cell ***:The Indonesian ZIKV strain has a similar infection profile as other strains,except for its poor infectivity on HepG2 *** on the growth characteristics of Indonesia ZIKV will help expand our understanding of the biology of ZIKV which will be useful for various applications including antiviral discovery.

关键词： Zika virus Infectivity replication Cell lines In vitro

Thermoregulation,incubator humidity,and skincare practices in appropriate for gestational age ultra-low birth weight infants:need for more evidence

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

World Journal of Pediatrics 2024年第7期20卷 643-652页

作者： Umesh Mishra Deanne August Karen Walker Pranav r.Jani Mark Tracy Faculty of Medicine and Health University of SydneySydneyAustralia Department of Neonatology Westmead HospitalWestmeadNSWAustralia Grantley Stable Neonatal Unit Royal Brisbane and Women’s HospitalBrisbaneAustralia School of Nursing Midwifery and Social WorkUniversity of QueenslandBrisbaneAustralia Department of Newborn Care Royal Prince Alfred HospitalCamperdownAustralia

Background Although not universal,active care is being offered to infants weighing<500 g at birth,referred to as ultra-low birth weight(ULBW)infants appropriate for gestational *** infants have the greatest risk of dy... 详细信息

Background Although not universal,active care is being offered to infants weighingrth,referred to as ultra-low birth weight(ULBW)infants appropriate for gestational *** infants have the greatest risk of dying or developing major *** infants face challenges related to fluid and heat loss as well as skin injury in the initial days of life from extreme anatomical and physiological immaturity of the *** there is an emerging literature on the outcomes of ULBW infants,there is a paucity of evidence to inform practice guidelines for delivering optimal care to this cohort of *** sources A comprehensive review of the literature was performed using the PubMed and Embase *** keywords included“thermoregulation or body temperature regulation”,“incubator humidity”,“skin care”,“infant,extremely low birth weight”and“ultra-low birth weight infants”.results Evidences for thermoregulation,incubator humidity,and skincare practices are available for preterm infants weighingrth but not specifically for ULBW *** on thermoregulation,incubator humidity,or skincare practices had a small sample size and did not include a sub-group analysis for ULBW *** practice recommendations in ULBW infants are adopted from research in very and/or extremely low birth weight *** This narrative review focuses on challenges in thermoregulation,incubator humidity,and skincare practices in ULBW infants,highlights current research gaps and suggests potential developments for informing practices for improving health outcomes in ULBW infants.

关键词： Incubator humidity Neonatal intensive care unit Skincare Thermoregulation Ultra-low birth weight

DEM analysis of the influence of stirrer design on die filling with forced powder feeding

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Particuology 2024年第5期88卷 107-115页

作者： Chao Zheng Edward Yost Ariel r.Muliadi Nicolin Govender Ling Zhang Chuan-Yu Wu School of Chemistry and Chemical Engineering University of SurreyGuildfordGU2 7XHUnited Kingdom Small Molecule Pharmaceutics GenentechInc.One DNA WaySouth San FranciscoCA94080USA

Die filling is a critical stage during powder compaction,which can significantly affect the product quality and *** this paper,a forced feeder is introduced attempting to improve the filling performance of a lab-scale die filling *** die filling process is analysed with a graphics processing units(GPU)enhanced discrete element method(DEM).Various stirrer designs are assessed for a wide range of process settings(i.e.,stirrer speed,filling speed)to explore their influence on the die filling performance of free-flowing *** results show that die filing with the novel helical-ribbon(i.e.,type D)stirrer design exhibits the highest filling ratio,implying that it is the most robust stirrer design for the feeder configuration ***,die filling performance with the type D stirrer design is a function of the stirrer speed and the filling speed.A positive variation of filling ratio(ηf>0%)can be ensured over the whole range of filling speed by adjusting the stirrer speed(i.e.,increasing the stirrer speed).The approach used in this study can not only help understand how the stirrer design affects the die filling performance but also guide the optimization of feeder system and process settings.

关键词： Discrete element method Die filling Forced feeding Stirrer design GPU computing

Identification of earthquake induced structural damage based on synchroextracting transform

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Earthquake Engineering and Engineering Vibration 2024年第2期23卷 475-487页

作者： roshan Kumar Gaurav Kumar Wei Zhao Arvind r Yadav Gang Yu Jayendra Kumar Evans Amponsah Department of Electronic and Information Technology Miami College of Henan UniversityHenan 475004China Alliance University Alliance College of Engineering and DesignBanglore 562106India Department of Electronics and Comm Parul UniversityVadodra 391760India School of Electrical Engineering University of JinanJinan 250022China Department of Electronics and Comm NIT JamshedpurJamshedpur 831014India Department of Civil engineering Kwame Nkrumah University of Science and TechnologyKumasi 10959Ghana

Several popular time-frequency techniques,including the Wigner-Ville distribution,smoothed pseudo-Wigner-Ville distribution,wavelet transform,synchrosqueezing transform,Hilbert-Huang transform,and Gabor-Wigner transform,are investigated to determine how well they can identify damage to *** this work,a synchroextracting transform(SET)based on the short-time Fourier transform is proposed for estimating post-earthquake structural *** performance of SET for artificially generated signals and actual earthquake signals is examined with existing *** other tested techniques,SET improves frequency resolution to a great extent by lowering the influence of smearing along the time-frequency ***,interpretation and readability with the proposed method are improved,and small changes in the time-varying frequency characteristics of the damaged buildings are easily detected through the SET method.

关键词： cross-term damage detection earthquake signal synchroextracting transform time-frequency

Uncovering Microstructure-Property relationship in Ni-Alloyed Fe-Mn-Al-C Low-Density Steel Treated by Hot-rolling and Air-Cooling Process

在线全文

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第4期37卷 713-725页

作者： Xiaoliang Jia Guhui Gao Xiaolu Gui Chun Feng r.D.K.Misra Bingzhe Bai School of Mechanical Electronicand Control EngineeringBeijing Jiaotong UniversityBeijing100044China CNPC Tubular Goods research Institute Xi’an710077China Laboratory for Excellence in Advanced Steel research University of Texas at El PasoEl PasoTX79968-0521USA School of Material Science and Engineering Key Laboratory of Advanced Materials of Ministry of EducationTsinghua UniversityBeijing100084China

This paper focuses on the relationship between the microstructure and tensile properties of Fe-Mn-Al-C low-density high-strength steel processes by hot-rolling and air-cooling process. The microstructure analysis reveals that the combination of hot-rolling and air-cooling results in the formation of heterogeneous structures comprising different-sized γ and B_(2) phases in the low-density steel with the addition of nickel (Ni). The addition of Ni promotes the formation of the B_(2) phase and induces the pinning of B_(2) phase particles at the γ grain boundaries. This pinning effect effectively hinders the growth of the γ grains, leading to grain refinement. The tensile test results demonstrate that LDS-5Ni (low-density steel, LDS) exhibits excellent high strength and ductility combination, e.g., a tensile strength of 1535 MPa, yield strength of 1482 MPa, and elongation of 23.3%. These remarkable mechanical properties are primarily attributed to the combined strengthening contributions of grain refinement and duplex nano-sized second-phase precipitation hardening.

关键词： Low-density steel Microstructure B_(2)phase κ-Carbide Tensile properties