检索结果-南通市图书馆

Magnetic/Magnetostrictive Properties Together with Resistivity and Corrosion Behaviors of CoFe_2 and Its Composite with CoFe_2N

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2017年第7期33卷 744-750页

作者： B.q.Geng Y.q.Ma M.Wang z.L.Ding W.H.Song B.C.zhao Key Laboratory of Materials Physics Institute of Solid State Physics Chinese Academy of Sciences Hefei 230031 China

The CoFe_2alloy（CF） was prepared by reducing CoFe_2O_4 in the H_2 ambient. Subsequently the CF sample was nitrided in the NH_3 atmosphere to produce the composite of CoFe_2N and CoFe_2. The magnetostriction, thermal expansion, resistivity and corrosion resistance of CF sample and the nitrided sample（CFN）at 1000？C were investigated. The saturation magnetostriction coefficiency λ_s and thermal expansion coefficient ？ at 300 K for the nitrided CFN were 50 ppm and 10 ppm/K, respectively, approximately equal to those for the CF sample. However, compared with CF, CFN presents a decrease in temperature coefficient R_λ（300 K） of magnetostriction by 11%. The smaller resistivity and improved corrosion resistance in the H_2SO_4 solution may expand the applications of the CoFe_2 in the fields needing lower resistivity or in the acidic environment.

关键词： CoFe alloy CoFe_2N alloy Magnetostriction Resistivity Corrosion resistance

Self-induced birefringence of white-light continuum generated by interaction of focused femtosecond laser pulses with fused silica

在线全文

学校读者我要写书评

暂无评论

High Power Laser Science and Engineering 2020年第2期8卷 71-76页

作者： J.qian G.D.Wang K.Y.Lou D.Y.Shen q.Fu q.z.zhao State Key Laboratory of High Field Laser Physics Shanghai Institute of Optics and Fine MechanicsChinese Academy of SciencesShanghai 201800China Center of Materials Science and Optoelectronics Engineering University of Chinese Academy of SciencesBeijing 100049China

White-light continuum can be induced by the interaction of intense femtosecond laser pulses with condensed *** using two orthogonal polarizers,a self-induced birefringence of continuum is observed when focusing femtosecond laser pulses into bulk fused *** is,the generated white-light continuum is synchronously modulated anisotropically while propagating in fused ***-resolved detection confirms that self-induced birefringence of continuum shows a growth and saturation feature with time *** adjusting laser energy,the transmitted intensity of continuum modulated by self-induced birefringence also varies *** analysis with time evolution indicates that it is the focused femtosecond laser pulses that induce anisotropic microstructures in bulk fused silica,and the anisotropic structures at the same time modulate the generated continuum.

关键词： femtosecond laser pulses fused silica self-induced birefringence white-light continuum

Enhancing strength and ductility of AlSi10Mg fabricated by selective laser melting by TiB_(2)nanoparticles

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2022年第14期109卷 254-266页

作者： Y.K.Xiao H.Chen z.Y.Bian T.T.Sun H.Ding q.Yang Y.Wu q.Lian z.Chen H.W.Wang State Key Laboratory of Metal Matrix Composites Shanghai Jiao Tong UniversityShanghai 200240China School of Materials Science&Engineering Shanghai Jiao Tong UniversityShanghai 200240China

In the metallic components fabricated by the emerging selective laser melting(SLM)technology,most strategies used for strengthening the materials sacrifice the ductility,leading to the so-called strengthductility *** the present study,we report that the strength and ductility of materials can be enhanced simultaneously by introducing nanoparticles,which can break the trade-off of the metallic *** the case of in-situ nano-TiB_(2)decorated AlSi10Mg composites,the introduced nanoparticles lead to columnar-to-equiaxed transition,grain refinement and texture *** increasing content of nanoparticles,the strength increases ***,the ductility first increases and then *** results show that the ductility is controlled by the competition between the crack-induced catastrophic fracture and ductile fracture associated with dislocation *** first increase of ductility is mainly attributed to the suppression of crack-induced catastrophic fracture when TiB_(2)nanoparticles *** the further increase of TiB_(2)nanoparticles,the subsequent decrease of ductility is mainly controlled by dislocation ***,the materials will exhibit the optimum strength and ductility combination in a certain range of TiB_(2)*** study clarifies the physical mechanism controlling ductility for nano-TiB_(2)decorated Al Si10Mg composites,which provides the insights for the design of structural materials.

关键词： Selective laser melting Aluminium matrix composites Ductility Mechanical behavior Dislocations Cracks

Embedding laser-generated CdTe nanocrystals into ultrathin znIn_(2)S_(4) nanosheets with sulfur vacancies for boosted photocatalytic H_(2) evolution

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2023年第35期166卷 113-122页

作者： z.G.Tai G.T.Sun X.H.zhang X.B.Yang T.Wang z.Y.Fang q.Ye L.C.Jia H.q.Wang State Key Laboratory of Solidification Processing Center for Nano Energy MaterialsSchool of Materials Science and EngineeringNorthwestern Polytechnical UniversityXi’an 710072China Research&Development Institute of Northwestern Polytechnical University in Shenzhen Shenzhen 518063China School of Materials Science and Engineering Shaanxi Normal UniversityXi’an 710119China

To suppress the inner charge recombination and inject vast electrons,CdTe nanocrystals are embedded into ultrathin znIn_(2)S_(4) nanosheets to construct znIn_(2)S_(4)/CdTe heterostructures,where the nanocrystals are generated by a laser irradiation *** optimal znIn_(2)S_(4)/CdTe heterojunction exhibits an excellent catalytic activity of 24.3 mmol/h/g,which is relatively high among the znIn_(2)S_(4)-based photocatalysts with-out noble *** enhancement is ascribed to a win-win mechanism of nanoscale heterojunctions and sulfur *** strong electron coupling effect,which is verified by density functional the-ory(DFT)calculations,impels the photo-generated electrons transfer from CdTe to znIn_(2)S_(4),boosting the charge ***,the sulfur vacancies existing in znIn_(2)S_(4) can capture photoelectrons and act as active sites,facilitating the H_(2) generation *** addition,the znIn_(2)S_(4) base and the znIn_(2)S_(4)/CdTe heterojunction also possess an evident photothermal effect and renewable cycle phenomena,enhancing the photocatalytic *** research provides new insights into the regulation of charge transfer through embedding nanocrystals.

关键词： Photocatalysis Hydrogen evolution Laser irradiation Heterostructure Sulfur vacancies

Constitutive equation and model validation for a 31 vol.% B_4Cp/6061Al composite during hot compression

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2018年第10期34卷 1730-1738页

作者： L. zhou C. Cui q.z. Wang C. Li B.L. Xiao z.Y. Ma Institute of Metal Research Chinese Academy of Sciences Shenyang 110016 China School of Electromechanical and Vehicle Engineering Yantai University Yantai 264005 China School of Mechanical Engineering Shenyang Ligong University Shenyang 110159 China Nuclear and Radiation Safety Center Ministry of Environmental Protection Beijing 100082 China

An accurate constitutive equation is essential to understanding the flow behavior of B4C/A1 compos-ites during the hot deformation. However, the constitutive equations developed previously in literature are generally for low strain rate deformation. In the present work, we modified the general consti-tutive equation and take the high strain rate correction into account. The constitutive equation for a 31 vol.% B4Cp/6061AI composite was constructed based on the flow stresses measured during isothermal hot compression at temperatures ranging from 375 to 525 ℃ and strain rates from 0.01 to 10 s^-1. The experimental flow stresses were corrected by considering temperature-dependent Arrhenius factor. The modified equation was then verified by using DEFORM-3D finite element analysis to simulate the exper-imental hot compression process. The results show that the modified equation successfully predicts flow stress, load-displacement, and the temperature rise. This helps to optimize the hot deformation process, and to obtain desirable properties, such as reduced porosity and homogenous particle distribution in B4C/AI composites.

关键词： Composites B4C/AI Constitutive equation Hot compression Finite element simulation

Amino Compounds in Poultry Litter,Litter-Amended Pasture Soils and Grass Shoots

在线全文

学校读者我要写书评

暂无评论

Pedosphere 2014年第2期24卷 178-185页

作者： z.q.HE z.N.SENWO H.X.zOU I.A.TAzISONG D.A.MARTENS USDA-ARS Southern Regional Research Center Department of Biological and Environmental Sciences Alabama A&M University Department of Chemical and Biological Engineering the University of Maine USDA-ARS Southwest Watershed Research Center

Amino compounds （ACs）, i.e., amino acids and amino sugars, are the major forms of organic nitrogen （N） in animal manure and soil. To increase our understanding on the effect of long-term poultry litter （PL） application on soil AC pools and turnover, in this study, we determined the contents of 21 ACs in 23 PL samples, i5 soil samples collected from 0-20, 20-40, and 40-60 cm layers of five pasture plots with 0, 5, 10, 15 and 20 years of PL applications, and 5 grass shoot samples grown on these pasture fields. The contents of 21 ACs were simultaneously determined by methanesulfonic acid hydrolysis/extraction and anion chromatography-pulsed amperometry. PL application increased soil total and individual AC contents with a distribution pattern similar to that of AC in PL. The highest AC-N concentrations were observed in the soils with 10- or 15-year PL applications, inconsistent with the order of annual application rates or eunmlative applied PL amounts. Application of PL increased the AC contents in grass shoots whereby the highest increase of most ACs was with the shoots from the fields that received PL for 5 years. These observations suggested that both freshly applied and residual PL had contributions to the soil AC-N, and that PL application also accelerated AC-N transformation in soil.

关键词： amino acids amino sugars broiler feed soil nitrogen

Microstructural softening induced adiabatic shear banding in Ti-23Nb-0.7Ta-2zr-O gum metal

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2020年第19期54卷 31-39页

作者： Silu Liu Y.z.Guo z.L.Pan X.z.Liao E.J.Lavernia Y.T.zhu q,M,Wei Yonghao zhao Nano and Heterogeneous Materials Center School of Materials Science and EngineeringNanjing University of Science and TechnologyNanjing 210094China School of Aeronautics Northwestern Polytechnical UniversityXi’an 710072China Department of Mechanical Engineering University of North Carolina at CharlotteNC 28223-0001USA School of Aerospace Mechanical and Mechatronic EngineeringThe University of SydneyNSW 2006Australia Department of Materials Science and Engineering University of Californi1IrvineCA 92697USA Department of Materials Science and Engineering North Carolina State UniversityNC 27695USA

Ti-23Nb-0.7Ta-2zr-O gum metal(GM)is an attractive candidate material for applications that require superior mechanical *** our earlier investigation of the GM[1],geometrical softening and the generation of adiabatic shear bands(ASBs)were proposed as primary reasons for the documented anisotropic impact *** the present study,electron backscattered diffraction(EBSD)analysis reveals two different deformed microstructures,i.e.,deformed ultrafine grains(UFGs)and dynamically recrystallized UFGs,formed in the ASBs of GM samples processed by extrusion equal channel angular pressing(ECAP),*** calculation of temperature rise during dynamic compression suggests that the above microstructure differences in the ASBs was originated from their different maximum ASB temperatures(608 K for extruded GM and 1159 K for ECAP-processed GM).Moreover,our calculation on the temperature at the onset of ASBs indicates that microstructural softening is the primary cause for the development of ASBs in both extruded GM(321 K)and ECAP-processed GM(331 K).

关键词： Gum metal Split hopkinson bar Adiabatic shear band Microstructures

Finite Element Prediction of the Thermal Conductivity of GNP/Al Composites

在线全文

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2022年第5期35卷 825-838页

作者： X.S.Yang L.zhou K.Y.Liu z.Y.Liu q.z.Wang B.L.Xiao z.Y.Ma School of Electromechanical and Automotive Engineering Yantai UniversityYantai264005China Shi-Changxu Innovation Center for Advanced Materials Institute of Metal ResearchChinese Academy of SciencesShenyang110016China

A 3 D multi-scale finite element model was developed to predict the effective thermal conductivity of graphene nanoplatelet(GNP)/Al *** factors influencing the effective thermal conductivity of the GNP/Al composites were investigated,including the orientation,shape,aspect ratio,configuration and volume fraction of *** results show that GNPs shape has a little influence on the thermal conductivity of GNP/Al composites,and composites with elliptic GNPs have the highest thermal *** addition,with increasing the aspect ratio of GNPs,the thermal conductivity of GNP/Al composites increases and finally tends to be *** GNPs configuration strongly influences the thermal conductivity of GNP/Al composites,and the thermal conductivity of the composites with layered GNPs is the highest among the five *** effective thermal conductivity is sensitive to volume fraction of ***,when the volume fraction of layered GNPs reaches 1.54%,the thermal conductivity of GNP/Al composites is as high as 400 W/m *** findings of this study could provide a good theoretical basis for designing high thermal conductivity GNP/Al composites.

关键词： Multi-scale finite element model Thermal conductivity GNP/Al composites Shape Aspect ratio Configuration

Experimental study of compressible boundary layer on a cone at angles of attack

在线全文

学校读者我要写书评

暂无评论

Acta Mechanica Sinica 2009年第3期25卷 325-333页

作者： A.Maslov D.Bountin A.Shiplyuk A.Sidorenko q.Shen z.Bi Khristianovich Institute of Theoretical and Applied Mechanics(ITAM)and Novosibirsk State University china Academy of Aerospace Aerodynamics(CAAA)

Experimental study was conducted for boundarylayers on a sharp 5° half-angle cone of 400mm length at angles of attack. The model was tested in the T-326 hypersonic wind tunnel （ITAM） at freestream Mach number M = 5.95. Mean and fluctuation wall characteristics of the boundary layer are measured at 0°, 2°, 3° and 4° angles of attack for different stagnation pressures. Pulsation measurements are carried out by means of ALTP sensor. Pressure and temperature distributions along the model are obtained, and transition beginning and end locations have been found. Boundary layer stabilization with the increase of angle of attack and the decrease of stagnation pressure is observed. High frequency pulsations inherent to hypersonic boundary layer （second mode） have been detected.

关键词： Compressible boundary layer Transition,Experimental study