检索结果-南通市图书馆

Precipitation of multi-type nano-quasicrystals in a Mg-zn-Y alloy

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第3期12卷 997-1008页

作者： W.z.Wang X.z.zhou L.F.zhang H.q.Ye z.q.Yang Shenyang National Laboratory for Materials Science Institute of Metal ResearchChinese Academy of ScienceShenyang 110016China Ji Hua Laboratory Foshan 528251China Foshan University Foshan 528231China

Mg-6zn-1Y(at.%)ribbons with strengthening precipitates of multi-type nanoquasicrystals were prepared by melt-spinning followed by aging *** evolution of the rapidly solidified ribbons during isothermal aging was comprehensively studied using various electron microscopy *** new kinds of decagonal quasicrystals were formed in aged ribbons,in addition to precipitation of nanometer icosahedral ***-resolution observations reveal that both decagonal quasicrystals can be modeled by quasiperiodic tiling with decagonal clusters of 2.5 nm in diameter,but overlap of neighboring clusters in both decagonal quasicrystals is different from the Gummelt model observed in other quasicrystals.A shell composed of complex Laves Mg-zn domains was formed surrounding each decagonal quasicrystal precipitate upon prolonged *** addition,all kinds of nanoprecipitates exhibit excellent structure and size stability at 573 *** findings may have implications for not only fundamental studies about quasicrystals,but also microstructural manipulation of high-performance Mg alloys.

关键词： quasicrystal Mg alloys Rapid solidification Scanning-transmission electron microscopy.

Probing the Bardeen-Kiselev black hole with the cosmological constant caused by Einstein equations coupled with nonlinear electrodynamics using quasinormal modes and greybody bounds

在线全文

学校读者我要写书评

暂无评论

Communications in Theoretical Physics 2024年第6期76卷 102-119页

作者： S R Wu B q Wang z W Long College of Physics Guizhou UniversityGuiyang 550025China College Pharmacy Guizhou University of Traditional Chinese MedicineGuiyang 550025China

In this work,we investigate a static and spherically symmetric Bardeen-Kiselev black hole(BH)with the cosmological constant,which is a solution of the Einstein-non-linear Maxwell field *** compute the quasinormal frequencies for the Bardeen-Kiselev BH with the cosmological constant due to electromagnetic and gravitational *** varying the BH parameters,we discuss the behavior of both real and imaginary parts of the BH quasinormal frequencies and compare these frequencies with the Reissner-Nordström-de Sitter BH surrounded by quintessence(RN-dSq).Interestingly,it is shown that the responses of the Bardeen-Kiselev BH with the cosmological constant and the RN-dSq under electromagnetic perturbations are different when the charge parameter q,the state parameter w and the normalization factor c are varied;however,for the gravitational perturbations,the responses of the Bardeen-Kiselev BH with the cosmological constant and the RN-dSq are different only when the charge parameter q is ***,compared with the gravitational perturbations,the electromagnetic perturbations can be used to understand nonlinear and linear electromagnetic fields in curved spacetime *** interesting observation is that,due to the presence of Kiselev quintessence,the electromagnetic perturbations around the Bardeen-Kiselev BH with the cosmological constant damps faster and oscillates slowly;for the gravitational perturbations,the quasinormal mode decays slowly and oscillates *** also study the reflection and transmission coefficients along with the absorption cross section in the Bardeen-Kiselev BH with the cosmological constant;it is shown that the transmission coefficients will increase due to the presence of Kiselev quintessence.

关键词： quasinormal modes greybody factors Bardeen-Kiselev black hole with cosmological constant

Statistical Multi-Fragmentation in Hot Compound Nuclei

在线全文

学校读者我要写书评

暂无评论

Chinese journal of nuclear physics 1996年第4期 187-199页

作者： G.X.Dai H.Y.Wu L.M.Duan z.Y.Li q.z.luo z.Y.He B.G.zhang W.X.Wen Institute of Modern Physics,the Chinese Academy of Scienoes,P.O.Bax 31,Lanzhou 730000

The first three-fold and four-fold fragmentation measurements in hot compound nuclei pro-duced in the reactions of a 25 MeV/u 40At beam with targets of 209Bi,197Au,159Tb,115In,103Rh,and93Nb are *** distributions are measured for these fragments,including distributions of ve-locities,relative velocities,angles,relative angles,masses,fragment mass ratios,total kinetic energies（TKE）,as well as the yield ratios of three-fold fragmentation to fission P32 and the time difference △t be-tween two scissions after the formation of one compound nucleus.

关键词： —Three-fold and four-fold fragmentation Scission time difference Yield ratio P32 Biaxial deformation Triaxial deformation Space-time model

Rational design of AgGaS/znS/znS quantum dots with a near-unity photoluminescence quantum yield via double shelling scheme

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2024年第2期169卷 235-242页

作者： H.X.Lu H.Liu z.z.Fu Y.Y.Chen H.q.Dai z.Hu W.L.zhang R.q.Guo Institute for Electric Light Sources School of Information Science and TechnologyFudan UniversityShanghai 200433China Institute of Future Lighting Academy for Engineering and TechnologyFudan UniversityShanghai 200433China Yiwu Research Institute of Fudan University YiwuZhejiang 322000China zhongshan-Fudan Joint Innovation Center Zhongshan 528437China

In this study,a two-step method was used to synthesize highly luminescent AgGaS/znS/znS quantum dots(qDs).In the first step,an inner znS shell was formed via a one-pot method,which resulted in a smaller lattice mismatch between the AgGaS core and the outer znS shell,thereby facilitating the formation of a thick outer *** the two-step shelling process,the synthesized AgGaS/znS/znS qDs showed an excellent photoluminescence quantum yield(PLqY)of 96.4%with a peak wavelength of 508 nm,repre-senting the highest PLqY reported thus far for AgGaS ***,the effect of halogen ions in zn precursors on the shelling process was *** was proposed that the capacity of halogen ions to coordinate with the qDs influenced the balance between zn cation diffusion and znS shelling ***,the znS shelling reaction was dominant when znCl_(2)was employed,while zn cation diffusion was the dominant process under the I^(−)-rich *** work provides insights into the interfacial restructuring during the znS shelling and offers a clear map for the tailored synthesis of core/shell qDs.

关键词： AgGaS quantum dots Photoluminescence Core/shell Alloyed core/shell interface

Asymmetrical Fault Current Calculation Method and Influencing Factors Analysis of Droop-Controlled Inverters

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

CSEE Journal of Power and Energy Systems 2024年第2期10卷 562-573页

作者： Huimin zhao zhikang Shuai Jun Ge An luo Weimin Wu z.John Shen College of Electrical and Information Engineering Hunan UniversityChangsha 410006China Electrical Engineering Department Shanghai Maritime UniversityShanghai 201306China Department of Electrical and Computer Engineering Ilinois Institute of TechnologyChicagoIL 60616 USA

Since the fault dynamic of droop-controlled inverter is different from synchronous generators (SGs), protection devices may become invalid, and the fault overcurrent may damage power electronic devices and threaten the safety of the microgrid. Therefore, it is imperative to conduct a comprehensive fault analysis of the inverter to guide the design of protection schemes. However, due to the complexity of droop control strategy, existing literatures have simplified asymmetric fault analysis of droop-controlled inverters to varying degrees. Therefore, accurate fault analysis of a droop-controlled inverter is needed. In this paper, by analyzing the control system, an accurate fault model is established. Based on this, a calculation method for instantaneous asymmetrical fault current is proposed. In addition, the current components and current characteristics are analyzed. It was determined that fault currents are affected by control loops, fault types, fault distance and nonlinear limiters. In particular, the influences of limiters on the fault model, fault current calculation and fault current characteristics were analyzed. Through detailed analysis, it was found that dynamics of the control loop cannot be ignored, the fault type and fault distance determine fault current level, and part of the limiters will totally change the fault current trend. Finally, calculation and experimental results verify the correctness of the proposed method.

关键词： Asymmetrical fault analysis droop control fault current calculation method limiter transient fault characteristics

In situ digital testing method for quality assessment of soft soil improvement with polyurethane

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Rock Mechanics and Geotechnical Engineering 2024年第5期16卷 1732-1748页

作者： X.F.Wang C.J.Wang W.V.Yue z.J.zhang z.q.Yue Department of Civil Engineering China University of Geosciences (Beijing)BeijingChina Department of Water Science and Engineering Zhengzhou UniversityZhengzhouChina Department of Geotechnical Engineering Tongji UniversityShanghaiChina Department of Civil Engineering The University of Hong KongChina

This study purposes an in situ testing method on quality assessment of soil *** drilling data includes the spatial distribution and in situ strength of untreated and treated soil along three different drillholes measured by on-site drilling monitoring *** factual drilling data can characterize the degree of soil improvement by penetration injection with permeable *** from on-site drilling monitoring shows that the linear zones represent constant drilling speeds shown in the plot of drill bit advancement *** drilling time,which indicates the spatial distributions of soil *** soil profile at the study site is composed of four layers,which includes fill,untreated silty clay,treated silty clay,and mucky *** results of soil profile are verified by the parallel site *** constant drilling speeds profile the coring-resistant strength of drilled *** comparing with the untreated silty clay,the constant drilling speeds of the treated silty clay have been decreased by 13.0-62.8%.Two drilling-speed-based indices of 61.2%and 65.6%are proposed to assess the decreased average drilling speed and the increased in situ strength of treated silty *** tests,*** compressive strength(UCS)test,have been performed with core sample to investigate and characterize in situ strength by comparing that with drilling *** show that the average predicted strengths of treated silty clay are 2.4-6.9 times higher than the average measured strength of untreated silty *** UCS-based indices of 374.5%and 344.2%verified the quality assessment(qA)results by this new in situ *** method provides a cost-effective tool for quality assessment of soil improvement by utilizing the digital drilling data.

关键词： Drilling process monitoring system Hydraulic rotary drilling process Constant drilling speed Soil improvement quality assessment

Microstructure evolution and shape memory behaviors of Ni_(47)Ti_(44)Nb_(9)alloy subjected to multistep thermomechanical loading with different prestrain levels

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2024年第4期171卷 80-93页

作者： Y.H.zhang H.Li z.W.Yang X.Liu q.F.Gu State Key Laboratory of Solidification Processing School of Materials Science and EngineeringNorthwestern Polytechnical UniversityXi’an 710072China Shaanxi Key Laboratory of High-Performance Precision Forming Technology and Equipment Northwestern Polytechnical UniversityXi’an 710072China

Ni_(47)Ti_(44)Nb_(9)shape memory alloy(SMA)is a promising material in the aerospace field due to its wide transformation *** application of shape memory effect depends on multistep thermomechan-ical loading,viz.,low-temperature deformation and subsequent heating to ***-temperature deformation prestrain plays a pivotal role in shape memory properties tailoring of SMA ***,microstructure evolution and deformation mechanisms of Ni_(47)Ti_(44)Nb_(9)SMA subjected to vari-ous prestrain levels are still *** this end,microstructure evolution and shape memory behaviors of Ni_(47)Ti_(44)Nb_(9)alloy subjected to multistep thermomechanical loading with prestrain levels of 8%-16%at-28℃(M_(s)+30℃)were *** results demonstrate that the stress-strain curve of the specimen exhibits four distinct stages at a maximal prestrain of 16%.Whereas stageⅡand stageⅢend at prestrains of∼8%and∼12%,*** stageⅡ,the stress-induced martensitic transformation is accompanied by the dislocation slip of the NiTi matrix andβ-Nb *** stageⅢ,in addition to the higher density of dislocations and further growth of stress-induced martensite variants(SIMVs),(001)compound twins are introduced as a result of the(001)deformation twinning in stress-induced ***{20-1}martensite twins are gradually introduced in stageⅣ.Correspondingly,after subsequent unloading and heating,a higher density of{114}austenite twins form in the specimen with a larger prestrain of 16%.With increasing prestrain from 8%to 16%,the recoverable strainε_(re)^(T)upon heating increases first and then ***ε_(re)^(T)obtains a maximum of 7.03%at 10%prestrain and de-creases to 6.17%at 16%*** increase ofε_(re)^(T)can be attributed to the formation of new SIMVs,the further growth of existing SIMVs,and the recoverable(001)compound *** the decrease ofε_(re)^(T)is mainly associated with the irrecoverable strain by{20−1}martensite *** effe

关键词： Ni_(47)Ti_(44)Nb_(9)shape memory alloy Wide transformation hysteresis Thermomechanical loading Microstructure evolution Shape memory behaviors Stress-induced martensitic transformation Deformation twinning

Electromagnetic Performance Analysis of Variable Flux Memory Machines with Series-magnetic-circuit and Different Rotor Topologies

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

CES Transactions on Electrical Machines and Systems 2024年第1期8卷 3-11页

作者： qiang Wei z.q.zhu Yan Jia Jianghua Feng Shuying Guo Yifeng Li Shouzhi Feng Department of Electronic and Electrical Engineering The University of SheffieldSheffield S13JDU.K. IEEE the CRRC zhuzhou Institute Company Ltd. Zhuzhou 412001China

In this paper,the electromagnetic performance of variable flux memory(VFM)machines with series-magnetic-circuit is investigated and compared for different rotor *** on a V-type VFM machine,five topologies with different interior permanent magnet(IPM)arrangements are evolved and optimized under same *** on two-dimensional(2-D)finite element(FE)method,their electromagnetic performance at magnetization and demagnetization states is *** reveals that the iron bridge and rotor lamination region between constant PM(CPM)and variable PM(VPM)play an important role in torque density and flux regulation(FR)***,the global efficiency can be improved in VFM machines by adjusting magnetization state(MS)under different operating conditions.

关键词： Memory machine Permanent magnet Rotor topologies Series magnetic circuit Variable flux

Advanced nanoparticles in osteoarthritis treatment

在线全文

学校读者我要写书评

暂无评论

Biomaterials Translational 2024年第2期5卷 95-113页

作者： Liang q. Cheng z. qin L. Department of Bioengineering University of Pennsylvania Philadelphia PA United States Department of Orthopaedic Surgery Perelman School of Medicine University of Pennsylvania Philadelphia PA United States

Osteoarthritis (OA) is the most prevalent degenerative joint disorder, affecting hundreds of millions of people globally. Current clinical approaches are confined to providing only symptomatic relief. Research over the past two decades has established that OA is not merely a process of wear and tear of the articular cartilage but involves abnormal remodelling of all joint tissues. Although many new mechanisms of disease have been identified in the past several decades, the efficient and sustainable delivery of drugs targeting these mechanisms in joint tissues remains a major challenge. Nanoparticles recently emerged as favoured delivery vehicles in OA treatment, offering extended drug retention, enhanced drug targeting, and improved drug stability and solubility. In this review, we consider OA as a disease affecting the entire joint and initially explore the pathophysiology of OA across multiple joint tissues, including the articular cartilage, synovium, fat pad, bone, and meniscus. We then classify nanoparticles based on their composition and structure, such as lipids, polymers, inorganic materials, peptides/proteins, and extracellular vesicles. We summarise the recent advances in their use for treatment and diagnosis of OA. Finally, we discuss the current challenges and future directions in this field. In conclusion, nanoparticle-based nanosystems are promising carriers that advance OA treatment and diagnosis. © 2024, Chinese Medical Multimedia Press Co Ltd. All rights reserved.

关键词： cartilage liposome micelle nanoparticles osteoarthritis synovium