检索结果-南通市图书馆

Glucose-sensitive Membrane with PBA-based Contraction-type Linear Polymer as Chemical Valves Prepared by Surface Grafting

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Polymer Science 2024年第8期42卷 1067-1076页

作者： Chun-peng zhang Si-Jia Gao Ying Luo Lei Zou Yong-jun zhang State Key Laboratory of Separation Membranes and Membrane Processes School of Material Science and EngineeringTiangong UniversityTianjin 300387China State Key Laboratory of Separation Membranes and Membrane Processes School of Pharmaceutical SciencesTiangong UniversityTianjin 300387China Tianjin Key Laboratory of Extracorporeal Life Support for Critical Diseases Institute of Hepatobiliary DiseaseNankai University Affiliated Third Center HospitalTianjin 300170China Cangzhou Institute of Tiangong University Cangzhou 061000China

Glucose-sensitive membrane has potential application in self-regulating insulin *** acid(PBA)is a well-known glucose ***,most PBA-based glucose-sensitive materials are expansion-type,which are not suitable as chemical valves in membrane pores for self-regulating insulin *** to a new glucose-sensitive mechanism,we synthesized PBA-based contraction-type glucose-sensitive liner polymer and ***,a glucose-sensitive membrane was prepared by grafting PBA-based contraction-type glucose-sensitive linear polymer on the membrane *** adjusting the chain length and chain density,the glucose-sensitivity of the membrane was *** membrane can reversibly regulate insulin release at physiologically relevant glucose concentrations in simulates body fluids and fetal bovine *** membrane also has good stability,anti-fouling and biocom *** has potential application in selfregulating insulin release.

关键词： Phenylboronic acid Glucose-sensitive Membrane Surface grafting Insulin

Joint fuzzy background and adaptive foreground model for moving target detection

在线全文

学校读者我要写书评

暂无评论

Frontiers of Computer Science 2024年第2期18卷 93-106页

作者： Dawei zhang peng WANG Yongfeng DONG Linhao LI Xin LI School of Artificial Intelligence Hebei University of TechnologyTianjin 300401China Lane Department of Computer Science and Electrical Engineering West Virginia UniversityMorgantownWV 26506-6109USA

Moving target detection is one of the most basic tasks in computer *** conventional wisdom,the problem is solved by iterative optimization under either Matrix Decomposition(MD)or Matrix Factorization(MF)*** utilizes foreground information to facilitate background *** uses noise-based weights to fine-tune the *** both noise and foreground information contribute to the recovery of the *** jointly exploit their advantages,inspired by two framework complementary characteristics,we propose to simultaneously exploit the advantages of these two optimizing approaches in a unified framework called Joint Matrix Decomposition and Factorization(JMDF).To improve background extraction,a fuzzy factorization is *** fuzzy membership of the background/foreground association is calculated during the factorization process to distinguish their contributions of both to background *** describe the spatio-temporal continuity of foreground more accurately,we propose to incorporate the first order temporal difference into the group sparsity constraint *** temporal constraint is adjusted *** foreground and the background are jointly estimated through an effective alternate optimization process,and the noise can be modeled with the specific probability *** experimental results of vast real videos illustrate the effectiveness of our *** with the current state-of-the-art technology,our method can usually form the clearer background and extract the more accurate ***-noise experiments show the noise robustness of our method.

关键词： matrixdecomposition matrix factorization generalized sparsity noise modeling

Structure characterization of the oxide film on FGH96 superalloy powders with various oxidation degrees

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第9期31卷 2037-2047页

作者： Yang Liu Yufeng Liu Sha zhang Lin zhang peng zhang Shaorong zhang Na Liu Zhou Li Xuanhui Qu Beijing Advanced Innovation Center for Materials Genome Engineering Institute for Advanced Materials and TechnologyUniversity of Science and Technology BeijingBeijing 100083China Institute of Materials Intelligent Technology Liaoning Academy of MaterialsShenyang 110004China Science and Technology on Advanced High Temperature Structural Materials Laboratory AECC Beijing Institute of Aeronautical MaterialsBeijing 100095China

The structure of the oxide film on FGH96 alloy powders significantly influences the mechanical properties of *** this study,FGH96 alloy powders with various oxygen contents were investigated using high-resolution transmission electron microscopy and atomic probe technology to elucidate the structure evolution of the oxide *** dispersive spectrometer analysis revealed the presence of two distinct components in the oxide film of the alloy powders:amorphous oxide layer covering the γ matrix and amorphous oxide particles above the *** alloying elements within the oxide layer showed a laminated distribution,with Ni,Co,Cr,and Al/Ti,which was attributed to the decreasing oxygen equilibrium pressure as oxygen diffused from the surface into the γ *** the other hand,Ti enrichment was observed in the oxide particles caused by the oxidation and decomposition of the carbide *** analysis of the oxide film with oxygen contents of 140,280,and 340 ppm showed similar element distributions,while the thickness of the oxide film varies approximately at 9,14,and 30 nm,*** findings provide valuable insights into the structural analysis of the oxide film on FGH96 alloy powders.

关键词： Ni-based superalloys surface structure oxide layer thickness oxidation behavior element distribution

Recovery of cyanophycin granule polypeptide from activated sludge: carbon source dependence and aggregation-induced luminescence characteristics

在线全文

学校读者我要写书评

暂无评论

Frontiers of Environmental Science & Engineering 2024年第2期18卷 25-34页

作者： Kui Zou Hongyuan Liu Bo Feng Taiping Qing peng zhang College of Environment and Resources Xiangtan UniversityXiangtan 411105China

In the sewage treatment process,facilitating the conversion of pollutants into value-added resources holds great potential for reducing the amount of greenhouse gas emissions and promoting economic *** granule polypeptide(CGP),a recently discovered high value-added biopolymer present in activated sludge,has provided new avenues for the recovery of ***,the mechanisms that regulate CGP synthesis and the characteristics of this biopolymer in activated sludge remain unclear thus *** study investigated the synthesis of CGP,polyhydroxyalkanoates(PHA),and alginate-like exopolysaccharides(ALE)in various microbial aggregates under different carbon sources feeding *** results showed that the CGP yields was superior that of PHA and ALE when subjected to identical carbon source feeding ***,biofilm was more conducive to CGP accumulation than floc *** with glucose and methanol,sodium acetate significantly enriched the CGP synthetase-encoding gene(cphAabundance=~17419),resulting in the highest CGP yield(average 107.1 mg/g MLSS)in both biofilm and floc *** study is the first to reported the characteristic fluorescence of CGP(Ex/Em=~360/450 nm)caused by the aggregated luminescence of arginine on the side ***,this study highlights the potential application of CGP as a fluorescent material and offers insights into CGP recovery from activated sludge in wastewater treatment plants.

关键词： Cyanophycin Polyhydroxyalkanoate Alginate-like exopolysaccharides Bioresource recovery Aggregation-induced luminescence

Optimization Mechanism of Mechanical Properties of Basalt Fiber-Epoxy Resin Composites by Interfacially Enriched Distribution of Nano-Starch Crystals

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Mechanical Engineering 2024年第3期37卷 289-296页

作者： Yanpeng Wei Jiale Zhao Jian Zhuang peng zhang Zhiwu Han College of Biological and Agricultural Engineering Jilin UniversityChangchun 130025China Key Laboratory of Bionics Engineering Ministry of EducationJilin UniversityChangchun 130025China Weichai Lovol Heavy Industry Co. LTDWeifang 261031China

Fibre reinforced polymer composites have become a new generation of structural materials due to their unique advantages such as high specific strength,designability,good dimensional stability and ease of large-area monolithic ***,the problem of interfacial bonding between the resin matrix and the fibres limits the direct use of reinforcing fibres and has become a central difficulty in the development of basalt fibre-epoxy *** paper proposes a solution for enhancing the strength of the fibre-resin interface using maize starch nanocrystals,which are highly yield and ***,in this paper,corn starch nanocrystals(SNC)were prepared by hydrolysis,and were deposited on the surface of basalt fibers by electrostatic *** that,in order to maximize the modification effect of nano-starch crystals on the interface,the basalt fiber-epoxy resin composite samples were prepared by mixing in a pressureless molding *** test results shown that the addition of basalt fibers alone led to a reduction in the strength of the *** of 0.1 wt%SNC on the surface of basalt fibers can make the strength consistent with pure epoxy *** the adsorption amount of SNC reached 0.5 wt%,the tensile strength of the samples was 23.7%higher than that of pure epoxy *** is due to the formation of ether bond homopolymers between the SNC at the fibre-epoxy interface and the epoxy resin,which distorts the originally smooth interface,leading to increased stress concentration and the development of *** enhances the binding of basalt *** conclusions of this paper can provide an effective,simple,low-cost and non-polluting method of interfacial enhancement modification.

关键词： Basalt fibres Epoxy resin Fibre reinforced composites Starch nanocrystals Eco-friendly

Communication efficiency optimization of federated learning for computing and network convergence of 6G networks

在线全文

学校读者我要写书评

暂无评论

Frontiers of Information Technology & Electronic Engineering 2024年第5期25卷 713-727页

作者： Yizhuo CAI Bo LEI Qianying ZHAO Jing peng Min WEI Yushun zhang Xing zhang Wireless Signal Processing and Network Laboratory Beijing University of Posts and TelecommunicationsBeijing 100876China Research Institute of China Telecom Co. Ltd.Beijing 102209China Beijing Telecom Beijing 100011China

Federated learning effectively addresses issues such as data privacy by collaborating across participating devices to train global ***,factors such as network topology and computing power of devices can affect its training or communication process in complex network *** and network convergence(CNC)of sixth-generation(6G)networks,a new network architecture and paradigm with computing-measurable,perceptible,distributable,dispatchable,and manageable capabilities,can effectively support federated learning training and improve its communication *** guiding the participating devices'training in federated learning based on business requirements,resource load,network conditions,and computing power of devices,CNC can reach this *** this paper,to improve the communication eficiency of federated learning in complex networks,we study the communication eficiency optimization methods of federated learning for CNC of 6G networks that give decisions on the training process for different network conditions and computing power of participating *** simulations address two architectures that exist for devices in federated learning and arrange devices to participate in training based on arithmetic power while achieving optimization of communication efficiency in the process of transferring model *** results show that the methods we proposed can cope well with complex network situations,effectively balance the delay distribution of participating devices for local training,improve the communication eficiency during the transfer of model parameters,and improve the resource utilization in the network.

关键词： Computing and network convergence Communication efficiency Federated learning Two architectures

Flexible incidence angle scanning surface plasmon resonance microscopy for morphology detection with enhanced contrast

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Photonics Research 2024年第6期12卷 1213-1221页

作者： LINGKE WANG JINGYU MI SHUQI WANG WENRUI LI ju TANG JIAWEI zhang JIWEI zhang JIANLIN ZHAO Key Laboratory of Light Field Manipulation and Information Acquisition Ministry of Industry and Information Technologyand Shaanxi Key Laboratory of Optical Information TechnologySchool of Physical Science and TechnologyNorthwestern Polytechnical UniversityXi’an 710129China

Surface plasmon resonance microscopy(SPRM)has been massively applied for near-field optical measurement,sensing,and imaging because of its high detection sensitivity,nondestructive,noninvasive,wide-field,and label-free imaging ***,the transverse propagation characteristic of the surface plasmon wave generated during surface plasmon resonance(SPR)leads to notable“tail”patterns in the SPR image,which severely deteriorates the image ***,we propose an incidence angle scanning method in SPRM to obtain a resonance angle image with exceptional contrast that significantly mitigates the adverse effects of“tail”*** resonance angle image provides the complete morphology of the analyzed samples and enables two-dimensional quantification,which is incapable in conventional *** effectiveness of the method was experimentally verified using photoresist square samples with different sizes and two-dimensional materials with various geometric *** edges of samples were fully reconstructed and a maximum fivefold increase in the image contrast has been *** method offers a convenient way to enhance the SPRM imaging capabilities with low cost and stable performance,which greatly expands the applications of SPRM in label-free detection,imaging,and quantification.

关键词： angle resonance surface

In^(3+)-doped Sr_(2)Fe_(1.5)Mo_(0.5)O_(6−δ)cathode with improved performance for an intermediate-temperature solid oxide fuel cell

在线全文

学校读者我要写书评

暂无评论

Nano Research 2024年第1期17卷 407-415页

作者： Yumei Ma Lijie zhang Kang Zhu Binze zhang Ranran peng Changrong Xia Ling Huang State Key Laboratory of Chemistry and Utilization of Carbon Based Energy Resources College of ChemistryXinjiang UniversityUrumqi 830046China Department of Materials Science and Engineering University of Science and Technology of ChinaHefei 230026China

Promoting the oxygen reduction reaction(ORR)is critical for commercialization of intermediate-temperature solid oxide fuel cells(IT-SOFCs),where Sr_(2)Fe_(1.5)Mo_(0.5)O_(6)−δ(SFM)is a promising cathode by working as a mixed ionic and electronic *** this work,doping of In^(3+)greatly increases the oxygen vacancy concentration and the content of adsorbed oxygen species in Sr_(2)Fe_(1.5)Mo_(0.5−x)InxO_(6−δ)(SFMInx),and thus effectively promotes the ORR *** a typical example,SFMIn_(0.1)reduces the polarization resistance(R_(p))from 0.089 to 0.046Ω∙cm^(2)at 800°C,which is superior to those doped with other metal *** addition,SFMIn0.1 increases the peak power density from 0.92 to 1.47 W∙cm^(−2)at 800°C with humidified H_(2)as the fuel,indicating that In3+doping at the Mo site can effectively improve the performance of SOFC cathode material.

关键词： solid oxide fuel cell cathode In3+doping oxygen reduction reaction(ORR) Sr_(2)Fe_(1.5)Mo_(0.5)O_(6-δ)

Modeling of LF refining process:a review

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第2期31卷 289-317页

作者： Zi-cheng Xin Jiang-shan zhang Kai-xiang peng jun-guo zhang Chun-hui zhang Qing Liu State Key Laboratory of Advanced Metallurgy University of Science and Technology BeijingBeijing100083China School of Automation and Electrical Engineering University of Science and Technology BeijingBeijing100083China Tangshan Branch Hebei Iron and Steel Co.Ltd.Tangshan063000HebeiChina Xinjiang Bayi Iron and Steel Co. Ltd.Baosteel GroupWulumuqi830022XinjiangChina

With the increasing demand for energy conservation and emission reduction,more attentions have been paid to the intelligentization,greenization and low carbonization during the transformation and upgrading of steelmaking *** furnace(LF)refining is one of the key procedures in steelmaking process and has been widely used in steelmaking plants for its high equipment matching degree,low equipment investment and outstanding refining *** to the main tasks of LF refining process,the modeling methods of temperature prediction model,slag-making model,alloying model,argon blowing model and model of inclusions behavior were systematically reviewed,and the advantages and disadvantages of each modeling method were *** addition,the technical framework for the future has also been proposed based on existing works,including classification of raw materials,graphic representation of knowledge,introduction,upgradation and management of device/equipment,customization of steelmaking,modeling of refining process,synergy of models,intelligentization of decision-making,automation of control,and digitization of processes and operations,aiming to provide a reference for the modeling and intelligent development of LF refining process.

关键词： LF refining Temperature prediction Slag-making Alloying Argon blowing Inclusion behavior Modeling method