检索结果-南通市图书馆

Present-day Upper-crustal Strain Rate Field in Southeastern Tibet and its Geodynamic Implications:Constraints from GPS Measurements with ABIC Method

引用

Acta Geologica Sinica(English Edition) 2024年第1期98卷 265-275页

作者： YANG Shaohua pan Jiawei LI Haibing SHI Yaolin Key Laboratory of Continental Dynamics of Ministry of Natural Resources Institute of GeologyChinese Academy of Geological SciencesBeijing 100037China Jiangsu Donghai Continental Deep Hole Crustal Activity National Observation and Research Station DonghaiJiangsu 222300China Key Laboratory of Computational Geodynamics College of Earth and Planetary SciencesUniversity of Chinese Academy of SciencesBeijing 100049China

The Earth’s surface kinematics and deformation are fundamental to understanding crustal *** effective research approach is to estimate regional motion field and deformation fields based on modern geodetic *** the discrete observed velocity field is obtained,the velocity related fields,such as dilatation rate and maximum shear strain rate,can be estimated by applying varied mathematical *** study applied Akaike's Bayesian Information Criterion(ABIC)method to calculate strain rate fields constrained by GPS observations in the southeast Tibetan *** with results derived from other three methods revealed that our ABIC-derived strain rate fields were more *** maximum shear strain rate highlighted the Xianshuihe–Xiaojiang fault system as the main boundary for the outward migration of material in southeastern Tibet,indicating rotation of eastern Tibet material around the eastern Himalaya rather than whole extrusion along a fixed ***,distinct dilatation rate patterns in the northeast and southwest regions of the fault system were *** northeast region,represented by the Longmenshan area,exhibited negative dilatational anomalies;while the southwest region,represented by the Jinsha River area north of 29°N,displayed positive dilatational *** indicates compression in the former and extension in the *** with deep geophysical observations,we believe that the upper and lower crusts of the Jinsha River area north of 29°N are in an entire expanding state,probably caused by the escape-drag effect of *** presence of a large,low-viscosity region south of 29°N may not enable the entire escape of the crust,but instead result in a differential escape of the lower crust faster than the upper crust.

关键词： strain rate differential escape ABIC GPS southeastern Tibet

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Aerodynamic/control integrated optimization method for unpowered high-speed vehicle configuration design

引用

Chinese Journal of Aeronautics 2024年第7期37卷 153-167页

作者： Xin pan Linlin WANG Li LI Lulu JIANG Gang CHEN State Key Laboratory for Strength and Vibration of Mechanical Structures School of Aerospace EngineeringXi’an Jiaotong UniversityXi’an 710049China Shannxi Key Laboratory for Environment and Control of Flight Vehicle School of Aerospace EngineeringXi’an Jiaotong UniversityXi’an 710049China Beijing Institute of Space Long March Vehicle Beijing 100076China AVIC Xi’an Aeronautics Computing Technique Research Institute Xi’an 710068China

The unpowered high-speed vehicle experiences a significant coupling between the disciplines of aerodynamics and control due to its characteristics of high flight speed and extensive maneuverability within large *** conventional aircraft conceptual design process follows a sequential design approach,and there is an artificial separation between the disciplines of aerodynamics and control,neglecting the coupling effects arising from their *** a result,this design process often requires extensive iterations over long periods when applied to high-speed vehicles,and may not be able to effectively achieve the desired design *** enhance the overall performance and design efficiency of high-speed vehicles,this study integrates the concept of Active Control Technology(ACT)from modern aircraft into the philosophy of aerodynamic/control integrated *** integrated optimization strategies,with differences in coupling granularity,have been ***,these strategies are put into action on a biconical vehicle that operates at Mach *** results reveal that the comprehensive performance of the synthesis optimal model derived from the aerodynamic/control integrated optimization strategy is improved by 31.76%and 28.29%respectively compared to the base model under high-speed conditions,demonstrating the feasibility and effectiveness of the method and optimization strategies ***,in comparison to the single-stage strategy,the multi-stage strategy takes into deeper consideration the impact of control *** a result,the control performance of the synthesis opti-mal model derived from the multi-stage strategy improves by 13.99%,whereas the single-stage strategy only achieves a 5.79%*** method enables a fruitful interaction between aerodynamic configuration design and control system design,leading to enhanced overall performance and design ***,it improves the controllability of high-sp

关键词： Aerodynamic/Control Integrated Optimization MDO High-speed vehicle Shape Optimization Controllability

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A theoretical model for impact protection of flexible polymer material

引用

Theoretical & Applied Mechanics Letters 2024年第3期14卷 217-226页

作者： Huifeng Xi Hui pan Song Chen Heng Xiao MOE Key Lab of Disaster Forecast and Control in Engineering School of Machanics and Construction EngineeringJinan UniversityGuangzhou 510632China Doctor Workstation of Xuwen County Guangdong Hydropower Energy Co. Ltd.Xuwen 524100China

The relationship between the protective performance of flexible polymer material and material parameters(elasticmodulus,viscosity coefficient)is explored,an impact collision motion equation between two bodies is establishedfrom the viscoelastic material constitutive,and the relationship between the kinematic response and the materialparameters is *** on the Kelvin constitutive model,a theoretical model for impact between the pro-tective body and the protected body is established,then the dynamic response is *** feasibility of themodel was verified by drop hammer experiment,and the material parameters(elastic modulus,viscosity coeffi-cient)were obtained by *** model is discretized and the relationship between local impact response andmaterial parameters is *** discussion results on the relationship between the impact response and theprotective material performance indicate that adjusting the elastic modulus,viscosity coefficient,and thicknessof the protective material can effectively improve protective effect.

关键词： Flexible polymer material Viscoelastic material Kelvin modelDynamic response Elastic modulus and viscosity coefficient

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Numerical Analysis on Charging Performance of the Macro-Encapsulating Combined Sensible-Latent Heat Storage System with Structural Parameters

引用

Journal of Thermal Science 2024年第3期33卷 1026-1036页

作者： WANG Wei pan Zhenfei WANG Jingfu WU Yuting MA Chongfang Key Laboratory of Enhanced Heat Transfer and Energy Conservation Ministry of EducationCollege of Energy and Power EngineeringBeijing University of TechnologyBeijing100124China Key Laboratory of Heat Transfer and Energy Conversion Beijing MunicipalityCollege of Energy and Power EngineeringBeijing University of TechnologyBeijing100124China

For combined sensible-latent heat storage system(CSLHS)(termed as the hybrid configuration),macro encapsulation can effectively solve the leakage problem of ***,due to the poor thermal conductivity of PCMs,the charging performance of the hybrid configuration slightly increases compared to the solid structure(with only sensible materials).Meanwhile,the natural convection in the PCMs zone could improve the charging ***,how to improve natural convection intensity is a key issue for the CSLHS by macro *** is found that adding fins can significantly enhance natural convection and accelerate the melting of *** this paper,we proposed the hybrid configuration with fins built-in by macro encapsulation,and analyzed its charging performance with different fin structural parameters in the PCM zone by CFD *** the case,the sensible heat storage material is high-temperature concrete and the PCM is a low-melting-point mixed molten *** analyzed the effects of fin number,fin length and fin thickness on the charging performance of the hybrid configuration *** the result,the charging performance increases with the fin number,but the increase rate gradually *** the fin number is 6,the charging performance increases by 20.18%compared to the situation without *** charging performance increases gradually with the fin *** with the hybrid configuration without fin,for each 10 mm increase in fin length,its charging performances increase by 4.09%,5.26%,7.02%,8.77%,11.70%,and 15.79%,*** from number and length of fins,the effect of thickness on the charging performance is very *** the fin thickness increased from 1 mm to 4 mm,the charging performance only increased by 2.3%.It indicates that the main reason for the improving the charging performance is to increase the natural convection intensity by dividing the PCM zone through *** results show that the charging performance

关键词： macro-encapsulation hybrid configuration natural convection structural parameter charging performance

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Coupled Inversion of Pressure and Tiltmeter Data for Mapping Hydraulic Fracture Geometry

引用

Acta Mechanica Solida Sinica 2024年第3期37卷 396-405页

作者： Zuorong Chen Xiaofang Jiang Zhejun pan Robert G.Jeffrey National Key Laboratory of Continental Shale Oil Northeast Petroleum UniversityDaqing163318China SCT Operation Pty.Ltd. PO Box 824WollongongNSW2520Australia

Pressure and tilt data are jointly inverted to simultaneously map the orientation and dimensions of a hydraulic *** deformation induced by a fracture under internal pressure is modeled using the distributed dislocation *** planar fracture is represented by four quarter ellipses,joined at the center and sharing *** configuration provides a straightforward model for characterizing asymmetric fracture *** inverse problem of mapping the fracture geometry is formulated using the Bayesian probabilistic method,combining the a priori information on the fracture model with updated information from pressure and tilt *** the nonlinear inverse problem is achieved by pseudo-randomly sampling the posterior probability distribution through the Markov chain Monte Carlo *** resulting posterior probability distribution is then explored to assess uncertainty,resolution,and correlation between model *** experiments are conducted to verify the accuracy and validity of the proposed analysis method in mapping the fracture geometry using synthetic pressure and tilt data.

关键词： Hydraulic fracture mapping Coupled inversion Tilt Treating pressure

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Heat Recuperation for the Self-Condensing CO_(2)Transcritical Power Cycle

引用

Journal of Thermal Science 2024年第5期33卷 1630-1641页

作者： pan Lisheng SHI Weixiu SUN Yin SUN Yiwei WEI Xiaolin State Key Laboratory of High-temperature Gas Dynamics Institute of MechanicsChinese Academy of SciencesBeijing 100190China School of Environment and Energy Engineering Beijing University of Civil Engineering and ArchitectureBeijing 100044China

The supercritical CO_(2)Brayton cycle has potential to be used in electricity generation occasions with its advantages of high efficiency and compact *** on a so-called self-condensing CO_(2)transcritical power cycle,a model was established and four different layouts of heat recuperation process were analyzed,a without-recuperation cycle,a post-recuperation cycle,a pre-recuperation cycle and a re-recuperation *** results showed that the internal normal cycle's share of the whole cycle increases with increasing the cooling pressure and decreasing the final cooled *** load in the supercritical heater decreases with increasing the cooling *** perspective of performance,the re-recuperation cycle and the pre-recuperation cycle have similar thermal efficiency which is much higher than other two *** thermal efficiency and net power output have a maximum value with the cooling pressure,except in the condition with the final cooled temperature of 31℃.Considering both the complexity and the economy,the pre-recuperation cycle is more applicable than the other *** 35℃of the final cooled temperature,the thermal efficiency of the pre-recuperation cycle reaches the peak 0.34 with the cooling pressure of 8.4 MPa and the maximum net power output is 2355.24 kW at 8.2 MPa of the cooling pressure.

关键词： CO_(2)transcritical power cycle heat recuperation process self-condensing

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Recent advances in stretchable triboelectric nanogenerators for use in wearable bioelectronic devices

引用

Bio-Design and Manufacturing 2024年第4期7卷 566-590页

作者： Yaling Wang Pengcheng Zhu Yue Sun pan Li Yanchao Mao College of Science Henan Agricultural UniversityZhengzhou 450002China Key Laboratory of Materials Physics of Ministry of Education School of PhysicsZhengzhou UniversityZhengzhou 450001China

Wearable bioelectronic devices have the capacity for real-time human health monitoring,the provision of tailored services,and natural interaction with smart ***,these wearable bioelectronic devices rely on conventional rigid batteries that are frequently charged or replaced and are incompatible with the skin,leading to a discontinuity in complex therapeutic tasks related to human health monitoring and human-machine *** triboelectric nanogenerator(TENG)is a high-efficiency energy harvesting technology that converts mechanical into electrical energy,effectively powering wearable bioelectronic *** study comprehensively overviews recent advances in stretchable TENG for use in wearable bioelectronic *** working mechanism of stretchable TENG is initially explained.A comprehensive discussion presents the approaches for fabricating stretchable TENG,including the design of stretchable structures and the selection of stretchable ***,applications of wearable bioelectronic devices based on stretchable TENG in human health monitoring(body movements,pulse,and respiration)and human-machine interaction(touch panels,machine control,and virtual reality)are ***,the challenges and developmental trends regarding wearable bioelectronic devices based on stretchable TENG are elaborated.

关键词： Stretchable Triboelectric nanogenerators Structure Human health monitoring Human-machine interaction

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effect of carbon material and surfactant on ink property and resulting surface cracks of fuel-cell microporous layers

引用

Chinese Journal of Chemical Engineering 2024年第5期69卷 1-12页

作者： Zhekun Chen Weitong pan Longfei Tang Xueli Chen Fuchen Wang Engineering Research Center of Resource Utilization of Carbon-containing Waste with Carbon Neutrality Ministry of EducationEast China University of Science and TechnologyShanghai 200237China Key Laboratory of Pressure Systems and Safety Ministry of EducationEast China University of Science and TechnologyShanghai 200237China

Ensuring the consistency of electrode structure in proton-exchange-membrane fuel cells is highly desired yet challenging because of wide-existing and unguided cracks in the microporous layer(MPL). The first thing is to evaluate the homogeneity of MPL with cracks quantitatively. This paper proposes the homogeneity index of a full-scale MPL with an area of 50 cm~2, which is yet to be reported in the literature to our knowledge. Besides, the effects of the carbon material and surfactant on the ink and resulting MPL structure have been studied. The ink with a high network development degree produces an MPL with low crack density, but the ink with high PDI produces an MPL with low crack homogeneity. The polarity of the surfactant and the non-polarity of polytetrafluoroethylene(PTFE) are not mutually soluble,resulting in the heterogeneous PTFE distribution. The findings of this study provide guidelines for MPL fabrication.

关键词： Proton-exchange-membrane fuel cell Microporous layer Crack density Crack homogeneity Polytetrafluoroethylene distribution Surfactant

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Limits of Uneven Battery Power in Modular Multilevel Converter-based Battery Energy Storage Systems

引用

CSEE Journal of Power and Energy Systems 2024年第2期10卷 686-695页

作者： Yao pan Xiaofeng Sun Wei Zhao Xin Li Yao Cai Institute of Electrical Engineering Yanshan UniversityQinhuangdao 066004China

For modular multilevel converter-based battery energy storage systems (MMC-BESS), uneven power among batteries of SMs will be deduced by battery aging, battery fault, etc., which will degrade performance and even lead to system failure. For maintaining the balance of capacitor voltage, this paper analyzes the limits of the uneven power of batteries, which are presented as the current limits in this paper. According to analysis, an analytical method is proposed that only the dc and fundamental frequency components of the arm current are used to calculate current limits. With the current limits it is able to evaluate the reasonability of power distribution among batteries. Meanwhile, increase of fundamental frequency component will enhance the current limits, and the dc component determines the size relationship between the absolute values of the upper and lower current limits. Finally, simulation model and experiment prototype are built for verifying the theoretical analysis and current limits calculation method, and satisfactory results are provided.

关键词： Arm current balance of capacitor voltage current limits MMC-BESS uneven power

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Longitudinal vibration characteristics of a tapered pipe pile considering the vertical support of surrounding soil and construction disturbance

引用

Earthquake Engineering and Engineering Vibration 2024年第1期23卷 51-63页

作者： Li Zhenya pan Yunchao He Xianbin Lv Chong Mohammad Towhid Key Laboratory of Ministry of Education for Geomechanics and Embankment Engineering Hohai UniversityNanjing 210098China Geotechnical Research Institute Hohai UniversityNanjing 210098China MOE Key Laboratory of Soft Soils and Geoenvironmental Engineering Zhejiang UniversityHangzhou 310058China

This research is concentrated on the longitudinal vibration of a tapered pipe pile considering the vertical support of the surrounding soil and construction ***,the pile-soil system is partitioned into finite segments in the vertical direction and the Voigt model is applied to simulate the vertical support of the surrounding soil acting on the pile *** surrounding soil is divided into finite ring-shaped zones in the radial direction to consider the construction ***,the shear complex stiffness at the pile-soil interface is derived by solving the dynamic equilibrium equation for the soil from the outermost to innermost *** displacement impedance at the top of an arbitrary pile segment is obtained by solving the dynamic equilibrium equation for the pile and is combined with the vertical support of the surrounding soil to derive the displacement impedance at the bottom of the upper adjacent ***,the displacement impedance at the pile head is obtained based on the impedance function transfer ***,the reliability of the proposed solution is verified,followed by a sensitivity analysis concerning the coupling effect of the pile parameters,construction disturbance and the vertical support of the surrounding soil on the displacement impedance of the pile.

关键词： tapered pipe pile longitudinal vibration vertical support of the surrounding soil construction disturbance displacement impedance

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：