检索结果-南通市图书馆

Europium recovery process by means of polymeric nanoparticles functionalized with acrylic acid,curcumin and fumaramide

在线全文

学校读者我要写书评

暂无评论

Journal of rare Earths 2024年第10期42卷 1950-1959页

作者： p.A.martínez-montoya J.m.del río A.de J.morales-ramirez m.Corea Escuela Superior de Ingeniería Química e Industrias Extractivas ESIQIE-IPNDepartamento de Ingeniería Metalúrgica UPALM S/N Col.Lindavista Escuela Superior de Ingenieria Química e Industrias Extractivas ESIQIE-IPNLaboratorio de Investigación en Polímeros y NanomaterialesUPALM S/N Col.Lindavista Centra de Investigación e Innovación Tecnológica CIITEC-IPNCda.de CECATIs/n

polymeric nanoparticles of poly(methyl methacrylate) were obtained by emulsion polymerization techniques in a proce ss of two *** particles were functionalized with acrylic acid,curcumin,and fumaramide and three series of polymeric particles were *** incorporation of functional groups was confirmed by Fourier transform-infrared spectrosocopy(FT-Ir) and ultraviolet-visible(UV-Vis) *** spherical morphology of particles with an average diameter of 100 nm was observed by scartning electron microscopy(SEm).The polymeric materials were used for recovery of [Eu]from synthetic *** nanoparticles show excellent chelation capacity to trap rare-earth ions,because they recover more than 85% of [Eu] at pH of *** images of SEm after extraction process show arrays between particles with larger average particle sizes to 1.5 *** addition,the particles have a good stripping capacity,exceeding 50% of it,maintaining their homogeneity in morphology and good stability in dispersion for the recovery and stripping processes.A pseudo-second model order is obtained for the extraction and stripping processes while the best results of stripping process are obtained at pH of6.

关键词： Chelating effect Emulsion polymerization Extraction process rare earths Stripping process [Eu]recovery

Influence of cerium ions on structure-dependent magnetic properties of Ba-Sr m-type hexaferrite nanocrystals

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of rare Earths 2024年第2期42卷 364-372,I0005页

作者： ram A.pawar Sunil m.patange p.m.Dighe Sher Singh meena Abdullah GAl-Sehemi mehboobali pannipara Santosh S.Jadhav Department of physics ArtsCommerce and Science CollegeAhmednagar413711MaharashtraIndia Department of physics Shri Krishna MahavidyalayaGunjotiDistOsmanabad413606MaharashtraIndia padmashri Vikhe patil College of Arts Science and CommercePravaranagarA/P.Loni(Kd)Tal.RahataDistAhmednagar413713MaharashtraIndia Solid State physics Division Bhabha Atomic Research CentreMumbai400085MaharashtraIndia Department of Chemistry King Khalid UniversityAbha61413Saudi Arabia Department of physics D.S.M's ArtsCommerce and Science CollegeJintur431509MaharashtraIndia

The present study is a systematic effort to investigate the structure-sensitive magnetic parameters of Ce^(3+) substituted Ba-Sr hexaferrite nanocrystals chemically formulated as Ba_(0.5)Sr_(0.5)Ce_(x)Fe_(12-x)O_(19) where x=0.0-0.2 with Δx=*** hexaferrite powders were prepared using the sol-gel self-ignition route and structurally characterized by means of powder X-ray diffraction and Fourier transform infrared *** creation of the m-type hexaferrite phase within the synthesized samples was revealed from the rietveld refinement of the X-ray *** occurrence of a secondary phase of CeO_(2) was revealed within the hexaferrites for the substitution,x> *** refined X-ray diffraction data were utilized to compute the lattice parameters,X-ray density,and lattice parameter *** crystal structure plotted from the refined XrD data reveals the occupancy of the ions at different lattice *** XpS data of the hexaferrite were analyzed to confirm the oxidation states of the constituent *** nanocrystalline nature of the hexaferrites was revealed from the crystallite sizes calculated using Scherer's *** analysis of FTIr spectra confirms that only a fraction of Ce^(3+)accommodated in the lattice and the remaining Ce content reside in the form of the CeO_(2) *** morphology of the hexaferrites was analyzed from the FESEm profiles of the ferrite *** magnetic behavior study was performed by analyzing the Curie temperature,hysteresis loops,and hyperfine interactions by means of susceptibility,V.S.m,and mossbauer spectroscopy,*** hexaferrites with increasing coercivity,decreasing saturation magnetization,and decreasing Curie temperature are reported in the *** substituted Ce^(3+)ions inhibit the grain growth and create lattice imperfections giving rise to hexaferrites with tuned magnetic parameters suitable for different applications.

关键词： Ba-Sr hexaferrite Ce^(3+)substitution XpS Saturation magnetization Coercivity m?ssbauer spectroscopy

Nonlinear dynamic modeling of planar moving Timoshenko beam considering non-rigid non-elastic axial effects

在线全文

学校读者我要写书评

暂无评论

Applied mathematics and mechanics(English Edition) 2024年第3期45卷 479-496页

作者： m.ABBASI GAVArI m.r.HOmAEINEZHAD Faculty of mechanical Engineering K.N.Toosi University of TechnologyTehran 19991-43344Iran

Due to the importance of vibration effects on the functional accuracy of mechanical systems,this research aims to develop a precise model of a nonlinearly vibrating single-link mobile flexible *** manipulator consists of an elastic arm,a rotary motor,and a rigid carrier,and undergoes general in-plane rigid body motion along with elastic transverse *** accurately model the elastic behavior,Timoshenko’s beam theory is used to describe the flexible arm,which accounts for rotary inertia and shear deformation *** applying Newton’s second law,the nonlinear governing equations of motion for the manipulator are derived as a coupled system of ordinary differential equations(ODEs)and partial differential equations(pDEs).Then,the assumed mode method(Amm)is used to solve this nonlinear system of governing equations with appropriate shape *** assumed modes can be obtained after solving the characteristic equation of a Timoshenko beam with clamped boundary conditions at one end and an attached mass/inertia at the *** addition,the effect of the transverse vibration of the inextensible arm on its axial behavior is *** the axial rigidity,the effect makes the rigid body dynamics invalid for the axial behavior of the ***,numerical simulations are conducted to evaluate the performance of the developed model,and the results are compared with those obtained by the finite element *** comparison confirms the validity of the proposed dynamic model for the *** to the mentioned features,this model can be reliable for investigating the system’s vibrational behavior and implementing vibration control algorithms.

关键词： planar moving Timoshenko beam non-rigid non-elastic axial effect as-sumed mode method(Amm) nonlinear motion analysis

BaTiO3 solid solutions co-doped with Gd3+ and Eu3+:Synthesis,structural evolution and dielectric properties

在线全文

学校读者我要写书评

暂无评论

Journal of rare Earths 2024年第10期42卷 1920-1926页

作者： r.martínez-López m.pérez-Labra J.A.romero-Serrano F.r.Barrientos-Hernández m.reyes-pérez m.I.Valenzuela-Carrillo G.Urbano-reyes V.E.reyes-Cruz G.I.Dávila-pulido Academic Area of Earth Sciences and materials Autonomous University of Hidalgo State metallurgy and materials Department ESIQIE-IPNUPALM Autonomous University of Coahuila Boulevard Adolfo López Mateos S/n

In this paper,the synthesis,structural evolution,and dielectric properties of BaTiO3solid solutions codoped with rare earth elements(Gd3+and Eu3+) prepared using the solid-state reaction method are *** pure precursor powders of BaCl3,TiO2,Gd2O3,and Eu2O3were mixed in stoichiometric proportions,ground in an agate mortar before being uniaxially pressed at 250 mpa and sintered at 1300℃ in air atmosphere for 6 h to obtain Ba1-3xGd2xTi1-3xEu4xO3（x=0,0.0015,0.01 and0.1）.X-ray diffraction（XrD） and rietveld's refinement results reveal the crystal phase ferroelectric tetragonal BaTiO3for the samples with x=0,0.0015 and 0.01, as well as a consistent increment in the lattice parameters caused by the *** solubility limit of Gd3+and Eu3+in the BaTiO3structure is reached for the sample with x>0.01,and the orthorhombic Eu2TiO5and monoclinic BaTi2O5secondary phases were *** raman results show the characteristic peaks of ferroelectric tetragonal BaTiO3around 716 cm-1（LO of A1 symmetry）,515 cm-1（TO of A1 symmetry）,and 305 cm-1（B1）.The maximum relative permittivity measured at 1 kHz was recorded to be 6151.8 for the sample with x=0.0015,and a decrease in the Curie temperature to 105℃ with respect to the undoped sample was *** punctual microanalysis for the samples with x=0.0015,0.01,and 0.1 reveals grains composed of Ba,Ti,O,Gd,and Eu homogeneously distributed in the *** Ba/Ti ratios for samples with x=0.0015,0.01 and 0.1 are 2.86,2.91,and 0.68,respectively,indicating substitution at the Ti site for samples with x=0.0015 and 0.01 and a substitution at the Ba site for the sample with x=0.1.

关键词： BaTiO3 Doping Europium Gadolinium rare earths Synthesis

pile foundation in alternate layered liquefiable and non-liquefiable soil deposits subjected to earthquake loading

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Earthquake Engineering and Engineering Vibration 2024年第2期23卷 359-376页

作者： praveen Huded m Suresh r Dash LEA Associates South East Asia pvt.Ltd. New Delhi 110044India Indian Institute of Technology Bhubaneswar Khurda 752050India

pile foundations are still the preferred foundation system for high-rise structures in earthquake-prone *** foundations have experienced failures in past earthquakes due to *** on pile foundations in liquefiable soils has primarily focused on the pile foundation behavior in two or three-layered soil ***,in natural occurrence,it may occur in alternative layers of liquefiable and non-liquefiable ***,the experimental and/or numerical studies on the layered effect on pile foundations have not been widely addressed in the *** of the design codes across the world do not explicitly mention the effect of sandwiched non-liquefiable soil layers on the pile *** the present study,the behavior of an end-bearing pile in layered liquefiable and non-liquefiable soil deposit is studied *** study found that the kinematic bending moment is higher and governs the design when the effect of the sandwiched non-liquefied layer is considered in the analysis as opposed to when its effect is ***,ignoring the effect of the sandwiched non-liquefied layer in a liquefiable soil deposit might be a nonconservative design approach.

关键词： pile foundation liquefaction alternately layered soil fixity effect layered effect

Selection of digital fabrication technique in the construction industry--A multi-criteria decision-making approach

在线全文

学校读者我要写书评

暂无评论

Frontiers of Structural and Civil Engineering 2024年第7期18卷 977-997页

作者： m.p.SALAImANImAGUDAm J.JAYAprAKASH Department of Structural and Geotechnical Engineering School of Civil EngineeringVellore Institute of TechnologyVellore 632014India

Digital fabrication techniques,in recent decades,have provided the basis of a sustainable revolution in the construction ***,selecting the digital fabrication method in terms of manufacturability and functionality requirements is a complex *** paper presents alternatives and criteria for selection of digital fabrication techniques by adopting the multi-criteria decision-making *** alternatives considered in the study are concrete three-dimensional(3D)printing,shotcrete,smart dynamic casting,material intrusion,mesh molding,injection concrete 3D printing,and thin forming *** criteria include formwork utilization,reinforcement incorporation,geometrical complexity,material enhancement,assembly complexity,surface finish,and build *** demonstrates different multi-criteria decision-making techniques,with both subjective and objective weighting *** given ranking is based on the current condition of digital fabrication in the construction *** study reveals that in the selection of digital fabrication techniques,the criteria including reinforcement incorporation,build area,and geometrical complexity play a pivotal role,collectively accounting for nearly 70% of the overall *** the evaluated techniques,concrete 3D printing emerged as the best performer,however the shotcrete and mesh molding techniques in the second and third positions.

关键词： digital fabrication multicriteria decision-making concrete 3D printing

Kinematic analysis of flexible bipedal robotic systems

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Applied mathematics and mechanics(English Edition) 2024年第5期45卷 795-818页

作者： r.FAZEL A.m.SHAFEI S.r.NEKOO Department of mechanical Engineering Shahid Bahonar University of KermanKerman ***Iran Departamento de Ingenieria de Sistemas y Automatica Escuela Técnica Superior de IngenieriaUniversidad de SevillaSeville 41092Spain

In spite of its intrinsic complexities,the passive gait of bipedal robots on a sloping ramp is a subject of interest for numerous *** distinguishes the present research from similar works is the consideration of flexibility in the constituent links of this type of robotic *** is not a far-fetched assumption because in the transient(impact)phase,due to the impulsive forces which are applied to the system,the likelihood of exciting the vibration modes increases ***,the human leg bones that are involved in walking are supported by viscoelastic muscles and ***,for achieving more exact results,it is essential to model the robot links with viscoelastic *** this end,the Gibbs-Appell formulation and Newton's kinematic impact law are used to derive the most general form of the system's dynamic equations in the swing and transient phases of *** most important issue in the passive walking motion of bipedal robots is the determination of the initial robot configuration with which the system could accomplish a periodic and stable gait solely under the effect of gravitational *** extremely unstable nature of the system studied in this paper and the vibrations caused by the impulsive forces induced by the impact of robot feet with the inclined surface are some of the very serious challenges encountered for achieving the above-mentioned *** overcome such challenges,an innovative method that uses a combination of the linearized equations of motion in the swing phase and the algebraic motion equations in the transition phase is presented in this paper to obtain an eigenvalue *** solving this problem,the suitable initial conditions that are necessary for the passive gait of this bipedal robot on a sloping surface are *** effects of the characteristic parameters of elastic links including the modulus of elasticity and the Kelvin-Voigt coefficient on the walking stability of this type of

关键词： bipedal robot flexible link swing phase transient phase eigenvalue problem Kelvin-Voigt coefficient

Control system design for a pressure-tube-type supercritical water-cooled nuclear reactor via a higher order sliding mode method

在线全文

学校读者我要写书评

暂无评论

Nuclear Science and Techniques 2024年第1期35卷 145-154页

作者： m.Hajipour G.r.Ansarifar Department of Nuclear Engineering Faculty of PhysicsUniversity of IsfahanIsfahan 81746-73441Iran

Nuclear power plants exhibit non-linear and time-variable ***,designing a control system that sets the reactor power and forces it to follow the desired load is complicated.A supercritical water reactor(SCWr)is a fourth-generation conceptual *** an SCWr,the non-linear dynamics of the reactor require a controller capable of control-ling the *** this study,a pressure-tube-type SCWr was controlled during reactor power maneuvering with a higher order sliding mode,and the reactor outgoing steam temperature and pressure were controlled *** an SCWr,the temperature,pressure,and power must be maintained at a setpoint(desired value)during power *** point kinetics equations with three groups of delayed neutrons were used in the ***-order and classic sliding mode controllers were separately manufactured to control the plant and were compared with the pI controllers speci-fied in previous *** controlled parameters were reactor power,steam temperature,and ***,for these parameters,the pI controller had certain instabilities in the presence of *** classic sliding mode controller had a higher accuracy and stability;however its main drawback was the chattering *** was highly accurate and stable and had a small computational *** reality,it followed the desired values without oscillations and chattering.

关键词： Supercritical water nuclear reactor Higher order sliding mode controller Steam temperature Steam pressure point kinetics model

Solid-liquid extraction for yttrium recovery using porous polymeric resin(XAD-7) functionalized with D_(2)EHpA

在线全文

学校读者我要写书评

暂无评论

Journal of rare Earths 2024年第9期42卷 1764-1773,I0005页

作者： p.A.martínez-montoya r.G.Sanchez-Alvarado D.Y.medina-Velazquez m.L.Carrera-Jota p.Garnica-Chávez A.de J.morales-ramirez Higher School of Chemical Engineering and Extractive Industries ESIQIEIPNDepartment of Metallurgical EngineeringUPALM S/NCol.LindavistaGustavo A.Madero Cd.de MéxicoC.P07738Mexico metropolitan Autonomous University Department of MaterialsBasic Sciences and EngineeringAv.San Pablo No.180Col.Reynosa TamaulipasCd.de MéxicoC.P02200Mexico Center for research and Technological Innovation CIITECIPNCda.de CECATIs/nSanta CatarinaAzcapotzalcoC.P02250CDMXMexico

The recovery of yttrium is proposed by applying a solid-liquid extraction process using di-2-ethyl hexylphosphoric acid(D2EHpA) as extracting *** extracting agents were supported on a macro porous polymeric resin XAD-7(solid phase).Yttrium ions extraction and discharge tests were performed,firstly from a synthetic aqueous solution of 100 mg/L Y(liquid phase) at 25℃ with *** effects of pH of aqueous solutions bearing yttrium,volume fraction of extracting agents and the solid/liquid(S/L)ratio on the yttrium recovery were *** most favorable conditions for yttrium ions extraction are;20 vol% D_(2)EHpA functionalized resin,pH=1.5 and an S/L ratio of 10 mg/mL The discharge of yttrium ions was done under the same conditions of extraction stage,using a 2 mol/L [H_(2)SO_(4)] as stripping *** to 80% yttrium is extracted,while 75% yttrium is recovered in the striping *** all experiments,the reaction equilibrium is reached after 20 min,and the kinetics for the extraction stage was determined as a second-order ***,experiments were carried out to discharge the yttriumloaded resins,and it has been determined that the best pH value to strip the Y ions is *** tests of extraction and discharge for yttrium ions show that the functionalized resin can work at least five cycles without decreasing its ***,the proposed process was tested in a real solution with Y ions fro m a waste fluorescent la mp powder leached in H_(2)SO_(4),demonstrating the ability to effectively recover yttrium,separating it from various metals from the studied residue.

关键词： Yttrium recovery rare earth solid-liquid extraction XAD-7 resin Fluorescent lamps recycling Solid-liquid kinetics extraction