检索结果-南通市图书馆

Analysing the combined effect of crystallographic orientation and grain refinement on mechanical properties and corrosion behaviour of ECAPed ZE41 Mg alloy

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2020年第4期8卷 1128-1143页

作者： s.Prithivirajan s.narendranath Vijay Desai Corrosion Engineering Lab Department of Mechanical EngineeringNational Institute of Technology KarnatakaSurcithkalSrinivasanagarMangalore 575025KarnatakaIndia

Two step equal channel angular pressing carried out on as cast ZE41 Mg alloy resulted in a remarkable grain *** compared to grain size of 46p.m in as cast sample,refinement upto 2.5^01 was achieved after 8th pass equal channel angular pressing(ECAP).The combined effect of crystallographic orientation and grain refinement was investigated by analysing the mechanical properties and corrosion behaviour of ZE41 Mg alloy using electron back scattered diffraction(EBsD).The first stage comprises of 1st,2nd,3rd and 4th passes at a processing temperature of 300℃while the 5th,6th,7th and 8th passes were ECAPed at 275℃in second *** mechanical properties of ZE41 Mg 158 yield tensile strength(YTs),230 ultimate tensile strength(UTs)and 7%elongation in as cast condition is enhanced to 236 YTs,295 UTs and 19.76%,respectively,after first stage *** yield tensile strength deteriorated due to the effect of texture predominating grain refinement during the second stage *** corrosion resistance of ZE41 Mg was significantly enhanced by ECAP and is inferred from electrochemical impedance spectroscopy(EIs)and potentiodynamic polarisation *** role of microstructure was minimal on corrosion behaviour of ZE41 Mg due to extra resistance when tested in 0M ***,the influence of grain refinement greatly influenced the improvement in corrosion resistance of ZE4I Mg rather than crystallographic orientation observed from *** contrast,the crystallographic orientation predominated the effect of grain refinement during ZE41 Mg corrosion in chloride containing(0.1 M and 1 M NaCl)*** the observation of results it is found that equal channel angular pressing has the dual advantage of improving mechanical properties and corrosion resista nee of ZE41 Mg alloy.

关键词： Corrosion EBsD Equal channel angular pressing Magnesium alloy

Influence of Route-R on wrought magnesium AZ61 alloy mechanical properties through equal channel angular pressing

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2014年第2期2卷 159-164页

作者： Muralidhar Avvari s.narendranath Department of Mechanical Engineering NITK SurathkalSrinivasanagar575025KarnatakaIndia

A new fundamental route entitled‘Route-R’is introduced to refine the grains in the material through Equal Channel Angular Pressing(ECAP)*** route R,specimen is inverted to the original position in each ECAP *** the present work,AZ61 alloy is processed using ECAP process for three different fundamental routes mainly route A,route Bc,and route *** experiment is carried out on AZ61 alloy at lower temperature of 483 K up to two *** characterization is evaluated on unECAPed and ECAPed specimens for three *** grain size of the alloy is to be reduced from 66μm to 16μm,14.1μm and 10μm for route A routes Bc,and route R *** microhardness of the alloy is found to be 60 HV for as received *** microhardness of the alloy is increased to 71 HV,72 HV,and 74 HV for route A,route Bc,and route R *** properties of the AZ61 alloy are observed to be route R is providing maximum Ys,UTs,and percentage elongation than other route A and route *** fracture topography of the specimen is analyzed using three different routes for two passes.

关键词： ECAP Routes AZ61 alloy Microstructure Properties

Effect of equal channel angular pressing on AZ31 wrought magnesium alloys

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2013年第4期1卷 336-340页

作者： Avvari Muralidhar s.narendranath H.shivananda Nayaka Mechanical Engineering Department National Institute of Technology Karnataka(NITK)SurathkalSrinivasanagarMangalore 575025KarnatakaIndia

AZ31 wrought magnesium alloys are light weight materials which play an important role in order to reduces the environmental burdens in modern society because of its high strength to weight ratio,corrosion resistance,and stiffness and *** of this material are mainly in structural component i.e.,in constructions,automobile,aerospace,electronics and marine *** the present work,the microstructure characterization of the AZ31 alloys up to four ECAP passes at temperature of 573 K was observed for route *** grain size of the material was reduced from 31.8μm to 8μm after four ECAP *** properties of the alloy improved with increase in number of ECAP ***,X-ray diffraction analysis was carried out for as received and ECAP processed material.

关键词： ECAP AZ31 alloy Grain refinement Microstructure Mechanical properties XRD

Use of Discrete Wavelet Features and support Vector Machine for Fault Diagnosis of Face Milling Tool

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

structural Durability & Health Monitoring 2018年第2期12卷 111-127页

作者： C.K.Madhusudana N.Gangadhar Hemantha Kumar s.narendranath National Institute of Technology Karnataka SurathkalMangalorePin-575025India

This paper presents the fault diagnosis of face milling tool based on machine learning *** machining,spindle vibration signals in feed direction under healthy and faulty conditions of the milling tool are acquired.A set of discrete wavelet features is extracted from the vibration signals using discrete wavelet transform(DWT)*** decision tree technique is used to select significant features out of all extracted wavelet features.C-support vector classification(C-sVC)andν-support vector classification(ν-sVC)models with different kernel functions of support vector machine(sVM)are used to study and classify the tool condition based on selected *** the results obtained,C-sVC is the best model thanν-sVC and it can be able to give 94.5%classification accuracy for face milling of special steel alloy 42CrMo4.

关键词： Fault diagnosis face milling decision tree discrete wavelet transform support vector machine

Review on non-conventional machining of shape memory alloys

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Transactions of Nonferrous Metals society of China 2014年第1期24卷 12-21页

作者： M.MANJAIAH s.narendranath s.BAsAVARAJAPPA Department of Mechanical Engineering National Institute of Technology SurathkalKarnatakaIndia Department of studies in Mechanical Engineering University B.D.T.College of Engineering

shape memory alloys （sMAs） are the developing advanced materials due to their versatile specific properties such as pseudoelasticity, shape memory effect （sME）, biocompatibility, high specific strength, high corrosion resistance, high wear resistance and high anti-fatigue property. Therefore, the sMAs are used in many applications such as aerospace, medical and automobile. However, the conventional machining of sMAs causes serious tool wear, time consuming and less dimensional deformity due to severe strain hardening and pseudoelasticity. These materials can be machined using non-conventional methods such as laser machining, water jet machining （WJM） and electrochemical machining （ECM）, but these processes are limited to complexity and mechanical properties of the component. Electrical discharge machining （EDM） and wire EDM （WEDM） show high capability to machine sMAs of complex shapes with precise dimensions. The aim of this work is to present the consolidated references on the machining of sMAs using EDM and WEDM and subsequently identify the research gaps. In support to these research gaps, this work has also evolved the future research directions.

关键词： non-conventional machining electrical discharge machining wire EDM shape memory alloys

Wire electric discharge machining characteristics of titanium nickel shape memory alloy

在线全文

学校读者我要写书评

暂无评论

Transactions of Nonferrous Metals society of China 2014年第10期24卷 3201-3209页

作者： M.MANJAIAH s.narendranath s.BAsAVARAJAPPA V.N.GAITONDE Department of Mechanical Engineering National Institute of Technology Department of studies in Mechanical Engineering University B.D.T. College of Engineering Department of Industrial and Production Engineering B. V. B. College of Engineering and Technology

Ti Ni shape memory alloys（sMAs） have been normally used as the competent elements in large part of the industries due to outstanding properties, such as super elasticity and shape memory effects. However, traditional machining of sMAs is quite complex due to these properties. Hence, the wire electric discharge machining（WEDM） characteristics of Ti Ni sMA was studied. The experiments were planned as per L27 orthogonal array to minimize the experiments, each experiment was performed under different conditions of pulse duration, pulse off time, servo voltage, flushing pressure and wire speed. A multi-response optimization method using Taguchi design with utility concept has been proposed for simultaneous optimization. The analysis of means（ANOM） and analysis of variance（ANOVA） on signal to noise（s/N） ratio were performed for determining the optimal parameter levels. Taguchi analysis reveals that a combination of 1 μs pulse duration, 3.8 μs pulse off time, 40 V servo voltage, 1.8×105 Pa flushing pressure and 8 m/min wire speed is beneficial for simultaneously maximizing the material removal rate（MRR） and minimizing the surface roughness. The optimization results of WEDM of Ti Ni sMA also indicate that pulse duration significantly affects the material removal rate and surface roughness. The discharged craters, micro cracks and recast layer were observed on the machined surface at large pulse duration.

关键词： TiNi shape memory alloy wire electric discharge machining(WEDM) surface roughness material removal rate surface morphology

Recent advances in post autologous transplantation maintenance therapies in B-cell non-Hodgkin lymphomas

在线全文

学校读者我要写书评

暂无评论

World Journal of Transplantation 2015年第3期5卷 81-88页

作者： narendranath Epperla Timothy s Fenske Parameswaran N Hari Mehdi Hamadani Division of Hematology and Oncology Medical College of Wisconsin

Lymphomas constitute the second most common indication for high dose therapy(HDT) followed by autologous hematopoietic cell transplantation(autoHCT). The intent of administering HDT in these heterogeneous disorders varies from cure(e.g., in relapsed aggressive lymphomas) to disease control(e.g., most indolent lymphomas). Regardless of the underlying histology or remission status at transplantation, disease relapse remains the number one cause of post autoHCT therapy failure and mortality. The last decade has seen a proliferation of clinical studies looking at prevention of post auto-HCT therapy failure with various maintenance strategies. The benefit of such therapies is in turn dependent on disease histology and timing of transplantation. In relapsed, chemosensitive diffuse large B-cell lymphoma(DLBCL), although post auto-HCT maintenance rituximab seems to be safe and feasible, it does not provide improved survival outcomes and is not recommended. The preliminary results with anti- programmed death-1(PD-1) antibody therapy as post auto-HCT maintenance in DLBCL is promising but requires randomized validation. similarly in follicular lymphoma, maintenance therapies including rituximab following auto-HCT should be considered investigational and offered only on a clinical trial. Rituximab maintenance results in improved progressionfree survival but has not yet shown to improve overall survival in mantle cell lymphoma(MCL), but given the poor prognosis with post auto-HCT failure in MCL, maintenance rituximab can be considered on a caseby-case basis. Ongoing trials evaluating the efficacy of post auto-HCT maintenance with novel compounds(e.g., immunomodulators, PD-1 inhibitors, proteasome inhibitors and bruton's tyrosine kinase inhibitors) will likely change the practice landscape in the near future for B cell non-Hodgkin lymphomas patients following HDT and auto-HCT.

关键词： Mantle cell lymphoma Diffuse large B cell lymphoma Follicular lymphoma Autologous hematopoietic cell transplantation