检索结果-南通市图书馆

中国有色金属学会会刊：英文版 2012年第S3期22卷 624-628页

作者： Jun-Won KWON myoung-soo kang Sung-Ook YOON Yong-Jai KWON Sung-Tae HONG Dae-Il KIM Kwang-Hak LEE Jong-Dock SEO Jin-soo MOON Kyung-Sik HAN School of Materials Science and Engineering University of Ulsan School of Mechanical Engineering University of Ulsan Technical Research Laboratories Shin Young Co.Ltd. Automotive Parts Innovation Center Ulsan Technopark

AA5454-O aluminum alloy plates with thicknesses of 1.4 and 1.0 mm were friction-stir-lap-welded (FSLWed).The influences of the tool plunge depth and welding distance on surface appearance,macrostructure and mechanical properties of the FSLWed plates were experimentally *** tensile shear load of the FSLWed plates was compared with that of the adhesive-bonded ***-free FSLWed zones were successfully obtained in all the tool plunge depths and the welding *** FSLWed zones exhibited the relatively smooth surface *** all the FSLWed conditions,the FSLWed zone exhibited higher average hardness than the base *** addition,the upper plate exhibited a higher average hardness than the lower plate,although there was no special tendency in spite of the change in the tool plunge depth and the welding *** maximum tensile shear load of the FSLWed plates was much higher than that of the adhesive-bonded aluminum alloy ***,under the FSLW condition of the plunge depth of 1.8 mm and the welding distance of 40 mm,the tensile shear load of the FSLWed plate reached a level about 41% greater than that of the adhesive-bonded aluminum alloy *** addition,the maximum tensile shear load of the FSLWed plate was increased with the increase of the welding distance.

关键词： friction stir lap welding AA5450-O aluminum alloy tool plunge depth welding distance mechanical properties

Utilization of biomarkers for the prognostic prediction of cardiac arrest survivors using a multi-modal approach

在线全文

学校读者我要写书评

暂无评论

World Journal of Emergency Medicine 2024年第2期15卷 131-134页

作者： Changshin kang Yeonho You Jung soo Park Byeong Kwon Park Jae Kwang Lee Byung Kook Lee Department of Emergency Medicine College of MedicineChungnam National UniversityDaejeon 35015Republic of Korea Department of Emergency Medicine Chungnam National University HospitalDaejoen 35015Republic of Korea Department of Emergency Medicine Konyang University HospitalCollege of MedicineDaejeon 35015Republic of Korea Department of Emergency Medicine Chonnam National University Medical SchoolChonnam National University HospitalGwangju 61469Republic of Korea

International guidelines for post-cardiac arrest care recommend using multi-modal strategies to avoid the withdrawal of life-sustaining therapy(WLST)in patients with the potential for neurological recovery.[1]However,a clear methodology for multi-modal approaches has yet to be ***-specific enolase(NSE)is currently the only recommended biomarker,and the European Resuscitation Council(ERC)and the European SocietyofIntensiveCareMedicine(ESICM)have proposed a cutoff value of 60μg/L at 48 and/or 72 h after the return of spontaneous circulation(ROSC)as a multimodal prognostic tool for predicting poor neurological outcomes.

关键词： cardiac modal return

A Cu-Pd alloy catalyst with partial phase separation for the electrochemical CO_(2) reduction reaction

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第6期93卷 8-15,I0001页

作者： Gyeong Ho Han Jung Yong Seo Minji kang Myung-gi Seo Youngheon Choi soo Young Kim Sang Hyun Ahn School of Chemical Engineering and Material Science Chung-Ang UniversitySeoul 06974Republic of Korea Lotte Chemical Institute of Technology Daejeon 34110Republic of Korea Department of Materials Science and Engineering Korea UniversitySeoul 02841Republic of Korea

Cu catalysts can convert CO_(2) through an electrochemical reduction reaction into a variety of useful carbon-based ***,this capability provides an obstacle to increasing the selectivity for a single ***,we report a simple fabrication method for a Cu-Pd alloy catalyst for use in a membrane electrode assembly(MEA)-based CO_(2) electrolyzer for the electrochemical CO_(2) reduction reaction(ECRR)with high selectivity for CO *** the composition of the Cu-Pd alloy catalyst was fabricated at 6:4,the selectivity for CO increased and the production of multi-carbon compounds and hydrogen is *** a Cu-Pd alloy catalyst with 6:4 ratio as the cathode of the MEAbased CO_(2) electrolyzer showed a CO faradaic efficiency of 92.8%at 2.4 V_(cell).We assumed that these results contributed from the crystal planes on the surface of the Cu-Pd *** phases of the Cu-Pd alloy catalyst were partially separated through annealing to fabricate a catalyst with high selectivity for CO at low voltage and C_(2)H_4 at high *** results of CO-stripping testing confirmed that when Cu partially separates from the lattice of the Cu-Pd alloy,the desorption of~*CO is suppressed,suggesting that C-C coupling reaction is favored.

关键词： Cu-Pd catalyst Electrodeposition Electrochemical carbon dioxide reduction Partial phase separation Membrane electrode assembly-based electrolyzer

Potential industrial applications of photo/electrocatalysis: Recent progress and future challenges

在线全文

学校读者我要写书评

暂无评论

Green Energy & Environment 2024年第5期9卷 859-876页

作者： Jinhao Li Jing Ren Shaoquan Li Guangchao Li Molly Meng-Jung Li Rengui Li Young soo kang Xiaoxin Zou Yong Luo Bin Liu Yufei Zhao State Key Laboratory of Chemical Resource Engineering Beijing University of Chemical TechnologyBeijing100029China Quzhou Institute for Innovation in Resource Chemical Engineering Quzhou324000China State Key Laboratory of Organic-Inorganic Composites Beijing University of Chemical TechnologyBeijing100029China Department of Applied Physics The Hong Kong Polytechnic UniversityHong Kong999077China State Key Laboratory of Catalysis Dalian Institute of Chemical PhysicsChinese Academy of SciencesDalian National Laboratory for Clean EnergyZhongshan Road 457Dalian116023China Environmental and Climate Technology Track of Korea Institute of Energy Korea Institute of Energy TechnologyNaju-siJeollanam do58217Republic of Korea State Key Laboratory of Inorganic Synthesis and Preparative Chemistry College of ChemistryJilin UniversityChangchun130012China

Nowadays,the rapid development of the social economy inevitably leads to global energy and environmental *** this reason,more and more scholars focus on the development of photocatalysis and/or electrocatalysis technology for the advantage in the sustainable production of high-value-added products,and the high efﬁciency in pollutants *** there is plenty of outstanding research has been put forward continuously,most of them focuses on catalysis performance and reaction mechanisms in laboratory *** industrial application of photo/electrocatalytic processes is still a challenge that needs to be overcome by social *** this regard,this review comprehensively summarized several explorations in theﬁeld of photo/electrocatalytic reduction towards potential industrial applications in recent *** attention is paid to the successful attempts and the current status of photo/electrocatalytic water splitting,carbon dioxide conversion,resource utilization from waste,etc.,by using advanced *** key problems and challenges of photo/electrocatalysis in future industrial practice are also discussed,and the possible development directions are also pointed out from the industry view.

关键词： Photocatalysis Electrocatalysis Industrial applications H2 economy

Enhancement of porcine in vitro embryonic development through luteolin‑mediated activation of the Nrf2/Keap1 signaling pathway

在线全文

学校读者我要写书评

暂无评论

Journal of Animal Science and Biotechnology 2024年第2期15卷 600-613页

作者： Se-Been Jeon Pil-soo Jeong Min Ju Kim Hyo-Gu kang Bong-Seok Song Sun-Uk Kim Seong-Keun Cho Bo-Woong Sim Futuristic Animal Resource&Research Center(FARRC) Korea Research Institute of Bioscience and Biotechnology(KRIBB)Cheongju 28116Republic of Korea Department of Animal Science College of Natural Resources&Life SciencePusan National UniversityMiryang 50463Republic of Korea Department of Animal Science and Biotechnology College of Agriculture and Life ScienceChungnam National UniversityDaejeon 34134Republic of Korea Department of Functional Genomics University of Science and TechnologyDaejeon 34113Republic of Korea Department of Animal Science Life and Industry Convergence Research Institute(RICRI)College of Natural Resources&Life SciencePusan National UniversityMiryang 50463Republic of Korea

Background Oxidative stress,caused by an imbalance in the production and elimination of intracellular reactive oxygen species(ROS),has been recognized for its detrimental effects on mammalian embryonic ***(Lut)has been documented for its protective effects against oxidative stress in various ***,its specific role in embryonic development remains *** study aims to investigate the influence of Lut on porcine embryonic development and to elucidate the underlying *** After undergoing parthenogenetic activation(PA)or in vitro fertilization,embryos supplemented with 0.5μmol/L Lut displayed a significant enhancement in cleavage and blastocyst formation rates,with an increase in total cell numbers and a decrease in the apoptosis rate compared to the *** on D2 and D6 revealed that embryos with Lut supplementation had lower ROS levels and higher glutathione levels compared to the ***,Lut supplementation significantly augmented mitochondrial content and membrane ***,activation of the Nrf2/Keap1 signaling pathway was observed in embryos supplemented with Lut,leading to the upregulation of antioxidant-related gene transcription *** further validate the relationship between the Nrf2/Keap1 signaling pathway and effects of Lut in porcine embryonic development,we cultured PA embryos in a medium supplemented with brusatol,with or without the inclusion of *** positive effects of Lut on developmental competence were negated by brusatol *** Our findings indicate that Lut-mediated activation of the Nrf2/Keap1 signaling pathway contributes to the enhanced production of porcine embryos with high developmental competence,and offers insight into the mechanisms regulating early embryonic development.

关键词： Luteolin Mitochondrial function Nrf2/Keap1 signaling pathway Oxidative stress Porcine embryo development

Integration of earth-abundant cocatalysts for high-performance photoelectrochemical energy conversion

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第1期88卷 336-355,I0008页

作者： Joonhee Ma Sang Hyun Ahn soo Young Kim Department of Materials Science and Engineering Korea UniversitySeoul 02841Republic of Korea School of Chemical Engineering and Materials Science Chung-Ang University84 Heukseok-roDongjak-guSeoul 06974Republic of Korea

Photoelectrochemical(PEC)energy conversion has emerged as a promising and efficient approach to sustainable energy harvesting and *** utilizing semiconductor photoelectrodes,PEC devices can harness solar energy and drive electrochemical reactions such as water splitting or carbon dioxide(CO_(2))reduction to generate clean fuels and value-added ***,PEC energy conversion faces several challenges such as high overpotential,sluggish reaction kinetics,charge carrier recombination,and stability issues,which limit its practical ***,significant research has been conducted to improve the overall conversion efficiency of PEC *** particularly promising approach is the use of cocatalysts,which involves introducing specific cocatalysts onto the photoelectrode surface to promote charge separation,improve reaction kinetics,and reduce the overpotential,thereby enhancing the overall performance of PEC energy *** review provides a comprehensive overview of the recent developments in the earth-abundant cocatalysts for PEC water splitting and CO_(2) *** main earth-abundant catalysts for the PEC water splitting include transition-metal dichalcogenide(TMD)-based materials,metal phosphides/carbides,and metal oxides/***,PEC-CO_(2)RR was divided into C_(1) and C_(2+)based on the final product since various products could be produced,focusing on diverse earth-abundant materials-based *** addition,we provide and highlight key advancements achieved in the very recent reports on novel PEC system design engineering with ***,the current problems associated with PEC systems are discussed along with a suggested direction to overcome these obstacles.

关键词： Solar energy Photo-electrochemical Water splitting CO_(2)reduction Cocatalysts

Transparent high-performance piezoceramics through pressureless sintering

在线全文

学校读者我要写书评

暂无评论

Journal of Advanced Ceramics 2024年第5期13卷 561-567页

作者： Hye-Lim Yu Woo-Seok kang Ju-Hyeon Lee Temesgen Tadeyos Zate Young-Jin Lee Bo-Kun Koo Dong-Jin Shin Min-soo Kim soon-Jong Jeong Young Ghyu Ahn Wook Jo Department of Material Science and Engineering Ulsan National Institute of Science and TechnologyUlsan 44919Republic of Korea Energy Conversion Research Center Korea Electrotechnology Research InstituteChangwon 51543Republic of Korea MLCC Development Team Component Biz.UnitSamsung Electro-Mechanics Co.Ltd.Suwon 16674Republic of Korea

Piezoelectricity offers an electromechanical coupling that is widely utilized in transducer *** has been a consistent demand for transparent piezoelectric materials for optoelectrical ***,despite the inherent tradeoff between the transparency and the piezoelectricity,numerous strategies have been explored to develop the transparent piezoelectric ***,the most transparent piezoelectric materials developed to date is either a single crystal or materials that achieve transparency via hot-press sintering,limiting its industrial ***,we introduce a novel piezoelectric material that ensures transparency through co-doping and pressureless sintering of polycrystalline *** this study,we employed a compositional optimization approach to enhance the synergistic effect between the transparency and the piezoelectric properties of 0.71Pb(Mg_(1/3)Nb_(2/3))O_(3)–0.29PbTiO_(3)(PMN–0.29PT)*** utilizing the tape casting process for mass production and large-area manufacturing,our Pb_(0.913)La_(0.0145)Sm_(0.0145)(Mg_(1/3)Nb_(2/3))_(0.71)Ti_(0.29)O_(3)(TP2.9)ceramics exhibited over 60%transparency and large piezoelectric coefficient(d33)of 1104 pC/*** material holds considerable promise for a wide range of industrial applications in both the optical and electronic domains.

关键词： piezoelectric ceramics transparency pressureless sintering co-doping tape casting

Influences of tool plunge speed and tool plunge depth on friction spot joining of AA5454-O aluminum alloy plates with different thicknesses

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

中国有色金属学会会刊：英文版 2012年第S3期22卷 629-633页

作者： Sung-Ook YOON myoung-soo kang Yong-Jai KWON Sung-Tae HONG Dong-Hwan PARK Kwang-Hak LEE Chang-Yong LIM Jong-Dock SEO School of Materials Science and Engineering University of Ulsan School of Mechanical Engineering University of Ulsan Institute of E-Vehicle Technology University of Ulsan Technical Research Laboratories Shin Young Co.Ltd.

AA5454-O aluminum alloy plates with the thicknesses of 1.4 and 1.0 mm were friction-spot-joined (FSJed).The plunge speed of the joining tool was changed in a range of 100 500 mm/min under a constant rotation speed of 500 r/*** plunge depth was ranged from 1.6 mm to 2.2 *** tool plunge speed did not make a remarkable effect on the surface appearance and macro-structure of the FSJed *** average hardness of the FSJed zone was greater than or equal to that of the base ***,there was no remarkable tendency in the average hardness change of the FSJed zone in spite of the variation in the tool plunge speed and tool plunge *** increase of the tool plunge depth resulted in the increase of the tensile shear ***,the change of the tool plunge speed did not lead to the remarkable variation in the tensile shear load of the FSJed *** was noteworthy that the FSJed plate exhibited the highest tensile shear load of about 4.0 kN.

关键词： friction spot joining AA5454-O aluminum alloy plunge speed plunge depth mechanical property

Intelligent structured nanocomposite adhesive for bioelectronics and soft robots

在线全文

学校读者我要写书评

暂无评论

Nano Research 2024年第2期17卷 534-549页

作者： Yeon soo Lee Min-Seok Kim Da Wan Kim Changhyun Pang School of Chemical Engineering Sungkyunkwan University(SKKU)Suwon 16419Republic of Korea Mechanical Metrology Group Korea Research Institute of Standards and ScienceDaejeon 34113Republic of Korea Department of Electronic Engineering Korea National University of TransportationChungbuk 27469Republic of Korea Samsung Advanced Institute for Health Sciences and Technology Sungkyunkwan University(SKKU)Suwon 16419Republic of Korea

The remarkable functionality of biological systems in detecting and adapting to various environmental conditions has inspired the design of the latest electronics and robots with advanced *** review focuses on intelligent bio-inspired strategies for developing soft bioelectronics and robotics that can accommodate nanocomposite adhesives and integrate them into biological *** underlying principles of the material and structural design of nanocomposite adhesives were investigated for practical applications with excellent functionalities,such as soft skin-attachable health care sensors,highly stretchable adhesive electrodes,switchable adhesion,and untethered soft *** addition,we have discussed recent progress in the development of effective fabrication methods for micro/nanostructures for integration into devices,presenting the current challenges and prospects.

关键词： biomimetics bio-adhesive switchable adhesion bioelectronics nanocomposite soft robotics

Direct 4D printing of functionally graded hydrogel networks for biodegradable,untethered,and multimorphic soft robots

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Extreme Manufacturing 2024年第2期6卷 407-416页

作者： soo Young Cho Dong Hae Ho Sae Byeok Jo Jeong Ho Cho Department of Chemical and Biomolecular Engineering Yonsei UniversitySeoul 03722Republic of Korea Department of Mechanical Engineering Virginia TechBlacksburgVA 24061United States of America School of Chemical Engineering Sungkyunkwan UniversitySuwon 16419Republic of Korea SKKU Institute of Energy Science and Technology(SIEST) Sungkyunkwan UniversitySuwon 16419Republic of Korea

Recent advances in functionally graded additive manufacturing(FGAM)technology have enabled the seamless hybridization of multiple functionalities in a single *** robotics can become one of the largest beneficiaries of these advances,through the design of a facile four-dimensional(4D)FGAM process that can grant an intelligent stimuli-responsive mechanical functionality to the printed ***,we present a simple binder jetting approach for the 4D printing of functionally graded porous multi-materials(FGMM)by introducing rationally designed graded multiphase feeder *** graded cross-linking agents gradually form stable porous network structures within aqueous polymer particles,enabling programmable hygroscopic deformation without complex mechanical ***,a systematic bed design incorporating additional functional agents enables a multi-stimuli-responsive and untethered soft robot with stark stimulus *** biodegradability of the proposed 4D-printed soft robot further ensures the sustainability of our approach,with immediate degradation rates of 96.6%within 72 *** proposed 4D printing concept for FGMMs can create new opportunities for intelligent and sustainable additive manufacturing in soft robotics.

关键词： intelligent and sustainable additive manufacturing multi-material four-dimensional printing untethered soft robot multi-stimuli-responsive soft robot biodegradable soft robotics