检索结果-南通市图书馆

Theoretical analysis of the conical premixed flame response to upstream velocity disturbances considering flame speed development effects

引用

Propulsion and Power Research 2017年第1期6卷 70-78页

作者： Ghazaleh Esmaeelzade mohammad Reza Khani Rouzbeh Riazi mohammad hossein sabour Faculty of New Sciences and Technologies University of Tehran TehranIran Department of Mechanical Engineering Iran University of Science and TechnologyTehranIran

The effect of upstream velocity pertuibations on the response of a premixed flame was investigated in terms of the flame transfer function dependency on excitation *** this study,the assumption of constant flame speed was extended and the effect of flame speed development was considered;i.e.,the flame speed would grow with the time after ignition or with the distance from a *** the present study,the kinematics of a conical flame was investigated by linearization of the front tracking equation of flame to uniform and convected fluctuations of the flow velocity and the response was compared with that of a V-shaped flame and the experimental data in the previous *** results show that the effect of flame speed development could influence a decreasing gain and increase the phase of the flame response to the uniform velocity oscillations in low and moderate *** the variations in the gain of flame response upon normalized frequency,show that a conical flame has lower values than the *** other woods,these flames might be less susceptible to combustion instabilities than the ***,the variations in phase of the V-flames responses,which show a quasi-linear behavior with normalized frequency,have higher values than the saturated behavior in phase of the conical flame ***,considering that the flame speed development induces an increase in the gain and phase of the conical flame response to the convected velocity oscillations in certain frequencies;because the developed flame front has longer length in comparison to the flame front in constant flame speed ***,the flame length may be longer than convective wavelength and the heat release would be generated in different points of the flame;consequently the flow oscillations might exert a stronger impact on the unsteady heat release fluctuations.

关键词： Combustion instability Kinematic premixed flame model Flame response Flow oscillations Flame speed development effect

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Special Issue:International Conference on Sustainable Energy Sources,Technologies and Systems 2023(ICSESTS-2023)

引用

Clean Energy 2024年第3期8卷 136-137页

作者： Ravinder Kumar mohammad hossein Ahmadi School of Mechanical Engineering Lovely Professional UniversityPhagwra-144411PunjabIndia Faculty of Mechanical Engineering Shahrood University of TechnologyShahroodIran

The Division of Research and Development at Lovely Professional University,Punjab organized the International Conference on Sustainable Energy Sources,Technologies and Systems 2023(ICSESTS-2023),which took place on 3-... 详细信息

关键词： solar energy storage wind energy geothermal hydropower biofuels batteries

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Multidisciplinary design optimization of a dual-spin guided vehicle

引用

Defence Technology（防务技术） 2024年第7期37卷 133-148页

作者： Jalal Karimi mohammad Reza Rajabi Seyed hossein Sadati Seyed Mahid hosseini Department of Aerospace Engineering Malek Ashtar University of TechnologyTehranIran

In this research,a Multidisciplinary Design Optimization approach is proposed for the dual-spin guided flying projectile design considering external and internal parts of the body as design *** this way,a parametric formulation is *** related disciplines,including structure,aerodynamics,guidance,and control are *** total mass,maximum aerodynamic control effectiveness,minimum miss distance,maximum yield stress in all subsystems,controllability and gyroscopic stability constraints are some of objectives/constraints taken into *** problem is formulated in All-At-Ones Multidisciplinary Design Optimization approach structure and solved by Simulated Annealing and minimax *** optimal configurations are evaluated in various *** resulted optimal configurations have met all design objectives and constraints.

关键词： Flying projectile optimal design All-at-ones multidisciplinary optimization Structure discipline Guidance and control discipline Aerodynamic discipline

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Analyzing the Interplay of Sintering Conditions on Microstructure and Hardness in Indirect Additive Manufacturing of 17-4PH Stainless Steel

引用

Acta Metallurgica Sinica(English Letters) 2024年第9期37卷 1611-1620页

作者： Erika Lannunziata mohammad hossein Mosallanejad Manuela Galati Gabriele Piscopo Abdollah Saboori Integrated Additive Manufacturing Center Department of Management and Production EngineeringPolitecnico di TorinoCorso Duca Degli Abruzzi 2410129TurinItaly

Indirect additive manufacturing(AM)methods have recently attracted attention from researchers thanks to their great potential for cheap,straightforward,and small-scale production of metallic *** diffusion additive manufacturing(ADAM),a variant of indirect AM methods,is a layer-wise indirect AM process recently developed based on fused deposition modeling and metal injection ***,there is still limited knowledge of the process conditions and material properties fabricated through this process,where sintering plays a crucial role in the final consolidation of ***,this research,for the first time,systematically investigates the impact of various sintering conditions on the shrinkage,relative density,microstructure,and hardness of the 17-4PH ADAM *** this reason,as-washed samples were sintered under different time-temperature *** sample density was evaluated using Archimedes,computed tomography,and image analysis *** outcomes revealed that sintering variables significantly impacted the density of brown 17-4PH Stainless Steel *** results indicated more than 99% relative densities,higher than the value reported by Markforged Inc.(~96%).Based on parallel porosities observed in the computed tomography results,it can be suggested that by modifying the infill pattern during printing,it would be possible to increase the final relative *** microhardness of the sintered samples in this study was higher than that of the standard sample provided by Markforged *** at 1330℃ for 4 h increased the density of the printed sample without compromising its mechanical *** to X-ray diffraction analysis,the standard sample provided by Markforged ***“1330℃—4 h”one had similar stable phases,although copper-rich intermetallics were more abundant in the microstructure of reference *** study is expected to facilitate the adoption of indirect metal AM methods by different sector

关键词： Indirect additive manufacturing Atomic diffusion additive manufacturing 17-4PH stainless steel Computed tomography Sintering

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Assessment of electrostatic discharge sensitivity of nitrogen-rich heterocyclic energetic compounds and their salts as high energy-density dangerous compounds:A study of structural variables

引用

Defence Technology（防务技术） 2024年第9期39卷 15-22页

作者： mohammad hossein Keshavarz Sedigheh Heydari Bani Reza Bakhtiari Seyyed Hesamodin hosseini Faculty of Applied Sciences Malek Ashtar University of TechnologyIsfahan 177415875Iran

Nitrogen-rich heterocyclic energetic compounds(NRHECs)and their salts have witnessed widespread synthesis in recent *** substantial energy-density content within these compounds can lead to potentially dangerous explosive reactions when subjected to external stimuli such as electrical ***,developing a reliable model for predicting their electrostatic discharge sensitivity(ESD)becomes *** study proposes a novel and straightforward model based on the presence of specific groups(-NH_(2) or-NH-,-N=N^(+)-O^(-)and-NNO_(2),-ONO_(2) or-NO_(2))under certain conditions to assess the ESD of NRHECs and their salts,employing interpretable structural *** a comprehensive dataset comprising 54 ESD measurements of NRHECs and their salts,divided into 49/5 training/test sets,the model achieves promising *** Root Mean Square Error(RMSE),Mean Absolute Error(MAE),and Maximum Error for the training set are reported as 0.16 J,0.12 J,and 0.5 J,***,the ratios RMSE(training)/RMSE(test),MAE(training)/MAE(test),and Max Error(training)/Max Error(test)are all greater than 1.0,indicating the robust predictive capabilities of the *** presented model demonstrates its efficacy in providing a reliable assessment of ESD for the targeted NRHECs and their salts,without the need for intricate computer codes or expert involvement.

关键词： Electrostatic discharge sensitivity Heterocyclic energetic compounds containing azole compound Interpretable structural parameter Safety

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Performance comparison of machine learning algorithms for maximum displacement prediction in soldier pile wall excavation

引用

Underground Space 2024年第3期16卷 301-313页

作者： Danial Sheini Dashtgoli mohammad hossein Dehnad Seyed Ahmad Mobinipour Michela Giustiniani Department of Mathematics Informaticsand GeosciencesUniversity of TriesteTrieste 34127Italy National Institute of Oceanography and Applied Geophysics-OGS Borgo Grotta Gigante 42/CTriesteSgonico 34010Italy Department of Civil Engineering University of QomQom ***Iran

One of the common excavation methods in the construction of urban infrastructures as well as water and wastewater facilities is the excavation through soldier pile *** maximum lateral displacement of pile wall is one of the important variables in controlling the stability of the excavation and its adjacent ***,the application of machine learning methods is widely used in engineering sciences due to its low cost and high speed of *** paper utilized three intelligent machine learning algorithms based on the excavation method through soldier pile walls,namely eXtreme gradient boosting(XGBoost),least square support vector regressor(LS-SVR),and random forest(RF),to predict maximum lateral displacement of pile *** results showed that the implemented XGBoost model performed excellently and could make predictions for maximum lateral displacement of pile walls with the mean absolute error of 0.1669,the highest coefficient of determination 0.9991,and the lowest root mean square error *** the LS-SVR,and RF models were less accurate than the XGBoost model,they provided good prediction results of maximum lateral displacement of pile walls for numerical ***,a sensitivity analysis was performed to determine the most effective parameters in the XGBoost *** analysis showed that soil elastic modulus and excavation height had a strong influence on of maximum lateral displacement of pile wall prediction.

关键词： Soldier pile wall Lateral displacements XGBoost Machine learning Artificial intelligence

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Improvement of Surface Mechanical and Tribological Characteristics of L-PBF Processed Commercially Pure Titanium through Ultrasonic Impact Treatment

引用

Acta Metallurgica Sinica(English Letters) 2024年第6期37卷 1034-1046页

作者： Iman Ansarian Reza Taghiabadi Saeid Amini mohammad hossein Mosallanejad Luca Iuliano Abdollah Saboori Department of Materials Science and Metallurgy Imam Khomeini International University(IKIU)QazvinIran Department of Mechanical Engineering University of KashanKashanIran Integrated Additive Manufacturing Center Department of Management and Production EngineeringPolitecnico di TorinoCorso Duca Degli Abruzzi 2410129TurinItaly

Multi-pass ultrasonic impact treatment(UIT)was applied to modify the microstructure and improve the mechanical and tribological characteristics at the near-surface region of commercially pure Ti(CP-Ti)specimens produced by the laser powder bed fusion(L-PBF)*** considerably refined the L-PBF process-related acicular martensites(α′-M)and produced a well-homogenized and dense surface microstructure,where the porosity content of 1-,3-,and 5-pass UITed samples was reduced by 43,60,and 67%,*** UITed samples showed an enhancement in their near-surface mechanical properties up to a depth of about 300μ*** nanoindentation results for the 3-pass UITed sample revealed an increase of about 53,45,and 220%in its nanohardness,H/E_(r),and H_(3)/E_(r)^(2)indices,*** stylus profilometry results showed that performing the UIT removed the L-PBF-related features/defects and offered a smooth *** roughness average(R_(a))and the skewness(R_(sk))of the 3-pass UITed sample were found to be lower than those of the L-PBFed sample by 95 and 223%,*** the UIT also enhanced the material ratio,where the maximum load-bearing capacity(~100%)in as-L-PBFed(as-built)and 3-pass UITed samples was obtained at 60-and 10-µm depths,*** tribological investigations showed that applying the UIT resulted in a significant reduction of wear rate and average coefficient of friction(COF)of *** instance,under the normal pressures of 0.05 and 0.2 MPa,the wear rate and COF of the 3-pass UITed sample were lower than those of the L-PBFed sample by 65 and 58%,and 20 and 17%,respectively.

关键词： Laser powder bed fusion Ultrasonic impact treatment Commercially pure Ti(CP-Ti) Surface mechanical properties Tribological properties

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Er_(2)TiO_(5)@Ag nanocomposites:Enhanced photocatalysis and bacteria inactivation,and cytotoxicity

引用

Journal of Rare Earths 2024年第5期42卷 851-858,I0002页

作者： Mehdi Nazeri hossein Sedaghat Reza Rafiei mohammad Amin Farzin Seyed Mostafa hosseinpour Mashkani Department of Parasitology and Mycology Kashan University of Medical SciencesKashanIran Department of Microbiology Kashan University of Medical SciencesKashanIran General Medicine Student School of MedicineKashan University of Medical SciencesKashanIran Student Research Committee Kashan University of Medical SciencesKashanIran Institute for Biomedical Materials and Devices School of Mathematical and Physical SciencesFaculty of ScienceUniversity of Technology SydneyNSW2007Australia

In this study,we successfully synthesized Er_(2)TiO_(5)@Ag nanocomposites(NCPs) using the ultrasonicmediated sol-gel technique to create a multifunctional material with enhanced photocatalytic and antibacterial *** visible light photocatalytic activities of Er_(2)TiO_(5) nanoparticles(NPs) and Er_(2)TiO_(5)@Ag NCPs were systematically evaluated under various conditions,including different concentrations of Basic Blue 41(BB 41) dye and *** results reveal a remarkable improvement in the photocatalytic degradation efficiency of Er_(2)TiO_(5)@Ag NCPs(95%) compared to Er_(2)TiO_(5) NPs(80%).Furthermore,the antibacterial efficacy of Er_(2)TiO_(5) NPs and Er2TiO_5@Ag NCPs were extensively examined against Gram-positive and Gram-negative ***,Er_(2)TiO_(5)@Ag NCPs exhibit significantly higher minimum bactericidal concentration(MBC) values compared to Er_(2)TiO_(5) *** antibacterial effect of Er_(2)TiO_(5)@Ag NCPs is particularly pronounced against *** and Pseudomonas aeruginosa,while demonstrating moderate effects on Escherichia coli and Enterococcus *** assess the biocompatibility of the synthesized materials,we investigated their internalization by MCF-7 ***,both Er_(2)TiO_(5) NPs and Er_(2)TiO_(5)@Ag NCPs are found to be effectively internalized by the cells,suggesting their potential application in biomedical ***,our study unveils the exceptional potential of Er_(2)TiO_(5)@Ag NCPs as a dual-action solution,simultaneously possessing enhanced photocatalytic efficiency and potent antibacterial *** multifunctional nanocomposite not only outperforms Er_(2)TiO_(5) and Ag but also paves the way for innovative applications in sustainable environmental remediation and advanced biomedical technologies,promising a brighter and cleaner future.

关键词： Rare earth catalysis Nanocomposite Er_(2)TiO_(5)@Ag Antibacterial activity Photocatalysis Cytotoxicity

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Using Longitudinal Fins to Improve the Melting Performance of Stearic Acid in Thermal Energy Storage Devices

引用

Journal of Thermal Science 2024年第5期33卷 1672-1687页

作者： YAN Suying LIU Yiran AO Ci ZHAO Xiaoyan ZHANG Na ZHANG Ruiying AHMADI mohammad hossein School of Energy and Power Engineering Inner Mongolia University of TechnologyHohhot 010051China Institute of Engineering Thermophysics Chinese Academy of SciencesBeijing 100190China University of Chinese Academy of Sciences Beijing 100190China School of Materials Science and Engineering Inner Mongolia University of TechnologyHohhot 010051China Faculty of Mechanical Engineering Shahrood University of TechnologyShahroodIran

The heat transfer efficiency of a thermal energy storage unit(TESU)can be improved by the addition of novel longitudinal fins.A series of TESUs are analyzed using the finite volume method(FVM)to determine the effect of fin angle on the heat transfer *** the fin angle increases,the TES rate first increases,then decreases,reaching a maximum rate at 60°,where the melting time is less by 30.9%,28.58%,21.99%,9.02%,and 18.1%than at 0°,15°,30°,45°,and 80°,*** addition,it is found that the melting time of the phase change material is significantly greater at the bottom of the *** time percentage of this stage decreases as the fin angle increases through these percentages by 7%,14%,23%,33%,and 20%,***,the response surface methodology(RSM)is applied to optimize the longitudinal fin by minimizing the total melting *** analysis concludes that a fin angle of 58.68°reduces the complete melting time of the stearic acid by 44%below the time at 0°.These findings fill a gap in knowledge of the effect on melting performance of the design angle of longitudinal fins and provide a reference for the design of horizontally placed longitudinal finned thermal energy storage units.

关键词： thermal energy storage melting rate enhancement longitudinal fins fin angle phase change materials

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Insight into small eyes: a practical description from phenotypes presentations to the management

引用

International Journal of Ophthalmology(English edition) 2024年第2期17卷 380-391页

作者： Sana Niazi Sorcha NíDhubhghaill Farideh Doroodgar Zisis Gatzioufas mohammad hossein Dehghan Translational Ophthalmology Research Center Tehran University of Medical SciencesTehran ***Iran Antwerp University Hospital Edegem 2650Belgium Faculty of Health Sciences Antwerp UniversityAntwerpen 2000EdegemBelgium Negah Aref Ophthalmic Research Center Shahid Beheshti University of Medical SciencesTehran 16666Iran University Eye Hospital Basel Basel 4031Switzerland

This narrative review aimed to have an algorithmic approach to microphthalmos by a systematic *** definition can be related to a number of special *** the more challenging cases of complex microphthalmos,relative anterior microphthalmos,and nanophthalmos,the surgeon can approach these cases more safely if they have a deep understanding of the anatomical variations and ideal formulae for intraocular lens computation and knows how to avoid intra-and post-operative *** this article,we review the criteria by which we recognize and describe pre-,intra-,and post-operative considerations,as well as discuss the ideal intraocular lenses for microphthalmos,given the intricate varieties of small eye phenotypes.

关键词： microphthalmos nanophthalmos lenses intraocular anterior chamber axial length eye cataract microcornea syndrome

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：