检索结果-南通市图书馆

Characterizing Spatial Variability of Soil Textural Fractions and Fractal Parameters Derived from Particle Size Distributions

引用

Pedosphere 2019年第2期29卷 224-234页

作者： Meysam mohammadi Mahmoud SHABANPOUR mohammad hossein mohammadi Nasser DAVATGAR Department of Soil Science Faculty of Agriculture University of Guilan Department of Soil Science Faculty of Agricultural Engineering and Technology University of Tehran Department of Soil Science Research Institute of Soil and Water

Soil particle size distribution(PSD) is a fundamental physical property affecting other soil properties. Characterizing spatial variability of soil texture is very important in environmental research. The objectives of this work were: 1) to partition PSD of 75 soil samples, collected from a flat field in the University of Guilan, Iran, into two scaling domains using a piecewise fractal model to evaluate the relationships between fractal dimensions of scaling domains and soil clay, silt, and sand fractions and 2) to assess the potential of fractal parameters as an index used in a geostatistical approach reflecting the spatial variability of soil texture. Features of PSD of soil samples were studied using fractal geometry, and geostatistical techniques were used to characterize the spatial variability of fractal and soil textural parameters. There were two scaling domains for the PSD of soil samples. The fractal dimensions of these two scaling domains(D_1 and D_2) were then used to characterize different ranges of soil particle sizes and their relationships to the soil textural parameters. There was a positive correlation between D_1 and clay content(R^2= 0.924), a negative correlation between D_1 and silt content(R^2= 0.801), and a negative correlation between D_2 and sand content(R^2= 0.913). The geometric mean diameter of soil particles had a negative correlation with D_1(R^2= 0.569) and D_2(R^2= 0.682). Semivariograms of fractal dimensions and soil textural parameters were calculated and the maps of spatial variation of D_1 and D_2 and soil PSD parameters were provided using ordinary kriging. The results showed that there were also spatial correlations between D_1 and D_2 and particle size *** to the semivariogram models and validation parameters, the fractal parameters had powerful spatial structure and could better describe the spatial variability of soil texture.

关键词： fractal dimension geometric mean diameter geostatistical approach physical property semivariogram model statistical correlation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Anti-proliferative effects of a small molecule inhibitor of CDKAT7519 on chronic myeloid leukemia (CML) cells through haltingthe transition of cells from G2/M phase of the cell cycle

引用

BIOCELL 2020年第2期44卷 183-192页

作者： MASOUMEH OGHABI AVA SAFAROGHLI-AZAR ATIEH POURBAGHERI-SIGAROODI mohammad SAYYADI MOHSEN HAMIDPOUR mohammad hossein mohammadi DAVOOD BASHASH Department of Hematology and Blood Banking School of Allied Medical SciencesShahid Beheshti University of Medical SciencesTehranIran Student Research Committee Department of Hematology and Blood BankingSchool of Allied Medical SciencesShahid Beheshti University of Medical SciencesTehranIran School of Allied Medical Sciences Arak University of Medical SciencesArakIran

Pathogenesis of chronic myeloid leukemia(CML)has mostly been studied with regard to the oncogenic role of BCR/ABL fusion,however,recent disclosures have declared that the challenges with the treatment of CML patients would not be resolved until the role of other aberrancies is *** the involvement of cyclin-dependent kinases(CDKs)in the pathogenesis of CML,the present study aimed to investigate the effects of a multi-CDK inhibitor AT7519 on BCR/ABL-harboring CML-derived K562 *** results showed that AT7519 effectively reduced the survival of K562 and induced its anti-proliferative effect through the induction of G2/M arrest due to elevated p21 and *** resulting data also revealed that either direct or indirect suppression of c-Myc using specific c-Myc inhibitor 10058-F4 and selective PI3K inhibitor CAL-101 resulted in a superior cytotoxicity,suggesting that the activation of PI3K pathway could attenuate antileukemic effects of the inhibitor,at least partly,through a c-Mycdependent *** the best of our knowledge,to date,no study has addressed the effect of autophagy on CML cell response to AT7519,and,herein,we proposed for the first time that the suppression of autophagy boosted AT7519 cytotoxicity against ***,we suggested that selective CDK inhibitor AT7519 exerted antileukemic effect against CML cells and propose a novel therapeutic application for the inhibitor either as a single agent or in combination with c-Myc and/or PI3K inhibitors.

关键词： Chronic myeloid leukemia (CML) Cyclin-dependent kinase (CDK) AT7519 Autophagy PI3K c-Myc

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Special Issue: International Conference on Sustainable Energy Sources, Technologies and Systems 2023 (ICSESTS-2023)

引用

CLEAN ENERGY 2024年第3期8卷 136-137页

作者： Kumar, Ravinder Ahmadi, mohammad hossein Lovely Profess Univ Sch Mech Engn Phagwra 144411 Punjab India Shahrood Univ Technol Fac Mech Engn Shahrood Iran

Guest editorial introducing the special issue on the International Conference on Sustainable Energy Sources, Technologies and Systems 2023.

关键词： solar energy storage wind energy geothermal hydropower biofuels batteries

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Multidisciplinary design optimization of a dual-spin guided vehicle

引用

Defence Technology（防务技术） 2024年第7期37卷 133-148页

作者： Jalal Karimi mohammad Reza Rajabi Seyed hossein Sadati Seyed Mahid hosseini Department of Aerospace Engineering Malek Ashtar University of TechnologyTehranIran

In this research,a Multidisciplinary Design Optimization approach is proposed for the dual-spin guided flying projectile design considering external and internal parts of the body as design *** this way,a parametric formulation is *** related disciplines,including structure,aerodynamics,guidance,and control are *** total mass,maximum aerodynamic control effectiveness,minimum miss distance,maximum yield stress in all subsystems,controllability and gyroscopic stability constraints are some of objectives/constraints taken into *** problem is formulated in All-At-Ones Multidisciplinary Design Optimization approach structure and solved by Simulated Annealing and minimax *** optimal configurations are evaluated in various *** resulted optimal configurations have met all design objectives and constraints.

关键词： Flying projectile optimal design All-at-ones multidisciplinary optimization Structure discipline Guidance and control discipline Aerodynamic discipline

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Analyzing the Interplay of Sintering Conditions on Microstructure and Hardness in Indirect Additive Manufacturing of 17-4PH Stainless Steel

引用

Acta Metallurgica Sinica(English Letters) 2024年第9期37卷 1611-1620页

作者： Erika Lannunziata mohammad hossein Mosallanejad Manuela Galati Gabriele Piscopo Abdollah Saboori Integrated Additive Manufacturing Center Department of Management and Production EngineeringPolitecnico di TorinoCorso Duca Degli Abruzzi 2410129TurinItaly

Indirect additive manufacturing(AM)methods have recently attracted attention from researchers thanks to their great potential for cheap,straightforward,and small-scale production of metallic *** diffusion additive manufacturing(ADAM),a variant of indirect AM methods,is a layer-wise indirect AM process recently developed based on fused deposition modeling and metal injection ***,there is still limited knowledge of the process conditions and material properties fabricated through this process,where sintering plays a crucial role in the final consolidation of ***,this research,for the first time,systematically investigates the impact of various sintering conditions on the shrinkage,relative density,microstructure,and hardness of the 17-4PH ADAM *** this reason,as-washed samples were sintered under different time-temperature *** sample density was evaluated using Archimedes,computed tomography,and image analysis *** outcomes revealed that sintering variables significantly impacted the density of brown 17-4PH Stainless Steel *** results indicated more than 99% relative densities,higher than the value reported by Markforged Inc.(~96%).Based on parallel porosities observed in the computed tomography results,it can be suggested that by modifying the infill pattern during printing,it would be possible to increase the final relative *** microhardness of the sintered samples in this study was higher than that of the standard sample provided by Markforged *** at 1330℃ for 4 h increased the density of the printed sample without compromising its mechanical *** to X-ray diffraction analysis,the standard sample provided by Markforged ***“1330℃—4 h”one had similar stable phases,although copper-rich intermetallics were more abundant in the microstructure of reference *** study is expected to facilitate the adoption of indirect metal AM methods by different sector

关键词： Indirect additive manufacturing Atomic diffusion additive manufacturing 17-4PH stainless steel Computed tomography Sintering

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Assessment of electrostatic discharge sensitivity of nitrogen-rich heterocyclic energetic compounds and their salts as high energy-density dangerous compounds: A study of structural variables

引用

DEFENCE TECHNOLOGY 2024年第9期39卷 15-22页

作者： Keshavarz, mohammad hossein Bani, Sedigheh Heydari Bakhtiari, Reza hosseini, Seyyed Hesamodin Malek Ashtar Univ Technol Fac Appl Sci Esfahan 177415875 Iran

Nitrogen-rich heterocyclic energetic compounds (NRHECs) and their salts have witnessed widespread synthesis in recent years. The substantial energy-density content within these compounds can lead to potentially dangerous explosive reactions when subjected to external stimuli such as electrical discharge. Therefore, developing a reliable model for predicting their electrostatic discharge sensitivity (ESD) becomes imperative. This study proposes a novel and straightforward model based on the presence of specific groups (-NH2 or -NH-, -N = N+ -O(- )and -NNO2, -ONO2 or -NO2) under certain conditions to assess the ESD of NRHECs and their salts, employing interpretable structural parameters. Utilizing a comprehensive dataset comprising 54 ESD measurements of NRHECs and their salts, divided into 49/5 training/test sets, the model achieves promising results. The Root Mean Square Error (RMSE), Mean Absolute Error (MAE), and Maximum Error for the training set are reported as 0.16 J, 0.12 J, and 0.5 J, respectively. Notably, the ratios RMSE(training)/RMSE(test), MAE(training)/MAE(test), and Max Error(training)/Max Error(test) are all greater than 1.0, indicating the robust predictive capabilities of the model. The presented model demonstrates its efficacy in providing a reliable assessment of ESD for the targeted NRHECs and their salts, without the need for intricate computer codes or expert involvement. (c) 2024 China Ordnance Society. Publishing services by Elsevier B.V. on behalf of KeAi Communications Co. Ltd. This is an open access article under the CC BY-NC-ND license (http://***/ licenses/by-nc-nd/4.0/).

关键词： Electrostatic discharge sensitivity Heterocyclic energetic compounds containing azole compound Interpretable structural parameter Safety ELECTRIC SPARK SENSITIVITY THERMAL-DECOMPOSITION IMPACT SENSITIVITY NITRAMINES PERFORMANCE EXPLOSIVES PREDICTION

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

A handy review of carpal tunnel syndrome:From anatomy to diagnosis and treatment

引用

World Journal of Radiology 2014年第6期6卷 284-300页

作者： mohammad Ghasemi-rad Emad Nosair Andrea Vegh Afshin mohammadi Adam Akkad Emal Lesha mohammad hossein mohammadi Doaa Sayed Ali Davarian Tooraj Maleki-Miyoab Anwarul Hasan Center for Biomedical Engineering Department of Medicine Brigham and Women’s Hospital Harvard Medical School Cam-bridge MA 02139 United States Harvard-MIT Division of Health Sciences and Technology Massachusetts Institute of Technology Cambridge MA 02139 United States Anatomical Sciences Basic Medical Sciences DepartmentCollege of MedicineSharjah UniversitySharjah27272The United Arab Emirates Department of Materials Science and Engineer-ing University of Toronto Toronto Ontario M5S1A4 Canada Department of Radiology Imam Khomainee Hospital Urmia University of Medical Sciences Urmia *** Iran College of Science and Mathematics University of Massachusetts Boston Boston MA 02138 United States Department of Chemical En-gineering Sharif University of Technology Tehran *** Iran Department of Clinical Dentistry College of Den-tistry Ajman University of Science and Technology Ajman 2441 The United Arab Emirates Department of Biochemistry and Molecular Bio-physics Washington University School of Medicine St. Louis MO 63110 United States Biomedical Engineering and Department of Mechanical Engineering American University of Beirut Beirut 1107 2020 Lebanon

Carpal tunnel syndrome(CTS) is the most commonly diagnosed disabling condition of the upper extremities. It is the most commonly known and prevalent type of peripheral entrapment neuropathy that accounts for about 90% of all entrapment neuropathies. This review aims to provide an outline of CTS by considering anat-omy, pathophysiology, clinical manifestation, diagnostic modalities and management of this common condition, with an emphasis on the diagnostic imaging evaluation.

关键词： Carpal tunnel syndrome Anatomy Ultra-sonography Magnetic resonance imaging Computed tomography Ultrasonography Diagnosis Nerve con-duction study Treatment

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Improvement of Surface Mechanical and Tribological Characteristics of L-PBF Processed Commercially Pure Titanium through Ultrasonic Impact Treatment

引用

Acta Metallurgica Sinica(English Letters) 2024年第6期37卷 1034-1046页

作者： Iman Ansarian Reza Taghiabadi Saeid Amini mohammad hossein Mosallanejad Luca Iuliano Abdollah Saboori Department of Materials Science and Metallurgy Imam Khomeini International University(IKIU)QazvinIran Department of Mechanical Engineering University of KashanKashanIran Integrated Additive Manufacturing Center Department of Management and Production EngineeringPolitecnico di TorinoCorso Duca Degli Abruzzi 2410129TurinItaly

Multi-pass ultrasonic impact treatment(UIT)was applied to modify the microstructure and improve the mechanical and tribological characteristics at the near-surface region of commercially pure Ti(CP-Ti)specimens produced by the laser powder bed fusion(L-PBF)*** considerably refined the L-PBF process-related acicular martensites(α′-M)and produced a well-homogenized and dense surface microstructure,where the porosity content of 1-,3-,and 5-pass UITed samples was reduced by 43,60,and 67%,*** UITed samples showed an enhancement in their near-surface mechanical properties up to a depth of about 300μ*** nanoindentation results for the 3-pass UITed sample revealed an increase of about 53,45,and 220%in its nanohardness,H/E_(r),and H_(3)/E_(r)^(2)indices,*** stylus profilometry results showed that performing the UIT removed the L-PBF-related features/defects and offered a smooth *** roughness average(R_(a))and the skewness(R_(sk))of the 3-pass UITed sample were found to be lower than those of the L-PBFed sample by 95 and 223%,*** the UIT also enhanced the material ratio,where the maximum load-bearing capacity(~100%)in as-L-PBFed(as-built)and 3-pass UITed samples was obtained at 60-and 10-µm depths,*** tribological investigations showed that applying the UIT resulted in a significant reduction of wear rate and average coefficient of friction(COF)of *** instance,under the normal pressures of 0.05 and 0.2 MPa,the wear rate and COF of the 3-pass UITed sample were lower than those of the L-PBFed sample by 65 and 58%,and 20 and 17%,respectively.

关键词： Laser powder bed fusion Ultrasonic impact treatment Commercially pure Ti(CP-Ti) Surface mechanical properties Tribological properties

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Er_(2)TiO_(5)@Ag nanocomposites:Enhanced photocatalysis and bacteria inactivation,and cytotoxicity

引用

Journal of Rare Earths 2024年第5期42卷 851-858,I0002页

作者： Mehdi Nazeri hossein Sedaghat Reza Rafiei mohammad Amin Farzin Seyed Mostafa hosseinpour Mashkani Department of Parasitology and Mycology Kashan University of Medical SciencesKashanIran Department of Microbiology Kashan University of Medical SciencesKashanIran General Medicine Student School of MedicineKashan University of Medical SciencesKashanIran Student Research Committee Kashan University of Medical SciencesKashanIran Institute for Biomedical Materials and Devices School of Mathematical and Physical SciencesFaculty of ScienceUniversity of Technology SydneyNSW2007Australia

In this study,we successfully synthesized Er_(2)TiO_(5)@Ag nanocomposites(NCPs) using the ultrasonicmediated sol-gel technique to create a multifunctional material with enhanced photocatalytic and antibacterial *** visible light photocatalytic activities of Er_(2)TiO_(5) nanoparticles(NPs) and Er_(2)TiO_(5)@Ag NCPs were systematically evaluated under various conditions,including different concentrations of Basic Blue 41(BB 41) dye and *** results reveal a remarkable improvement in the photocatalytic degradation efficiency of Er_(2)TiO_(5)@Ag NCPs(95%) compared to Er_(2)TiO_(5) NPs(80%).Furthermore,the antibacterial efficacy of Er_(2)TiO_(5) NPs and Er2TiO_5@Ag NCPs were extensively examined against Gram-positive and Gram-negative ***,Er_(2)TiO_(5)@Ag NCPs exhibit significantly higher minimum bactericidal concentration(MBC) values compared to Er_(2)TiO_(5) *** antibacterial effect of Er_(2)TiO_(5)@Ag NCPs is particularly pronounced against *** and Pseudomonas aeruginosa,while demonstrating moderate effects on Escherichia coli and Enterococcus *** assess the biocompatibility of the synthesized materials,we investigated their internalization by MCF-7 ***,both Er_(2)TiO_(5) NPs and Er_(2)TiO_(5)@Ag NCPs are found to be effectively internalized by the cells,suggesting their potential application in biomedical ***,our study unveils the exceptional potential of Er_(2)TiO_(5)@Ag NCPs as a dual-action solution,simultaneously possessing enhanced photocatalytic efficiency and potent antibacterial *** multifunctional nanocomposite not only outperforms Er_(2)TiO_(5) and Ag but also paves the way for innovative applications in sustainable environmental remediation and advanced biomedical technologies,promising a brighter and cleaner future.

关键词： Rare earth catalysis Nanocomposite Er_(2)TiO_(5)@Ag Antibacterial activity Photocatalysis Cytotoxicity

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A Review of Image Steganography Based on Multiple Hashing Algorithm

引用

Computers, Materials & Continua 2024年第8期80卷 2463-2494页

作者： Abdullah Alenizi mohammad Sajid mohammadi Ahmad A.Al-Hajji Arshiya Sajid Ansari Department of Information Technology College of Computer and Information SciencesMajmaah UniversityAl-Majmaah11952Saudi Arabia Department of Computer Science College of Engineering and Information TechnologyOnaizah CollegesQassim56312Saudi Arabia

Steganography is a technique for hiding secret messages while sending and receiving communications through a cover *** ancient times to the present,the security of secret or vital information has always been a significant *** development of secure communication methods that keep recipient-only data transmissions secret has always been an area of ***,several approaches,including steganography,have been developed by researchers over time to enable safe data *** this review,we have discussed image steganography based on Discrete Cosine Transform(DCT)algorithm,*** have also discussed image steganography based on multiple hashing algorithms like the Rivest–Shamir–Adleman(RSA)method,the Blowfish technique,and the hash-least significant bit(LSB)*** this review,a novel method of hiding information in images has been developed with minimal variance in image bits,making our method secure and effective.A cryptography mechanism was also used in this *** encoding the data and embedding it into a carry image,this review verifies that it has been ***,embedded text in photos conveys crucial signals about the *** review employs hash table encryption on the message before hiding it within the picture to provide a more secure method of data *** the message is ever intercepted by a third party,there are several ways to stop this operation.A second level of security process implementation involves encrypting and decrypting steganography images using different hashing algorithms.

关键词： Image steganography multiple hashing algorithms Hash-LSB approach RSA algorithm discrete cosine transform(DCT)algorithm blowfish algorithm

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：