检索结果-南通市图书馆

Effect of Zirconium Oxide Nano-Fillers Addition on the Flexural Strength, Fracture Toughness, and Hardness of Heat-Polymerized Acrylic Resin

引用

World Journal of Nano Science and Engineering 2014年第2期4卷 50-57页

作者： mohamed ashour ahmed mohamed I. Ebrahim Department of Prosthodontics Faculty of Dental Medicine Taif University Taif KSA Department of Restorative Dentistry Taif University Taif KSA Department of Dental Biomaterial Al-Azhar University Cairo Egypt

Purpose: The mechanical strength of polymethyl methacrylate (PMMA) remains far from ideal for maintaining the longevity of denture. The purpose of this study was to evaluate the effect of Zirconium oxide (ZrO2) nanofillers powder with different concentration (1.5%, 3%, 5% and 7%) on the flexural strength, fracture toughness, and hardness of heat-polymerized acrylic resin. Materials and methods: Zirconium oxide powders with different concentrations (1.5%, 3%, 5% and 7%) were incorporated into heat-cure acrylic resin (PMMA) and processed with optimal condition (2.5:1 Powder/monomer ratio, conventional packing method and water bath curing for 2 hours at 95。C) to fabricate test specimens of PMMA of dimensions (50 × 30 × 30 mm) for the flexural strength, fracture toughness, and (50 × 30 × 30 mm) were fabricated for measuring hardness. PMMA without additives was prepared as a test control. Three types of mechanical tests;flexural strength, fracture toughness and hardness were carried out on the samples. The recorded values of flexural strength in (MPa), fracture toughness in (MPa.m1/2), and hardness (VHN) were collected, tabulated and statistically analyzed. One way analysis of variance (ANOVA) and Tukey’s tests were used for testing the significance between the means of tested groups which are statistically significant when the P value ≤ 0.05. Results: Addition of Zirconium oxide nanofillers to PMMA significantly increased the flexural strength, fracture toughness and hardness. Conclusion: These results indicate that Zirconium oxide nanofillers added to PMMA has a potential as a reliable denture base material with increased flexural strength, fracture toughness, and hardness. According to the results of the present study, the best mechanical properties were achieved by adding 7%wt ZrO2 concentration.

关键词： Zirconium Oxide Nano-Fillers Flexural Strength Fracture Toughness Hardness Heat-Polymerized Acrylic Resin

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Effect of Nanoparticles Reinforced Adhesive Layers on Microleakage of Tooth Restorations

引用

World Journal of Nano Science and Engineering 2016年第2期6卷 64-69页

作者： mohamed I. Ebrahim mohamed ashour ahmed Nayef H. Felemban Department of Restorative Dentistry Faculty of Dentistry Taif University Taif Saudi Arabia Department of Prosthodontics Faculty of Dentistry Taif University Taif Saudi Arabia Department of Orthodontics Faculty of Dentistry Taif University Taif Saudi Arabia

Adhesive layer is an essential part of tooth colored restorations which play an important role in decreasing the microleakage between the tooth and restoration material after polymerization shrinkage. The purpose of this study was to evaluate the effect of deferent adhesive system of bonding agent on microleakage of nanocomposite resin in class II cavities. Two different types of adhesive systems: universal adhesive (ExciTE) and a newly developed adhesive (Nano-Bond) and one type of light-cured resin restorative material (nanocomposite resin) were used in this study. These adhesives were applied to prepared tooth cavities by either manufactures’ instructions or by an experimental method (single or double application). Nanocomposite resin was then placed and light-cured for 40 seconds. Teeth were subjected to 500 thermal cycles between 5°C and 55°C and were immersed in 3% methylene blue solution for 24 hours;microleakage was observed microscopically. The data were analyzed by a two-way ANOVA. For comparison between groups, Tukey’s post-hoc test was used. Nanoparticles reinforced adhesive system shows low microleakage in compare with universal adhesive system, and application of two adhesive layers also can decrease the microleakage. The ability of stress absorption by adhesive layer after polymerization shrinkage of restoration material will reduce the microleakage.

关键词： Adhesive Layer Tooth Colored Restorations Nanoparticles Microleakage

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Effect of Titanium Dioxide Nano Particles Incorporation on Mechanical and Physical Properties on Two Different Types of Acrylic Resin Denture Base

引用

World Journal of Nano Science and Engineering 2016年第3期6卷 111-119页

作者： mohamed ashour ahmed M. El-Shennawy Yousef M. Althomali Adel A. Omar Prosthodontics Department Faculty of Dentistry Taif University Taif Saudi Arabia Mechanical Engineering Department Engineering College Taif University Taif Saudi Arabia Preventive Department Faculty of Dentistry Taif University Taif Saudi Arabia

The aim of this study is to clarify the effect of different concentrations of titanium dioxide nanoparticles (Nps) on the properties of two types of heat polymerized acrylic resin. The tested parameters were flexural strength, impact strength, and microhardness. The two types of acrylic resin used in this study were conventional unmodified (Implacryl, Vertex) and high impact heat polymerized acrylic resin (Vertex-Dental, Netherlands). Both types of acrylic resin were modified by using 1% and 5% TiO2 Nps powder. Specimen’s dimensions were prepared according to the American Dental Association Specification No. 12. Three types of specimens were prepared: 1) flexural strength specimens 50 mm × 10 (±0.2) mm × 3 (±0.2) mm, 2) impact strength test specimens 60 mm × 6.0 mm × 4.0 mm, 3) microhardnesss specimens 25 mm × 10 mm × 3 (±0.2) mm. For each test 6 groups were prepared (each group containing 5 samples). Thirty specimens were prepared in each of the three tests, amounting to a total number of 90 specimens. Mechanical properties such as flexural strength (FS), impact strength and microhardness of the above mentioned specimens were determined using universal testing machine, Izod pendulum impact testing machine and Vickers microhardness tester, respectively. ISO Specification No. 1567 was followed in microhardness test. The data was collected and statistically analyzed. Flexural strength considerably decreased by increasing TiO2 concentration in both types of acrylic resin. Impact strength of the conventional acrylic resin modified by 1% of additives significantly increased. The microhardness is significantly increased by addition of 5% of TiO2 Nps. The Incorporation of TiO2 nanoparticles into acrylic resins can adversely affect its flexural strength. Meanwhile, the impact strength can be modified by small percentage of additives (abt. 1%). This effect is directly correlated with the concentration of nanoparticles. On the other

关键词： Titanium Dioxide High Impact Acrylic Resin Conventional Unmodified Acrylic Resin Impact Strength Flexural Strength Microhardness Water Sorption

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Dynamic Interaction Analysis of Coupled Axial-Torsional-Lateral Mechanical Vibrations in Rotary Drilling Systems

引用

Structural Durability & Health Monitoring 2025年第1期19卷 77-103页

作者： Sabrina Meddah Sid ahmed Tadjer Abdelhakim Idir Kong Fah Tee mohamed Zinelabidine Doghmane Madjid Kidouche Applied Automation Laboratory Faculty of Hydrocarbons and ChemistryUniversity of BoumerdesBoumerdes35000Algeria Institute of Electrical and Electronic Engineering(IGEE) University of BoumerdesBoumerdes35000Algeria Laboratory of the Electrification of Industrial Enterprises University of BoumerdesBoumerdes35000Algeria Electrical Engineering Department Mohamed Boudiaf University of M’silaM’sila28000Algeria Department of Civil and Environmental Engineering King Fahd University of Petroleum&MineralsDhahran31261Saudi Arabia Interdisciplinary Research Center for Construction and Building Materials King Fahd University of Petroleum&Minerals(KFUPM)Dhahran31261Saudi Arabia

Maintaining the integrity and longevity of structures is essential in many industries,such as aerospace,nuclear,and *** achieve the cost-effectiveness of large-scale systems in petroleum drilling,a strong emphasis on structural durability and monitoring is *** study focuses on the mechanical vibrations that occur in rotary drilling systems,which have a substantial impact on the structural integrity of drilling *** study speciﬁcally investigates axial,torsional,and lateral vibrations,which might lead to negative consequences such as bit-bounce,chaotic whirling,and high-frequency *** events not only hinder the efﬁciency of drilling but also lead to exhaustion and harm to the system’s components since they are difﬁcult to be detected and controlled in real *** study investigates the dynamic interactions of these vibrations,speciﬁcally in their high-frequency modes,usingﬁeld data obtained from measurement while ***ﬁndings have demonstrated the effect of strong coupling between the high-frequency modes of these vibrations on drilling sys-tem *** obtained results highlight the importance of considering the interconnected impacts of these vibrations when designing and implementing robust control ***,integrating these compo-nents can increase the durability of drill bits and drill strings,as well as improve the ability to monitor and detect ***,by exploiting theseﬁndings,the assessment of structural resilience in rotary drilling systems can be ***,the study demonstrates the capacity of structural health monitoring to improve the quality,dependability,and efﬁciency of rotary drilling systems in the petroleum industry.

关键词： Rotary drilling systems mechanical vibrations structural durability dynamic interaction analysis ﬁeld data analysis

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Ecological risk assessment of surficial sediment by heavy metals from a submerged archaeology harbor,South Mediterranean Sea,Egypt

引用

Acta Geochimica 2020年第2期39卷 226-235页

作者： Maha ahmed mohamed Abdallah ahmed mohamed Badr-ElDin Marine Pollution Lab National Institute of Oceanography and FisheriesAlexandriaEgypt Oceanography Department Faculty of ScienceAlexandria UniversityAlexandriaEgypt

A protected semi-enclosed embayment,the Eastern Harbor(EH),is situated in the central sector of the Mediterranean coast of Alexandria,*** is a famous fishing dock and water-sport center and its importance arose after the discovery of the Ptolemaic royal quarter of ancient *** protect this national treasure and improve its environmental health,the untreated anthropogenic effluents,which continued for decades into the EH since 1992,must be totally ***,it is an important issue to continually monitor and asses the environmental status of the *** sediment texture,total organic carbon,and the accumulation,distribution,and ecological risks of Cd,Cr,Pb,As,Hg and A1 were determined with a total of 14 surficial sediments samples collected in the EH during *** contents were compared to the literature data to assess the pollution status of *** factors,Degree of contamination(mCd)and potential ecological risk were calculated as a criterion of possible *** mCd calculation produces an overall average value for a range of pollutants,in the present study the contamination factor that provides a measure of the degree of overall contamination in the surface layers in a particular sampling site may provide a better indication of the state of pollution in the EH sediments than other indicators.

关键词： Heavy metals Eastern harbor Enrichment factors Degree of contamination Potential ecological risk

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Static and dynamic stability responses of multilayer functionally graded carbon nanotubes reinforced composite nanoplates via quasi 3D nonlocal strain gradient theory

引用

Defence Technology（防务技术） 2022年第10期18卷 1778-1809页

作者： ahmed Amine Daikh mohamed Sid ahmed Houari mohamed Ouejdi Belarbi Salwa A.mohamed mohamed A.Eltaher Laboratoire D'Etude des Structures et de Mecanique des Materiaux Departement de Genie CivilFacultedes Sciences et de La TechnologieUniversite Mustapha Stambouli B.P.305R.P.29000MascaraAlgeria Laboratoire de Genie Energetique et Materiaux LGEMUniversite de BiskraB.P.145R.P07000BiskraAlgeria Department of Engineering Mathematics Zagazig UniversityP.O.Box 44519ZagazigEgypt Faculty of Engineering Mechanical Engineering DepartmentKing Abdulaziz UniversityP.O.Box 80204JeddahSaudi Arabia Faculty of Engineering Mechanical Design and Production DepartmentZagazig UniversityP.O.Box 44519ZagazigEgypt

This manuscript presents the comprehensive study of thickness stretching effects on the free vibration,static stability and bending of multilayer functionally graded(FG)carbon nanotubes reinforced composite(CNTRC)*** nanoscale and microstructure influences are considered through a modified nonlocal strain gradient continuum *** on power-law functions,four different patterns of CNTs distribution are considered in this analysis,a uniform distribution UD,FG-V CNTRC,FG-X CNTRC,and FG-O CNTRC.A 3D kinematic shear deformation theory is proposed to include the stretching influence,which is neglected in classical ***'s principle is applied to derive the governing equations of motion and associated boundary *** solutions are developed based on Galerkin method to solve the governing equilibrium equations based on the generalized higher-order shear deformation theory and the nonlocal strain gradient theory and get the static bending,buckling loads,and natural frequencies of *** with previous works is presented.A detailed parametric analysis is carried out to highlight the impact of thickness stretching,length scale parameter(nonlocal),material scale parameter(gradient),CNTs distribution pattern,geometry of the plate,various boundary conditions and the total number of layers on the stresses,deformation,critical buckling loads and vibration *** new results are also reported in the current study,which will serve as a benchmark for future research.

关键词： 3D shear deformation theory Free vibration Buckling Bending Galerkin method Functionally graded nanotube Nonlocal strain gradient theory

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Friction and wear of sand-contaminated lubricated sliding

引用

Friction 2018年第4期6卷 457-463页

作者： mohamed ahmed RAMADAN Faculty of Engineering at Helwan Helwan University

This paper reports a test investigation of friction and wear responses from sand contaminated lubricated sliding. The influence of sand contaminants on wear and friction is characterized. Analyses are completed utilizing segments of piston ring sliding against the cylinder liner. Paraffin oil, with and without sand contaminants, is utilized. The effects of the concentration and particle size of sand are examined. Based on the observations in the present work, we found that friction and wear increase with sand concentration in the lube. Solid proposals ought to be considered, in order to enlighten the general population on the importance of changing a car engine's oil filter regularly.

关键词： sand contamination lubrication oil abrasive wear lubricated sliding

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Magnetoresistive properties of Ni-doped La_(0.7)Sr_(0.3)MnO_3 manganites

引用

Rare Metals 2016年第7期35卷 551-558页

作者： ahmed mohamed ahmed Abd El-Moez ahmed mohamed Medhat Abdelrady Abdellateef Hassan ahmed Abd El-Ghanny Physics Department Faculty of ScienceSohag University

Lao.7Sr0.3Mnl_xNixO3 （x = 0, 0.025, 0.050 and 0.075） ceramics were prepared by the conventional solid-state reaction method. The partial substitution of Mn by Ni2＋ leads to a decrease in cell volume as well as a structural transition from the rhombohedral to the orthorhombic structure. Ni2＋ doping increases the electrical resistivity, decreases the semiconductor-metal transition temperature （Tms） and relatively enhances the room temperature magnetoresistance （MR）, especially in x = 0.025 and around Tins. With respect to conduction mechanism, the small polaron hopping （SPH） and the variable range hopping （VRH） models were used to ex- amine conduction in the semiconducting region.

关键词： Manganites X-ray diffraction Structure Electrical resistivity Magnetoresistance

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Developing Check-Point Mechanism to Protect Mobile Agent Free-Roaming Against Untrusted Hosts

引用

Computers, Materials & Continua 2022年第8期72卷 3849-3862页

作者： Tarig mohamed ahmed Department of Information Technology FCITKing Abdulaziz UniversityJeddahSaudi Arabia

Mobile Agent has many benefits over traditional distributed systems such as reducing latency,bandwidth,and *** Agent Systems are not fully utilized due to security *** paper focuses on mobile agent protection against malicious hosts.A new security mechanism called Checkpoints has been *** Mechanism(CPM)aims to protect Mobile Agent against malicious hosts in case of Capturing and Integrity *** assumes using a free-roaming mobility mechanism by Mobile agent *** main idea behind CPM is to generate multiple versions of Mobile *** multiple version is used to recover Mobile Agent from Capturing and Integrity attacks by untrusted *** versions are kept in Recovery Host(RH).RH plays a key role in CPM by controlling and monitoring MAs’recovery processes.A prototype method has been used to prove the feasibility of *** p https://***/Default-305-ARrototype was implemented by using *** framework and C#.full discussion for several scenarios has been done to analyze the feasibility and performance for *** found from this research,CPM has a strong ability to protect Mobile Agents from Capturing and Integrity attacks *** addition,there is no negative impact on the overall performance of the mobile agent system.

关键词： Mobile agent security capturing integrity attacks

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Techniques for colorectal anastomosis

引用

World Journal of Gastroenterology 2010年第13期16卷 1610-1621页

作者： Yik-Hong Ho mohamed ahmed Tawfi k ashour Discipline of Surgery School of Medicine James Cook University

Colorectal anastomotic leak remains one of the most feared post-operative complications, particularly after anterior resection of the rectum with, the shift from abdomino-peritoneal resections to total mesorectal excision and primary anastomosis. The literature fails to demonstrate superiority of stapled over hand-sewn techniques in colorectal anastomosis, regardless of the level of anastomosis, although a high stricture rate was noted in the former technique. Thus, improvements in safety aspects of anastomosis and alternatives to handsewn and stapled techniques are being sought. Here, we review alternative anastomotic techniques used to fashion bowel anastomosis. Compression anastomosis using compression anastomotic clips, endoluminal compression anastomotic rings, AKA-2, biofragmental anastomotic rings, or Magnamosis all involve the concept of creating a sutureless end-to-end anastomosis by compressing two bowel ends together, leading to a simultaneous necrosis and healing process that joins the two lumens. Staple line reinforcement is a new approach that reduce the drawbacks of staplers used in colorectal practice, i.e. leakage, bleeding, misfi ring, and inadequate tissue approximation. Various nonabsorbable, semi or fully absorbable materials are now available. Two other techniques can provide alternative anastomotic support to the suture line: a colorectal drain and a polyester stent, which can be utilized in ultra-low rectal excision and can negate the formation of a defunctioning stoma. Doxycycline coated sutures have been used to overcome the post-operative weakness in anastomosis secondary to rapid matrix degradation mediated by matrix metalloproteinase. Another novel technique, the electric welding system, showed promising results in construction of a safe, neat, smooth sutureless bowel anastomosis. Various anastomotic techniques have been shown to be comparable to the standard techniques of suturing and stapling. However, most of these alternatives need t

关键词： Alternative anastomosis Compression anastomotic clip Compression anastomotic ring Biofragmental anastomotic ring AKA-2 Magnamosis (magnetic anastomosis) Matrix metallo-proteinase Sutureless

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：