检索结果-南通市图书馆

Agricultural Sciences 2015年第1期6卷 175-185页

作者： Hattem M. el-Shabrawi Bakry Ahmed Bakry mohamed A. Ahmed mohamed abou-el-lail Field Crops Research Department National Research Centre Cairo Egypt Plant Biotechnology Department National Research Centre Cairo Egypt Genetics Department Faculty of Agriculture and Natural Resources Aswan University Aswan Egypt

Humic and oxalic acids have the effects of promoting plant growth. We test whether they are able to positively impact wheat yield under newly reclaimed sandy soil, where water deficiency negatively influences yield. Foliar application of humic acid and oxalic acid on two wheat cultivars, Gemiza-9 and Sakha-93, leads to overall better performance of the plants and increases the yield significantly, irrespective of the cultivar genetic background. However, Gemiza-9 surpassed Sak- ha-93 in grain yield parameters. The highest values of grain and protein yields/ha were obtained in both cultivars, when the plants were sprayed with a combination of 17 mg/L humic acid and (300 mg/L) oxalic acid. Humic and oxalic acid showed accumulative yield-promoting effect. To understand the mechanism by which humic and oxalic acids promoted grain yield, we performed SDS-PAGE followed by MS-MS-LC analyses. We identified a unique humic acid-induced 52 KDa band in Gemiza-9. The band contained three major proteins, Ribulose bisphosphate carboxylase large chain, ADP-glucose synthase and NADP-dependent glyceraldehyde-3-phosphate dehydrogenase (GAPN). Thus humic acid increased the activity of plastid enzymes involved in photosynthesis, sucrose biosynthesis and starched accumulation to improve the overall performance of the plant.

关键词： Wheat Humic and Oxalic Acids Carbohydrate Metabolism Calvin Cycle SDS-PAGE Mass Spectrum Analysis

Comparison between seismic analysis of twisting and regular 52-story towers considering soil-structure interaction

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Earthquake Engineering and Engineering Vibration 2024年第3期23卷 663-675页

作者： mohamed Naguib abouelsaad Mohammed Shaaban Salah el Bagalaty mohamed E.el Madawy Structural Engineering Department Faculty of EngineeringMansura UniversityMansoura 35511Egypt Faculty of Engineering Delta University for Science and TechnologyGamasa 35712Egypt

A dynamic analysis of both twisting and regular towers is carried out to determine the results of considering soil-structure interaction(SSI)on high-rise *** addition,the difference between the seismic performance of using twisting towers over regular ones is *** twisting tower is a simulation of the Evolution Tower(Moscow).The towers’skeletons consist of RC elements and rest on a reinforced concrete piled-raft *** soil model is considered as multi-layered with the same soil properties as the zone chosen for the analysis(New Mansoura City,Egypt).The only difference between both towers is their shape in *** whole system is modelled and analyzed in a single step as one full 3D model,which is known as the direct approach in *** analyses are carried out using finite-element software(Midas GTS NX).Dynamic output responses due to three records of seismic loads are proposed and presented in some *** on the results,it is concluded that SSI has a considerable effect on the dynamic response of tall buildings mainly because of the foundation flexibility,as it leads to lengthening the vibration period,increasing the story drift and the base shear for both cases.

关键词： soil-structure interaction seismic analysis twisting towers base shear story drift finite element method Midas GTS NX

Optimized system for combined production of electricity/green hydrogen for multiple energy pathways:a case study of Egypt

在线全文

学校读者我要写书评

暂无评论

Clean Energy 2024年第4期8卷 219-236页

作者： Reda Ragab mohamed HamdiHafez A.el Salmawy mohamed A.Ismail Mechanical Power Engineering Department Zagazig UniversityZagazig 44519Egypt Mechanical Engineering Department College of EngineeringKing Faisal UniversityAl-Ahsa 31982Saudi Arabia

By optimal sizing of a wind/photovoltaic hybrid renewable-energy(RE)system,trimming the surplus capacity to reduce the fluctuations in the electricity supplied to the grid,and using it to produce green hydrogen through electrolysis,a stable output with maximum possible capacity factor(CF)is generated to maintain the electricity grid ***,the trimmed energy is used in a secondary conversion path that minimizes the weighted average cost of the energy generated from the entire *** surplus power-to-gas conversion allows the use of green hydrogen to produce electricity,methanol,or ammonia subject to the resource availability,site characteristics,and financial *** on robust site selection criteria,the best performance is obtained at two sites:Ras Ghareb and Minya,achieving the lowest energy cost with some variance in their *** the Ras Ghareb site,the optimally sized RE plant provided the grid with a quasi-steady capacity of 423 MW with a CF of 80.04%and was capable of injecting 2965.8648 GWh throughout the year with the lowest cost of 2.4355¢/kWh.A surplus of 3.9%of the total energy produced from the plant was directed to produce 1922-ton H_(2)/year,achieving the lowest cost of hydrogen production of$1.9745/kg H_(2).For the other selected site,Minya,the clipped energy is used to produce 3330.47-ton H_(2)/year with an optimized lowest cost of$3.5268/kg H_(2).The difference in hydrogen costs was attributed to the number of full operating hours of the electrolyser in both *** cost is mainly affected by the electricity price and the electrolyser *** both tending to decrease,future forecasts show hydrogen cost reductions.

关键词： hybrid renewable-energy system(HRES) green hydrogen electrolysis power-to-gas methanol ammonia

A review on the multi-scaled structures and mechanical/thermal properties of tool steels fabricated by laser powder bed fusion additive manufacturing

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第5期31卷 1048-1071页

作者： Huajing Zong Nan Kang Zehao Qin mohamed el Mansori Arts et Metiers Institute of Technology MSMPHESAM UniversitéChâlons-en-Champagne F-51006France Texas A&M Engineering Experiment Station Institute for Manufacturing SystemsCollege Station TX77843USA

The laser powder bed fusion(LPBF) process can integrally form geometrically complex and high-performance metallic parts that have attracted much interest,especially in the molds *** appearance of the LPBF makes it possible to design and produce complex conformal cooling channel systems in ***,LPBF-processed tool steels have attracted more and more *** complex thermal history in the LPBF process makes the microstructural characteristics and properties different from those of conventional manufactured tool *** paper provides an overview of LPBF-processed tool steels by describing the physical phenomena,the microstructural characteristics,and the mechanical/thermal properties,including tensile properties,wear resistance,and thermal *** microstructural characteristics are presented through a multiscale perspective,ranging from densification,meso-structure,microstructure,substructure in grains,to ***,a summary of tool steels and their challenges and outlooks are introduced.

关键词： additive manufacturing laser powder bed fusion tool steel multi-scaled structure mechanical properties thermal properties

Machine Learning and Data Fusion Approach for elastic Rock Properties Estimation and Fracturability Evaluation

在线全文

学校读者我要写书评

暂无评论

Energy and AI 2024年第2期16卷 1-13页

作者： Yiwen Gong Ilham el-Monier mohamed Mehana The Ohio State University SimTech LLC Los Alamos National Laboratory

Accurate rock elastic property determination is vital for effective hydraulic fracturing,particularly Young’s modulus due to its link to rock *** study integrates interdisciplinary data for better predictions of elastic modulus,combining data mining,experiments,and calibrated *** used the microstructural insights extracted from rock images for geomechanical facies ***,the petrophysical data and well logs were correlated with shear wave velocity(Vs)and Young’s *** developed a machine-learning workflow to predict Young’s modulus and assess rock fracturability,considering mineral composition,geomechanics,and *** findings indicate that artificial neural networks effectively predict Young’s modulus,while K-Means clustering and hierarchical support vector machines excel in identifying rock and geomechanical *** Microscale thin section analysis in conjunction with fracture modeling enhances our understanding of fracture geometries and facilitates fracturability ***,fracturability is controlled by specific geomechanical facies during initiation and propagation and influenced by continuity of geomechanical facies in small depth *** conclusion,this study demonstrates data mining and machine learning potential for predicting rock properties and assessing fracturability,aiding hydraulic fracturing design optimization through diverse data and advanced methods.

关键词： Young’s modulus prediction fracability evaluation landing point selection rock mechanics machine learning

Genetic Variability and Phenotypic Correlations Study among Grain Quality Traits and Mineral elements Concentrations in Colored and Non-Colored Rice (Oryza sativa L.)

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Phyton-International Journal of Experimental Botany 2024年第7期93卷 1733-1748页

作者： Adel A.Rezk mohamed M.el-Malky Heba I.mohamed Hossam S.el-Beltagi Agricultural Biotechnology Department College of Agricultural and Food ScienceKing Faisal UniversityAl-Ahsa31982Saudi Arabia Plant Pathology Research Institute Agriculture Research CenterGiza12619Egypt Rice Research and Training Center Field Crop Research InstituteAgriculture Research Center33717Egypt Biological and Geological Sciences Department Faculty of EducationAin Shams UniversityCairo11511Egypt Biochemistry Department Faculty of AgricultureCairo UniversityGiza12613Egypt

Twenty-four rice genotypes were examined to assess genetic variability,heritability,and correlations for seven-grain quality traits,eight nutritional elements,and *** revealed signiﬁcant differences for the quality traits *** every trait under study,the phenotypic coefﬁcient of variation was higher than the correspon-dence genotypic coefﬁcient of *** in a broad sense varied from 29.75%for grain length to 98.31%for the elongation *** percentage recovery had a highly signiﬁcant positive correlation with milling and head rice ***,milling percentage had a highly positive correlation with head rice *** amylose percentage,all the genotypes belonged to low amylose except the Hassawi-1 variety,which had intermediate amylose *** nutrition contents of magnesium(Mg),sodium(Na),potas-sium(K),calcium(Ca),copper(Cu),manganese(Mn),zinc(Zn),iron(Fe),or protein percentage gave different variations for 24 rice genotypes under all the nutritional *** the 24 genotypes,ten rice genotypes–HighNutrient-1,HighNutrient-2,HighNutrient-9,HighNutrient-8,HighNutrient-3,Hassawi-2,HighNutrient-7,HighNutrient-6,Hassawi-1,and HighNutrient-4–had the highest heist value for all nutritional and protein con-tents,and could be used as a donor to improving new *** was a positive and signiﬁcant correlation between magnesium Mg,K,Zn and ***,K had a positive correlation with zinc Zn,Fe,and protein *** analysis was divided into two groups:theﬁrst group included all genotypes rich in nutri-ents,while the remaining genotypes with low nutritional content were included in the second group.

关键词： Amylose cluster analysis genotypes grain quality mineral nutrition rice

Mafic and felsic magmatism in the Wadi Kalalat area, South Eastern Desert, Egypt: mineralogy, geochemistry and geodynamic evolution during the Neoproterozoic in the Nubian Shield

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Acta Geochimica 2024年第1期43卷 150-173页

作者： Adel A.Surour Ahmed A.Madani mohamed A.el-Sobky Faculty of Science Galala UniversityNew Galala CitySuez 43511Egypt Department of Geology Faculty of ScienceCairo UniversityGiza 12613Egypt Egyptian Mineral Resources Authority P.O.Box 11517AbbasiyaCairoEgypt

In the south Eastern Desert of Egypt,two contrasting types of magmatism(mafic and felsic) are recorded in the Wadi Kalalat area,and form the Gabal el Motaghiarat and Gabal Batuga intrusions,*** two intrusions post-dates ophiolitic and arc associations represented by serpentinite and metagabbro-diorite,*** mafic intrusion has a basal ultramafic member represented by fresh peridotite,which is followed upward by olivine gabbro and anorthositic or *** mafic intrusion pertains to the Alaskan-type mafic-ultramafic intrusions in the Arabian-Nubian Shield(ANS)being of tholeiitic nature and emplaced in a typical arc *** the other hand,the Gabal Batuga intrusion comprises three varieties of fresh A-type granites of high K-calc alkaline nature,which is peraluminous and garnetbearing in parts.A narrow thermal aureole in the olivine gabbro of the mafic intrusion was developed due to the intrusion of the Batuga *** results in the development of a hornfelsic melagabbro variety in which the composition changed from tholeiitic to a calc-alkaline composition due to the addition of S_(i)O_(2),Al_(2)O_(3),alkalis,lithosphile elements(LILEs) such as Rb(70 ppm) and Y(28 ppm) from the felsic *** the thermal aureole,Rb amounts 2-8 ppm and Y lies in the range elieved that the Gabal Batuga felsic intrusion started to emplace during the waning stage of an arc system,with transition from the pre-collisional(i.e.,arc setting) to post-collisional and within plate *** from which the Gabal Batuga granites were fractionated is high-K calc-alkaline giving rise to a typical post-collisional A-type granite(A_(2)-subtype) indicating an origin from an underplating crustal ***,it is stressed here that the younger granites in the ANS are not exclusively post-collisional and within-plate but most likely they started to develop before closure of the arc *** possible source(s) of mafic magmas

关键词： Wadi Kalalat Gabal el Motaghairat mafic intrusion Gabal Batuga felsic intrusion Arc setting Post-collision Within-plate

Evaluation of urea breath test as a diagnostic tool for Helicobacter pylori infection in adult dyspeptic patients

在线全文

学校读者我要写书评

暂无评论

World Journal of Gastroenterology 2024年第17期30卷 2302-2307页

作者： Zeinab Nabil Ahmed Said Asmaa mohamed el-Nasser Department of Medical Microbiology&Immunology Faculty of Medicine for Girls Al-Azhar UniversityNasr City 11754CairoEgypt

In this editorial,we discuss the article in the World Journal of *** article conducts a meta-analysis of the diagnostic accuracy of the urea breath test(UBT),a non-invasive method for detecting Helicobacter pylori(***)infection in *** is based on radionuclide-labeled *** methods,both invasive and non-invasive,are available for diagnosing *** infection,inclu-ding endoscopy with biopsy,serology for immunoglobulin titers,stool antigen analysis,and *** guidelines recommend UBTs as the primary choice for diagnosing *** infection and for reexamining after eradication *** is used to be the first choice non-invasive test due to their high accuracy,specificity,rapid results,and ***,its performance remains unaffected by the distribution of *** in the stomach,allowing a high flow of patients to be *** its widespread use,the performance characteristics of UBT have been inconsistently described and remain incompletely *** are two UBTs available with Food and Drug Administration approval:The 13C and 14C *** tests are affordable and can provide real-time *** may prefer the 13C test because it is non-radioactive,compared to 14C which uses a radioactive isotope,especially in young children and pregnant *** there was heterogeneity among the studies regarding the diagnostic accuracy of both UBTs,13C-UBT consistently outperforms the *** makes the 13C-UBT the preferred diagnostic ***,the provided findings of the meta-analysis emphasize the significance of precise considerations when choosing urea dosage,assessment timing,and measurement techniques for both the 13C-UBT and 14C-UBT,to enhance diagnostic precision.

关键词： Helicobacter pylori Urea breath test Diagnosis Diagnostic test accuracy Meta-analysis

Wood By-Products as UV Protection:A Consequence Review

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Renewable Materials 2024年第4期12卷 699-720页

作者： Naglaa Salem el‑Sayed mohamed Hasanin Samir Kamel Cellulose and Paper Department National Research CentreCairo12622Egypt

In recent decades,the ozone layer has suffered considerable damage,increasing the entry of ultraviolet(UV)light into the atmosphere and reaching the earth’s surface,negatively affecting ***,researchers aimed to solve this problem by synthesizing advanced UV-shielding *** the other hand,developing an easy and green strategy to prepare functional materials with outstanding properties based on naturally abundant and environmentally friendly raw materials is highly desirable for sustainable *** biomass-derived materials are sustainable and biodegradable,they present a promising substitute for petroleum-based *** three main structural constituents of the plant biomass-based materials that are naturally available are cellulose,hemicellulose,and *** review details current developments using wood-based products such as cellulose,hemicellulose,and lignin in UV-shielding *** will start with assembling the structure and chemistry of cellulose,hemicellulose,and lignin,followed by their contributions to preparing UV-shielding ***,it will briefly discuss the different processing methods for the design of UV-shielding *** wood by-products offer additional opportunities to use the whole tree harvest.

关键词： UV-shielding wood cellulose lignin hemicellulose sunlight protection

Dysprosium oxide,alumina,and graphene oxide reinforced polycaprolactone thin films:Thermal stability,morphology,and cell viability

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第7期42卷 1337-1343,I0005页

作者： mohamed Tharwat elabbasy mohamed R.Atteya Mai A.Samak Mousa Abdelrahman Tahani AlMahmoud M.A.el-Morsy A.A.Menazea M.F.H.Abd el-Kader Department of Public Health College of Public Health and Health InformaticsUniversity of Ha'ilHa'il2440Saudi Arabia Food Control Department Faculty of Veterinary MedicineZagazig UniversityZagazig44519Egypt Department of Physical Therapy College of Applied Medical SciencesUniversity of Ha'ilHa'ilSaudi Arabia Department of Histology and Cell Biology Faculty of MedicineZagazig UniversityZagazig44519Egypt College of Nursing University of Ha'ilHa'ilSaudi Arabia College of Science and Humanities in Al-Kharj Physics DepartmentPlasma Technology and Material Science UnitPrince Sattam Bin Abdulaziz UniversityAl-kharj11942Saudi Arabia Physics Department Faculty of ScienceUniversity of DamiettaNew Damietta34517Egypt Spectroscopy Department Physics Research InstituteNational Research CentreDokki12622GizaEgypt Biophysics Department Faculty of ScienceCairo UniversityGizaEgypt

Developing a biomaterial for wound healing applications is still a ***,dysprosium oxide(Dy_(2)O_(3)),aluminum oxide(Al_(2)O_(3)),and graphene oxide(GO)were embedded in cast films based on polycaprolactone(PCL)to be examined for wound dressing *** techniques were used to characterize the fabricated films including X-ray diffraction(XRD),Fourier transform infrared spectroscopy(FTIR),Raman,and scanning electron microscopy(SEM),besides their biological *** thermogravimetric analysis(TGA)exhibits high thermal stability as the scaffold weight decreases slightly to 98.6%after raising the temperature from room temperature to 280℃.The cell viability was investigated and it is shown that the viable cells grow up to approximately 93%at 75μg/***,the cell attachment shows excellent behavior as the cells attach on most of the surface of the modified PCL which shows high biocompatibility.

关键词： Wound healing Polycaprolactone Dy_(2)O_(3) Al_(2)O_(3) Biocompatible Rare earths