检索结果-南通市图书馆

AWells-Riley/based COVID-19 infectiousrisk assessment model combining both short rangeandroom scale effects

Building Simulation 2024年第1期17卷 93-111页

作者： Yinshuai feng Yifan Fan Xiaoyu Luo Jian ge College of Civil Engineering and Architecture Zhejiang UniversityHangzhouChina Center for Balance Architecture Zhejiang UniversityHangzhouChina International Research Center for Green Building and Low-Carbon City International CampusZhejiang UniversityHainingChina

There is growing evidence of the high transmission potential of COVID-19 through virus-laden *** aerosols are inhaled in various concentrations,an overall assessment of transmission risks at different indoor scales is ***,a comprehensive risk assessment method that evaluates the direct link between short-range and room-scale zones is stl *** this paper,a risk assessment model combining both short-range and room-scale effects is developed to obtain effective reproduction number in confined indoor environments,called Turbulent Jet Wells Riley(TJWR)*** with the viral load data and aerosol generation data of different human respiratory activities,the Monte Carlo simulation method is applied to calculate the quanta emission rate,which further provides the input parameters of the TJWR *** known outbreaks(Hangzhou banquet hall X,Guangzhou restaurant Y,and Hong Kong restaurant Z,China)are chosen to validate the TJWR *** show that the TJWR model is more efficient than the original Wells-Riley *** average relative error of the TJWR model ranges between 9%and 44%,while for the Wells-Riley model,it ranges between 57%and 78%.The TJWR model also proves that infection risk assessments using the well-mixed assumption can systematically underestimate the transmission risk for those close to the ***,there is a significant positive linear correlation between the total number of exposed individuals at the short-range and the effective reproduction *** newly developed TJWR model has great potential for rapid and real-time overall airborne transmission risk assessment in buildings and cities.

关键词： COVID-19 airborne transmission infection risk Wells-Riley model Monte Carlo simulation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Constructal design of a rectangular parallel phase change microchannel in a three-dimensional electronic device

引用

Science China(Technological Sciences) 2024年第5期67卷 1381-1390页

作者： ZHANG JiWen feng HuiJun CHEN Lingen ge YanLin Institute of Thermal Science and Power Engineering Wuhan Institute of TechnologyWuhan430205China College of Power Engineering Naval University of EngineeringWuhan430033China Hubei Provincial Engineering Technology Research Center of Green Chemical Equipment Wuhan430205China School of Mechanical&Electrical Engineering Wuhan Institute of TechnologyWuhan430205China

Based on constructal theory,a rectangular parallel phase change microchannel model in a three-dimensional electronic device(TDED)is established with R134a as the cooling *** on the minimization of a complex function(CF)composed of linear weighting sum of maximum temperature difference and pumping power consumption,constructal design of the TDED is conducted first;and then,maximum temperature difference and pumping power consumption are minimized by non-dominated sorting genetic algorithm-II *** results reveal that there exist an optimal mass flow rate(0.0012 kg/s)and a quadratic optimal aspect ratio(AR)(0.39)of the microchannel which lead to quadratic minimum CF(0.817).Compared with the original value,the CF after optimization is reduced by 18.34%.Reducing the inlet temperature of cooling fluid and microchannel number appropriately can help to enhance the overall performance of *** using the artificial neural network and genetic algorithms in the toolboxes of Matlab software,the optimal AR gained in the Pareto solution set is located between 0.2–*** smallest deviation index among three discussed strategies is 0.346,and the corresponding optimal AR is 0.413,which is selected as the optimal design strategy of the microchannel in the TDED under multiple *** findings in this study can serve as theoretical guides for thermal designs of electronic devices.

关键词： constructal theory parallel microchannel evaporation phase change three-dimensional electronic device multi-objective optimization artificial neural network

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Constructal design of a rectangular porous fin considering minimization of maximum temperature difference and pumping power consumption

引用

Science China(Technological Sciences) 2024年第3期67卷 919-929页

作者： LIU XiaoYe feng HuiJun CHEN Lingen ge YanLin Institute of Thermal Science and Power Engineering Wuhan Institute of TechnologyWuhan 430205China College of Power Engineering Naval University of EngineeringWuhan 430033China Hubei Provincial Engineering Technology Research Center of Green Chemical Equipment Wuhan 430205China School of Mechanical&Electrical Engineering Wuhan Institute of TechnologyWuhan 430205China

A heat dissipation model of a rectangular porous fin is established based on constructal theory. First, the constructal design of rectangular porous fin is conducted by selecting a complex function minimization, which composed of linear weighting sum of maximum temperature difference and pumping power consumption, as optimization objective. Effects of gap height, air inlet velocity, total porous fin volume and porosity on the optimal constructs are investigated, respectively. The findings show that the complex function can attain its double minimum at a value of 0.802 when the fin length and number are optimized, and the corresponding optimal fin length and number are 8.01 mm and 10, respectively. In comparison to original design, the complex function and maximum temperature difference after twice optimization are decreased by 19.80% and 66.31%, ***, the comprehensive performance of porous fin is improved by simultaneously optimizing the fin length and number. The artificial neural network is applied to predict the fin performances, which is used to conduct multi-objective optimization based on NSGA-II algorithm. Optimal structure of porous fin for multiple requirements is gained by LINMAP and TOPSIS decisionmaking strategies. The findings in this study can serve as theoretical guides for fin thermal designs of electronic devices.

关键词： constructal theory rectangular porous fin pumping power consumption maximum temperature difference complex function multi-objective optimization

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Energy and exergy analyses and optimizations for two-stage TEC driven by two-stage TEG with Thomson effect

引用

Science China(Technological Sciences) 2024年第4期67卷 1077-1093页

作者： CHEN Lingen ge YanLin feng HuiJun REN TingTing Institute of Thermal Science and Power Engineering Wuhan Institute of TechnologyWuhan 430205China Hubei Provincial Engineering Technology Research Center of Green Chemical Equipment Wuhan 430205China School of Mechanical&Electrical Engineering Wuhan Institute of TechnologyWuhan 430205China

Based on the non-equilibrium thermodynamics and energy and exergy analyses,a thermodynamic model of two-stage thermoelectric(TE)cooler(TTEC)driven by two-stage TE generator(TTEG)(TTEG-TTEC)combined TE device is established with involving Thomson effect by fitting method of variable physical parameters of TE *** total number of TE elements as constraint,influences of number distributions of TE elements on three device performance indictors,that is,cooling load,maximum COP and maximum exergetic efficiency,are *** number distributions of TE elements are optimized with three maximum performance indictors as the objectives,*** of hot-junction temperature of TTEG and coldjunction temperature of TTEC on optimization results are analyzed,and difference between optimization results corresponding to three performance indicators are *** performance intervals and optimal variable intervals are *** of Thomson effect on three general performance indicators,three optimal performance indicators and optimal variables are comparatively *** effect reduces three general performance indicators and three optimal performance indicators of *** hot-and cold-junction temperatures of TTEG and TTEC are 450,305,325 and 295 K,respectively,Thomson effect reduced maximum cooling load,maximum COP and maximum exergetic efficiency from 9.528 W,9.043×10^(-2)and2.552%to 6.651 W,6.286×10^(-2)and 1.752%,respectively.

关键词： non-equilibrium thermodynamics cooling load COP exergetic efficiency combined thermoelectric device performance optimization

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A class of natural pinus koraiensis population system with time delay and diffusion term

引用

International Journal of Biomathematics 2024年第2期17卷 233-262页

作者： Guo-feng feng Jiaqi Chen Bin ge School of Mathematical Sciences Harbin Engineering University Harbin 150001 P.R.China

In this paper,we consider the long-term sustainability of the northeast Korean *** propose a class of natural Korean pine population system with time delay and diffusion ***,by analyzing the roots distribution of the characteristic equation,we study the stability of the model system with diffusion terms and prove the occurrence of Hopf ***,we introduce lactation time delay into a population model with a diffusion term,based on stability theory of ordinary differential equation,norm form methods and center manifold theorem,the stability of bifurcating periodic solutions and the relevant formula for the direction of Hopf bifurcation are ***,some numerical simulations are given.

关键词： Pinus koraiensis populations delay diffusion term Hopf bifurcation periodic solution

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Communication Resource-Efficient Vehicle Platooning Control With Various Spacing Policies

引用

IEEE/CAA Journal of Automatica Sinica 2024年第2期11卷 362-376页

作者： Xiaohua ge Qing-Long Han Xian-ming Zhang Derui Ding IEEE School of Science Computing and Engineering TechnologiesSwinburne University of TechnologyMelbourne VIC 3122Australia

Platooning represents one of the key features that connected automated vehicles may possess as it allows multiple automated vehicles to be maneuvered cooperatively with small headways on roads. However, a critical challenge in accomplishing automated vehicle platoons is to deal with the effects of intermittent and sporadic vehicle-to-vehicle data transmissions caused by limited wireless communication resources. This paper addresses the co-design problem of dynamic event-triggered communication scheduling and cooperative adaptive cruise control for a convoy of automated vehicles with diverse spacing policies. The central aim is to achieve automated vehicle platooning under various gap references with desired platoon stability and spacing performance requirements, while simultaneously improving communication efficiency. Toward this aim, a dynamic event-triggered scheduling mechanism is developed such that the intervehicle data transmissions are scheduled dynamically and efficiently over time. Then, a tractable co-design criterion on the existence of both the admissible event-driven cooperative adaptive cruise control law and the desired scheduling mechanism is derived. Finally, comparative simulation results are presented to substantiate the effectiveness and merits of the obtained results.

关键词： Automated vehicles constant time headway spacing constant spacing cooperative adaptive cruise control event-triggered communication vehicle platooning

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Constructal design of printed circuit recuperator for S-CO_(2)cycle via multi-objective optimization algorithm

引用

Science China(Technological Sciences) 2024年第1期67卷 285-294页

作者： DAN ZhiSong feng HuiJun CHEN Lingen LIAO NaiBing ge YanLin Institute of Thermal Science and Power Engineering Wuhan Institute of TechnologyWuhan 430205China College of Power Engineering Naval University of EngineeringWuhan 430033China Hubei Provincial Engineering Technology Research Center of Green Chemical Equipment Wuhan 430205China School of Mechanical&Electrical Engineering Wuhan Institute of TechnologyWuhan 430205China AECC Hunan Aviation Powerplant Research Institute Zhuzhou 412002China

Based on a constructal theory,the structure design of a printed circuit recuperator with a semicircular heat transfer channel for supercritical CO_(2)cycle is carried ***,a complex function composed of weighted sum of the reciprocal of total heat transfer rate and total pumping power consumption is regarded as an optimization objective,and total volumes of the recuperator and heat transfer channel are regarded as *** optimal heat transfer channel radius and minimum complex function of the recuperator are *** turns out that heat transfer rate,pumping power consumption,and complex function under the optimal construct of recuperator are reduced by 15.10%,82.44%,and 32.33%,*** exists the optimal single plate channel number which results in the double minimum complex ***,for the purpose of minimizing the reciprocal of heat transfer rate and pumping power consumption,NSGA-II algorithm is used to achieve multi-objective optimization,and the minimum deviation index derived by the decision-making methods is 0.076,which can be taken as multi-objective optimal design scheme for printed circuit recuperator with semicircular heat transfer *** findings presented here can serve as theoretical recommendations for the structure design of printed circuit recuperator.

关键词： constructal theory supercritical CO_(2)cycle printed circuit heat exchanger heat transfer rate pumping power consumption multi-objective optimization

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

An improved analysis method for assessing the nuclear-heating impact on the stability of toroidal field magnets in fusion reactors

引用

Nuclear Science and Techniques 2024年第6期35卷 163-176页

作者： Yu-Dong Lu Jin-Xing Zheng Xu-feng Liu Huan Wu Jian ge Kun Xu ming Li Hai-Yang Liu Lei Zhu Fei Liu Institute of Plasma Physics Hefei Institutes of Physical ScienceChinese Academy of SciencesHefei 230031China University of Science and Technology of China Hefei 230026China

The superconducting magnet system of a fusion reactor plays a vital role in plasma confinement,a process that can be dis-rupted by various operational factors.A critical parameter for evaluating the temperature margin of superconducting magnets during normal operation is the nuclear heating caused by D-T *** study investigates the impact of nuclear heat-ing on a superconducting magnet system by employing an improved analysis method that combines neutronics and thermal *** the magnet system,toroidal field(TF)magnets are positioned closest to the plasma and bear the highest nuclear-heat load,making them prime candidates for evaluating the influence of nuclear heating on *** enhance the modeling accuracy and facilitate design modifications,a parametric TF model that incorporates heterogeneity is established to expedite the optimization design process and enhance the accuracy of the computations.A comparative analysis with a homogeneous TF model reveals that the heterogeneous model improves accuracy by over 12%.Considering factors such as heat load,magnetic-field strength,and cooling conditions,the cooling circuit facing the most severe conditions is selected to calculate the temperature of the *** selection streamlines the workload associated with thermal-hydraulic *** approach enables a more efficient and precise evaluation of the temperature margin of TF ***,it offers insights that can guide the optimization of both the structure and cooling strategy of superconducting magnet systems.

关键词： Superconducting magnet Nuclear heating Neutronics Thermal hydraulics

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Temporal and Spectral Characteristics of Persistent Emission and Special Bursts of Magnetar SGR J1935+2154 Based on Insight-HXMT

引用

Research in Astronomy and Astrophysics 2024年第6期24卷 225-233页

作者： Xue-feng Lu Li-ming Song ming-Yu ge Shuang-Nan Zhang Jin-Lu Qu Ce Cai Cong-Zhan Liu Cheng-Kui Li Yu-Cong Fu Ying-Chen Xu Key Laboratory of Particle Astrophysics Institute of High Energy PhysicsBeijing 100049China University of Chinese Academy of Sciences Chinese Academy of SciencesBeijing 100049China College of Physics and Hebei Key Laboratory of Photophysics Research and Application Hebei Normal UniversityShijiazhuang 050024China Department of Astronomy Beijing Normal UniversityBeijing 100875China

In October 2022,the magnetar SGR J1935+2154 entered the active outburst *** the episode,the InsightHXMT satellite carried out a long observation that lasted for 20 *** than 300 bursts were detected,and a certain amount of persistent radiation signals were also *** paper mainly introduces the results of persistent radiation profile folding and period search based on Insight-HXMT *** the same time,the burst phase distribution characteristics,spectral lag results of burst,the spectral characteristics of zero-lag bursts and the time-resolved spectral evolution characteristics of high-flux bursts are *** found that there is no significant delay feature during different energy bands for the bursts of SGR J1935+*** observed zero-lag burst does not have a unique *** time-resolved spectrum of the individual burst has consistent spectral types and spectral parameters at different time periods of the *** also find that the burst number phase distribution and the burst photon phase distribution have the same tendency to concentrate in specific regions of the persistent emission profile.

关键词： radiation mechanisms:general dense matter magnetic fields

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Sparse Modal Decomposition Method Addressing Underdetermined Vortex-Induced Vibration Reconstruction Problem for Marine Risers

引用

China Ocean Engineering 2024年第2期38卷 285-296页

作者： DU Zun-feng ZHU Hai-ming YU Jian-xing State Key Laboratory of Hydraulic Engineering Intelligent Construction and Operation School of Civil EngineeringTianjin UniversityTianjin 300350China

When investigating the vortex-induced vibration(VIV)of marine risers,extrapolating the dynamic response on the entire length based on limited sensor measurements is a crucial step in both laboratory experiments and fatigue monitoring of real *** problem is conventionally solved using the modal decomposition method,based on the principle that the response can be approximated by a weighted sum of limited vibration ***,the method is not valid when the problem is underdetermined,i.e.,the number of unknown mode weights is more than the number of known *** study proposed a sparse modal decomposition method based on the compressed sensing theory and the Compressive Sampling Matching Pursuit(Co Sa MP)algorithm,exploiting the sparsity of VIV in the modal *** the validation study based on high-order VIV experiment data,the proposed method successfully reconstructed the response using only seven acceleration measurements when the conventional methods failed.A primary advantage of the proposed method is that it offers a completely data-driven approach for the underdetermined VIV reconstruction problem,which is more favorable than existing model-dependent solutions for many practical applications such as riser structural health monitoring.

关键词： motion reconstruction vortex-induced vibration(VIV) marine riser modal decomposition method compressed sensing

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：