检索结果-南通市图书馆

Effect of small molecular surfactants on physical,turbidimetric,and rheological properties of Pickering nanoemulsions stabilized with whey protein isolate

引用

Food Bioscience 2023年第1期51卷 382-390页

作者： Yun Jeong Kim Bum-Keun Kim min hyeock lee Research Group of Food Processing Korea Food Research InstituteWanju-gunJeollabuk-do55365Republic of Korea Department of Food Biotechnology University of Science and TechnologyDaejeon34113Republic of Korea Department of Food Science and Biotechnology Kyung Hee UniversityYongin17104Republic of Korea

In the present study,Pickering nanoemulsions(oil-in-water)co-stabilized with whey protein isolate(WPI)and three types of small molecular surfactants were ***(CTAB),sodium dodecyl sulfate(SDS),and Tween 20 were used as cationic,anionic,and nonionic surfactants,*** investigate effects of small molecular surfactants on physical stability,turbidimetric,and rheological properties of protein-stabilized Pickering nanoemulsions,various treatments mimicking food processing including pH,heat,freeze-thaw,and salt were *** revealed that the droplet size and polydispersity index of the nanoemulsion prepared with WPI alone were increased after heat treatment or at pH condition near the isoelectric point of WPI,indicating a low physical ***,nanoemulsions prepared with WPI-SDS or WPI-CTAB maintained their initial state even after heat treatment including ***,there was no significant change in the droplet size of the nanoemulsion prepared with WPI-Tween after freeze-thaw and salt *** Pickering nanoemulsion stabilized with both WPI and SDS had the highest viscosity,Turbiscan stability index(TSI)was the ***,the TSI of the nanoemulsions added with CTAB or Tween 20 was lower than that of the nanoemulsions prepared with WPI alone,confirming that the storage stability of protein-stabilized Pickering nanoemulsion was improved by adding small molecular surfactants.

关键词： Whey protein isolate Surfactant Emulsion stability Environmental stress Turbidimetry Food processing

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Optimization of an Artificial Intelligence Database and Camera Installation for Recognition of Risky Passenger Behavior in Railway Vehicles

引用

Computers, Materials & Continua 2025年第1期82卷 1277-1293页

作者： min-kyeong Kim Yeong Geol lee Won-Hee Park Su-hwan Yun Tae-Soon Kwon Duckhee lee Railroad Test&Certification Division Korea Railroad Research Institute(KRRI)Cheoldo BangmulgwanroUiwang-si16105Republic of Korea Railroad Safety Division Korea Railroad Research Institute(KRRI)Cheoldo BangmulgwanroUiwang-si16105Republic of Korea

Urban railways are vital means of public transportation in *** than 30%of metropolitan residents use the railways,and this proportion is expected to *** enhance safety,the government has mandated the installation of closed-circuit televisions in all carriages by ***,cameras still monitored *** address this limitation,we developed a dataset of risk factors and a smart detection system that enables an immediate response to any abnormal behavior and intensive monitoring *** created an innovative learning dataset that takes into account seven unique risk factors specific to Korean railway *** data collection was conducted across the Shinbundang Line of the Incheon Transportation Corporation,and the Ui-Shinseol *** observed several behavioral characteristics and assigned unique annotations to *** also considered carriage *** performance was evaluated by camera placement and *** the camera installation plan was *** dataset will find immediate applications in domestic railway *** artificial intelligence algorithms will be verified shortly.

关键词： AI railway vehicle risk factor smart detection AI training data

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Comparative analyses of the venom components in the salivary gland transcriptomes and saliva proteomes of some heteropteran insects

引用

Insect Science 2022年第2期29卷 411-429页

作者： Kyungjae Andrew Yoon Woo-Jin Kim Seungki lee Hee-Sun Yang Byoung-Hee lee Si hyeock lee Research Institute of Agriculture and Life Sciences Seoul National UniversitySeoulKorea EntoCode Co. SeoulKorea National Institute of Biological Resources Environmental Research ComplexIncheonKorea Department of Agricultural Biology Seoul National UniversitySeoulKorea

Salivary gland-specific transcriptomes of nine heteropteran insects with distinct feeding strategies (predaceous, hematophagous, and phytophagous) were analyzed and annotated to compare and identify the venom components as well as their expression profiles. The transcriptional abundance of venom genes was verified via quantitative real-time PCR. Hierarchical clustering of 30 representative differentially expressed venom genes from the nine heteropteran species revealed unique groups of salivary gland-specific genes depending on their feeding strategy. The commonly transcribed genes included a paralytic neurotoxin (arginine kinase), digestive enzymes (cathepsin and serine protease), an anti-inflammatory protein (cystatin), hexamerin, and an odorant binding protein. Both predaceous and hematophagous (bed bug) heteropteran species showed relatively higher transcription levels of genes encoding proteins involved in proteolysis and cytolysis, whereas phytophagous heteropterans exhibited little or no expression of these genes, but had a high expression of vitellogenin, a multifunctional allergen. Saliva proteomes from four representative species were also analyzed. All venom proteins identified via saliva proteome analysis were annotated using salivary gland transcriptome data. The proteomic expression profiles of venom proteins were in good agreement with the salivary gland-specific transcriptomic profiles. Our results indicate that profiling of the salivary gland transcriptome provides important information on the composition and evolutionary features of venoms depending on their feeding strategy.

关键词： hematophagous heteroptera phytophagous predaceous proteome analysis salivary gland-specific venom transcriptome analysis

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

CopE and TLR6 RNAi-mediated tomato resistance to western flower thrips

引用

Journal of Integrative Agriculture 2023年第2期22卷 471-480页

作者： Jelli VENKATESH Sung Jin KIM Muhammad Irfan SIDDIQUE Ju Hyeon KIM Si hyeock lee Byoung-Cheorl KANG Department of Agriculture Forestry and BioresourcesResearch Institute of Agriculture and Life SciencesPlant Genomics Breeding InstituteCollege of Agriculture and Life SciencesSeoul National UniversitySeoul 08826Republic of Korea Department of Agricultural Biotechnology Seoul National UniversitySeoul 08826Republic of Korea Vegetable Research Division National Institute of Horticulture and Herbal ScienceRural Development AdministrationJeonju 55365Republic of Korea Research Institute of Agriculture and Life Sciences Seoul National UniversitySeoul 08826Republic of Korea

The western flower thrips(WFT;Frankliniella occidentalis)is a mesophyll cell feeder that damages many *** of WFT is complex due to factors such as high fecundity,short reproduction time,ability to feed on a broad range of host plants,and broad pesticide *** challenges have driven research into developing alternative pest control approaches for *** study analyzed the feasibility of a biological control-based strategy to manage WFT using RNA interference(RNAi)-mediated silencing of WFT endogenous *** the delivery of RNAi,we developed transgenic tomato lines expressing double-stranded RNA(dsRNA)of coatomer protein subunit epsilon(CopE)and Toll-like receptor 6(TLR6)from *** genes are involved in critical biological processes of WFT,and their dsRNA can be lethal to these insects when ingested *** WFT that fed on the transgenic dsRNAexpressing tomato flower stalk showed increased mortality compared with insects that fed on wild-type *** addition,WFT that fed on TLR6 and CopE transgenic tomato RNAi lines showed reduced levels of endogenous CopE and TLR6 transcripts,suggesting that their mortality was likely due to RNAi-mediated silencing of these ***,our findings demonstrate that transgenic tomato plants expressing dsRNA of TLR6 and CopE can be lethal to ***,suggesting that these genes may be deployed to control insecticide-resistant WFT.

关键词： coatomer protein subunit epsilon(CopE) Frankliniella occidentalis insect resistance RNA interference Toll-like receptor 6(TLR6) tomato transgenics

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effects of H_2/CO/CH_4 syngas composition variation on the NO_x and CO emission characteristics in a partially-premixed gas turbine combustor

引用

Science China(Technological Sciences) 2016年第12期59卷 1804-1813页

作者： lee min Chul Department of Safety Engineering College of EngineeringFire Disaster Prevention Research CenterIncheon National University

This paper reports the effects of variations in the fuel composition of H_2/CO/CH_4 syngas on the characteristics of NO_x and CO emissions in a partially-premixed gas turbine combustor. Combustion tests were conducted on a full range of fuel compositions by varying each component gas from 0% to 100% at heat inputs of 40 and 50 k Wth. Flame temperature, combustor liner temperature, ignition delay time, and flame structure were investigated computationally and experimentally to judge whether they are significant indicators of NO_x and CO formation. The characteristics of and reasons for NO_x and CO emissions were investigated by analyzing the emission mechanisms and relationships among fuel property, equivalence ratio, flame temperature, liner temperature, flame shape. The flame structures were investigated using the following flame visualization methods:(1) time-averaged OH* chemiluminescence and its Abel-deconvolution;(2) direct photography; and(3) instantaneous OH-PLIF. The flame structures were greatly changed by the fuel composition and heat input, and they were subjected to key affecting parameters of the temperatures of the flames and the liners. NO_x and CO emissions also largely varied according to fuel composition and heat input, showing neither linearly nor exponentially clear proportional trends toward the syngas compositions because of the singular conditions. For example, only the 100% CO flame at low load emitted lots of CO, whereas complete combustion was observed in other cases. However, the qualitative observations showed that the root causes of NO_x emission behaviors were flame temperature and flame structure, which were directly related to the residence time in the flame. Various sets of practical test results were obtained, and these results could contribute to the optimal selection of the fuel-feeding condition when fuel is changed from natural gas to syngas in order to minimize NO_x and CO emissions with stable combustion.

关键词： gas turbine combustor NO_x and CO emission synthetic gas OH* chemiluminescence planar laser induced fluorescence

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Densification simulation of compacted Al powders using multi-particle finite element method

引用

中国有色金属学会会刊：英文版 2009年第B09期19卷 68-75页

作者： Kyung-Hun lee Jung-min lee Byung-min KIM School of Mechanical Engineering Pu san National University

The powder compaction simulations were performed to demonstrate deformation behavior of particles and estimate the effect of different punch speeds and particle diameters on the relative density of powder by a multi-particle finite element model(MPFEM). Individual particle discretized with a finite element mesh allows for a full description of the contact mechanics. In order to verify the reliability of compaction simulation by MPFEM, the compaction tests of porous aluminum with average particle size of 20 μm and 3 μm were performed at different ram speeds of 5, 15, 30 and 60 mm/min by MTS servo-hydraulic tester. The results show that the slow ram speed is of great advantage for powder densification in low compaction force due to sufficient particle rearrangement and compaction force increases with decrease in average particle size of aluminum.

关键词：粉末压实粉末粒子多孔铝有限元法模拟致密化平均粒径有限元模型

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effects of elastic-plastic properties of materials on residual indentation impressions in nano-indentation using sharp indenter

引用

中国有色金属学会会刊：英文版 2012年第S3期22卷 585-595页

作者： Jung-min lee Chan-Joo lee Kyung-Hun lee Byung-min KIM Dongnam Regional Division Korea Institute of Industrial Technology Precision Manufacturing Systems Division Pusan National University School of Mechanical Engineering Pusan National University

One of the primary features of nano-indentation technique is that the contact area induced by an indenter is indirectly measured by a relationship between the penetration depth and the known geometry of the ***,this indirect measurement occasionally leads to inaccurate properties of the indented *** objective of this study is to investigate the effects of E/σr and the strain hardening exponents n of materials on the behaviors of pile-up and sink-in in nano-indentation and to predict n values of materials from the residual indentation *** relations between the residual indentation profile and n value of the indented material were identified by dimensional ***,they were numerically formulated using FE analysis of nano-indentation for 140 different combinations of elastic-plastic parameters such as E,σy and *** parameters of hrp/hm,herp/hm,Rr/hm and HO&P/Hreal were introduced as various dimensionless parameters to represent and quantify the residual indentation profile after *** were subsequently characterized as dimensionless functions using n and E/σr ***,the validity of these functions was verified through 3D FE analysis of nano-indentation for Al 6061-T6 and AISI 1010 materials.

关键词： nano-indentation pile-up sink-in strain hardening exponent FE simulation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

FEA technique of hot plate forming process using cell-typed die with cooling device

引用

中国有色金属学会会刊：英文版 2012年第S3期22卷 831-837页

作者： Jung-min lee In-Kyu lee Kyung-Hun lee Dae-Soon KIM Byung-min KIM Dongnam Regional Division Korea Institute of Industrial Technology School of Mechanical Engineering Pusan National University Industrial Technology Division Hyundai Heavy Industries

Hot plate forming using a cell-typed die is a process for forming a large thick plate with a spherical shape for the manufacture of a large spherical LNG ***-typed upper and lower dies made of a framework of steel plates fitted to make a grid pattern are used in this process,and an air-cooling device is separately installed inside the lower die.A finite element analysis (FEA) technique was developed,which included hot forming,air flow,cooling and thermal deformation analysis for the hot plate forming process using the cell-typed ***,the convective and interface heat transfer coefficients were used to reproduce analytically the effects of the cooling device in the hot plate forming analysis.A small-scale model test of the process was conducted to verify the FEA *** analysis results show that the curvature of the final plate agrees well with that of the designed experiment within a maximum relative error of 0.03% at the corner of the plate.

关键词： cell-typed die hot plate forming spherical LNG tank heat transfer coefficient

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Deformation prediction of porcelain-enameled steels with strain history by press forming and high-temperature behavior of coating layer

引用

中国有色金属学会会刊：英文版 2012年第S3期22卷 838-844页

作者： Young-Ki SON Chan-Joo lee Jung-min lee Byung-min KIM School of Mechanical Engineering Pusan National University Dongnam Regional Division Korea Institute of Industrial Technology

Porcelain enamel coatings were widely applied for the protection of steel products because they offered high corrosion protection,resistance to heat and abrasion,high hardness,hygiene and ease of *** typical process to produce enameled steels is roughly divided into two stages:the first stage consists of a forming process to give the desired shape to a steel substrate,and the second stage consists of a firing process to bond enamel frits on the *** firing process requires a high temperature above 800 °C,which may lead to austenitic transformation and severe thermal deformation of the steel *** aim of this study is to develop a finite element analysis (FE analysis) technique to predict the mechanical and thermal deformations of the enameled steels during forming and any further enameling process,including *** FE analysis involves analyzing the strain history of the steel substrate,which comprises the stress and thickness distributions of the substrate and its deformed shape,and the high-temperature behavior of the enamel coating *** validity of the FE analysis is verified through the U-bending test and firing test with various numbers and positions of enamel coating layers on the *** results reveal that the FE analysis results agree well with the experimental results with 8% error.

关键词： porcelain enamel firing process finite element analysis enameled steel thermal deformation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Multi-channel electromyography pattern classification using deep belief networks for enhanced user experience

引用

Journal of Central South University 2015年第5期22卷 1801-1808页

作者： SHIM Hyeon-min lee Sangmin Institute for Information and Electronic Research Inha University 100 Inharo Incheon 402-751 Korea Department of Electronic Engineering Inha University 100 Inharo Incheon 402-751 Korea

An enhanced algorithm is proposed to recognize multi-channel electromyography(EMG) patterns using deep belief networks(DBNs). It is difficult to classify the EMG features because an EMG signal has nonlinear and time-varying ***, in several previous studies, various machine-learning methods have been applied. A DBN is a fast, greedy learning algorithm that can find a fairly good set of weights rapidly, even in deep networks with a large number of parameters and many hidden layers. To evaluate this model, we acquired EMG signals, extracted their features, and then compared the model with the DBN and other conventional classifiers. The accuracy of the DBN is higher than that of the other algorithms. The classification performance of the DBN model designed is approximately 88.60%. It is 7.55%(p=9.82×10-12) higher than linear discriminant analysis(LDA) and 2.89%(p=1.94×10-5) higher than support vector machine(SVM). Further, the DBN is better than shallow learning algorithms or back propagation(BP), and this model is effective for an EMG-based user-interfaced system.

关键词： electromyography(EMG) pattern classification feature extraction deep learning deep belief network(DBN)

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：