检索结果-南通市图书馆

CES Transactions on Electrical Machines and Systems 2024年第1期8卷 12-21页

作者： Prabhakaran Koothu Kesavan Umashankar Subramaniam Dhafer j.Almakhles IEEE Renewable Energy Laboratory Department of Electrical EngineeringPrince Sultan UniversityRiyadh 12435Saudi Arabia

This paper,evaluate the effectiveness of a proposed speed loop pseudo derivative feedforward(PDFF)controller-based direct torque controller(DTC)for a PMSM drive against the performance of existing PI speed controller-based DTC and hysteresis current controller(HCC).The proposed PDFF-based speed regulator effectively reduces oscillation and overshoot associated with rotor angular speed,electromagnetic torque,and stator *** case studies,one using forward-to-reverse motoring operation and the other involving reverse-to-forward braking operation,has been validated to show the effectiveness of the proposed control *** proposed controller's superior performance is demonstrated through experimental verification utilizing an FPGA controller for a 1.5 kW PMSM drive laboratory prototype.

关键词： Direct torque control Pseudo derivative feedforward controller Permanent magnet synchronous motor(PMSM)

Mathematical modelling of ball and plate system with experimental and correlation function-based model validation

在线全文

学校读者我要写书评

暂无评论

Control Theory and Technology 2024年第2期22卷 326-341页

作者： T.R.Dil Kumar S.j.Mija Department of Electrical Engineering National Institute of Technology CalicutKozhikode673601KeralaIndia

The ball and plate system is an inherently nonlinear under actuated benchmark system used for validating the performance of various control schemes. A mathematical model depicting the dynamics close to that of the system is very much required for such a test bed. In this correspondence, the complete nonlinear model, a simplified nonlinear model, and a linearized model of the ball and plate system are developed. The system comprises a ball and plate mechanism and a rotary servo unit. The ball and plate mechanism is modelled using the Euler–Lagrange method, whereas the rotary servo subsystem is modelled from the first principles. The nonlinear model of the combined system is developed by including the dynamics of the servo motor with gear and rolling resistance between the ball and the plate. The simplified nonlinear model of the system is obtained with suitable assumptions. The model is linearized around the operating point using the jacobian. The validity of the developed models is investigated through correlation function analysis. The open-loop response of the three models, viz., nonlinear, simplified nonlinear, and linearized models, is analyzed in the MATLAB/Simulink platform. Since the open-loop system is unstable, the experimental validation of the model is performed with a double-loop PSO (particle swarm optimization) PID control scheme.

关键词： Ball and plate system Correlation function Model validation Particle swarm optimization(PSO) PSO PID controller

A Tutorial Review of the Solar Power Curve: Regressions, Model Chains, and Their Hybridization and Probabilistic Extensions

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Advances in Atmospheric Sciences 2024年第6期41卷 1023-1067页

作者： Dazhi YANG Xiang’ao XIA Martin jános MAYER School of Electrical Engineering and Automation Harbin Institute of TechnologyHarbin 150001HeilongjiangChina Key Laboratory for Middle Atmosphere and Global Environment Observation(LAGEO) Institute of Atmospheric PhysicsChinese Academy of SciencesBeijing 100029China Department of Energy Engineering Faculty of Mechanical EngineeringBudapest University of Technology and EconomicsMűegyetem rkp.3Budapest H-1111Hungary

Owing to the persisting hype in pushing toward global carbon neutrality,the study scope of atmospheric science is rapidly *** numerous trending topics,energy meteorology has been attracting the most attention *** essential skill of solar energy meteorologists is solar power curve modeling,which seeks to map irradiance and auxiliary weather variables to solar power,by statistical and/or physical *** this regard,this tutorial review aims to deliver a complete overview of those fundamental scientific and engineering principles pertaining to the solar power *** power curves can be modeled in two primary ways,one of regression and the other of model *** classes of modeling approaches,alongside their hybridization and probabilistic extensions,which allow accuracy improvement and uncertainty quantification,are scrutinized and contrasted thoroughly in this review.

关键词： review energy meteorology solar power curve model chain solar power prediction

Dissociation cross sections ofψ(3770),ψ(4040),ψ(4160),andψ(4415)mesons with nucleons

在线全文

学校读者我要写书评

暂无评论

Communications in Theoretical Physics 2024年第4期76卷 93-112页

作者： Ruo-Qing Ding Xiao-Ming Xu H j Weber Department of Physics Shanghai UniversityBaoshanShanghai 200444China Department of Physics University of VirginiaCharlottesvilleVA 22904United States of America

We study the dissociation of ψ(3770), ψ(4040), ψ(4160), and ψ(4415) mesons in collision with nucleons, which takes place in high-energy proton-nucleus collisions. The quark interchange between a nucleon and a ■ meson leads to the dissociation of the ■ meson. We consider the reactions:■, and■, where R stands for ψ(3770), ψ(4040), ψ(4160), or ψ(4415). A reaction of a neutron and a ■ meson corresponds to a reaction of a proton and the ■ meson by replacing the up quark with the down quark and vice versa. Transition-amplitude formulas are derived from the S-matrix *** cross sections are calculated with the transition amplitudes for scattering in the prior form and in the post form. The cross sections relate to nodes in the radial wave functions of ψ(3770), ψ(4040), ψ(4160), and ψ(4415) mesons.

关键词： inelastic nucleon-charmonium scattering quark interchange relativistic constituent quark potential model

Blood-brain barrier pathology in cerebral small vessel disease

在线全文

学校读者我要写书评

暂无评论

Neural Regeneration Research 2024年第6期19卷 1233-1240页

作者： Ruxue jia Gemma Solé-Guardia Amanda j.Kiliaan Department of Medical Imaging AnatomyRadboud University Medical CenterDonders Institute for BrainCognition&BehaviorCenter for Medical NeurosciencePreclinical Imaging Center PRIMERadboud Alzheimer CenterNijmegenthe Netherlands

Cerebral small vessel disease is a neurological disease that affects the brain microvasculature and which is commonly observed among the *** at first it was considered innocuous,small vessel disease is nowadays regarded as one of the major vascular causes of *** signs of small vessel disease include small subcortical infarcts,white matter magnetic resonance imaging hyperintensities,lacunes,enlarged perivascular spaces,cerebral microbleeds,and brain atrophy;however,great heterogeneity in clinical symptoms is observed in small vessel disease *** pathophysiology of these lesions has been linked to multiple processes,such as hypoperfusion,defective cerebrovascular reactivity,and blood-brain barrier ***,studies on small vessel disease suggest that blood-brain barrier dysfunction is among the earliest mechanisms in small vessel disease and might contribute to the development of the hallmarks of small vessel ***,the purpose of this review is to provide a new foundation in the study of small vessel disease ***,we discuss the main structural domains and functions of the blood-brain ***,we review the most recent evidence on blood-brain barrier dysfunction linked to small vessel ***,we conclude with a discussion on future perspectives and propose potential treatment targets and interventions.

关键词： blood-brain barrier dysfunction cerebral blood flow cerebral hypoperfusion endothelial dysfunction hypertension inflammation magnetic resonance imaging neurovascular unit oxidative stress small vessel disease tight junctions transcytosis

Lattice Boltzmann method formulation for simulation of thermal radiation effects on non-Newtonian Al_(2)O_(3) free convection in entropy determination

在线全文

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2024年第6期45卷 1085-1106页

作者： M.NEMATI M.SEFID A.KARIMIPOUR A.j.CHAMKHA Faculty of Mechanical Engineering Yazd UniversityYazd ***Iran Department of Mechanical Engineering Najafabad BranchIslamic Azad UniversityNajafabad ***Iran Faculty of Engineering Kuwait College of Science and TechnologyDoha 35004Kuwait

The simultaneous investigation on the parameters affecting the flow of electrically conductive fluids such as volumetric radiation,heat absorption,heat generation,and magnetic field(MF)is very vital due to its existence in various sectors of industry and *** present research focuses on mathematical modeling to simulate the cooling of a hot component through power-law(PL)nanofluid convection *** temperature reduction of the hot component inside a two-dimensional(2D)inclined chamber with two different cold wall shapes is *** formulation of the problem is derived with the lattice Boltzmann method(LBM)by code writing via the FORTRAN *** variables such as the radiation parameter(0–1),the Hartmann number(0–75),the heat absorption/generation coefficient(−5–5),the fluid behavioral index(0.8–1.2),the Rayleigh number(103–105),the imposed MF angle(0°–90°),the chamber inclination angle(−90°–90°),and the cavity cold wall shape(smooth and curved)are *** findings indicate that the presence of radiation increases the mean Nusselt number value for the shear-thickening,Newtonian,and shear thinning fluids by about 6.2%,4%,and 2%,*** most cases,the presence of nanoparticles improves the heat transfer(HT)rate,especially in the cases where thermal conduction dominates *** is the lowest cooling performance index and MF effect for the cavity placed at an angle of 90°.The application in the design of electronic coolers and solar collectors is one of the practical cases of this numerical research.

关键词： thermal performance analysis heat absorption/generation power-law(PL)Al_(2)O_(3)nanofluid magnetohydrodynamics natural convection volumetric radiation inclined cavity

Thermo-kinetic characteristics on stabilizing hetero-phase interface of metal matrix composites by crystal plasticity finite element method

在线全文

学校读者我要写书评

暂无评论

journal of Materials Science & Technology 2024年第2期169卷 53-67页

作者： Y.B.Zhang S.j.Song F.Liu State Key Laboratory of Solidification Processing Northwestern Polytechnical UniversityXi’an 710072China Analytical&Testing Center Northwestern Polytechnical UniversityXi’an 710072China

Using dislocation-based constitutive modeling in three-dimension crystal plasticity finite element(3D CPFE)simulations,co-deformation and instability of hetero-phase interface in different material systems were herein studied for polycrystalline metal matrix composites(MMCs).Local stress and strain fields in two types of 3layer MMCs such as fcc/fcc Cu-Ag and fcc/bcc Cu-Nb have been predicted under simple compressive ***,more severe strain-induced interface instability can be observed in the fcc/bcc systems than in the fcc/fcc systems upon refining to metallic nanolayered composites(MNCs).By detailed analysis of stress and strain localization,it has been demonstrated that the interface instability is always accompanied by high-stress concentration,i.e.,thermodynamic characteristics,or high strain prevention i.e.,kinetic characteristics,at the hetero-phase *** then follows that the thermodynamic driving forceG and the kinetic energy barrier Q during dislocation and shear banding can be adopted to classify the deformation modes,following the so-called thermo-kinetic *** by inserting a high density of high-energy interfaces into the Cu-Nb composites,such thermo-kinetic integration at the hetero-phase interface allows a successful establishment of MMCs with the high△G-high Q deformation mode,which ensures high hardening and uniform strain distri-bution,thus efficiently suppressing the shear band,stabilizing the hetero-phase interface,and obtaining an exceptional combination in strength and *** hetero-phase interface chosen by a couple of thermodynamics and kinetics can be defined as breaking the thermo-kinetic correlation and has been proposed for artificially designing MNCs.

关键词： Thermodynamics and kinetics Physics-based constitutive modeling Hetero-phase interface Crystal plasticity finite element

Stand dynamics of old-growth hemlock forests in central Bhutan are shaped by natural disturbances

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Forest Ecosystems 2024年第4期11卷 434-447页

作者： Karma Tenzin Craig R.Nitschke Kathryn j.Allen Raphael Trouve Thiet V.Nguyen Patrick j.Baker School of Agriculture Foodand Ecosystem SciencesUniversity of Melbourne500 Yarra BlvdRichmondVictoriaAustralia School of Geography Planningand Spatial SciencesUniversity of TasmaniaSandy BayTasmaniaAustralia Forest Science Institute of South Vietnam 1 Pham Van Hai StreetTan Binh DistrictHo Chi Minh CityViet Nam

Understanding how past disturbances have influenced the development of forests is critical for deciphering their current structure and composition and forecasting future *** this study,dendrochronological methods were applied to uncover the disturbance history of old-growth hemlock-dominated forests in central *** of tree-ring samples from two old-growth hemlock stands,located in two different topographic settings,identified the importance of gap-phase dynamics in facilitating recruitment and growth releases and producing complex,multi-aged structure s over *** site showed evidence of a near stand-replacing disturbance in the late 1700s,while the other showed no evide nce of high-severity disturbance at any time over the last 400 *** both sites low-to medium-severity disturbances,some of which appear to be associated with cyclones originating in the Bay of Bengal,dominated the disturbance *** hemlock stands exhibited a significant positive association between cyclone occurrence and growth release events and between recruitment pulses and growth release *** 1800 to 1970 there was an increase in recruitment of angiosperm tree species at most sites and a corresponding decline in conifer *** the past 50 years there has been little new recruitment;this may be due to light limitation in the understory from shade-tolerant angiosperms and bamboo in the lower strata of these *** variations in disturbance dynamics and recruitment were observed across the study sites,suggesting that other factors,such as topography and climate,may be influencing long-term stand development *** study highlights the complex interplay between historical disturbance regimes and tree recruitment in shaping the age and size structures of old-growth hemlock forests in central *** also provides new insights into the dynamics of these forests that can be used to support effective forest conservation and management i

关键词： Forest structure Hemlock forest Himalaya Natural disturbance

Generalized time-dependent generator coordinate method for induced fission dynamics

在线全文

学校读者我要写书评

暂无评论

Frontiers of physics 2024年第4期19卷 1-12页

作者： B.Li D.Vretenar T.Nikšić j.Zhao P.W.Zhao j.Meng State Key Laboratory of Nuclear Physics and Technology School of PhysicsPeking UniversityBeijing 100871China Physics Department Faculty of ScienceUniversity of Zagreb10000 ZagrebCroatia Center for Circuits and Systems Peng Cheng LaboratoryShenzhen 518055China

The generalized time-dependent generator coordinate method(TD-GCM)is extended to include pairing *** correlated GCM nuclear wave function is expressed in terms of time-dependent generator states and weight *** particle–hole channel of the effective interaction is determined by a Hamiltonian derived from an energy density functional,while pairing is treated dynamically in the standard BCS approximation with time-dependent pairing tensor and single-particle occupation *** the inclusion of pairing correlations,various time-dependent phenomena in open-shell nuclei can be described more *** model is applied to the description of saddle-to-scission dynamics of induced *** generalized TD-GCM charge yields and total kinetic energy distribution for the fission of 240Pu,are compared to those obtained using the standard time-dependent density functional theory(TD-DFT)approach,and with available data.

关键词： nuclear density functional theory generator coordinate method fission dynamics

In situ digital testing method for quality assessment of soft soil improvement with polyurethane

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

journal of Rock Mechanics and Geotechnical Engineering 2024年第5期16卷 1732-1748页

作者： X.F.Wang C.j.Wang W.V.Yue Z.j.Zhang Z.Q.Yue Department of Civil Engineering China University of Geosciences (Beijing)BeijingChina Department of Water Science and Engineering Zhengzhou UniversityZhengzhouChina Department of Geotechnical Engineering Tongji UniversityShanghaiChina Department of Civil Engineering The University of Hong KongChina

This study purposes an in situ testing method on quality assessment of soil *** drilling data includes the spatial distribution and in situ strength of untreated and treated soil along three different drillholes measured by on-site drilling monitoring *** factual drilling data can characterize the degree of soil improvement by penetration injection with permeable *** from on-site drilling monitoring shows that the linear zones represent constant drilling speeds shown in the plot of drill bit advancement *** drilling time,which indicates the spatial distributions of soil *** soil profile at the study site is composed of four layers,which includes fill,untreated silty clay,treated silty clay,and mucky *** results of soil profile are verified by the parallel site *** constant drilling speeds profile the coring-resistant strength of drilled *** comparing with the untreated silty clay,the constant drilling speeds of the treated silty clay have been decreased by 13.0-62.8%.Two drilling-speed-based indices of 61.2%and 65.6%are proposed to assess the decreased average drilling speed and the increased in situ strength of treated silty *** tests,*** compressive strength(UCS)test,have been performed with core sample to investigate and characterize in situ strength by comparing that with drilling *** show that the average predicted strengths of treated silty clay are 2.4-6.9 times higher than the average measured strength of untreated silty *** UCS-based indices of 374.5%and 344.2%verified the quality assessment(QA)results by this new in situ *** method provides a cost-effective tool for quality assessment of soil improvement by utilizing the digital drilling data.

关键词： Drilling process monitoring system Hydraulic rotary drilling process Constant drilling speed Soil improvement Quality assessment