检索结果-南通市图书馆

Journal of Iron and Steel Research International 2024年第9期31卷 2255-2270页

作者： meng-wei lu Xin Chen Wen-xi Liu Yu-ru Chen Qi Li Kai Wang Zu-min Wang Yuan Huang Institute of Advanced Metallic Materials School of Materials Science and EngineeringTianjin UniversityTianjin300350China

A medium-carbon low-alloy steel with designed chemical composition was *** steel exhibits an excellent product of strength and elongation value of 31,832 MPa%through quenching and partitioning treatment,with a tensile strength of 1413 MPa and elongation of 22%.X-ray diffraction analysis and transmission electron microscopy characterizations confirm that the retained austenite in the specimens undergoes stress-induced phase transformation to the martensite and hexagonal phases,namely the transformation-induced plasticity(TRIP)effect is *** TRIP effect,triggered by the stress-induced phase transition of retained austenite,is responsible for the excellent mechanical properties obtained in the *** further investigating the stress-induced phase transition mechanism,thermodynamic methods are *** free energy of face-centered cubic-Fe,ε-Fe,ω-Fe and body-centered cubic-Fe associated with the stress-induced phase transition was calculated using molecular dynamics simulations,and a calculation method of strain energy in thermodynamic units for the stress-induced martensitic transformation is *** final results reveal the process and thermodynamic mechanism of stress-induced martensitic transformation in medium-carbon steels,in which the hexagonal phase can participate in the process as an intermediate product.

关键词： Medium-carbon low-alloy steel Product of strength and elongation Stress-induced martensitic transformation Transformation-induced plasticity effect ω-Fe phase

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

高速高负荷压气机叶栅损失特性实验研究

工程热物理学报 2017年第8期38卷 1624-1633页

作者：唐雨萌柳阳威陆利蓬陆华伟北京航空航天大学能源与动力工程学院航空发动机气动热力国家级重点实验室北京100191 先进航空发动机协同创新中心北京100191 大连海事大学轮机工程学院大连116026

实验测量了某高速高负荷压气机叶栅两个马赫数(0.5884和0.5)下-8°、-6°、-4°、-1.69°、0°、2°、4°和8°共8个攻角的栅后流场,分析了其损失特性随着攻角的变化规律。结果表明:设计马赫数0.5884下,该叶栅低总压损失系数对应的攻角... 详细信息

实验测量了某高速高负荷压气机叶栅两个马赫数(0.5884和0.5)下-8°、-6°、-4°、-1.69°、0°、2°、4°和8°共8个攻角的栅后流场,分析了其损失特性随着攻角的变化规律。结果表明:设计马赫数0.5884下,该叶栅低总压损失系数对应的攻角范围较小,随着攻角往两端偏离最优攻角,叶栅损失很快就急剧增加;从2°到4°攻角,流场结构发生了改变,近叶中区域也开始发生了较大的分离,而近端区的角区分离反而减小,使得总压损失未迅速增加,而是基本不变;随着攻角进一步增大到8°,发展成了全叶高的大尺度分离流动,尾迹速度亏损急剧增大,总压损失也急剧增大。

关键词：高负荷高速叶栅压气机攻角特性实验研究

Joint Probabilistic Scheduling and Resource Allocation for Wireless Networked Control Systems

在线全文

学校读者我要写书评

暂无评论

IEEE/CAA Journal of Automatica Sinica 2025年第1期 258-260页

作者： meng Zheng Lei Zhang wei Liang IEEE the State Key Laboratory of Robotics and the Key Laboratory of Networked Control Systems Shenyang Institute of Automation Chinese Academy of Sciences the University of Chinese Academy of Sciences

Dear Editor,This letter presents a joint probabilistic scheduling and resource allocation method(PSRA) for 5G-based wireless networked control systems(WNCSs). As a control-aware optimization method, PSRA minimizes the linear quadratic Gaussian(LQG) control cost of WNCSs by optimizing the activation probability of subsystems, the number of uplink repetitions, and the durations of uplink and downlink phases. Simulation results show that PSRA achieves smaller LQG control costs than existing works.

关键词：

2013年芦山M_S7.0地震前后甲烷排放时空演化分析

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

地震学报 2017年第3期39卷 386-394页

作者：耿飞孟庆岩魏鸣卢显南京信息工程大学大气物理学院中国南京210044 中国科学院遥感与数字地球研究所中国北京100101 中国地震台网中心中国北京100045

为研究地震活动与大气甲烷浓度时空演变之间的关系,以芦山M_S7.0地震为例,基于极轨卫星AQUA上搭载的卫星大气红外探测器(AIRS)获取的甲烷数据产品,通过背景值差值法对该地震前后甲烷柱浓度信息、垂直浓度廓线信息及长时间序列变化信息... 详细信息

为研究地震活动与大气甲烷浓度时空演变之间的关系,以芦山M_S7.0地震为例,基于极轨卫星AQUA上搭载的卫星大气红外探测器(AIRS)获取的甲烷数据产品,通过背景值差值法对该地震前后甲烷柱浓度信息、垂直浓度廓线信息及长时间序列变化信息进行提取,挖掘芦山地震前后甲烷异常排放的时空演化特征.结果表明:2013年1—4月芦山震中区存在明显的甲烷浓度升高;甲烷浓度时空演化趋势为初始排放→激增扩散→聚敛加强→相对减弱→震后排放→回复平静;震前震中区甲烷柱浓度为该地区2008年1月—2016年8月异常最显著的时段.因此认为芦山M_S7.0地震前甲烷排放浓度升高现象或为该地震的前兆信息.

关键词：芦山地震异常遥感甲烷

Small modifications of endo-functionalized cavities lead to large changes in molecular interaction in water

在线全文

学校读者我要写书评

暂无评论

Science China Chemistry 2025年第1期68卷 369-376页

作者： Song-meng Wang Hao Nian Yan-Fang Wang Li-Shuo Zheng Yu-Tao Zheng Yi-wei Dong Liping Huang Xiaoping Wang wei Jiang Liu-Pan Yang Department of Chemistry Southern University of Science and Technology School of Chemistry and Pharmaceutical Sciences State Key Laboratory for Chemistry and Molecular Engineering of Medicinal ResourcesGuangxi Normal University School of Pharmaceutical Science Hengyang Medical School University of South China

Studying molecular recognition in aqueous environments is crucial for understanding biological processes. Herein, we present a series of N-doped endo-functionalized anthracene-based cavities by introducing inward-directed pyridine units. The subtle modifications can significantly affect the binding properties of these receptors, which is similar to the mutations in biological systems. Combining theoretical calculations and molecular recognition experiments demonstrated that these “mutations” have an impact on the hydrophobicity and charge distribution of the hosts, consequently significantly influencing molecular *** is crucial for understanding the intricate mechanisms of molecular-level interactions in biological receptors.

关键词： host-guest interaction hydrophobic effect endo-functionalized cavity mutation pyridine

The application of the Li2SiO3-Li4Ti5O12 composite in lithium-ion batteries

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

The application of the Li2SiO3-Li4Ti5O12 composite in lithiu...

De novo synthesis of atropisomeric benzofurans via Cu/SPDO complex catalyzed asymmetric formal [3 + 2] annulation

河南省化学会2016年学术年会

作者： Shuai Yang meng-wei lu Qiu-Fen Wang Juan Miao Tao Wen Jiu-Fang Sun Henan Polytechnic University

LiSiO modified LiTiO nanocomposites LiSiO-LiTiO(LSO-LTO) have been synthesized by a hydrothermal method. The composites were characterized by XRD, SEM, TEM and electrochemical methods. The XRD results show that pure Ti O2 and high crystalline Si-Ti O can be gained when sintered at 600 °C and at the atmosphere of air. High crystalline of LiSiO-LiTiO can be gained at the Li/Ti ratio of 6:1. The SEM and TEM results show that the LiTiO composites are respectively sphere and core-shell structure before and after Si doping. The particle sizes of the composite are reduced when doped by Si. In addition, At the first cycle, The discharge capacity of the LiSiO-LiTiO composite is 878.3 m Ah/g, which is much higher than the theoretical capacity of LiTiO(175 m Ah/g). The capacity retention of the LiSiO-LiTiO composite reaches up to 72.7%after 50 cycles, which is slightly lower than that of LiTiO(77.5%). Fig. 1 shows the initial charge and discharge curves of the electrodes made from LTO and LSO- LTO, respectively. The cell potential window is set between 0.01 V and 3.0 V vs Li+/Li at the current density of 150 m A /g.

关键词： Li2SiO3 Li4Ti5O12 anode material lithium-ion batteries

来源： cnki会议评论

在线全文

cnki会议

学校读者我要写书评

暂无评论

Science China Chemistry 2025年第1期68卷 174-180页

作者： Fan-Xiao meng Xing-Yu Wang Ka lu Ju-Song Yang Fu-Min Zhang Ai-Jun Ma Bao Du Yong-Qiang Tu State Key Laboratory of Applied Organic Chemistry College of Chemistry and Chemical Engineering Lanzhou University School of Chemistry and Chemical Engineering Shanghai Jiao Tong University School of Biotechnology and Health Sciences Wuyi University

Herein, the de novo synthesis of atropisomeric benzofurans through the Cu/spirocyclic-pyrrolidine-oxazoline(SPDO) complex catalyze asymmetric formal [3 + 2] cycloaddition between quinones and ynamides is explored, producing a range of structurally diverse axially chiral benzofurans in satisfactory yields with good to excellent enantioselectivities. Furthermore, density functional theory calculations were applied to explain the possible reaction mechanism.

关键词： benzofuran atropisomers novel de novo synthetic strategy asymmetric formal [3 + 2] cycladdition Cu/SPDO complex DFT calculations

节水型社会建设效果评估——以上海市闵行区为例

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

能源与节能 2013年第12期 104-105页

作者：魏孟露华东师范大学资源与环境科学学院上海200241

为了进一步深化上海市节水效果,拟对上海市闵行区2005年以来该区节水型社会建设情况进行效果评估。研究结果发现:闵行区用水效率呈逐年增长并保持较高效率,可仍与其它地区相比有差距。

关键词：节水型社会效果评估闵行区

From waste to wealth:Coal tar residue derived carbon materials as low-cost anodes for potassium-ion batteries

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2025年第2期32卷 464-475页

作者： Zhonghua lu Jun Shen Xin Zhang Lingcong Chao Liang Chen Ding Zhang Tao wei Shoudong Xu College of Chemical Engineering and Technology Taiyuan University of TechnologyTaiyuan 030024China College of Chemistry Taiyuan University of TechnologyTaiyuan 030024China School of Chemical Engineering and Pharmacy Wuhan Institute of TechnologyWuhan 430205China School of Energy and Power Jiangsu University of Science and TechnologyZhenjiang 212003China

Carbon materials are widely recognized as highly promising electrode materials for various energy storage system *** tar residues(CTR),as a type of carbon-rich solid waste with high value-added utilization,are crucially important for the development of a more sustainable *** this study,we employed a straightforward direct carbonization method within the temperature range of 700-1000℃to convert the worthless solid waste CTR into economically valuable carbon materials as anodes for potassium-ion batteries(PIBs).The effect of carbonization temperature on the microstructure and the potassium ions storage properties of CTR-derived carbons(CTRCs)were systematically explored by structural and morphological characterization,alongside electrochemical performances *** on the co-regulation between the turbine layers,crystal structure,pore structure,functional groups,and electrical conductivity of CTR-derived carbon carbonized at 900℃(CTRC-900H),the electrode material with high reversible capacity of 265.6m Ah·g^(-1)at 50 m A·g^(-1),a desirable cycling stability with 93.8%capacity retention even after 100 cycles,and the remarkable rate performance for PIBs were ***,cyclic voltammetry(CV)at different scan rates and galvanostatic intermittent titration technique(GITT)have been employed to explore the potassium ions storage mechanism and electrochemical kinetics of *** indicate that the electrode behavior is predominantly governed by surface-induced capacitive processes,particularly under high current densities,with the potassium storage mechanism characterized by an“adsorption-weak intercalation”*** work highlights the potential of CTR-based carbon as a promising electrode material category suitable for high-performance PIBs electrodes,while also provides valuable insights into the new avenues for the high value-added utilization of CTR.

关键词： coal tar residue carbon materials anode potassium-ion batteries high value-added

Bifunctional bridging capping layer enables 24.5% efficiency of perovskite solar cells with polymer-based hole transport materials

在线全文

学校读者我要写书评

暂无评论

Science China Chemistry 2025年第1期68卷 350-359页

作者： Can Zhu Yiyang Wang Lei meng Beibei Qiu Jing Li Shucheng Qin Ke Hu Xin Jiang Wenbin Lai Minchao Liu Zhe Liu Chenxing lu Jinyuan Zhang Yongfang Li Beijing National Laboratory for Molecular Sciences CAS Key Laboratory of Organic Solids Institute of Chemistry Chinese Academy of Sciences School of Chemical Science University of Chinese Academy of Sciences Key Laboratory of Solid State Optoelectronic Devices of Zhejiang Province College of Physics and Electronic Information Engineering Zhejiang Normal University Key Laboratory of Photochemical Conversion and Optoelectronic Materials Technical Institute of Physics and ChemistryChinese Academy of Sciences Laboratory of Advanced Optoelectronic Materials College of Chemistry Chemical Engineering and Materials ScienceSoochow University

Developing a bridge capping layer between perovskite and hole transport layer materials（HTMs） in the n-i-p perovskite solar cells（pero-SCs） is an effective approach to modify the morphology of HTMs and passivate the perovskite ***, we select the quinoxaline-based bifunctional passivation agent, quinoxalin-6-yl-methylamine hydrochloride（Qx MACl）,as the bridging layer, and a D-A copolymer PBQ12 containing the same quinoxaline unit as an HTM for the n-i-p pero-SCs. Due to the π-π stacking among the common quinoxaline units in the bridge layer and HTM, Qx MACl induces the π-π stacking of the PBQ12 film and improves the film morphology of HTMs with better conductivity. Additionally, Qx MACl can effectively passivate the perovskite surface, and PBQ12 possesses appropriate energy levels and high hole mobility. The pero-SCs based on FAPbI3with PBQ12/Qx MACl treatment showed a higher power conversion efficiency（PCE） of 24.05% and outstanding stability, maintaining 95.4% and 92.1% of its initial PCE after 750 h of storage and after over 800 h of thermal annealing at 85 °C, respectively. To further enhance the PCE of the PBQ12/Qx MACl-based devices, we developed a non-metal ion dopant for the PBQ12 HTM. Through trace doping of PBQ12 HTM by the non-metal ion dopant, the PCE of the PBQ12/Qx MACl-based devices reached 25.24%（the calibrated PCE of 24.55% by the National Institute of Metrology, China）.

关键词： D-A copolymer, hole transport materials, bifunctional bridge capping layer, passivation perovskite solar cells