检索结果-南通市图书馆

Hard-carbon hybrid Li-ion/metal anode enabled by preferred mesoporous uniform lithium growth mechanism

Journal of Energy Chemistry 2024年第1期88卷 252-259,I0006页

作者： Fang yan yan Liu Yuan Li yan Wang Zicen Deng meng Li Zhenwei Zhu Aohan Zhou Ting Li Jingyi Qiu Gaoping Cao Shaobo Huang Biyan Wang Hao Zhang School of Chemistry and Biological Engineering University of Science and TechnologyBeijing 100083China Research Institute of Chemical Defense Beijing 100191China College of Physics and Engineering Henan University of Science and TechnologyLuoyang 471023HenanChina National Base for International Science&Technology Cooperation School of ChemistryXiangtan UniversityXiangtan 411105HunanChina Materials and Manufacturing Department Beijing University of TechnologyBeijing 100124China

To achieve high energy density in lithium batteries,the construction of lithium-ion/metal hybrid anodes is a promising *** particular,because of the anisotropy of graphite,hybrid anode formed by graphite/Li metal has low transport kinetics and is easy to causes the growth of lithium dendrites and accumulation of dead Li,which seriously affects the cycle life of batteries and even causes safety ***,by comparing graphite with two types of hard carbon,it was found that hybrid anode formed by hard carbon and lithium metal,possessing more disordered mesoporous structure and lithophilic groups,presents better *** indicate that the mesoporous structure provides abundant active site and storage space for dead *** the synergistic effect of this structure and lithophilic functional groups(–COOH),the reversibility of hard carbon/lithium metal hybrid anode is maintained,promoting uniform deposition of lithium metal and alleviating formation of lithium *** hybrid anode maintains a 99.5%Coulombic efficiency(CE)after 260 cycles at a specific capacity of 500 m Ah/*** work provides new insights into the hybrid anodes formed by carbon-based materials and lithium metal with high specific energy and fast charging ability.

关键词： Hard carbon/Li metal hybrid anode Mesoporous structure Surface oxygen functional group Fast charging Lithium batteries

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Advances in seismological methods for characterizing fault zone structure

引用

Earthquake Science 2024年第2期37卷 122-138页

作者： yan cai Jianping Wu yaning Liu Shijie Gao Institute of Geophysics China Earthquake AdministrationBeijing 100081China Key Laboratory of Earthquake Source Physics China Earthquake AdministrationBeijing 100081China

Large earthquakes frequently occur along complex fault *** seismic rupture and long-term fault evolution requires constraining the geometric and material properties of fault zone *** provide a comprehensive overview of recent advancements in seismological methods used to study fault zone structures,including seismic tomography,fault zone seismic wave analysis,and seismicity *** conditions limit our current ability to fully characterize fault zones,for example,insufficient imaging resolution to discern small-scale anomalies,incomplete capture of crucial fault zone seismic waves,and limited precision in event location *** seismic arrays can overcome these limitations and enable more detailed investigations of fault zone ***,we present new insights into the structure of the Anninghe-Xiaojiang fault zone in the southeastern margin of the Qinghai-Xizang Plateau based on data collected from a dense seismic *** found that utilizing a dense seismic array can identify small-scale features within fault zones,aiding in the interpretation of fault zone geometry and material properties.

关键词： fault zone structure tomography fault zone wave seismic activity Anninghe-Xiaojiang fault zone

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Cross-border E-commerce and China's Exports during the COVID-19 Pandemic

引用

China & World Economy 2024年第3期32卷 215-242页

作者： Yi Che meng Yuan yan Zhang Lin Zhao School of Business East China University of Science and TechnologyChina School of Business Xiangtan UniversityChina School of Economics Shanghai University of Finance and EconomicsChina

China's exports experienced a rapid recovery after the outbreak of the 2019 COVID-19 pandemic.A primary engine was cross-border e-commerce(CBEC)trade,which bucked the downward export trend during the *** exploring the variation in the number of CBEC comprehensive pilot zones across provinces,we identified the causal impact of CBEC on exports using monthly province-product-destination data for 2019 and *** found strong and robust evidence that CBEC contributed to exports during the pandemic by promoting the expansion of incumbent exports(intensive margin)rather than through the expansion of product categories and exporting partners(extensive margin).Specifically,higher pandemic risk suppressed the role of CBEC at the intensive margin while enhancing it at the extensive *** to developed countries benefited more from CBEC,both intensively and *** with final products,a larger number of intermediate products were exported through CBEC after the outbreak of the pandemic.

关键词： China's exports COVID-19 pandemic cross-border e-commerce extensive margin of trade intensive margin of trade

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Flexible MXene/sodium alginate composite fabric with high structural stability and oxidation resistance for electromagnetic interference shielding

引用

Nano Research 2024年第6期17卷 5326-5335页

作者： Hao-Wen Zhang Lu-Yao yang meng-Lin Huang Ming-Hua Cheng Zhe-Sheng Feng Fanbin meng Zifeng Lin yan Wang School of Materials and Energy University of Electronic Science and Technology of ChinaChengdu 610054China Laboratory of Advanced Technologies of Materials(Ministry of Education) School of Materials Science and EngineeringSouthwest Jiaotong UniversityChengdu 610031China College of Materials Science and Engineering Sichuan UniversityChengdu 610065China

Wearable electromagnetic interference(EMI)shielding fabrics with excellent electromagnetic shielding performance,oxidation resistance,and structural stability are highly demanded for the rapid development of electronic devices and wireless *** are metallic conductive materials with exceptional EMI shielding properties,but they are prone to oxidation in air and have poor structural stability and durability on fabric ***,we present a one-step assembly method to fabricate fabrics coated with MXenes and polymeric sodium alginate(SA)composite(MXene-SA).SA protects MXenes from oxidation and forms a stable interlayer structure by bonding to *** MXene-SA coated fabrics are breathable and flexible,and have a low sheet resistance of 2.12±0.08Ω/sq and a high EMI shielding performance of 37.05 dB at X-band,which is comparable to the best 42.31 ***,the MXene-SA coated fabrics exhibit high structural stability and oxidation resistance under various conditions of sonication disintegration,mechanical abuse,chemical corrosion,and humidity,compared to pure MXenes coated *** believe that the wearable and high-performance MXene-SA fabrics have great potential for the next generation of ultra-portable and wearable EMI shielding products.

关键词： MXenes electromagnetic interference shielding fabric one-step assembly

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Three dimensional velocity model and its tectonic implications at China Seismic Experimental Site,eastern margin of the Tibetan Plateau

引用

Science China Earth Sciences 2024年第7期67卷 2268-2290页

作者： Jianping WU yan cai Wei WANG Weilai WANG Changzai WANG Lihua FANG yaning LIU Jing LIU Institute of Geophysics China Earthquake AdministrationBeijing 100081China Beijing Baijiatuan Earth Science National Observation and Research Station Beijing 1095China Beijing Earthquake Agency Beijing 100080China

The China Seismic Experimental Site(CSES)is located at the intersection of the Tibetan Plateau,South China Block,and Indian Plate and has complex geological settings and intense crustal deformation,making it one of the most seismically active areas in Chinese mainland.A high-resolution,three-dimensional(3D)crust-mantle velocity structure is crucial for understanding seismotectonic environments,lithospheric deformation mechanisms,and deep dynamic *** first constructed a high-vertical-resolution 3D initial velocity model using the joint inversion of receiver functions and surface waves and then obtained a 3D P-and S-wave velocity model(CSES-VM1.0)with the highest lateral resolution of 0.25°for the CSES using double-difference *** to the limitations of the Sn observation data,the resolution of the S-wave velocity model in the lower crust and upper mantle was reduced,making it closer to the initial model provided by joint inversion.A comparison with explosive-source seismic data showed that the synthetic P-wave first-arrival travel times of the new model were closer to the observations than those of the previous velocity *** velocity cross-sections across the source areas of the 2022 Lushan MS6.1 and Ludian MS6.8 earthquakes reveal that the former earthquake occurred near a weak contact zone between the Tibetan Plateau and Sichuan Basin,and the rupture of the latter earthquake occurred in a granitic area,with the northern end blocked by rigid high-velocity bodies.A clear high-velocity anomaly zone is distributed along the western margin of the yangtze Block,revealing the spatial distribution of Neoproterozoic intermediate-basic *** high-velocity zone significantly controls the morphology of fault zones and influences the rupture processes of major *** northeast-southwest and north-south trending high-velocity anomalies were found near Panzhihua,potentially related to Neoproterozoic and Middle-Late Permian intermediate

关键词： Eastern Tibetan Plateau China Seismic Experimental Site yangtze Block Velocity model Double-difference tomography

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Grain growth behavior and properties of high-entropy pseudobrookite(Mg,Co,Ni,Zn)Ti_(2)O_(5) ceramics

引用

Journal of Advanced Ceramics 2024年第6期13卷 757-768页

作者： Xiaohui Ma Jinyu Wu Lingyi meng Jinfeng Zhang Heng Chen Liwen yan Anran Guo Jiachen Liu Key Laboratory of Advanced Ceramics and Machining Technology of Ministry of Education School of Materials Science and EngineeringTianjin UniversityTianjin 300072China Xiamen Key Laboratory of Rare Earth Photoelectric Functional Materials Xiamen Institute of Rare Earth MaterialsHaixi InstitutesChinese Academy of SciencesXiamen 361021China

It is well known that the grain size of high-entropy ceramics is quite small owing to the sluggish diffusion effect. However, abnormal grain growth often occurs in high-entropy pseudobrookite ceramics, ultimately resulting in the formation of many abnormally grown grains with a grain size as large as 50 μm. To study this phenomenon, the grain growth behavior of high-entropy pseudobrookite ceramics was systematically investigated in this paper. The results demonstrate that the starting material powders first react with each other to form a high-entropy intermediate phase and calcined TiO_(2) powders (TiO_(2)-1100 ℃), and then as the sintering temperature increases, the formed high-entropy intermediate phase further reacts with TiO_(2)-1100 ℃ to form high-entropy pseudobrookite ceramics. Thus, in this system, in addition to the sluggish diffusion effect, the grain sizes of the high-entropy intermediate phase and TiO_(2)-1100 ℃ also affect the morphology of high-entropy pseudobrookite. Compared to nanosized TiO_(2), micron-sized TiO_(2) has a lower sintering activity. Therefore, the high-entropy intermediate phases (Mg,Co,Ni,Zn)TiO_(3) and TiO_(2)-1100 ℃ prepared with micron-sized starting materials exhibit lower grain sizes, finally resulting in the formation of high-entropy (Mg,Co,Ni,Zn)Ti_(2)O_(5) with small grain sizes. Moreover, nano-indentation and thermal conductivity tests were carried out on high-entropy (Mg,Co,Ni,Zn)Ti_(2)O_(5) with different morphologies. The results show that the hardness of high-entropy (Mg,Co,Ni,Zn)Ti_(2)O_(5) increases from 6.05 to 9.95 GPa as the grain size increases, whereas the thermal conductivity decreases from 2.091±0.006 to 1.583±0.006 W·m^(−1)·K^(−1). All these results indicate that high-entropy (Mg,Co,Ni,Zn)Ti_(2)O_(5) with a small grain size is a potential material for thermal protection.

关键词： grain size sluggish diffusion effect two-step solid phase process high-entropy intermediate phase high-entropy pseudobrookite ceramic

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Pillar effect induced by ultrahigh phosphorous/nitrogen doping enables graphene/MXene film with excellent cycling stability for alkali metal ion storage

引用

Journal of Energy Chemistry 2024年第6期93卷 146-156,I0004页

作者： meng Qin Yiwei Yao Junjie Mao Chi Chen Kai Zhu Guiling Wang Dianxue Cao Jun yan Key Laboratory of Superlight Materials and Surface Technology Ministry of EducationCollege of Materials Science and Chemical EngineeringHarbin Engineering UniversityHarbin 150001HeilongjiangChina Xiamen Key Laboratory of Rare Earth Photoelectric Functional Materials and Xiamen Institute of Rare Earth MaterialsHaixi InstituteChinese Academy of SciencesXiamen 361021FujianChina

Graphene's large theoretical surface area and high conductivity make it an attractive anode material for potassium-ion batteries(PIBs).However,its practical application is hindered by small interlayer distance and long ion transfer ***,this paper aims to address the issue by introducing MXene through a simple and scalable method for assembling graphene and realizing ultrahigh P doping *** findings reveal that MXene and P-C bonds have a "pillar effect" on the structure of graphene,and the P-C bond plays a primary *** addition,N/P co-doping introduces abundant defects,providing more active sites for K^(+) storage and facilitating K^(+) *** expected,the developed ultrahigh phosphorous/nitrogen co-doped flexible reduced graphene oxide/MXene(NPrGM) electrode exhibits remarkable reversible discharge capacity(554 mA hg^(-1) at 0.05 A g^(-1)),impressive rate capability(178 mA h g^(-1) at 2 A g^(-1)),and robust cyclic stability(0.0005% decay per cycle after 10,000 cycles at 2 A g^(-1)).Furthermore,the assembled activated carbon‖NPrGM potassium-ion hybrid capacitor(PIHC) can deliver an impressive energy density of 131 W h kg^(-1) and stable cycling performance with 98.1% capacitance retention after5000 cycles at 1 A g^(-1).Such a new strategy will effectively promote the practical application of graphene materials in PIBs/PIHCs and open new avenues for the scalable development of flexible films based on two-dimensional materials for potential applications in energy storage,thermal interface,and electromagnetic shielding.

关键词： Graphene MXene Phosphorous doping Pillar effect Potassium-ion batteries

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Virtual Coupling Trains Based on Multi-agent System Under Communication Delay

引用

Chinese Journal of Electronics 2024年

作者： Guodong QIN Xiangxi meng Tao WEN Baigen cai School of Automation and Intelligence Beijing Jiaotong University The Institute of System Research China Industrial Control Systems Cyber Emergency Response Team

With the rapid development of railway transportation, virtual coupling(VC) has become a popular research topic. VC can greatly reduce tracking distance and increase the line capacity. Under VC control, the train formation control not only considers the behavior and speed adjustment strategy of the leader train but also the communication delays between trains. The quality of data communication between trains is an important aspect of train tracking control. We consider a virtually coupled train set(VCTS) as a multi-agent system. The Luenberger observer is introduced to estimate the real-time state of the train, based on the estimation, the train control consistency protocol is designed to account for communication delays. The stability of the error system is proven by constructing a Lyapunov function. The consistency of the coordinated train control is verified through simulation.

关键词：

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Mechanism of a dual-phase Ti-Nb alloy exhibiting near-linear elastic deformation

引用

Rare Metals 2024年第5期43卷 2282-2289页

作者： yan Guo Wang Ding Wen Ma Shun Guo Hao-Dong meng Nian-Yao Xu School of Automotive Engineering Changzhou Institute of TechnologyChangzhou 213032China School of Materials Science and Engineering Jiangsu UniversityZhenjiang 212013China Youke Publishing Co. LtdChina Grinm Group Co.LtdBeijing 100088China

In this work,the underlying mechanism responsible for the near-linear elastic deformation behavior of a dual-phase Ti-Nb alloy consisting of β and α'' phase with large recoverable strain was systematically *** on in situ synchrotron X-ray diffraction(SXRD)analyses,it was found that besides intrinsic elastic deformation,a slight reversible β-α'' stress-induced martensitic(SIM)transformation,which proceeded in a consecutive mode under the retarding effect of micro-defects,took place during the near-linear elastic *** unloading,a small amount of residual macroscopic strain remained in the specimen due to the incomplete reverse α''→β transformation on *** high near-linear elastic deformability of the cold drawing(CD)Ti-Nb alloy has been revealed to be attributed to the coupling actions of intrinsic elasticity as well as the consecutive and reversible β-α'' SIM *** research may contribute to a new avenue for the design and development of novel dual-phase Ti-based alloys with desirable elastic deformability.

关键词： Titanium alloys Dual-phase Near-linear elastic deformation Martensitictransformation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Preparation and Characterization of Biobased Dehydroabietyl Polyethylene Glycol Glycidyl Ether-Grafted Hydroxyethyl Cellulose with High Emulsifying Property

引用

Journal of Renewable Materials 2024年第1期12卷 103-117页

作者： Zhengqing Ding Quan yang Xinyan yan Feng Gu Xujuan Huang Zhaosheng cai School of Chemical and Chemistry Yancheng Institute of TechnologyYancheng224051China

Dehydroabietyl polyethylene glycol glycidyl ether-grafted hydroxyethyl cellulose(HEC)polymer surfactant(DA(EO)5GE-g-HEC)was prepared using ring-opening polymerization with biobased rosin and hydroxyethyl cellulose as *** polyethylene glycol glycidyl ether(DA(EO)5GE)was formed by condensation of dehydroabietyl alcohol polyoxyethylene ether(Rosin derivative:DA(EO)5H)and *** grafting degree of DA(EO)5GE-g-HEC was manipulated by adjusting the mass ratio of HEC and DA(EO)5GE and confirmed by *** to the formula,when m(HEC)/m(DA(EO)2GE)was 1:1~1:5,the grafting rate of DA(EO)5GE in DA(EO)5GE-g-HEC varied from 34.43%to 38.33%.The surface activity and foam properties of DA(EO)5GE-g-HEC aqueous solution were *** results showed that with the increase in grafting rate,the critical micellar concentration(CMC)in aqueous solution changed from 1.28 to 0.96 g/*** results of the thermogravimetric analysis showed that the temperature range of the main stage of mass loss of DA(EO)5GE-g-HEC was 310°C~410°C,and the thermal decomposition processes of the samples with five mass ratios were *** oil in water emulsion was prepared by choosing cyclohexane as the oil phase and DA(EO)5GE-g-HEC as the *** effect of DA(EO)5GE-g-HEC mass fraction on emulsion particle size and stability was *** results suggested that when the oil-water ratio was 8:2 with 0.4%emulsifier,the emulsion droplets were the smallest in terms of particle size and were the most *** rheological test results showed that the apparent viscosity decreased with the increase in shear rate and showed a typical elastic gel phenomenon.

关键词： Rosin hydroxyethyl cellulose surfactant emulsion rheological behaviour

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：