检索结果-南通市图书馆

In situ polymerization preparation and mechanical properties of nanocomposites based on PA10T/10I-block-PEG copolymer and graphene oxide

引用

Nano Materials Science 2022年第3期4卷 276-284页

作者： Xiao-bo Fu Xin Tong Jia-cao Yang Gang zhang mei-lin zhang Xiao-jun Wang Jie Yang College of Polymer Science and Engineering Sichuan UniversityChengdu610065China Analytical and Testing Center Sichuan UniversityChengdu610064China Jiangsu JITRI Advanced Polymer Materials Research Institute Co. LtdChina State Key Laboratory of Polymer Materials Engineering Sichuan UniversityChengdu610065China

Poly(decamethylene terephthalamide/decamethylene isophthalamide)-block-polyvinyl alcoho)(PA10 T/10 IPEG) copolymer/graphene oxide(GO) composites were prepared via in-situ melt polymerization and two different nano-filler addition approaches were compared. The relationship between the micro-structure and performance of the elastomer composites prepared by one-step and two-step methods was explored. The results show that the two-step method significantly promoted the dispersion of the GO in a polymer matrix, and facilitated the grafting of more hard molecular chains. Thus, the elastic modulus and tensile strength of the nanocomposite have been significantly improved by the presence of GO. This was because of the strong interaction between the functional groups on the surface of the GO and the hard molecular chains. This would be also be favorable to load transfer across the interface. Additionally, the elongation at the break of composites increased by 10% with the addition of a small amount of GO(0.2% wt). This is because hard domains tend to be enriched on the surface of GO in composites and act as a lubricating layer at the interface between the GO and matrix, leading to increased deformation ability. This work provides an effective strategy to prepare elastomer composites with high strength and toughness.

关键词： Graphene oxide Thermoplastic elastomer In-situ polymerization Composite

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Sniffing with mass spectrometry

引用

Science Bulletin 2018年第20期63卷 1351-1357页

作者： Miao-Miao Chen Hai-Feng Su Ying Xie Li-Fang He Shui-Chao lin mei-lin zhang Cheng Wang Su-Yuan Xie Rong-Bin Huang Lan-Sun Zheng State Key Laboratory for Physical Chemistry of Solid Surfaces Collaborative Innovation Center of Chemistry for Energy Materials Department of Chemistry College of Chemistry and Chemical Engineering Xiamen University School of Information Science and Engineering Xiamen University

Gaseous compounds are usually on-line detectable on sensors. The limitations of conventional sensors are suffering from incapability for exactly identifying multiple components as well as incompatibility to possible toxicants in every odor sample. Herein, we discuss an inlet modification to the laboratory standard mass spectrometer, inspired by the sensitive olfactory systems of animals, for direct sniffing,established by connecting a mini pump to the nebulizer gas tubing. The modified mass spectrometry method—sniffing-mass spectrometry(sniffing-MS)—can acquire detailed fingerprint spectra of mixed odors and shows high tolerance to toxicants. Furthermore, the method has a low limit of detection in the order of parts per trillion and is a ‘sampling-free' technique for analyzing various gaseous compounds simultaneously, thus offering versatility for smelling daily commodities, tracking diffusion, and locating position of odors. Sniffing-MS can mimic or even surpass the olfaction of animals and is applicable for analyzing gaseous/volatile compounds, especially those polar compounds, in a simple manner depending on the intrinsic molecular mass-to-charge ratio.

关键词： Ambient mass spectrometry Volatile compounds Gas source locating On-line monitoring Olfaction

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Preparation of Low Ratio Magnesium Ccement by Acid Leaching Treatment of Boron Mud

引用

Journal of Wuhan University of Technology(Materials Science) 2025年第1期40卷 120-129页

作者： YANG mei zhang Mingzhe CHEN Hao School of Materials Science and Engineering Shenyang Jianzhu UniversityShenyang 110168China School of Physical Science and Technology Shenyang Normal UniversityShenyang 110168China

The effects of liquid-solid ratio and reaction time on the leaching rate of magnesium at room temperature were investigated,as well as the effects of the molar ratio of MgO/MgCl_(2),the amount of water added,and the amount of acid-impregnated slag dosed on the compressive strength and water resistance of *** results showed that the magnesium element in the boron mud could be maximally leached under the conditions of 1:1 concentration of hydrochloric acid at room temperature,liquid-solid ratio of 2.5 mL·g^(-1),and reaction time of 5 h,and the main products were amorphous SiO_(2) as well as a small amount of magnesium olivine which had not been completely *** LR-MOC prepared using the acid-soaked mixture could reach a softening coefficient of 0.85 for 28 d of water immersion when the molar ratio of MgO/MgCl_(2) was 2.2,the amount of water added was 0 g,and the acid-soaked slag dosing was 40 wt%,which also led to an appreciable late-strength,with an increase of 19.4%in compressive strength at 28 d compared to that at 7 *** previous studies,LR-MOC prepared in this way has a final strength phase that is not the more easily hydrolysed 3-phase but the lath-like *** this phenomenon,we analyzed the mechanism and found that,during the acid leaching process,a part of amorphous SiO_(2) dissolved in the acid leaching solution formed a silica sol,in which Mg^(2+)played a bridging role to make the silica sol more *** the addition and hydrolysis of MgO,the silica sol gel coagulation slows down,providing a capping layer to inhibit the hydrolysis of the 5-phase crystals and providing some strength after *** amorphous SiO_(2) in the other part of the acid-impregnated slag generated M-S-H gel with Mg^(2+)and OH-,which synergised with the dense structure composed of interlocking crystals to improve the water resistance of LR-MOC.

关键词： boron mud magnesium chloride-oxygen cement acid immersion water resistance silica sol

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Numerical Study of Flow and Heat Transfer Characteristics of Shell-and-Tube Molten Salt Electric Heater with Circularly Perforated Baffles

引用

Journal of Thermal Science 2025年第1期34卷 24-33页

作者： lin Yongjie zhang Cancan WU Yuting zhang Yi LU Yuanwei Key Laboratory of Heat Transfer and Energy Conversion National User-Side Energy Storage Innovation Research and Development CenterBeijing University of Technology

Numerical simulations of the flow and heat transfer characteristics of four shell-and-tube molten salt electric heaters with different perforation rates was ***-and-tube electric heaters have the same geometry and tube arrangement,and all of them use single segmental baffles,but there exist four different baffle openings（φ）,i.e.,0%,2.52%,4.06%,and 6.31%.The results indicated that the reasonable baffle opening could significantly reduce the shell-side pressure drop,effectively decreasing the shell-side flow dead zone *** can eliminate the local high-temperature phenomenon on the surface of electric heating tubes,but the heat transfer coefficient is slightly *** perforated schemes significantly reduce shell-side pressure drop compared to the baseline solution without open *** particular,the φ=6.31% scheme exhibits the optimal performance among all the schemes,with a maximum reduction of up to 50.50% in shell-side pressure drop relative to the unopened holes *** heat transfer coefficient is the highest for φ=0%,exhibiting a range of5.26% to 5.73%,5.14% to 5.99%,and 7.31% to 8.54% higher than φ=2.52%,4.06%,and 6.31%,respectively,within the calculated *** composite index h/（Δp）1/3was higher for all open-hole solutions than that for the unopened-hole *** best overall performance was for φ=6.31%,which improved the composite index by15.29% to 17.18% over the unopened-hole solution.

关键词： molten salt electric heater perforated baffles heat transfer

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Aerodynamic Optimization and Flow Mechanism for a Compressor Cascade at Low Reynolds Number

引用

Journal of Thermal Science 2025年第1期34卷 92-109页

作者： LI lin zhang Jianshe CHEN Caiyan TAN Wei zhang Yanfeng Key Laboratory of Light-Duty Gas-Turbine Institute of Engineering ThermophysicsChinese Academy of Sciences University of Chinese Academy of Sciences National Key Laboratory of Science and Technology on Advanced Light-duty Gas-turbine

Low-Reynolds-number effect is an important factor affecting the performance of compressors and other main components of high-altitude long-endurance unmanned aerial *** improve the flow condition and reduce flow loss under the condition of high altitude and low Reynolds number(Re),this paper proposes an optimization process based on a surrogate model,which combines the class-shape transformation method(CST),the Latin hypercube sampling(LHS) method,the light gradient-boosting machine algorithm(LightGBM),and a genetic algorithm(GA) to optimize a high-subsonic compressor *** surrogate model is verified to be accurate and can be used in the optimization *** accuracy of the GA is higher than the other algorithms under common test *** optimization results are verified by numerical simulation,and the flow differences before and after optimization are compared,especially the flow within the boundary *** changing the blade shape,the optimization process adjusts the loading distribution to delay the transition of the optimized blade on the suction surface,which changes the turbulent reattachment in the laminar separation bubble(LSB) into laminar ***,the mixing loss induced by the turbulent reattachment of the LSB and the wake loss of turbulent separation at the trailing edge are significantly reduced,and the performance of the compressor profile is finally *** addition,turbulent separation of the optimized profile is delayed reducing the range of the wake region on the suction *** this optimization process,the reduction of total pressure loss coefficient at Re of 2.5×10～5,3.5×10～5,and 4.5×10～5 are 16.32%,20.76%,and 22.16%,respectively.

关键词： Reynolds number

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Altered expression of nuclear matrix proteins in etoposide induced apoptosis in HL-60 cells

引用

Cell Research 2001年第2期11卷 125-134页

作者： JIN mei lin, PING zhang, MING XIAO DING, JING PING YUN, PEI FANG CHEN, YEUK HON CHEN, YIN QING CHEW College of Animal Science and Veterinary Medicine, Huazhong Agricultural University, Wuhan 430070, China College of Life Sciences, Beijing University, Beij College of Animal Science and Veterinary Medicine Huazhong Agricultural University Wuhan China Chinese University of Hong Kong Hong Kong China College of Life Sciences Beijing University Beijing China

The events of cell death and the expression of nuclear matrix protein (NMP) have been investigated in a promyelocytic leukemic cell line HL-60 induced with etoposide. By means of TUNEL assay, the nuclei displayed a characteristic morphology change, and the amount of apoptotic cells increased early and reached maximun about 39% after treatment with etoposide for 2 h. Nucleosomal DNA fragmentation was observed after treatment for 4 h. The morphological change of HL-60 cells, thus, occurred earlier than the appearance of DNA ladder. Total nuclear matrix proteins were analyzed by 2-dimensional gel electrophoresis. Differential expression of 59 nuclear matrix proteins was found in 4 h etoposide treated cells. Western blotting was then performed on three nuclear matrix acssociated proteins, PML, HSC70 and NuMA. The expression of the suppressor PML protein and heat shock protein HSC70 were significantly upregulated after etoposide treatment, while NuMA, a nuclear mitotic apparatus protein, was down regulated. These results demonstrate that significant biochemical alterations in nuclear matrix proteins take place during the apoptotic process.

关键词： Nuclear matrix protein etoposide apoptosis HL-60 cell.

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Microstructural evolution during the progressive transformation-induced plasticity effect in a Fe-0.1C-5Mnmedium manganese steel

引用

International Journal of Minerals,Metallurgy and Materials 2025年第2期32卷 369-379页

作者： mei zhang Wenhao Li Yangfei Chen Yang Jiang Xiaofei Guo Han Dong School of Materials Science and Engineering Shanghai UniversityShanghai 200444China State Key Laboratory of Advanced Special Steel Shanghai UniversityShanghai 200444China

The microstructural evolution of a cold-rolled and intercritical annealed medium-Mn steel(Fe-0.10C-5Mn)was investigated during uniaxial tensile ***-situ observations under scanning electron microscopy,transmission electron microscopy,and X-ray diffraction analysis were conducted to characterize the progressive transformation-induced plasticity process and associated fracture initiation *** findings were discussed with the local strain measurements via digital image *** results indicated that Lüders band formation in the steel was limited to 1.5%strain,which was mainly due to the early-stage martensitic phase transformation of a very small amount of the less stable large-sized retained austenite(RA),which led to localized stress concentrations and strain hardening and further retardation of *** small-sized RA exhibited high stability and progressively transformed into martensite and contributed to a stably extended Portevin-Le Chatelier *** volume fraction of RA gradually decreased from 26.8%to 8.2%prior to *** the late deformation stage,fracture initiation primarily occurred at the austenite/martensite and ferrite/martensite interfaces and the ferrite phase.

关键词： medium-Mn steel retained austenite progressive transformation-induced plasticity effect local strain fracture initiation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

MixerKT:A Knowledge Tracing Model Based on Pure MLP Architecture

引用

Computers, Materials & Continua 2025年第1期82卷 485-498页

作者： Jun Wang Mingjie Wang Zijie Li Ken Chen Jiatian mei Shu zhang Key Laboratory of Education Informatization for Nationalities Ministry of EducationYunnan Normal UniversityKunming650000China Yunnan Key Laboratory of Smart Education Yunnan Normal UniversityKunming650000China

In the field of intelligent education,the integration of artificial intelligence,especially deep learning technologies,has garnered significant *** tracing(KT)plays a pivotal role in this field by predicting students’future performance through the analysis of historical interaction data,thereby assisting educators in evaluating knowledgemastery and tailoring instructional *** knowledge tracingmethods,largely based on Recurrent Neural Networks(RNNs)and Transformer models,primarily focus on capturing long-term interaction patterns in sequential ***,these models may neglect crucial short-term dynamics and other relevant *** paper introduces a novel approach to knowledge tracing by leveraging a pure Multilayer Perceptron(MLP)*** proposeMixerKT,a knowledge tracing model based on theHyperMixer framework,which uniquely integrates global and localMixer feature *** architecture enables more effective extraction of both long-terminteraction trends and recent learning behaviors,addressing limitations in currentmodels thatmay overlook these key *** evaluations on twowidely-used datasets,ASSIS Tments2009 and Algebra2005,demonstrate that MixerKT consistently outperforms several state-of-the-art models,including DKT,SAKT,and Separated Self-Attentive Neural Knowledge Tracing(SAINT).Specifically,MixerKT achieves higher prediction accuracy,highlighting its effectiveness in capturing the nuances of learners’knowledge *** results indicate that our model provides a more comprehensive representation of student learning patterns,enhancing the ability to predict future performance with greater precision.

关键词： Knowledge tracing multilayer perceptron channel mixer sequence mixer

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

CSI理论框架下农户农地转出满意度影响因素分析——以武汉城市圈典型地区调查为例

引用

中国土地科学 2017年第2期31卷 67-76页

作者：陈璐甘臣林梅昀张苗华中农业大学公共管理学院湖北武汉430070

研究目的:探索农地转出中农户满意度的形成过程与机理,从农户主观感受视角来定量分析农地流转政策的制约因素。研究方法:基于顾客满意度指数(Customer Satisfaction Index,CSI)理论框架,构建农户农地流转满意度指数(Farmer Satisfaction... 详细信息

研究目的:探索农地转出中农户满意度的形成过程与机理,从农户主观感受视角来定量分析农地流转政策的制约因素。研究方法:基于顾客满意度指数(Customer Satisfaction Index,CSI)理论框架,构建农户农地流转满意度指数(Farmer Satisfaction Index,FSI)模型,运用结构方程模型(Structural Equation Model,SEM)进行定量分析。研究结果:农户对农地转出的感知质量是影响其满意度的决定因素,可靠性是关键因素,政府形象与印象感知是重要因素,人员互动是有效因素。研究结论:要加强农村社会保障制度建设以确保农民获得公平的社会保障,规范流转程序、健全流转监督机制、保护农民利益,加强政府廉政建设以改善政府形象以提高农户满意度,促进农地转出。

关键词：土地经济农地流转 CSI 农户满意度结构方程模型武汉城市圈

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Flexible Graphene Field‑Effect Transistors and Their Application in Flexible Biomedical Sensing

引用

Nano-Micro Letters 2025年第2期17卷 252-313页

作者： Mingyuan Sun Shuai Wang Yanbo Liang Chao Wang Yunhong zhang Hong Liu Yu zhang lin Han Institute of Marine Science and Technology Shandong UniversityQingdao 266237ShandongPeople’s Republic of China State Key Laboratory of Crystal Materials Shandong UniversityJinan 250100ShandongPeople’s Republic of China School of Integrated Circuits Shandong UniversityJinan 250100ShandongPeople’s Republic of China Shandong Engineering Research Center of Biomarker and Artificial Intelligence Application Jinan250100ShandongPeople’s Republic of China

Flexible electronics are transforming our lives by making daily activities more *** to this innovation are field-effect transistors(FETs),valued for their efficient signal processing,nanoscale fabrication,low-power consumption,fast response times,and ***,known for its exceptional mechanical properties,high electron mobility,and biocompatibility,is an ideal material for FET channels and *** combination of graphene and FETs has given rise to flexible graphene field-effect transistors(FGFETs),driving significant advances in flexible electronics and sparked a strong interest in flexible biomedical ***,we first provide a brief overview of the basic structure,operating mechanism,and evaluation parameters of FGFETs,and delve into their material selection and patterning *** ability of FGFETs to sense strains and biomolecular charges opens up diverse application *** specifically analyze the latest strategies for integrating FGFETs into wearable and implantable flexible biomedical sensors,focusing on the key aspects of constructing high-quality flexible biomedical ***,we discuss the current challenges and prospects of FGFETs and their applications in biomedical *** review will provide valuable insights and inspiration for ongoing research to improve the quality of FGFETs and broaden their application prospects in flexible biomedical sensing.

关键词： Flexible Graphene Field-effect transistor Wearable Implantable Biosensor

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：