检索结果-南通市图书馆

Efficiency-based Pareto Optimization of Building Energy Consumption and Thermal Comfort:A Case Study of a Residential Building in Bushehr,Iran

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Thermal Science 2024年第3期33卷 1037-1054页

作者： masoud NASOURI Navid DELGARM Department of Environment University of TehranAras International CampusP.O.Box ***TehranIran Department of Mechanical and Aerospace Engineering Malek-Ashtar University of TechnologyP.O.Box 83145/115IsfahanIran

In Iran,the intensity of energy consumption in the building sector is almost 3 times the world average,and due to the consumption of fossil fuels as the main source of energy in this sector,as well as the lack of optimal design of buildings,it has led to excessive release of toxic gases into the *** research develops an efficient approach for the simulation-oriented Pareto optimization(SOPO)of building energy efficiency to assist engineers in optimal building design in early design *** this end,EnergyPlus,as one of the most powerful and well-known whole-building simulation programs,is combined with the Multi-objective Ant Colony Optimization(MOACO)algorithm through the JAVA programming *** a result,the capabilities of JAVA programming are added to EnergyPlus without the use of other plugins and third *** evaluate the effectiveness of the developed method,it was performed on a residential building located in the hot and semi-arid region of *** obtain the optimum configuration of the building under investigation,the building rotation,window-to-wall ratio,tilt angle of shading device,depth of shading device,color of the external walls,area of solar collector,tilt angle of solar collector,rotation of solar collector,cooling and heating setpoints of heating,ventilation,and air conditioning(HVAC)system are chosen as decision ***,the building energy consumption(BEC),solar collector efficiency(SCE),and predicted percentage of dissatisfied(PPD)index as a measure of the occupants'thermal comfort level are chosen as the objective *** single-objective optimization(SO)and Pareto optimization(PO)are *** obtained results are compared to the initial values of the basic *** optimization results depict that the PO provides optimal solutions more reliable than those obtained by the SOs,owing to the lower value of the deviation ***,the optimal solutions extracted through the PO are depicted in the

关键词： building energy consumption thermal comfort collector efficiency simulation-oriented pareto optimization

Seismic control of multi-degrees-of-freedom structures by vertical mass isolation method using MR dampers

在线全文

学校读者我要写书评

暂无评论

Earthquake Engineering and Engineering Vibration 2024年第2期23卷 503-510页

作者： Mohamad Shahrokh Abdi masoud Nekooei Mohammad-Ali Jafari Department of Civil Engineering Marivan BranchIslamic Azad UniversityMarivan ***Iran Department of Civil Engineering Science and Research BranchIslamic Azad UniversityTehran ***Iran Structural Department of Transmission and Distribution Research Center Niroo Research Institute(NRI)Tehran ***Iran

Vertical mass isolation(VMI)is one of the novel methods for the seismic control of *** this method,the entire structure is assumed to consist of two mass and stiffness subsystems,and an isolated layer is located among *** this study,the magnetorheological damper in three modes:passive-off,passive-on,and semi-active mode with variable voltage between zero and 9 volts was used as an isolated layer between two ***-degrees-of-freedom structures with 5,10,and 15 floors in two dimensions were examined under 11 pairs of near field *** each level,the displacement of MR dampers was taken into *** responses of maximum displacement,maximum inter-story drift,and maximum base shear in controlled and uncontrolled buildings were compared to assess the suggested approach for seismic control of the *** to the results,the semi-active control method can reduce the response by more than 12%compared to the uncontrolled mode in terms of maximum displacement of the mass subsystem of the *** method can reduce more than 16%and 20%of the responses compared to the uncontrolled mode in terms of maximum inter-story drift and base shear of the structure,respectively.

关键词： seismic control vertical mass isolation base shear magnetorheological damper semi-active control

On Polar Decomposition of Tensors with Einstein Product and a Novel Iterative Parametric Method

在线全文

学校读者我要写书评

暂无评论

Numerical Mathematics(Theory,Methods and Applications) 2024年第1期17卷 69-92页

作者： Raziyeh Erfanifar masoud Hajarian Khosro Sayevand Department of Applied Mathematics Faculty of Mathematical SciencesShahid Beheshti UniversityTehranIran Faculty of Mathematics and Statistics Malayer UniversityMalayerIran

This study aims to investigate the polar decomposition of tensors with the Einstein product for theﬁrst *** polar decomposition of tensors can be computed using the singular value decomposition of the tensors with the Einstein *** the following,some iterative methods forﬁnding the polar decomposi-tion of matrices have been developed into iterative methods to compute the polar decomposition of ***,we propose a novel parametric iterative method toﬁnd the polar decomposition of *** the obtained conditions,we prove that the proposed parametric method has the order of convergence *** every iteration of the proposed method,only four Einstein products are required,while other iterative methods need to calculate multiple Einstein products and one tensor inversion in each ***,the new method is superior in terms of efﬁciency ***,the numerical comparisons performed among several well-known methods,show that the proposed method is remarkably efﬁcient and accurate.

关键词： Iterative methods Einstein product polar decomposition of a tensor polar factor order of convergence

A Novel Iterative Method to Find theMoore-Penrose Inverse of a Tensor with Einstein Product

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Numerical Mathematics(Theory,Methods and Applications) 2024年第1期17卷 37-68页

In this study,based on an iterative method to solve nonlinear equations,a third-order convergent iterative method to compute the Moore-Penrose inverse of a tensor with the Einstein product is presented and *** compar-isons of the proposed method with other methods show that the average number of iterations,number of the Einstein products,and CPU time of our method are considerably less than other *** some applications,partial and fractional differential equations that lead to sparse matrices are considered as *** use the iterates obtained by the method as a preconditioner,based on tensor form to solve the multilinear system A∗N X=***,several practical numerical examples are also given to display the accuracy and efﬁciency of the new *** presented results show that the proposed method is very robust for obtaining the Moore-Penrose inverse of tensors.

关键词： Tensor iterative methods Moore-Penrose inverse Einstein product

Study on detecting main ingredients of silicone rubber based on terahertz spectrum

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

High Voltage 2024年第3期9卷 518-527页

作者： Hongwei Mei Lanxin Li Fanghui Yin Liming Wang masoud Farzaneh Shenzhen International Graduate School(SIGS) Tsinghua UniversityShenzhenGuangdongChina Kunming Power Exchange Center KunmingYunnanChina Department of Applied Sciences(DSA) University of Quebec at ChicoutimiChicoutimiQuebecCanada

The authors investigated the ingredient detection technique of silicone rubber based on the Terahertz *** this purpose,18 diverse high-temperature vulcanised silicone rubber(HTVSR)formulations were customised,8 of which are used as calibration set while the rest 10 as prediction *** on the Beer-Lambert Law,the partial-least-square(PLS)regression model and the least-squares support-vector machines(LS-SVM)regression model were used to yield the relationships between the absorption spectrums and the content percentages of polydimethylsiloxane(PDMS),alumina tri-hydrate(ATH),and silica in *** results showed that for the formulations tested,the prediction accuracy of all three main ingredients by the PLS regression model could be improved by changing the spectrum range from 0.2–4 to 0.5–2 *** the data were pre-processed by the Savitzky–Golay smoothing method or multiplicative scatter correction method,the prediction accuracy of PDMS could be further ***,this would lead to a slight decrease in the prediction accuracy of *** the LS-SVM regression model,the radial basis function(RBF)kernel and the linear kernel were *** was found that the prediction accuracy of both kernels was better than that of the PLS regression *** the LS-SVM regression model using the RBF kernel,the correlated coefficients of PDMS and ATH in the prediction set could be up to 0.9915 and 0.9742,respectively.

关键词： rubber spectrum kernel

Physiology of medicinal and aromatic plants under drought stress

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

The Crop Journal 2024年第2期12卷 330-339页

作者： Zohreh Emami Bistgani Allen V.Barker masoud Hashemi Isfahan Agricultural and Natural Resources Research and Education Center Agricultural Research Education and Extension Organization(AREEO)Isfahan 81748-35117Iran Stockbridge School of Agriculture University of MassachusettsAmherstMA 01002USA

Drought poses a significant challenge,restricting the productivity of medicinal and aromatic *** strain induced by drought can impede vital processes like respiration and photosynthesis,affecting various aspects of plants’growth and *** response to this adversity,medicinal plants employ mechanisms such as morphological and structural adjustments,modulation of drought-resistant genes,and augmented synthesis of secondary metabolites and osmotic regulatory substances to alleviate the *** water scarcity can lead to leaf wilting and may ultimately result in plant *** cultivation and management of medicinal plants under stress conditions often differ from those of other *** is because the main goal with medicinal plants is not only to increase the yield of the above-ground parts but also to enhance the production of active ingredients such as essential *** elucidate these mechanisms of drought resistance in medicinal and aromatic plants,the current review provides a summary of recent literature encompassing studies on the morphology,physiology,and biochemistry of medicinal and aromatic plants under drought conditions.

关键词： Drought stress Medicinal and aromatic plants Phytochemistry Physiology

Recycling of Silicone Rubber from Composite Insulator with Pyrolysis Method

在线全文

学校读者我要写书评

暂无评论

CSEE Journal of Power and Energy Systems 2024年第4期10卷 1787-1798页

作者： Ruiqi Shang Liming Wang Fanghui Yin masoud Farzaneh Institute of Advanced Technologies in Energy and Electrical Engineering(IAT3E) Shenzhen International Graduate SchoolTsinghua UniversityShenzhen 518055China Department of Applied Sciences(DSA) University of Quebec at ChicoutimiChicoutimiQC G7H2B1Canada

Composite insulators have been widely used in transmission *** being removed from transmission lines,their housing silicone material cannot degrade *** tackle this problem,this paper proposes an effective method to recycle waste insulators by pyrolysis to obtain mullite(3Al_(2)O_(3)·2SiO_(2))with high purity and compact *** recycling process studied will not generate toxic *** thermal degradation process of housing material is investigated by analyzing its degradation products including the gas and residues in *** experimental results indicate that the colorant agent Fe2O3 inside the housing material is beneficial for the generation of mullite by decreasing the temperature of ***,since the transitional alumina generated by the dehydration of aluminum hydroxide(ATH)has a smaller diameter and can better dissolute into the silica phases,ATH is a better choice as the additional aluminum *** comparing the components,structure,and particle size of grains formed at different calcination temperatures,the proposed pyrolysis temperatures of the two stages are 1400◦C and 1600◦C,respectively.

关键词： Composite insulator mullite pyrolysis recycling silicone rubber sintering

High-resolution photogrammetry to measure physical aperture of two separated rock fracture surfaces

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Rock Mechanics and Geotechnical Engineering 2024年第8期16卷 2922-2934页

作者： masoud Torkan Mateusz Janiszewski Lauri Uotinen Alireza Baghbanan Mikael Rinne Department of Civil Engineering Aalto UniversityEspooFinland Department of Mining Engineering Isfahan University of TechnologyIsfahanIran

Photogrammetry,reconstructing three-dimensional(3D)models from overlapping two-dimensional(2D)photos,finds application in rock mechanics and rock engineering to extract geometrical details of reconstructed objects,for example rock *** properties are important for determining the mechanical stability,permeability,strength,and shear behavior of the rock *** can be used to reconstruct detailed 3D models of two separated rock fracture surfaces to characterize fracture roughness and physical aperture,which controls the fluid flow,hydromechanical and shear behavior of the rock *** research aimed to determine the optimal number of scale bars required to produce high-precision 3D models of a fracture surface.A workflow has been developed to define the physical aperture of a fracture using *** blocks of Kuru granite(25 cm×25 cm×10 cm)with an artificially induced fracture,were *** scaling 3D models,321 markers were used as ground control points(GCPs)with predefined distances on each *** the samples were wellmatched in their original positions,the entire block was *** data of the GCPs were extracted from the 3D model of the *** half was surveyed separately and georeferenced by GCPs and merged into the same coordinate *** fracture surfaces were extracted from the 3D models and the vertical distance between the two surfaces was digitally calculated as physical *** assessment of the photogrammetric reconstruction showed a 20-30 mm digital control distance accuracy when compared to known distances defined between *** attain this accuracy,the study found that at least 200 scale bars were ***,photogrammetry was employed to measure changes in aperture under normal *** results obtained from this approach were found to be in good agreement with those obtained using linear variable displacement transducers(LVDTs),with differences ran

关键词： Photogrammetry Physical aperture Rock fracture Predefined distances Markers

Platform Evolution in an Oligo-Miocene Back-arc Basin:An Example from the Central Iran Basin

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Acta Geologica Sinica(English Edition) 2024年第1期98卷 185-206页

作者： masoud SHARIFI-YAZDI Amirhossein ENAYATI Jamal SALEHI AGHDAM Mohammad BAHREHVAR Seyed Mustafa REZAEI Department of Geology Faculty of Earth SciencesGeography and AstronomyUniversity of Vienna1090 Vienna.Austria Geology and Geophysics Department Tehran Energy Consultants(TEC Co.)TehranIran School of Geology College of ScienceUniversity of TehranTehranIran Department of Geology Tarbiat Modares UniversityTehranIran

The Qom Formation is the most important hydrocarbon reservoir target in Central *** Qom platform developed in a back-arc basin during the Oligo-Miocene due to the closing of the Tethyan *** formation consists of a variety of carbonate and non-carbonate facies deposited on a platform ranging from supratidal to basin.A combination of tectonic and eustatic events led to some lateral and vertical facies variations in the study *** third-order depositional sequences and related surfaces were identified regarding vertical facies changes in the studied sections of this Oligo-Miocene *** to all results and data,this succession was initially deposited during the Chattian upon a distally steepened ramp of siliciclastic-carbonate composition,including the Bouma ***,from the late Chattian to the Aquitanian,the platform changed into a homoclinal carbonate ramp with a gentle *** respect to tectonic activity,this phase was a calm period during the deposition of the Qom ***,a drowned carbonate platform and a rimmed shelf emerged during the Burdigalian,terminated by the continental deposits of the Upper Red *** all geological characteristics,three main tectono-eustatic evolutionary phases have been recognized in the Qom back-arcbasin.

关键词： carbonate ramp depositional facies submarine fan eustasy basement faults back-arc basin