检索结果-南通市图书馆

Journal of Iron and Steel Research International 2019年第10期26卷 1096-1105页

作者： mao-guo xiao Xin-yang Lü Dong-hui Li Shao-hong Li Kun-yu Zhao mao-sheng Yang School of Material Science and Engineering Kunming University of Science and TechnologyKunming 650093YunnanChina Institute for Special Steels Central Iron and Steel Research InstituteBeijing 100081China

The carbides precipitation and their evolution at elevated tempering temperature in Crl5Col0Mo5-alloyed heat-resistant bearing steel were investigated by means of the transmission electron *** results show that there is no carbide precipitated from the martensitic matrix when the sample was tempered at 480℃.However,when the sample was tempered at 540℃,a large number of stable spherical M6C carbides precipitated in the test ***,there are three types of carbides precipitated from the matrix including M6C,M2C and M23C6 carbides when the tempering temperature reached 600℃.The mechanical properties also present a correlation with the evolution of carbides during tempering at different *** indicates that the strengthening mechanism of the steel is mainly attributed to the precipitation of carbides and their evolution,including the morphologies and types of carbides at different *** addition,the austenitic layers with a thickness of about 30 nm have been obtained between the martensite laths after tempering at 600℃.The austenitic layers will produce transformation-induced plasticity effects to improve the toughness of the steel.

关键词： High-temperature bearing steel Carbide evolution Phase diagram Diffusion coefficient Secondary hardening Austenitic layer

Effects of traditional heat treatment and a novel deep cryogenic treatment on microstructure and mechanical properties of low-carbon high-alloy martensitic bearing steel

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2021年第3期28卷 370-382页

作者： Dong-hui Li Wen-chao He Xu Zhang mao-guo xiao Shao-hong Li Kun-yu Zhao mao-sheng Yang School of Materials Science and Engineering Kunming University of Science and TechnologyKunming650093YunnanChina Institute for Special Steels Central Iron and Steel Research InstituteBeijing100081China

The effects of traditional heat treatment(quenching and then tempering)and deep cryogenic treatment on the microstructure and mechanical properties of a low-carbon high-alloy martensitic bearing steel were studied by Rockwell hardness test,X-ray diffractometry,scanning electron microscopy and transmission electron *** results show that the deep cryogenic treatment promotes the transformation of the retained austenite to martensite during cooling,which leads to the hardness of the sample after deep cryogenic treatment higher than that at the quenched ***,the carbon content in the martensite matrix after different treatments was calculated and the results indicated that deep cryogenic treatment can promote the segregation of carbon atoms in martensite to *** segregated carbon atoms act as and grow into nuclei for the formation of fine carbide particles during subsequent *** this resulted in the fact that the hardness of the tempered experimental steel after deep cryogenic treatment is higher than that without deep cryogenic treatment.

关键词： Heat treatment High-alloy martensitic bearing steel Deep cryogenic treatment Carbide Retained austenite

Experimental study of dual nano-network, high-temperature resistant aerogel material as an integration of thermal management functions

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 157-170页

作者： Yueyue xiao Tianke mao Zun Zhao Yuelei Pan Heping Zhang Xudong Cheng State Key Laboratory of Fire Science University of Science and Technology of China

Thermal management system is highly desirable to guarantee the performance and thermal safety of lithium-ion batteries,but it reduces the energy density of battery modules and even is unable to provide highly effective ***,a thermal management function integrated material is presented based on high-temperature resistant aerogel and phase change material and is applied at both charge–discharge process and thermal runaway *** this sandwich structure Paraffin@SiC nanowire/Aerogel sheet （denoted as PA@SAS） system,SiC nanowires endow the middle aerogel sheet （SAS） a dual nano-network *** enhanced mechanical properties of SAS were studied by compressive tests and dynamic mechanical ***,the thermal conductivity of SAS at 600°C is only 0.042 W/（m K）.The surface phase change material layers facilitate temperature uniformity of batteries （surface temperature difference less than 1.82°C） through latent ***,a large-format battery module with four 58 Ah LiNi0.5Co0.2Mn0.3O2LIBs was ***@SAS successfully prevents thermal runaway propagation,yielding a temperature gap of 602°C through the 2 mm-thick cross ***@SAS also exhibits excellent performance in other safety issues such as temperature rise rate,flame heat flux,*** lightweight property and effective insulation performance achieves significant safety enhancement with mass and volume energy density reduction of only 0.79%and 5.4%,*** originality of the present research stems from the micro and macro structure design of the proposed thermal management material and the combination of intrinsic advantages of every *** work provides a reliable design of achieving the integration of thermal management functions into an aerogel composite and improves the thermal safety of lithium-ion batteries.

关键词： Thermal insulation

GPS: graph contrastive learning via multi-scale augmented views from adversarial pooling

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Science China(Information Sciences) 2025年第1期68卷 145-158页

作者： Wei JU Yiyang GU Zhengyang mao Ziyue QIAO Yifang QIN xiao LUO Hui XIONG Ming ZHANG School of Computer Science National Key Laboratory for Multimedia Information ProcessingPeking University Artificial Intelligence Thrust The Hong Kong University of Science and Technology Department of Computer Science University of California

Self-supervised graph representation learning has recently shown considerable promise in a range of fields, including bioinformatics and social networks. A large number of graph contrastive learning approaches have shown promising performance for representation learning on graphs, which train models by maximizing agreement between original graphs and their augmented views(i.e., positive views). Unfortunately, these methods usually involve pre-defined augmentation strategies based on the knowledge of human experts. Moreover, these strategies may fail to generate challenging positive views to provide sufficient supervision signals. In this paper, we present a novel approach named graph pooling contrast(GPS) to address these *** by the fact that graph pooling can adaptively coarsen the graph with the removal of redundancy, we rethink graph pooling and leverage it to automatically generate multi-scale positive views with varying emphasis on providing challenging positives and preserving semantics, i.e., strongly-augmented view and weakly-augmented view. Then, we incorporate both views into a joint contrastive learning framework with similarity learning and consistency learning, where our pooling module is adversarially trained with respect to the encoder for adversarial robustness. Experiments on twelve datasets on both graph classification and transfer learning tasks verify the superiority of the proposed method over its counterparts.

关键词： graph representation learning graph neural networks graph contrastive learning graph augmentations graph pooling

Morphological Mechanism and Experimental Verification of Self-healing of Basalt-fiber Modified Water-soaked Asphalt

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Wuhan University of Technology(Materials Science) 2025年第1期40卷 171-186页

作者： xiao Minmin DONG Jinyong LI Chunyan guo Xu REN Jianguo School of Urban Construction and Safety Engineering Shanghai Institute of TechnologyShanghai 201418China

This study investigates the mechanism of action of representative molecules of basalt fibers on the healing of water-soaked *** parameters,morphological characteristics,interfacial healing energy,and interfacial healing strength were analyzed using molecular dynamics and macroscopic tests under different time,temperature,and water conditions to evaluate the specific states and critical conditions involved in *** results indicate that basalt-fiber molecules can induce rearrangement and a combination of water-soaked asphalt at the healing *** groups with different bonding states increase the interfacial adsorption capacity of water-soaked *** interaction between basalt fiber molecules and water molecules leads to a"hoop"phenomenon,while aromatics-2 molecules exhibit a"ring band aggregation"*** former reduces the miscibility of water and asphalt molecules,while the latter causes slow diffusion of the ***,a micro-macro dual-scale comparison of interfacial healing strength was conducted at temperatures of 297.15 and 312.15 K to identify the strength transition point and critical temperature of 299.4 K during the self-healing process of basalt-fiber modified water-soaked asphalt.

关键词： water-soaked asphalt basalt-fibers self-healing properties moisture status molecular characterization

维普期刊数据库

Separation of the ionospheric and thermospheric contributions in the data from the Triple Ionosophere Photo Meter onboard the Feng-Yun 3E satellite

在线全文

学校读者我要写书评

暂无评论

Science China Earth Sciences 2025年第1期68卷 172-184页

作者： Fang JIANG Tian mao Jin-Song WANG Xiu-Qing HU xiao-Xin ZHANG Liping FU Nan JIA Tianfang WANG National Space Science Center Chinese Academy of Sciences Beijing Key Laboratory of Space Environment Exploration Key Laboratory of Environmental Space Situation Awareness Technology National Satellite Meteorological Center China Meteorological Administration

The Triple Ionosphere Photo Meter （TRIPM） is a far ultraviolet nadir-view photometer that is onboard the secondgeneration,polar-orbiting Chinese meteorological satellite Feng-Yun 3E （FY-3E）,which was launched on July 5,*** has three channels,and each is used to measure different types of emissions:（1） 135.6 nm airglow produced by the recombination of the O+ions and electrons in the absence of sunlight （nighttime channel）;（2） 135.6 nm airglow from the OI when sunlight is present （daytime/dusk-dawn 135.6 nm channel）;and （3） Airglow in the N2LBH of the TRIPM （daytime/dusk-dawn N2LBH channel）.FY-3E is a satellite operating in the early morning ***,the data are mostly distributed on the dawndusk side or at times when the solar zenith angle is relatively *** this study,combined with simulation calculations,the data are *** further explore the application value of the data products,a model is used to separate the ionospheric radiative recombination contribution from the thermosphere photoelectron impact excitation contribution in the data from the daytime/dusk-dawn 135.6 nm *** approach not only improves the accuracy of O/N2derived from the 135.6 nm channel and N2LBH channel but also provides the ionospheric 135.6 nm radiance at the same time as the *** results show that the 135.6 nm radiance originating from the combination of O+and electrons extracted from the measurement data exhibits similar equatorial anomaly peak structure characteristics and seasonal variations as the corresponding GPS total electron content （TEC） *** the other hand,the separated 135.6 nm radiance generated from the thermosphere photoelectron collision excitation does not contain radiative recombination contributions;thus,the ionosphere influence is greatly avoided when the O/N2is obtained.

关键词： Far ultraviolet 135.6 nm emission intensity Photoelectron impact excitation Radiative recombination excitation

同方期刊数据库

Effects of the extrusion parameters on microstructure,texture and room temperature mechanical properties of extruded Mg-2.49Nd-1.82Gd-0.2Zn-0.2Zr alloy

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2025年第1期32卷 136-146页

作者： Chenjin Zhang Guangyu Yang Lei xiao Zhiyong Kan Jing guo Qiang Li Wanqi Jie State Key Laboratory of Solidification Processing Northwestern Polytechnical UniversityXi’an 710072China College of Materials Science and Engineering Fuzhou UniversityFuzhou 350108China College of Chemistry and Environmental Science Qujing Normal UniversityQujing 655011China

Microstructure,texture,and mechanical properties of the extruded Mg-2.49Nd-1.82Gd-0.2Zn-0.2Zr alloy were investigated at different extrusion temperatures(260 and 320℃),extrusion ratios(10:1,15:1,and 30:1),and extrusion speeds(3 and 6 mm/s).The experimental results exhibited that the grain sizes after extrusion were much finer than that of the homogenized alloy,and the second phase showed streamline distribution along the extrusion direction(ED).With extrusion temperature increased from 260 to 320℃,the microstructure,texture,and mechanical properties of alloys changed *** dynamic recrystallization(DRX)degree and grain sizes enhanced as the extrusion ratio increased from 10:1 to 30:1,and the strength gradually decreased but elongation(EL)*** the extrusion speed increased from 3 to 6 mm/s,the grain sizes and DRX degree increased significantly,and the samples presented the typical-rare-earth(RE)*** alloy extruded at 260℃ with extrusion ratio of 10:1 and extrusion speed of 3 mm/s showed the tensile yield strength(TYS)of 213 MPa and EL of 30.6%.After quantitatively analyzing the contribution of strengthening mechanisms,it was found that the grain boundary strengthening and dislocation strengthening played major roles among strengthening *** results provide some guidelines for enlarging the industrial application of extruded Mg-RE alloy.

关键词： Mg-rare earth alloys extrusion temperature extrusion ratio extrusion speed strengthening mechanisms

维普期刊数据库

Combination of fruquintinib with venetoclax for the treatment of colorectal cancer

在线全文

学校读者我要写书评

暂无评论

Oncology Research 2025年第1期33卷 225-234页

作者： WEI ZHANG WEICHENG WANG RUI WANG xiao HAN LIJUN ZHU WENJIE guo YANHONG GU Department of Oncology The First Affiliated Hospital of Nanjing Medical UniversityNanjing210029China State Key Laboratory of Pharmaceutical Biotechnology School of Life SciencesNanjing UniversityNanjing210023China Department of Oncology The Affiliated Taizhou People’s Hospital of Nanjing Medical UniversityTaizhou225300China

Background:As a novel blocker of vascular endothelial growth factor receptor(VEGFR),fruquintinib has been approved for treating colorectal cancer(CRC).However,its dosage and therapeutic efficacy are limited by its widespread adverse ***,recognized as the initial inhibitor of B-cell lymphoma protein 2(BCL2),has shown potential in boosting the effectiveness of immunotherapy against *** study investigated the efficacy and mechanisms of fruquintinib combined with venetoclax in treating *** and Materials:We developed a colon cancer mouse model with the CT26 colon cell line to demonstrate fruquintinib and venetoclax’s efficacy against *** we employed various techniques to evaluate different aspects of the experimental *** was used to detect cell proliferation and angiogenesis in tumor *** blot analysis was utilized to examine the occurrence of cell apoptosis,and flow cytometry to quantitate immune cells within the tumor ***,immunofluorescence was employed to measure cytokine ***:The strongest inhibition on tumor growth was achieved by the combination of fruquintinib with venetoclax,as opposed to individual drug *** was found to amplify the impact of fruquintinib,leading to decreased cancer cell proliferation,increased cancer cell apoptosis,lowered angiogenesis,better vascular structure normalization,and improved immune cell ***:Our findings indicate that the addition of venetoclax enhances the impact of fruquintinib on vascular normalization and modulation of the tumor immune *** study presents the justification for utilizing the fruquintinib and venetoclax combination in treating *** holds promise in being assimilated into anticancer medications for CRC.

关键词： Colorectal cancer(CRC) B-cell lymphoma protein 2(BCL2) Venetoclax Vascular endothelial growth factor receptor(VEGFR) Fruquintinib Anti-angiogenesis Immunotherapy

Deciphering fungal metabolon coupling tandem inverse-electrondemand Diels-Alder reaction and semipinacol rearrangement for the biosynthesis of spiro polycyclic alkaloids

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China Chemistry 2025年第1期68卷 288-296页

作者： Shuai Liu Wen-Qiang Xu Ying-Tong Di Man-Cheng Tang Ding-Kang Chen Ming-Ming Cao Yao-Wen Chang Hong-Yu Tang Chun-mao Yuan Jun-Bo Yang Zhi-Li Zuo Han guo Zi-Fei Xu Ying Zeng Yun-Dong Wu xiao-Jiang Hao Key Laboratory of Phytochemistry and Natural Medicines (Chinese Academy of Sciences) Kunming Institute of Botany Chinese Academy of Sciences University of Chinese Academy of Sciences Lab of Computational Chemistry and Drug Design State Key Laboratory of Chemical Oncogenomics Peking University Shenzhen Graduate School Shenzhen Bay Laboratory State Key Laboratory of Microbial Metabolism School of Life Sciences & Biotechnology Shanghai Jiao Tong University State Key Laboratory of Functions and Applications of Medicinal Plants Guizhou Medical University Molecular Biology Experimental Center Germplasm Bank of Wild Species in Southwest China Kunming Institute of Botany Chinese Academy of Sciences Yunnan Key Laboratory for Wild Plant Resources Kunming Institute of Botany Chinese Academy of Sciences Research Unit of Chemical Biology of Natural Anti-Virus Products Chinese Academy of Medical Sciences

In the intricate process of natural product biosynthesis, a metabolon can enhance metabolic flux by associating sequential enzymes. A fungal metabolon, comprising of flavin-dependent monooxygenase Spe F and P450 monooxygenase Spe G, is identified in the biosynthesis of spiro polycyclic alkaloids(+)-notoamide B and its diastereomer(+)-versicolamide B. Using notoamide E as a substance, Spe F/Spe G metabolon can control the stereoselectivity of its 2,3-epoxidation, followed by hydrogen atom ion at C-17 to generate reactive epoxide tau-m A with dienyl iminium unit. Subsequently,(+)-notoamide B and(+)-versicolamide B are produced via tandem nonenzymatic inverse-electron-demand Diels-Alder reaction and semipinacol rearrangement. This provides the first example of metabolon in the biosynthesis of spiro-prenylated indole alkaloids.

关键词： metabolon Diels-Alder reaction semipinacol rearrangement biosynthesis notoamides spiro polycyclic alkaloids

Advances in Graphene‑Based Electrode for Triboelectric Nanogenerator

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro Letters 2025年第1期17卷 378-403页

作者： Bin Xie Yuanhui guo Yun Chen Hao Zhang Jiawei xiao maoxiang Hou Huilong Liu Li Ma Xin Chen Chingping Wong State Key Laboratory of Precision Electronic Manufacturing Technology and Equipment Guangdong University of TechnologyGuangzhou 510006People’s Republic of China School of Electromechanical Engineering Guangdong University of TechnologyGuangzhou 510006People’s Republic of China School of Materials Science and Engineering Georgia Institute of TechnologyAtlantaGA 30332USA

With the continuous development of wearable electronics,wireless sensor networks and other micro-electronic devices,there is an increasingly urgent need for miniature,flexible and efficient nanopower generation *** nanogenerator(TENG)technology can convert small mechanical energy into electricity,which is expected to address this *** the core component of TENG,the choice of electrode materials significantly affects its *** metal electrode materials often suffer from problems such as durability,which limits the further application of ***,as a novel electrode material,shows excellent prospects for application in TENG owing to its unique structure and excellent electrical *** review systematically summarizes the recent research progress and application prospects of TENGs based on graphene *** precision processing methods of graphene electrodes are introduced,and the applications of graphene electrode-based TENGs in various scenarios as well as the enhancement of graphene electrodes for TENG performance are *** addition,the future development of graphene electrode-based TENGs is also prospectively discussed,aiming to promote the continuous advancement of graphene electrode-based TENGs.

关键词： Triboelectric nanogenerator Precision processing Graphene electrode Self-powered sensor

维普期刊数据库