检索结果-南通市图书馆

Modelling and Optimal Design of Hybrid Power System Photovoltaic/Solid Oxide Fuel Cell for a Mediterranean City

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Energy Engineering 2021年第6期118卷 1767-1781页

作者： Bachir Melzi Nesrine Kefif mamdouh el haj as.ad Haleh Delnava Abdulkadir Hamid School of Materials Sciences and Engineering Wuhan University of TechnologyWuhanChina Power and Control Department Electronic and Electrical Engineering InstituteM’hamed Bougara UniversityBoumerdesAlgeria Sustainable and Renewable Energy Engineering Department University of SharjahSharjahUnited Arab Emirates Institute of Manufacturing Information and Systems National Cheng Kung UniversityTainanTaiwan electrical Engineering Department University of SharjahSharjahUnited Arab Emirates

This work presents a hybrid power system consisting of photovoltaic and solid oxide fuel cell(PV-SOFC)for electricity production and hydrogen *** simulation of this hybrid system is adjusted for Bou-Zedjar city in north *** software was used for this simulation to calculate the power output and the total net present *** method used depends on the annual average monthly values of clearness index and radiation for which the energy contributions are determined for each component of PV/SOFC hybrid *** economic study is more important criterion in the proposed hybrid system,and the results show that the cost is very suitable for the use of this hybrid system,which ensures that the area is fed continuously with the sufficient energy for the load which assumed to be 500 kW in the peak *** optimized results of the present study show that the photovoltaic is capable of generating 8733 kW electricity while the SOFC produces 500 kW *** electrolyzer is capable of producing 238750 kg of hydrogen which is used as fuel in the SOFC to compensate the energy lack in nights and during peak season.

关键词： Energy storage PV/SOFC hybrid systems hydrogen production energy and economic optimization

Modeling CO_(2) Emission of Middle Eastern Countries Using Intelligent Methods

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Computers, Materials & Continua 2021年第12期69卷 3767-3781页

作者： mamdouh el haj as.ad Ibrahim Mahariq Zaher Al Barakeh Mahmoud Khasawneh Mohammad Ali Amooie Sustainable and Renewable Energy Engineering Department University of SharjahPO Box 27272SharjahUAE College of Engineering and Technology American University of the Middle EastKuwait Department of Mechanical and Industrial Engineering Louisiana State UniversityUSA

CO_(2) emission is considerably dependent on energy consumption and on share of energy sources as well as on the extent of economic ***,these factors must be considered for CO_(2) emission prediction for seven middle eastern countries including Iran,Kuwait,United Arab Emirates,Turkey,Saudi Arabia,Iraq and *** order to propose a predictive model,a Multilayer Perceptron Artificial Neural Network(MLP ANN)is *** transfer functions including logsig,tansig and radial basis functions are utilized in the hidden layer of the ***,various numbers of neurons are applied in the structure of the *** is revealed that using MLP ANN makes it possible to accurately predict CO_(2) emission of these *** addition,it is concluded that using logsig transfer function leads to the highest accuracy with minimum value of mean squared error(MSE)which is followed by the networks with radial basis and tansig transfer *** R-squared of the networks with logsig,radial basis and tansig transfer functions are 0.9998,0.9997 and 0.9996,***,comparison of the proposed model with a similar study,considered five countries in the same region,reveals higher accuracy in term of MSE.

关键词： CO_(2)emission artificial neural network middle eastern countries transfer function

Thermodynamic Performance Analysis of Geothermal Power Plant Based on Organic Rankine Cycle (ORC) Using Mixture of Pure Working Fluids

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Energy Engineering 2024年第8期121卷 2023-2038页

作者： Abdul Sattar Laghari Mohammad Waqas Chandio Laveet Kumar mamdouh el haj as.ad Department of Mechanical Engineering Mehran University of Engineering and TechnologyJamshoro76062Pakistan Department of Mechanical and Industrial Engineering College of EngineeringQatar UniversityDoha00000Qatar Sustainable&Renewable Energy Engineering Department University of SharjahSharjah00000United Arab Emirates

The selection of working fluid significantly impacts the geothermal ORC’s *** a mixture as a working fluid is a strategy to improve the output of geothermal *** the current study,modelling and thermodynamic analysis of ORC,using geothermal as a heat source,is carried out at fixed operating *** model is simulated in the Engineering Equation Solver(EES).An environment-friendly mixture of fluids,i.e.,R245fa/R600a,with a suitable mole fraction,is used as the operating *** mixture provided the most convenient results compared to the pure working fluid under fixed operating *** impact of varying the evaporator pressure on the performance parameters,including energy efficiency,exergy efficiency and net power output is *** system provided the optimal performance once the evaporator pressure reached the maximum *** efficiencies:Energy and Exergy,and Net Power output of the system are 16.62%,64.08%and 2199 kW for the basic cycle and 20.72%,67.76%and 2326 kW respectively for the regenerative cycle.

关键词： Organic rankine cycle internal heat exchanger moderate-temperature geothermal source mixture of the fluid exergy

Energy and Cost Analysis of Processing Flat Plate Solar Collectors

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Energy Engineering 2021年第3期118卷 447-458页

作者： mamdouh el haj as.ad Ali Khosravi Mohammad AlShabi Bassam Khuwaileh Abdul-Kadir Hamid Sustainable and Renewable Energy Engineering Department University of SharjahSharjahUnited Arab Emirates Mechanical Engineering Department Aalto UniversityEspooFinland Mechanical and Nuclear Energy Engineering Department University of SharjahSharjahUnited Arab Emirates electrical Engineering Department University of SharjahSharjahUnited Arab Emirates

In this work,a life cycle analysis is accomplished for flat plate solar *** purpose of this investigation is to predict the energy consumption during the manufacturing processes that results in carbon dioxide *** consumption and system efficiency enhancement will be studied and *** EduPack software is used to perform the analysis of the currently commercial system,and the suggested changes are implemented to increase the efficiency and make the *** though cost analysis is done,the priority of selection is given to the most energy conserving and environmentally friendly ***,if the compared alternatives result in the same energy consumption and CO_(2)emissions,the cost analysis would be a better *** can be stated that flat plate solar collectors are sustainable and renewable energy systems that do not produce CO_(2)emissions during their active usage,but the manufacturing processes they undergo during the design contribute to the greenhouse gasses emission.

关键词： Life cycle solar collector renewable energy solar thermal CO_(2)emission economic analysis

Parametric Energy and Economic Analysis ofModified Combined Cycle Power Plant with Vapor Absorption and Organic Rankine Cycle

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Energy Engineering 2024年第11期121卷 3095-3120页

作者： Abdul Moiz Malik Shahzaib Abdul Ghafoor Memon Laveet Kumar mamdouh el haj as.ad Department of Mechanical Engineering Mehran University of Engineering and TechnologyJamshoro76060Pakistan Department of Mechanical Engineering College of EngineeringQatar UniversityDohaP.O.Box 2713Qatar Department of Sustainable and Renewable Energy Engineering University of SharjahSharjah27272United Arab Emirates

To meet the escalating electricity demand and rising fuel costs,along with notable losses in power transmission,exploring alternative solutions is *** turbines demonstrate high efficiency under ideal International Organization for Standardization(ISO)conditions but face challenges during summer when ambient temperatures reach 40℃.To enhance performance,the proposal suggests cooling inlet air by 15℃using a vapor absorption chiller(VAC),utilizing residual exhaust gases from a combined cycle power plant(CCPP)to maximize power ***,diverting a portion of exhaust gases to drive an organic Rankine cycle(ORC)for supplementary power generation offers added *** integrated approach not only boosts power output but alsominimizes environmental impact by repurposing exhaust gases for additional *** study presents a detailed energy and economic analysis of a modified combine cycle power plant,in Kotri,Pakistan.R600A is used as organic fuel for the ORC while LiBr-H2O solution is used for the *** performance parameters,efficiency and energy utilization factor,Four energetic parameters,Work output of ORC,modified CCPP,original CCPP and cooling rate,and one economics parameter,payback period were examined under varying ambient conditions and mass fraction of exhaust gases from outlet of a gas turbine(ψ).A parametric investigation was conducted within the temperature range of 18℃to 50℃,relative humidity between 70%and 90%,and theψranging from 0 to *** findings reveal that under elevated ambient conditions(40℃,90%humidity)withψat 0,the Energy Utilization Factor(EUF)exceeds 60%.However,the ORC exhibits a low work output of 100KWalongside a high cooling load of 29,000 ***,the modified system demonstrates an augmented work output of approximately 81,850 KWcompared to the original system’s 78,***,the integration of this systemproves advantageous across all ***,the payback period of the system

关键词： Combined cycle power plant vapor absorption chiller organic Rankine cycle

Optimization of synchronized frequency and voltage control for a distributed generation system using the Black Widow Optimization algorithm

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Clean Energy 2022年第1期6卷 105-118页

作者： Baran Sadeghi Nima Shafaghatian Reza Alayi mamdouh el haj as.ad Farhad Zishan Hasan Hosseinzadeh electrical Engineering Department Ghazvin BranchIslamic Azad UniversityGhazvinIran electrical Engineering Department Zanjan UniversityZanjanIran Department of Mechanics Germi BranchIslamic Azad UniversityGermiIran Sustainable and Renewable Energy Engineering Department University of SharjahP O Box 27272SharjahUAE Department of electrical Engineering Sahand University of TechnologyTabrizIran Department of Mathematics Ardabil BranchIslamic Azad UniversityArdabilIran

A distributed generation network could be a hybrid power system that includes wind-diesel power generation based on induction generators(IGs)and synchronous generators(SGs).The main advantage of these systems is the possibility of using renewable energy in their *** most important challenge is to design the voltage-control loop with the frequency-control loop to obtain optimal responses for voltage and frequency *** this work,the voltage-control loop is designed by an automatic voltage regulator.A linear model of the hybrid system has also been developed with coordinated voltage and frequency *** frequency response and voltage deviations are compared for different load disturbances and different reactive *** gains of the SG and the static volt-ampere reactive compensator(SVC)controllers in the IG terminal are calculated using the Black Widow Optimization(BWO)algorithm to insure low frequency and voltage *** BWO optimization algorithm is one of the newest and most powerful optimization methods to have been introduced so *** results showed that the BWO algorithm has a good speed in solving the proposed objective function.A 22%improvement in time adjustment was observed in the use of an optimal ***,an 18%improvement was observed in the transitory values.

关键词： microgrid voltage and frequency control Black Widow Optimization algorithm dynamic response smart grid

Measuring Impact of Lean Manufacturing Tools for Continuous Improvement on Economic Sustainability

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Systems Science and Systems Engineering 2024年第4期33卷 452-474页

作者： Luis Javier Márquez Figueroa Jorge Luis García-Alcaraz Ahmed I.Osman Alfonso Jesús Gil López Yashar Aryanfar Mika Sillanpää mamdouh el haj as.ad Department of electrical Engineering and Computer Science Universidad Autónoma de Ciudad JuárezCiudad JuárezChihuahuaMéxico Department of Industrial Engineering and Manufacturing Universidad Autónoma de Ciudad JuárezCiudad JuárezChihuahuaMéxico School of Chemistry and Chemical Engineering Queens UniversityBelfastNorthern IrelandUK Department of Economic and Managerial Sciences University of La RiojaLa RiojaSpain Department of Chemical Engineering University of JohannesburgJohannesburgSouth Africa Department of Sustainable and Renewable Energy Engineering University of SharjahSharjahUAE

Using Lean Manufacturing(LM)tools in production processes is crucial for companies’economic,environmental,and social sustainability *** study shows a structural equation model(SEM)that shows the relationship between LM Tools like Kaizen(KAI),Gemba(GEM),Value Stream Mapping(VSM)and Key Performance Indicator(KPI)with Economic Sustainability(ECS).Seven hypotheses were evaluated with data from 179 responses to a questionnaire about the Mexican maquiladora industry,showing that these variables are *** a 95%confidence level,the model was evaluated using the partial least squares *** findings indicate that the relationships between KAI and GEM and KAI and VSM have the strongest relationship,followed by VSM and ECS;however,VSM has the strongest effect on *** on these findings,it is recommended that managers adopt a continuous improvement(KAI)approach based on working directly on the shop floor(GEM and VSM)to support their decisions regarding economic growth(ECS).

关键词： Lean manufacturing economic sustainability structural equation model quality improvement

Parameters Affecting Energy Consumption for Producing High Carbon Ferromanganese in a Closed Submerged Arc Furnace

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2014年第7期21卷 666-672页

作者： Azza Ahmed Hossam Halfa Mohamed K.el-Fawakhry Hoda el-Faramawy mamdouh Eissa Steel Technology Metallurgical Research and Development Institute

The power consumption is considered to be the most important factor affecting the production cost of fer romanganese alloy. Different parameters affecting the energy consumption for industrial production of high carbon ferromanganese HCFeMn were investigated in a closed submerged arc furnace. The analysis of industrial data revealed that the most energy consumed factors were the direct reduction by solid carbon, Boudouard reaction, metal and slag formation, and decomposition of fluxing materials （limestone and dolomite）. To reduce the energy con- sumption and minimize the energy losses in the production process of HCFeMn, it was recommended to use Mn blend with minimum Mn to Fe ratio of 6 and lower SiO2 content or higher basicity. The added coke must be adjusted according to the material balance to prevent the over-coke and to minimize the highly endothermic ＂Boudouard reac tion＂. In addition, it was recommended to work at basic slags with the ratio of （CaO＋MgO） to Si（）2 equal to 1.0- 1.2 instead of much higher slag basicity. Furthermore, the mass losses had to be minimized through adjusting the handling and charging process and to take care of all metal produced.

关键词： high carbon ferromanganese production energy consumption carbonate decomposition Boudouard reaction slag basicity energy loss

Effect of cooling rate and composition on microstructure and mechanical properties of ultrahigh-strength steels

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2019年第12期26卷 1350-1365页

作者： Mohammed Ali David Porter Jukka Komi mamdouh Eissa Hoda el Faramawy Taha Mattar Materials and Mechanical Engineering Centre for Advanced Steels ResearchUniversity of OuluOulu 90014Finland Steel Technology Department Central Metallurgical Research and Development InstituteHelwanCairo 11421Egypt

The influence of cooling rate on the microstructure and mechanical properties of two new ultrahigh-strength steels(UHSSs)with different levels of C,Cr and Ni has been evaluated for the as-cooled and untempered *** UHSS had higher contents of C and Cr,while the other one had a higher Ni *** the basis of dilatation curves,microstructures,macrohardness and microhardness,continuous cooling transformation diagrams were constructed as a guide to heat treatment *** rates(CRs)of 60,1 and 0.01°C/s were selected for more detailed *** characterization was made by laser scanning confocal microscopy,field emission scanning electron microscopy combined with electron backscatter diffraction,electron probe microanalysis and X-ray *** properties were characterized using macrohardness,tensile and Charpy V-notch impact *** with the higher C and Cr contents showed lower transformation temperatures and slower bainite formation kinetics than that with the higher Ni *** cooling rates led to lower volume fractions and carbon contents of retained austenite together with finer prior austenite grain size,as well as effective final grain size and lath *** changes were accompanied by higher yield and tensile *** best combinations of strength and toughness were obtained with martensitic microstructures and by avoiding the formation of granular bainite accompanied by proeutectoid carbides at low *** the cooling rates studied,UHSS with the higher C and Cr contents showed the higher hardness and strength but at the cost of toughness.

关键词： Ultrahigh-strength steel electroslag remelting Continuous cooling transformation diagram Microstructure feature Mechanical property