检索结果-南通市图书馆

Trap and 1/f-noise effects at the surface and core of GaN nanowire gateall-around FET structure

Nano Research 2019年第4期12卷 809-814页

作者： mal.em siva pratap reddy Ki-Sik Im Jung-Hee Lee Raphael Caulmione Sorin Cristoloveanu School of Electronics Engineering Kyungpook National University Daegu 41566 Republic of Korea Advanced Material Research Center Kumoh National Institute of Technology Gumi 39177 Republic of Korea SOITEC Bernin 38190 France Institute of Microelectronics Electromagnetism and Photonics Grenoble Polytechnic Institute Minatec Grenoble 38016 France

Using capacitance,conductance and noise measurements,we investigate the trapping behavior at the surface and in the core of triangular-shaped one-dimensional (1 D) array of GaN nanowire gate-all-around field effect transistor (GAA FET),fabricated via a top-down *** surface traps in such a low dimensional device play a crucial role in determining the device *** estimated surface trap density rapidly decreases with increasing frequency,ranging from 6.07 × 1012 cm-2·eV-1 at 1 kHz to 1.90 × 1011 cm-2·eV-1 at 1 MHz,*** noise results reveal that the power spectral density increases with gate voltage and clearly exhibits 1/f-noise signature in the accumulation region (Vgs > Vth =3.4 V) for all *** the surface depletion region (1.5 V < Vgs < Vth),the device is governed by 1/fat lower frequencies and 1/f2 noise at frequencies higher than ~ 5 *** 1/f2 noise characteristics is attributed to additional generation-recombination (G-R),mostly caused by the electron trapping/detrapping process through deep traps located in the surface depletion region of the *** cutoff frequency for the 1/f2 noise characteristics further shifts to lower frequency of 102-103 Hz when the device operates in deep-subthreshold region (Vgs < 1.5 V).In this regime,the electron trapping/detrapping process through deep traps expands into the totally depleted nanowire core and the G-R noise prevails in the entire nanowire channel.

关键词： gate-all-around field effect transistor (FET) nanowire GaN trap 1/f-noise

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Effect of Diffuser Vane Shape on the Performance of a Centrifugal Compressor Stage

引用

Journal of Thermal Science 2014年第2期23卷 127-132页

作者： T Ch siva reddy GV Ramana Murty MVSSSM Prasad Sreenidhi Institute of Science and Technology GhatkesarHyderabadA.P.India Vasavi College of Engineering Hhyderabad

The present paper reports the results of experimental investigations on the effect of diffuser vane shape on the performance of a centrifugal compressor stage. These studies were conducted on the chosen stage having a back- ward curved impeller of 500 turn tip diameter and 24.5 mm width and its design flow coefficient is Фd=0.0535. Three different low solidity diffuser vane shapes namely uncarnbered aerofoil, constant thickness flat plate and circular arc cambered constant thickness plate were chosen as the variants for diffuser vane shape and all the three shapes have the same thickness to chord ratio （t/c=0.1）. Flow coefficient, polytropic efficiency, total head coeffi- cient, power coefficient and static pressure recovery coefficient were chosen as the parameters for evaluating the effect of diffuser vane shape on the stage performance. The results show that there is reasonable improvement in stage efficiency and total head coefficient with the use of the chosen diffuser vane shapes as compared to conven- tional vaneless diffuser. It is also noticed that the aero foil shaped LSD has shown better performance when com- pared to flat plate and circular arc profiles. The aerofoil vane shape of the diffuser blade is seen to be tolerant over a considerable range of incidence.

关键词： Centrifugal compressor Vaneless diffuser Low solidity diffuser

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Heat dissipation in graphene foams

引用

Nano Research 2021年第3期14卷 829-833页

作者： Yaniv Cohen siva K.reddy Assaf Ya’akobovitz Department of Mechanical Engineering Faculty of Engineering SciencesBen-Gurion University of the NegevBeer-Sheva8410501Israel

Graphene foam(GF)—a three-dimensional network of hollow graphene branches—is a highly attractive material for diverse ***,to date,the heat dissipation characteristics of GFs have not been *** fill this gap,we synthesized GF devices,subjected them to high temperatures,and investigated their thermal behavior by using infrared *** find that while the convective area of GF devices is comparable to that of bulk materials(such as metals),the coefficient of convection of these devices is several orders of magnitude higher than that of *** addition,the GF devices showed a reproducible thermal behavior,which we attribute to negligible temperature-induced morphological changes(as confirmed by Raman analysis).Taken together,our findings suggest GF as a promising candidate material for advanced cooling applications where efficient heat dissipation is needed,e.g.,in electrical circuits.

关键词： convection graphene foam heat transfer

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Ultra-flexible graphene/nylon/PDMS coaxial fiber-shaped multifunctional sensor

引用

Nano Research 2023年第4期16卷 5541-5547页

作者： Peddathimula Puneetha siva pratap reddy mal.em Sung Cheol Park Seoha Kim Dong Hun Heo Cheol Min Kim Jaesool Shim Sung Jin An Dong-Yeon Lee Kwi-Il Park Department of Robotics and Intelligent Machine Engineering/College of Mechanical and IT Engineering Yeungnam UniversityGyeongsan 38541Republic of Korea School of Materials Science and Engineering Kyungpook National UniversityDaegu 41566Republic of Korea Advanced Material Research Center Kumoh National Institute of TechnologyGumi 39177Republic of Korea School of Mechanical Engineering Yeungnam UniversityGyeongsan 38541Republic of Korea Department of Materials Science and Engineering Kumoh National Institute of TechnologyGumi 39177Republic of Korea

The development of flexible and wearable devices is mainly required for tactile sensing;as such devices can adapt to complicated nonuniform surfaces,they can be applied to the human ***,it remains necessary to simultaneously achieve small-scale,portable,and stable developments in such ***,this work aims at fabricating a novel,lightweight,ultra-flexible,and fiber-shaped coaxial structure with a diameter of 0.51 mm using polydimethylsiloxane/graphene/nylon material,based on piezoresistive and triboelectric *** piezoresistive-based robotic-hand-controlled sensor thus realized exhibits a response time of 120 ms and a fast recovery time of 55 ***,the piezoresistive-based sensors effectively feature whisker/joystick-guided behaviors and also sense the human finger *** to the triboelectric-based selfpowered nanogenerator behavior,the resulting sensor can convert mechanical motion into electrical energy,without adversely affecting human ***,this triboelectric-based human finger sensor can be operated under different bending modes at specific ***,this multifunctional sensor is cost-effective and suitable for various applications,including robotichand-controlled operations in medical surgery,whisker/joystick motions in lightweight drone technology,and navigation with highsensitivity components.

关键词： extremely lightweight ultra-flexible piezoresistive/triboelectric sensor human-machine whisker

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Finite element analysis on transient magnetohydrodynamic(MHD)free convective chemically reacting micropolar fluid flow past a vertical porous plate with Hall current and viscous dissipation

引用

Propulsion and Power Research 2018年第4期7卷 353-365页

作者： siva reddy Sheri M.D.Shamshuddin Department of Mathematics.G1TAM University Hyderabad CampusTelangana 502329India Department of Mathematics.Vaagdevi College of Engineering WarangalTelangana 506005India

This article deals with boundary layer analysis of magnetohydrodynamics on an unsteady chemically reactive micropolar rotating fluid flow past a semi-infinite vertical plate with been developed under Boussinesq *** governing partial differential equations are transformed into a set of coupled partial differential equations using suitable dimensionless *** resultant equations are solved numerically using variational finite element method.A parametric study illustrating the influence of different pertinent parameters is performed and the numerical results for translational velocity,microrotation velocity,temperature and concentration distributions near the boundary layers are discussed and presented graphically for the parametric ***,the skin-friction,wall couple stress,surface heat transfer and mass transfer rate dependency on the emerging thermo-physical parameters are also *** finite element code is benchmarked with the results reported in the literature to check the validity and accuracy under some limiting cases and excellent agreement with published solutions is achieved.

关键词： Hall current Chemical reaction Micropolar fluid Magnetohydrodynamic(MHD) Finite elementmethod(Fem)

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Microwave synthesis and spectroscopic characterization of manganese oxalate nanocrystals

引用

Particuology 2013年第3期11卷 340-345页

作者： S.Lakshmi reddy G.Udayabashkar reddy R.Ramasubba reddy G.siva reddy Ray L.Frostc Tamio Endo Department of Physics Sri Venkateswara Degree College Department of Chemistry Sri Venkateswara University School of Chemistry Physics and Mechanical EngineeringScience and Engineering FacultyQueensland University of Technology Faculty of Engineering Mie University

The microwave synthesis of MnC204.2H2O nanoparticles was performed through the thermal double decomposition of oxalic acid dihydrate （C2H204.2H20） and Mn（OAc）2.4H2O solutions using a CATA-2R microwave reactor. Structural characterization was performed using X-ray diffraction （XRD）, particle size and shape were analyzed using transmission electron microscopy （Tem）. The chemical in the structures was investigated using electron paramagnetic resonance （EPR） as well as optical absorption spectra and near-infrared （NIR） spectroscopies. The nanocrystals produced with this method were pure and had a distorted rhombic octahedral *** oxalate

关键词： Lindbergite Electron paramagnetic resonance Optical absorption and NIR spectra Mn(ll) Water fundamentals

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Novel continuous single-step synthesis of nitrogen-modified TiO_2 by flame spray pyrolysis for photocatalytic degradation of phenol in visible light

引用

Journal of Materials Science & Technology 2018年第9期34卷 1494-1502页

作者： Thirupathi Boningari siva Nagi reddy Inturi Makram Suidan Panagiotis G.Smirniotis Chemical Engineering Program College of Engineering & Applied Science University of Cincinnati Environmental Engineering College of Engineering & Applied Science University of Cincinnati

A novel rapid and continuous process has developed for the synthesis of nitrogen-doped TiO2（N-TiO2）with flame spray pyrolysis（FSP） method. The nitrogen incorporation into TiO2 was achieved by a facile modification（addition of dilute nitric acid） in the precursor for the synthesis. The catalysts were characterized by X-ray diffraction, Raman spectroscopy, transmission electron microscopy, diffuse reflectance spectroscopy, and X-ray photoelectron spectroscopy. The doping of nitrogen into the TiO2 was confirmed by X-ray photoelectron spectroscopy（XPS） and energy dispersive X-ray（EDX） spectroscopy. The UV-vis spectra of the modified catalysts（with primary N source） exhibited band-gap narrowing for 4 N-TiO2 with band gap energy of 2.89 eV, which may be due to the presence of nitrogen in TiO2 structure. The introduction of secondary N-source（urea） into TiO2 crystal lattice results in additional reduction of the band gap energy to 2.68 eV and shows a significant improvement of visible light absorption. The N-TiO2 nanoparticles modified by using secondary N-source showed significant photocatalytic activity under visible light much higher than TiO2. The higher activity is attributed to the synergetic interaction of nitrogen with the TiO2 lattice. The lowering of the band-gap energy for the flame made N-doped TiO2 materials implies that the nitrogen doping in TiO2 by aerosol method is highly effective in extending the optical response of TiO2 in the visible region. The nitrogen atomic percentage has increased monotonically（0.09%-0.15%）with the increase in primary nitrogen source（nitric acid）, and significantly boosted to 0.97% when secondary nitrogen source（urea） was introduced. The highest rate of phenol degradation was obtained for catalysts with secondary N source due to increase in N content in the catalyst.

关键词： Flame spray pyrolysis(FSP) Titania (TiO2) Visible-light-induced Liquid phase Phenol photodegradation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

One-dimensional numerical investigation on multicylinder gasoline engine fueled by micro-emulsions,CNG,and hydrogen in dual fuel mode

引用

Chinese Journal of Aeronautics 2023年第5期36卷 57-65页

作者： Ufaith QADIRI D.siva KRISHNA reddy Amjad ALI PASHA Mohammad IRFAN ALAM Department of Mechanical Engineering Sreenidhi UniversityYamnampetGhatkesar Hyderabad 501301India School of Mechanical Engineering SRM Institute of Science and TechnologyKattankulathurChennai 603203India Aerospace Engineering Department King Abdulaziz UniversityJeddah 21589Saudi Arabia Department of Aerospace Engineering VIT Bhopal UniversitySehore 466665India

This research work is the novel state-of-the-art technology performed on multi-cylinder SI engine fueled compressed natural gas,emulsified fuel,and hydrogen as dual *** work predicts the overall features of performance,combustion,and exhaust emissions of individual fuels based on AVL Boost simulation *** types of alternative fuels have been compared and *** results show that hydrogen produces 20%more brake power than CNG and 25%more power than micro-emulsion fuel at 1500 r/min,which further increases the brake power of hydrogen,CNG,and micro-emulsions in the range of 25%,20%,and 15%at higher engine speeds of 2500-4000 r/min,*** addition,the brake-specific fuel consumption is the lowest for 100%hydrogen,followed by CNG 100%and then micro-emulsions at 1500 r/*** 2500-5000 r/min,there is a significant drop in brake-specific fuel consumption due to a lean mixture at higher engine *** CO,HC,and NOx emissions significantly improve for hydrogen,CNG,and micro-emulsion *** fuel shows zero CO and HC emissions and is the main objective of this research to produce 0%carbon-based emissions with a slight increase in NOx emissions,and CNG shows 30%lower CO emissions than micro-emulsions and 21.5%less hydrocarbon emissions than micro-emulsion fuel at stoichiometric air/fuel ratio.

关键词： CNG emissions Hydrogen Ignition Micro-emulsions Performance

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A Fast and Highly Efficient Protocol for Reductive Amination of Aromatic Aldehydes Using NaBH4 and Isoxazole Amines in an Ionic Liquid Medium

引用

Chinese Journal of Chemistry 2011年第4期29卷 769-772页

作者： Eligeti, Rajanarendar Atthunuri, siva Rami reddy Samala, Raju Shaik, Firoz Pasha Govardhan reddy Department of Chemistry Kakatiya University Warangal 506009 Andhra Pradesh India

Reductive amination of aromatic aldehydes using NaBH4 and isoxazole amines is carried out in a Bronsted acidic ionic liquid 1 -methylimidazolium tetrafluoroborate [（HMIm）BF4]. The ionic liquid plays dual roles of solvent as well as catalyst for the efficixcellent yields without any undesired side product formation. The newly synthesized compoundsent transformation of aromatic aldehydes to heterocyclic substituted amines in e （3, 6 and 7） were characterized by IR, 1H NMR and mass spectral techniques.

关键词： ionic liquid green chemistry reductive amination 1-methylimidazolium tetrafluoroborate isoxazole amine

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Expeditious method for the synthesis of novel 2,3,5,6-tetrahydrobenzo[g] [1,3,5]oxadiazocine-4-thiones linked with isoxazole

引用

Chinese Chemical Letters 2008年第12期19卷 1415-1418页

作者： E.Rajanarendar A.siva Rami reddy M.Srinivas Department of Chemistry Kakatiya UniversityWarangal 506009India

Synthesis of novel 3-aryl-5-（3,5-dimethylisoxazol-4-yl）-2,3,5,6-tetrahydrobenzo[g][1,3,5],oxadiazocine-4-thiones 5 has been accomplished from 3,5-dimethylisoxazol-4-amine 1 by condensation with salicylaldehydes, followed by reduction, treatment with aryl isothiocyanates and subsequent smooth ring closure via acetal formation in the presence of formaldehyde.

关键词： Isoxazolyl-2,3,5,6-tetrahydrobenzo[g]oxadiazocine-4-thiones Ring closure New methodology

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：