检索结果-南通市图书馆

Dual modification of LiNi_(0.83)Co_(0.11)Mn_(0.06)O_(2) cathode materials by K^(+) doping and Li_(3)PO_(4) coating for lithium ions batteries

引用

Rare Metals 2024年第7期43卷 3007-3018页

作者： Wei Xiao Jia-Le Wang Zhi-cheng Yi cheng-Jin Liu Chang miao Yu xin Shu-Qing Nie College of Chemistry and Environmental Engineering Yangtze UniversityJingzhou 434023China

Li_(3)PO_(4)@Li_(0.99)K_(0.01)Ni_(0.83)Co_(0.11)Mn_(O.06)O_(2)(NCM-KP) cathode powders are synthesized via K^(+)doping in calcination processes and H_3PO_4 coating in sol-gel processes.K^(+) precisely enters into the lattice to widen the(003) plane to 0.4746 nm with a lower cationic disordered degree of 1.87%.Moreover,the surface residual lithium salts are treated by H_3PO_4 to generate a uniform Li_(3)PO_(4) coating layer of approximately 11.41 nm,which completely covers on the surface of secondary spherical particles to improve the interfacial *** 25℃,the NCM-KP electrode delivers a discharge specific capacity of 148.9 mAh·g^(-1) with a remarkable capacity retention ratio of 84.1% after 200 cycles at 1.0C and retains a high reversible specific capacity of 154.4 mAh·g^(-1) at *** at 1.0C and 60℃,it can maintain a reversible discharge specific capacity of 114.6 mAh·g^(-1) with 0.21% of capacity decay per cycle after 200 cycles,which is significantly lower than 0.40% for the pristine NCM ***,the charge transfer resistance of 238.89 Ω for the NCM-KP electrode is significantly lower than 947.41 Ω for the pristine NCM one by restricting the interfacial side ***,combining K+doping and Li_(3)PO_(4) coating is an effective strategy to enable the significant improvement of the electrochemical property of high-nickel cathode materials,which may be mainly attributed to the widened diffusion pathway and the formed Li_(3)PO_(4) protective layer,thus promoting Li~+diffusion rate and preventing the erosion of HF.

关键词： High-nickel cathode material Residual lithium K^(+)doping Li_(3)PO_(4)coating Lithium ions battery

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Volume-averaged modeling of multiphase solidification with equiaxed crystal sedimentation in a steel ingot

引用

China Foundry 2024年第3期21卷 229-238页

作者： Xiao-lei Zhu Shuang Cao Rui Guan Ji Yang Zhe Ning xin-gang Ai Sheng-li Li xin-cheng miao The key Laboratory of Material Forming and Structure Property Control Anshan 114051LiaoningChina State Key Laboratory of Metal Material for Marine Equipment and Application Anshan 114009LiaoningChina School of Materials and Metallurgy University of Science and Technology LiaoningAnshan 114051LiaoningChina

Macrosegregation is a critical factor that limits the mechanical properties of *** impact of equiaxed crystal sedimentation on macrosegregation has been extensively studied,as it plays a significant role in determining the distribution of alloying elements and impurities within a *** improve macrosegregation in steel connecting shafts,a multiphase solidification model that couples melt flow,heat transfer,microstructure evolution,and solute transport was established based on the volume-averaged Eulerian-Eulerian *** this model,the effects of liquid phase,equiaxed crystals,columnar dendrites,and columnar-to-equiaxed transition(CET)during solidification and evolution of microstructure can be considered *** sedimentation of equiaxed crystals contributes to negative macrosegregation,where regions between columnar dendrites and equiaxed crystals undergo significant A-type positive macrosegregation due to the ***,noticeable positive macrosegregation occurs in the area of final solidification in the *** improvement in macrosegregation is beneficial for enhancing the mechanical properties of connecting *** mitigate the thermal convection of molten steel resulting from excessive superheating,reducing the superheating during casting without employing external fields or altering the design of the ingot mold is indeed an effective approach to control macrosegregation.

关键词： ingot casting multiphase solidification model equiaxed crystal sedimentation microstructure macrosegregation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Grain refinement of 5A06 aluminum alloy welds caused by tungsten inert gas welding arc characteristics under Ar-He alternating gas supply conditions:a coupled method of water-cooled copper plate test/numerical simulation

引用

Journal of Iron and Steel Research International 2024年第3期31卷 767-777页

作者： Hong-bin Dai Jian miao Jia-xin Lin School of Materials Science and Engineering Harbin University of Science and TechnologyHarbin 150040HeilongjiangChina

The welding arc,as a carrier for the conversion of electrical energy to thermal energy,has a direct impact on the quality of welding by its properties and *** the tungsten inert gas(TIG)welding process under the condition of Ar-He alternating gas supply,the arc is alternately converted between Ar arc and He arc with an alternating gas supply cycle,which has obvious arc change *** FLUENT software was used to numerically simulate the characteristics of the TIG arc under the condition of alternating gas supply,and the arc temperature field,arc pressure,electric potential and current density distribution under the condition of alternating gas supply were *** with the real-time data of arc pressure measured by the water-cooled copper plate with holes,it is proved that the TIG arc has obvious dynamic characteristics under the condition of Ar-He alternating gas *** unique dynamic TIG arc acts on the 5A06 aluminum alloy weld,causing the molten pool to stir,resulting in uniform microstructure and grain refinement at the weld,and thereby improving the mechanical properties of the welded joint.

关键词： Alternating gas supply Grain refinement Numerical simulation Tungsten argon arc morphology Microstructure Mechanical property

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Origin and evolution of false brinelling and fretting corrosion under rolling conditions

引用

Friction 2024年第4期12卷 618-631页

作者： xin JIA Lu HUANG miao SUN Wenbin LI National Institute of Metrology Beijing 100029China Yantai Tiancheng Machinery Co. Ltd.Yantai 264006China

Rolling bearings working in oscillating applications often suffer from false brinelling and fretting corrosion that limit their service *** present,the study of oscillation-induced failures is primarily dominated by a large number of sliding and bench ***,most of the previous work are not able to fully describe the two closely related but different failure *** this study,the origin and evolution of the two failures are thoroughly investigated under strictly controlled oscillating rolling *** results show that failure evolves from false brinelling to fretting corrosion under dry friction conditions regardless of the oscillation *** process is accompanied by a large area peeling and serious oxidation,and the oxygen content increases from 2.50 wt%to 21.22 wt%.Oxidation is a crucial factor in the evolution of false brinelling into fretting ***,the distribution of microwear and oxygen content depend on the oscillation *** lubrication conditions,the friction coefficient(COF)is smaller in the initial stage and led to local slip or transient instability of rolling ***,the size of the wear marks and COF increased and appeared to be larger than those under a dry friction ***,grease can separate the contact surfaces,only surface deformation owing to false brinelling and slight damage at the roughness level *** evolution of false brinelling and fretting corrosion is also closely related to residual *** brinelling often occurrs with residual stress accomulation,meanwhile,the residual stress increases from 120 to 300 *** peeling occurs,residual stress is *** failure pattern transformed from false brinelling to fretting corrosion and is accompanied by *** far,none of investigation is able to show satisfactory evolution of oscillating-induced failures,this study may contribute to more scientific understanding of rolling bearings against long-

关键词： oscillating false brinelling fretting corrosion wear residual stress

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Synchronous deprotonation–protonation for mechanically robust chitin/aramid nanofibers conductive aerogel with excellent pressure sensing, thermal management, and electromagnetic interference shielding

引用

Nano Research 2024年第3期17卷 2038-2049页

作者： xinxin Zhang Kunpeng Qian Jianhui Fang Sineenat Thaiboonrod miao miao xin Feng Department of Chemistry College of SciencesShanghai UniversityShanghai 200444China Research Center of Nano Science and Technology College of SciencesShanghai UniversityShanghai 200444China School of Materials Sciences and Engineering Shanghai UniversityShanghai 200444China National Nanotechnology Center(NANOTEC) National Science and Technology Development Agency(NSTDA)Thailand Science ParkPathum Thani 12120Thailand

Aerogels with regularly porous structure and uniformly distributed conductive networks have received extensive attention in wearable electronic sensors,electromagnetic shielding,and so ***,the poor mechanical properties of the emerging nanofibers-based aerogels are limited in practical *** this work,we developed a synchronous deprotonation–protonation method in the KOH/dimethyl sulfoxide(DMSO)system at room temperature for achieving chitin cross-linked aramid nanofibers(CANFs)rather than chitin nanofibers(ChNFs)and aramid nanofibers(ANFs)separately by using chitin and aramid pulp as raw *** freeze-drying process,the cross-linked chitin/aramid nanofibers(CA)aerogel exhibited the synergetic properties of ChNF and ANF by the dual-nanofiber compensation *** mechanical stress of CA aerogel was 170 kPa at 80%compressive strain,increased by 750%compared with pure ChNF ***,the compressibility of CA aerogel was somewhat improved compared to ANF *** enhancement verified that the crosslinking reaction between ANF and ChNF during the synchronous deprotonation process was ***,the conductive aerogels with uniform porous structure(CA-M)were successfully obtained by vacuum impregnating CA aerogels in Ti_(3)C_(2)T_(x) MXene solution,displaying low thermal conductivity(0.01 W/(m·K)),high electromagnetic interference(EMI)shielding effectiveness(SE)(75 dB),flame retardant,and heat ***,the as-obtained CA-M aerogels were also applied as a pressure sensor with excellent compression cycle stability and superior human motion monitoring *** a result,the dual-nanofiber based conductive aerogels have great potentials in flexible/wearable electronics,EMI shielding,flame retardant,and heat insulation.

关键词： synchronous deprotonation–protonation electromagnetic interference(EMI)shielding flame retardant heat insulation pressure sensing

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Numerical Modeling of Turbulent Melt Flow in a Continuous Casting Mold Affected by an Electromagnetic Brake

引用

Journal of Iron and Steel Research International 2012年第S2期19卷 845-848页

作者： miao xin-cheng Timmel Klaus Lucas Dirk REN Zhong-ming Eckert Sven Gerbeth Gunter MHD Department Helmholtz-Zentrum Dresden-Rossendorf(HZDR) Key Laboratory of Metallurgy & Materials Processing Shanghai University

The current work combines numerical and experimental investigations based on a small-scale mockup using the eutectic alloy *** jet flow discharging from the submerged entry nozzle was exposed perpendicularly to a DC magnetic field across the entire wide face of the *** calculations were performed by using the commercial package CFX with an implemented RANS-SST turbulence *** anisotropic properties of the MHD turbulence were taken into account by specific modifications of the turbulence *** comparison between our numerical calculations and the experimental results shows a very well *** particular,the modified RANS-SST turbulence model is capable to reconstruct the peculiar phenomenon of the excitation of non-steady,non-isotropic large-scale flow perturbations caused by the application of the DC magnetic *** important finding of our study is the feature that the electrical boundary conditions,namely the wall conductivity ratio,have a great impact on the mold flow subjected to an external magnetic field.

关键词： continuous casting electromagnetic brake RANS-SST turbulence model MHD turbulence

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

An adaptive large neighborhood search for the multi-point dynamic aggregation problem

引用

Control Theory and Technology 2024年第3期22卷 360-378页

作者： Shengyu Lu Bin xin Jie Chen miao Guo School of Automation Beijing Institute of TechnologyBeijing 100081China National Key Lab of Autonomous Intelligent Unmanned Systems Beijing 100081China Department of Control Science and Engineering Tongji UniversityShanghai 201804China

The multi-point dynamic aggregation(MPDA)problem is a challenging real-world *** the MPDA problem,the demands of tasks keep changing with their inherent incremental rates,while a heterogeneous robot fleet is required to travel between these tasks to change the time-varying state of each *** robots are allowed to collaborate on the same task or work separately until all tasks are *** is challenging to generate an effective task execution plan due to the tight coupling between robots abilities and tasks'incremental rates,and the complexity of robot *** effectiveness consideration,we use the variable length encoding to avoid redundancy in the solution *** creatively use the adaptive large neighborhood search(ALNS)framework to solve the MPDA *** the proposed algorithm,high-quality initial solutions are generated through multiple problem-specific solution construction *** heuristics are also used to fix the broken solution in the novel integrated decoding-construction repair process of the ALNS *** results of statistical analysis by the Wilcoxon rank-sum test demonstrate that the proposed ALNS can obtain better task execution plans than some state-of-the-art algorithms in most MPDA instances.

关键词： Adaptive large neighborhood search(ALNS) Multi-point dynamic aggregation(MPDA) Heuristic solution construction Multi-robot collaboration

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Editorial Commentary:Top Five Stories of the Cellular Landscape and Therapies of Atherosclerosis:Current Knowledge and Future Perspectives

引用

Current Medical Science 2024年第1期44卷 241-243页

作者： miao YU Xiang cheng Department of Cardiology Union HospitalTongji Medical CollegeHuazhong University of Science and TechnologyWuhan 430022China Hubei Key Laboratory of Biological Targeted Therapy Union HospitalTongji Medical CollegeHuazhong University of Science and TechnologyWuhan 430022China Hubei Provincial Engineering Research Center of Immunological Diagnosis and Therapy for Cardiovascular Diseases Union HospitalTongji Medical CollegeHuazhong University of Science and TechnologyWuhan 430022China

Atherosclerosis(AS)is the main underlyingpathology of atherosclerotic cardiovascular disease(ASCVD),which is the leading cause of mortality inthe worldwide[1,2].Since the 19th century,Virchowhas already stated that AS is a chronic inflammatorystate induced by *** that,it took at leastthree decades’worth of study to establish the multipleinflammatory pathways related to AS.

关键词： Virchow mortality cardiovascular

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Shock Initiation Experiments with Modeling on a DNAN Based MeltCast Insensitive Explosive

引用

Defence Technology（防务技术） 2024年第2期32卷 655-662页

作者： Feichao miao Dandan Li Yangfan cheng Junjiong Meng Lin Zhou School of Chemical Engineering Anhui University of Science and TechnologyHuainan 232001China Composite Explosive Research Department Xi'an Modern Chemistry Research InstituteXi'an 710065China State Key Laboratory of Explosion Science and Technology Beijing Institute of TechnologyBeijing 100081China

2,4-dinitroanisole(DNAN)is a good replacement for 2,4,6-trinitrotoluene(TNT)in melt-cast explosives due to its superior *** the increasing use of DNAN-based melt-cast explosives,the prediction of reaction violence and hazard assessment of the explosives subjected to shock is of great *** study investigated the shock initiation characteristics for a DNAN-based melt-cast explosive,DHFA,using the one-dimensional Lagrangian *** embedded manganin gauges in the apparatus record the pressure histories at four Lagrangian positions and show that shock-todetonation transition in DHFA needs a high input shock *** experimental data are analyzed to calibrate the Ignition and Growth *** calibration is performed using an objective function based on both pressure history and the arrival time of *** agreement between experimental and calculated pressure histories indicates the high accuracy of the calibrated parameters with the optimization method.

关键词： 2,4-Dinitroanisole(DNAN) Shock initiation Insensitive explosives Ignition and growth model Equation of state(EOS)

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Model-driven path planning for robotic plasma cutting of branch pipe with single Y-groove based on pipe-rotating scheme

引用

Advances in Manufacturing 2024年第1期12卷 94-107页

作者： Yan Liu Qiu Tang xin-cheng Tian School of Control Science and Engineering Shandong UniversityJinan250061People’s Republic of China Engineering Research Center of Intelligent Unmanned System Ministry of EducationJinan250061People’s Republic of China School of Mechanical and Electronic Engineering Shandong Jianzhu UniversityJinan250101People’s Republic of China

The automatic cutting of intersecting pipes is a challenging task in *** improved automation and accuracy,this paper proposes a model-driven path planning approach for the robotic plasma cutting of a branch pipe with a single ***,it summarizes the intersection forms and introduces a dual-pipe intersection *** on this model,the moving three-plane structure(a description unit of the geometric characteristics of the intersecting curve)is constructed,and a geometric model of the branch pipe with a single Y-groove is ***,a novel mathematical model for plasma radius and taper compensation is ***,the compensation model and groove model are integrated by establishing movable ***,to prevent collisions between the plasma torch and workpiece,the torch height is planned and a branch pipe-rotating scheme is *** the established models and moving frames,the planned path description of cutting robot is provided in this novel *** accuracy of the proposed method is verified by simulations and robotic cutting experiments.

关键词： Automatic groove cutting of intersecting pipes Model-driven robot path planning Plasma beam radius and taper compensation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：