检索结果-南通市图书馆

增材制造Ti6Al4V合金的闪速等离子体电解氧化与在生理介质中的电化学行为

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Transactions of Nonferrous metals Society of China 2024年第4期34卷 1150-1166页

作者： h.mOrA-SANChEZ C.rAmOS m.mOhEDANO B.TOrrES r.ArrABAL E.mATYKINA Departamento de Ingeniería Química y de materiales Facultad de Ciencias QuímicasUniversidad Complutense de Madrid28040 MadridSpain CIDETEC Basque Research and Technology Alliance(BRTA)Po.Miramón 19620014 Donostia-San SebastiánSpain Departamento matemática Aplicada Ciencia e Ingeniería de Materiales y Tecnología ElectrónicaUniversidad Rey Juan CarlosC/Tulipán s/nMóstoles 28933MadridSpain

研究激光粉末床熔融增材制造(Am)(又称直接金属激光烧结)技术制备的Ti6Al4V合金等离子体电解氧化(PEO)处理及其电化学行为。通过短时间(<120 s)PEO处理(也称闪速PEO),在Am合金和传统合金表面制备了3~10μm厚、含Ca和P的涂层。然后在改... 详细信息

研究激光粉末床熔融增材制造(Am)(又称直接金属激光烧结)技术制备的Ti6Al4V合金等离子体电解氧化(PEO)处理及其电化学行为。通过短时间(m合金和传统合金表面制备了3~10μm厚、含Ca和P的涂层。然后在改良的α-mEm溶液中,通过动电位极化曲线和电化学阻抗谱(EIS)评估了合金的电化学行为。与传统合金相比,Am合金中形成了细小的层片状α显微组织和层间小尺寸的β相颗粒,这促使了火花的产生,从而促进了PEO涂层的生长。闪速PEO涂层提高了传统合金和Am合金的耐腐蚀性,最薄的涂层(m)提供了高达3倍的保护。Am Ti6Al4V由于其高的晶界密度,易受局部缝隙腐蚀的影响。而即使短至35 s的闪速PEO处理也足以成功避免这种情况。

关键词：增材制造激光粉末床熔融等离子体电解氧化闪速PEO 钛缝隙腐蚀 α-mEm

同方期刊数据库

Free vibration and buckling analysis of polymeric composite beams reinforced by functionally graded bamboo fbers

在线全文

学校读者我要写书评

暂无评论

Applied mathematics and mechanics(English Edition) 2024年第3期45卷 543-562页

作者： h.m.FEIZABAD m.h.YAS Department of mechanical Engineering Razi UniversityKermanshah ***Iran

Natural fibers have been extensively researched as reinforcement materials in polymers on account of their environmental and economic advantages in comparison with synthetic fibers in the recent *** fibers are renowned for their good mechanical properties,abundance,and short cycle *** beams are one of the fundamental structural components and are susceptible to mechanical loads in engineering applications,this paper performs a study on the free vibration and buckling responses of bamboo fiber reinforced composite(BFrC)beams on the elastic *** different functionally graded(FG)layouts and a uniform one are the considered distributions for unidirectional long bamboo fibers across the *** elastic properties of the composite are determined with the law of *** hamilton’s principle,the governing equations of motion are *** generalized differential quadrature method(GDQm)is then applied to the equations to obtain the *** achieved outcomes exhibit that the natural frequency and buckling load values vary as the fiber volume fractions and distributions,elastic foundation stiffness values,and boundary conditions(BCs)and slenderness ratio of the beam ***,a comparative study is conducted between the derived analysis outcomes for BFrC and homogenous polymer beams to examine the effectiveness of bamboo fibers as reinforcement materials,demonstrating the significant enhancements in both vibration and buckling responses,with the exception of natural frequencies for cantilever beams on the Pasternak foundation with the FG-◇fiber ***,the obtained analysis results of BFrC beams are also compared with those for carbon nanotube reinforced composite(CNTrC)beams found in the literature,indicating that the buckling loads and natural frequencies of BFrC beams are lower than those of CNTrC beams.

关键词： bamboo fiber free vibration buckling analysis functionally graded(FG)beam elastic foundation generalized differential quadrature method(GDQm)

Influence of erbium on structural,and charged particles,photons,and neutrons shielding properties of Ba_(1-x)Er_(x)SnO_(3) perovskite ceramics

在线全文

学校读者我要写书评

暂无评论

Journal of rare Earths 2024年第4期42卷 724-732页

作者： m.K.h.hamad Nidal Dwaikat m.h.A.mhareb m.I.Sayyed r.m.hamad Y.S.m.Alajerami m.A.Almessiere Gameel Saleh Ahmad hussein Alomari K.A.Ziq Department of Basic Sciences School of Social and Basics SciencesAl Hussein Technical UniversityKing Abdullah II St 242Amman11831Jordan Department of Physics College of Engineering and PhysicsInterdisciplinary Research Center for Advanced MaterialsKing Fahd University of Petroleum&MineralsDhahran31261Saudi Arabia Department of Physics College of ScienceImam Abdulrahman Bin Faisal UniversityP.O.Box 1982Dammam31441Saudi Arabia Basic and Applied Scientific research Center Imam Abdulrahman Bin Faisal UniversityP0.Box 1982Dammam31441Saudi Arabia Department of Physics Faculty of ScienceIsra UniversityAmman11622Jordan Department of Nuclear medicine research Institute for Research and Medical Consultations(IRMC)Imam Abdulrahman Bin Faisal UniversityPo.Box 1982Dammam31441Saudi Arabia medical Imaging Department Applied Medical Sciences FacultyAl Azhar University-Gaza CityPo.Box 1277Palestine Department of Biophysics Institute for Research and Medical Consultations(IRMC)Imam Abdulrahman Bin Faisal UniversityPo.Box1982Dammam 31441Saudi Arabia Department of Biomedical Engineering College of EngineeringImam Abdulrahman Bin Faisal UniversityPo.Box 1982Dammam31441Saudi Energy&minerals regulatory Commission Amman11821Jordan

Five perovskite ceramics samples of Ba_(1-x)Er_(x)SnO_(3) with x=0.00,0.05,0.10,0.15,and 0.20 were synthesized using the conventional solid-state reaction *** prepared samples were characterized by X-ray diffraction(XrD),Fourier transforms infrared(FTIr),and UV-Vis *** shielding properties against ionizing radiation were also *** XrD analysis shows the perovskite cubic structure as the major phase in all *** FTIr reveals a distinctive band around 614-620 cm^(-1) ascribed to the antisymmetric O-Sn-O ***-Vis spectroscopy was used to determine the bandgap according to diffuse reflectance,and the results display a fixed enhancement in the bandgap from 3.2 to 3.3 eV for all ***-ray shielding properties of the synthesized samples were experimentally measured and compared with XCOm computational *** relative differences(Δ,%)between experimental and theo retical values are low and fall within the 0.446%-7.10%*** addition of Er leads to the enhanced density,neutron,and gamma shielding *** contrast,charged particles’shielding parameters gradually reduce with rising Er *** results suggest that Ba_(1-x)Er_(x)SnO_(3) samples can be used in different radiation shielding applications.

关键词： Perovskite Ceramics Gamma ray shielding mass stopping power rare earths

Sufu突变通过调控Gli1促进肺腺癌恶性进展

在线全文

学校读者我要写书评

暂无评论

陆军军医大学学报 2024年第10期46卷 1142-1149页

作者：刘继宏罗虎衣杏林周向东陆军军医大学(第三军医大学)第一附属医院呼吸与危重症医学科重庆400038

目的观察Sufu在肺腺癌中的突变情况以及Sufu突变后对Gli1转录调控的变化,探讨Sufu对肺腺癌进展的作用。方法通过cBioPortal网站获取Sufu在肺癌中的突变情况;构建4个Sufu单碱基突变载体;在肺腺癌细胞株(A549和h1975)中分别对Sufu进行过... 详细信息

目的观察Sufu在肺腺癌中的突变情况以及Sufu突变后对Gli1转录调控的变化,探讨Sufu对肺腺癌进展的作用。方法通过cBioPortal网站获取Sufu在肺癌中的突变情况;构建4个Sufu单碱基突变载体;在肺腺癌细胞株(A549和h1975)中分别对Sufu进行过表达和敲除;通过细胞划痕实验检测Sufu对肺腺癌细胞迁移能力的影响;通过rT-qPCr、细胞免疫荧光和双荧光素酶报告基因实验观测Sufu突变后对Gli1转录水平的影响。结果cBioPortal网站数据显示:Sufu在肺腺癌中突变率分别为11.76%(肺鳞癌:2/17)、0.96%(肺腺癌:6/625)、1.01%(小细胞肺癌:4/396)和0.69%(非小细胞肺癌:77/11227);Sufu发生突变后,肺癌患者中位生存期显著降低[54.34(未突变组)vs 38.00(突变组)个月,hr=1.943,Ph1975中,过表达Sufu能抑制细胞迁移(Pm突变能上调Gli1的转录水平(P<0.05)。结论Sufu对肺腺癌转移有抑制作用,Sufu具有成为肺腺癌转移治疗靶点的潜力。

关键词：肺腺癌 hedgehog信号通路 Sufu Gli1

进一步改善城市网-厂-水体污水系统升级改造和运行效率的四点看法

在线全文

学校读者我要写书评

暂无评论

给水排水 2024年第4期50卷 137-144页

作者：曹业始 KrOISS h VAN LOOSDrEChT m DAIGGEr G T 中持新概念环境发展宜兴有限公司宜兴214213 维也纳工业大学水质和资源管理研究所奥地利维也纳1040 代尔夫特理工大学生物技术系荷兰代尔夫特2629HZ 密歇根大学土木和环境工程系美国密歇根州48109

2022年,《深入打好城市黑臭水体治理攻坚战实施方案》发布,要求努力解决河流雨后黑臭和雨季河流断面水质下降问题,力争到2025年,进水BOD浓度高于100毫克/升的城市生活污水处理厂规模占比达90%以上,城市生活污水集中收集率达到70%以上。... 详细信息

2022年,《深入打好城市黑臭水体治理攻坚战实施方案》发布,要求努力解决河流雨后黑臭和雨季河流断面水质下降问题,力争到2025年,进水BOD浓度高于100毫克/升的城市生活污水处理厂规模占比达90%以上,城市生活污水集中收集率达到70%以上。水行业正面临着防止雨后河流返黑和改善雨季河流水质等新任务。因此,结合近年来成绩、实践和欧美的经验教训,提出和讨论了与进一步改善网-厂-水体城市污水系统升级改造及运行效率相关的四个问题:分流制管网有没有外(雨)水入侵和溢流、污水处理厂的进水浓度应多高、为什么部分污水处理厂需局部扩容、为什么污水管道中流速低于自净流速,并在此基础上,对相关工作提出了建议。

关键词：城市污水系统污水管网外水入侵雨水溢流污水浓度污水处理厂扩容水环境容量

Fast efficient photon deceleration in plasmas by using two laser pulses at different frequencies

在线全文

学校读者我要写书评

暂无评论

matter and radiation at Extremes 2024年第3期9卷 11-18页

作者： Y.X.Wang X.L.Zhu S.m.Weng P.Li X.F.Li h.Ai h.r.Pan Z.m.Sheng Key Laboratory for Laser Plasmas(moe) School of Physics and AstronomyShanghai Jiao Tong UniversityShanghai 200240China Collaborative Innovation Center of IFSA Shanghai Jiao Tong UniversityShanghai 200240China research Center of Laser Fusion of China Academy of Engineering Physics MianyangSichuan 621900China State key Laboratory of high Field Laser Physics Shanghai Institute of Optics and Fine MechanicsChinese Academy of SciencesShanghai 201800China Tsung-dao Lee Institute Shanghai Jiao Tong UniversityShanghai 200240China

The generation of ultrashort high-power light sources in the mid-infrared(mid-Ir)to terahertz(Thz)range is of interest for applications in a number of fields,from fundamental research to biology and *** conventional laser technology,photon deceleration in plasma wakes provides an alternative approach to the generation of ultrashort mid-Ir or Thz ***,we present a photon deceleration scheme for the efficient generation of ultrashort mid-Ir or Thz pulses by using an intense driver laser pulse with a relatively short wavelength and a signal laser pulse with a relatively long *** signal pulse trails the driver pulse with an appropriate time delay such that it sits at the front of the second wake bubble that is driven by the driver *** to its relatively long wavelength,the signal pulse will be subjected to a large gradient of the refractive index in the plasma wake ***,the photon deceleration in the plasma wake becomes faster and more efficient for signal pulses with longer *** greatly enhances the capacity and efficiency of photon deceleration in the generation of ultrashort high-power light sources in the long-wavelength Ir and Thz spectral ranges.

关键词： laser ultrashort photon

Kaoline-based catalyst for a high stability desulfurization of sour heavy naphtha in a three-phase oscillatory baffled reactor

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Particuology 2024年第1期84卷 249-260页

作者： hassan m.hmood Saba A.Gheni Safaa m.r.Ahmed mudheher m.Ali hamid Yonis Saleh mohammed h.mohammed Awad E.mohammed marwan A.mahomood hiba r.mohammed Ahmed A.hassan Adam harvey North refineries Company Ministry of OilIraq Chemical Engineering Department Tikrit UniversityIraq ministry of Oil Iraq AL-hawija Technical Institute Northern Technical UniversityMoselIraq School of Engineering Newcastle UniversityUK

To meet the rapidly increasing demand for energy and the dramatic depletion of conventional crude oil,it is imperative to utilize sour *** no coke being produced,oxidative desulfurization(ODS)of naphtha lowers its sulfur content and average molecular *** this article,we outline a method for heavy naphtha non-extractive ODS using a very stable *** technique involves the use of a solid catalyst with oxygen gas as the *** necessitated relatively high mixing intensities;hence a three-phase Oscillatory Baffled reactor(OBr)was *** catalyst was based on the zeolite ZSm-5,prepared from natural kaolin by a series of delamination and activation steps and impregnated with Fe.A TiO2 nanolayer was applied,using the sol-gel method,to prevent rapid *** reactor performance was evaluated to minimize the sulfur content in the naphtha *** to the protective coating,the sulfur conversion stabilized at 90%.The results of this work establish the use of natural clay-based catalysts in a continuous,three-phase ODS,particularly with regard to proving long-term *** also showed that modest ODS can be achieved using an environmentally friendly oxidant,at mild operating conditions,whilst maintaining stability.

关键词： Natural kaoline Desulfurization Three-phase Oscillatory baffled reactor

Dysprosium oxide,alumina,and graphene oxide reinforced polycaprolactone thin films:Thermal stability,morphology,and cell viability

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of rare Earths 2024年第7期42卷 1337-1343,I0005页

作者： mohamed Tharwat Elabbasy mohamed r.Atteya mai A.Samak mousa Abdelrahman Tahani Almahmoud m.A.El-morsy A.A.menazea m.F.h.Abd El-Kader Department of Public health College of Public Health and Health InformaticsUniversity of Ha'ilHa'il2440Saudi Arabia Food Control Department Faculty of Veterinary MedicineZagazig UniversityZagazig44519Egypt Department of Physical Therapy College of Applied Medical SciencesUniversity of Ha'ilHa'ilSaudi Arabia Department of histology and Cell Biology Faculty of MedicineZagazig UniversityZagazig44519Egypt College of Nursing University of Ha'ilHa'ilSaudi Arabia College of Science and humanities in Al-Kharj Physics DepartmentPlasma Technology and Material Science UnitPrince Sattam Bin Abdulaziz UniversityAl-kharj11942Saudi Arabia Physics Department Faculty of ScienceUniversity of DamiettaNew Damietta34517Egypt Spectroscopy Department Physics Research InstituteNational Research CentreDokki12622GizaEgypt Biophysics Department Faculty of ScienceCairo UniversityGizaEgypt

Developing a biomaterial for wound healing applications is still a ***,dysprosium oxide(Dy_(2)O_(3)),aluminum oxide(Al_(2)O_(3)),and graphene oxide(GO)were embedded in cast films based on polycaprolactone(PCL)to be examined for wound dressing *** techniques were used to characterize the fabricated films including X-ray diffraction(XrD),Fourier transform infrared spectroscopy(FTIr),raman,and scanning electron microscopy(SEm),besides their biological *** thermogravimetric analysis(TGA)exhibits high thermal stability as the scaffold weight decreases slightly to 98.6%after raising the temperature from room temperature to 280℃.The cell viability was investigated and it is shown that the viable cells grow up to approximately 93%at 75μg/***,the cell attachment shows excellent behavior as the cells attach on most of the surface of the modified PCL which shows high biocompatibility.

关键词： Wound healing Polycaprolactone Dy_(2)O_(3) Al_(2)O_(3) Biocompatible rare earths

Effect of cold-working on corrosion induced damage in lug joints

在线全文

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第6期36卷 175-182页

作者： ramanath m.N Chikmath L. murthy h. Department of Aerospace Engineering Indian Institute of Technology-MadrasChennai 600036India Department of Aeronautical Engineering KLS Gogte Institute of TechnologyBelagavi 590008India

Lug joints are preferred joineries for transferring heavy loads to parent components in aerospace *** experience corrosion due to environmental conditions,improper surface finishes and rubbing displacement between the pin and *** causes damage of different sizes and shapes near the *** degradation due to corrosion-induced damage is modelled as a through-pit at one of the identified critical locations through stress *** effect of this pit on fatigue crack initiation life is ***-hole is pre-stressed by cold-working and the benefits of inducing plastic wake on the intended performance of the lug joint during the damages due to corrosion are brought out and compared with non-cold-worked *** analysis is performed on this lug joint with *** results obtained highlight the benefits of cold-working and the methodology can be extended to damage growth and analyse the effect of surface treatments for better structural integrity of components of aerospace vehicles.

关键词： Lug joint Corrosion Crack initiation Cold-working Structural integrity