检索结果-南通市图书馆

magnetic, Dielectric and Complex Impedance Properties of xBa_(0.95)Sr_(0.05)TiO_3–(1-x)BiFe_(0.9)Gd_(0.1)O_3multiferroic Ceramics

引用

Acta metallurgica Sinica(English Letters) 2016年第6期29卷 505-517页

作者： m.j.miah A.K.m.Akther Hossain Department of Physics Bangladesh University of Engineering and Technology Department of Physics Comilla University

xBa_（0.95）Sr_（0.05）TiO_3–（1-x）BiFe_（0.9）Gd_（0.1）O_3[x BST–（1-x）BFGO]（x = 0.00, 0.10, 0.20 and 0.25） multiferroic ceramics were prepared by the standard solid-state reaction technique. Structural characterization was performed by X-ray diffraction. All the samples showed rhombohedral distorted perovskite structure. Surface morphology of the ceramics was studied by the field emission scanning electron microscope（FESEm）. From the FESEm observation, the grain size was observed to be decreased with increasing BST content. Enhanced magnetic properties were observed in BFGO with the increase in BST content because of large lattice distortion. The complex initial permeability increased with the increasing of BST content. The study of dielectric properties showed that the dielectric constant increased, whereas dielectric loss decreased with increasing of BST content due to the reduction of oxygen vacancies. An analysis of the electric impedance and modulus with frequency was performed at different temperatures. Non-Debye-type relaxation processes occur in the compound which was confirmed from the nature of the Cole–Cole plot. The DC conductivity was found to increase with the rise in temperature which indicates the semiconducting behavior of the compound with characteristics of the negative temperature coefficient of resistance. The activation energy, responsible for the relaxation determined from the modulus spectra（0.246 eV）, was found to be almost same as the value obtained from the impedance study（0.240 eV）, indicating that charge carriers overcome the same energy barrier during relaxation. The frequency response of imaginary parts of electric impedance and modulus suggested that the relaxation in xB ST–（1-x）BFGO ceramics follows the same mechanism at various temperatures.

关键词： magnetic properties Dielectric properties Impedance spectroscopy Activation energy

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Surface morphology and impurity distribution of electron beam recrystallized silicon films on low cost substrates for solar cell absorber

引用

Rare metals 2006年第z1期25卷 195-200页

作者： GROmBALL F müLLER j Department of mikrosystemtechnik Technische Universitt Hamburg-Harburg Hamburg 21073 Germany

A line shaped electron beam recrystallised polycrystalline silicon film on the low cost substrate was investigated for the use of the solar cell absorber. The applied EB energy density strongly influences the surface morphology of the film system. Lower EB energy density results in droplet morphology and the rougher SiO2 capping layer due to the low fluidity. With the energy increasing, the capping layer becomes smooth and continuous and less and small pinholes form in the silicon film. Tungstendisilicide (WSi2) is formed at the interface tungsten/silicon but also at the grain boundaries of the silicon. Because of the fast melting and cooling of the silicon film, the eutectic of silicon and tungstendisilicide mainly forms at the grain boundary of the primary silicon dendrites. The SEm-EDX analysis shows that there are no chlorine and hydrogen in the area surrounding a pinhole after recrystallization because of outgassing during the solidification.

关键词： polycrystalline silicon film solar cell recrystallization energy surface morphology outgassing

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Algebraic and group treatments to nonlinear displaced number states and their nonclassicality features:A new approach

引用

Chinese Physics B 2015年第6期24卷 334-340页

作者： N Asili Firouzabadi m K Tavassoly m j Faghihi Atomic and molecular Group Faculty of PhysicsYazd University The Laboratory of Quantum Information Processing Yazd University Physics and Photonics Department Graduate University of Advanced Technology

Recently, nonlinear displaced number states （NDNSs） have been manually introduced, in which the deformation function f（n） has been artificially added to the previously well-known displaced number states （DNSs）. Indeed, just a simple comparison has been performed between the standard coherent state and nonlinear coherent state for the formation of NDNSs. In the present paper, after expressing enough physical motivation of our procedure, four distinct classes of NDNSs are presented by applying algebraic and group treatments. To achieve this purpose, by considering the DNSs and recalling the nonlinear coherent states formalism, the NDNSs are logically defined through an algebraic consideration. In addition, by using a particular class of Gilmore-Perelomov-type of SU（1,1） and a class of SU（2） coherent states, the NDNSs are introduced via group-theoretical approach. Then, in order to examine the nonclassical behavior of these states, sub-Poissonian statistics by evaluating mandel parameter and Wigner quasi-probability distribution function associated with the obtained NDNSs are discussed, in detail.

关键词： displaced number state nonlinear coherent state Wigner function nonclassical state

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

The analysis of composite laminated beams using a 2D interpolating meshless technique

引用

Acta mechanica Sinica 2018年第1期34卷 99-116页

作者： S.H.m.Sadek j.Belinha m.P.L.Parente R.m.Natal jorge j.m.A.César de Sá A.j.m.Ferreira Department of mechanical Engineering Faculty of EngineeringUniversity of Porto Institute of mechanical Engineering and Industrial management University of Porto

Laminated composite materials are widely implemented in several engineering constructions. For its relative light weight, these materials are suitable for aerospace, military, marine, and automotive structural applications. To obtain safe and economical structures, the modelling analysis accuracy is highly relevant. Since meshless methods in the recent years achieved a remarkable progress in computational mechanics, the present work uses one of the most flexible and stable interpolation meshless technique available in the literature—the Radial Point Interpolation method(RPIm).Here, a 2 D approach is considered to numerically analyse composite laminated beams. Both the meshless formulation and the equilibrium equations ruling the studied physical phenomenon are presented with detail. Several benchmark beam examples are studied and the results are compared with exact solutions available in the literature and the results obtained from a commercial finite element software. The results show the efficiency and accuracy of the proposed numeric technique.

关键词： Radial point interpolators RPIm Laminated beam meshless method

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Two-fluid modeling of Geldart A particles in gas-fluidized beds

引用

Particuology 2008年第6期6卷 540-548页

作者： m.A. van der Hoef j.A.m. Kuipers Faculty of Science & Technology University of Twente

We have investigated the effect of cohesion and drag models on the bed hydrodynamics of Geldart A particles based on the two-fluid （TF） model. For a high gas velocity U0 = 0.03 m/s, we found a transition from the homogeneous fluidization to bubbling fluidization with an increase of the coefficient C1, which is used to account for the contribution of cohesion to the excess compressibility. Thus cohesion can play a role in the bed expansion of Geldart A particles. Apart from cohesion, we have also investigated the influence of the drag models. When using the Wen and Yu drag correlation with an exponent n = 4.65, we find an under-prediction of the bed expansion at low gas velocities （U0 = 0.009 m/s）. When using a larger exponent （n = 9.6）, as reported in experimental studies of gas-fluidization, a much better agreement with the experimental bed expansion is obtained. These findings suggest that at low gas velocity, a scale-down of the commonly used drag model is required. On the other hand, a scale-up of the commonly used drag model is necessary at high gas velocity （U0 = 0.2 and 0.06 m/s）. We therefore conclude that scaling the drag force represent only an ad hoc way of repairing the deficiencies of the TF model, and that a far more detailed study is required into the origin of the failure of the TF model for simulating fluidized beds of fine powders.

关键词： Gas-fluidized bed Geldart A particles Two-fluid model Cohesive force Drag correlation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effects of thermal boundary conditions on the joule heating of electrolyte in a microchannel

引用

journal of Hydrodynamics 2016年第5期28卷 850-862页

作者： m. Y. ABDOLLAHZADEH jAmALABADI j. H. PARK m. m. RASHIDI j. m. CHEN Department of Ship Engineering Chabahar Maritime University Chabahar Iran Department of Aerospace and System Engineering Gyeongsang National University Jinju Korea . Engineering Faculty of Bu-Ali Sina University Hamedan Iran Department of mechanical and Nuclear Engineering Kansas State University Manhattan USA

joule heating effects on a slit microcharmel filled with electrolytes are comprehensively investigated with emphasis on the thermal boundary conditions. An accurate analytical expression is proposed for the electrical field and the temperature distributions due to joule heating are numerically obtained from the energy balance equation. The results show that a thermal design based on the average electric potential difference between electrodes can cause severe underestimation of joule heating. In addition, the parame- tric study of thermal boundary conditions gives us an insight into the best cooling scenario for microfluidic devices. Other significant thermal characteristics, including Nusselt number, thermophoretic force, and entropy generation, are discussed as well. This study will provide useful information for the optimization of a biomEmS device in relation to the thermal aspect.

关键词： microchannel electrolyte joule heating Nusselt number thermophoretic force entropy generation optimized thermaldesign

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

COmPOSITION AND RHEOLOGY OF POLYAmIDE-6 OBTAINED BY USING BI-AND TRI-FUNCTIONAL COUPLING AGENTS

引用

Chinese journal of Polymer Science 2013年第1期31卷 58-70页

作者： j.j.m. Slot E. van Ruymbeke P.A.m. Steeman materials Science Centre DSM Research Department of mathematics and Computer Science Eindhoven University of Technology

A statistical approach is developed, based on a monte Carlo method, in order to determine the statistical composition of a polyamide-6 sample composed of caprolactam （an AB-type monomer） and of a di-acid （A2 type） or a tri- acid （A3 type） as coupling agents. For this composition, the linear theological behavior of these systems is predicted using a tube-based theory. This allows us to show that while coupling agents of type A2 can be seen as flow improver, the effect of branching agents of type A3, depending on the synthesis recipe and the conversion level, can lead either to an increase or to a decrease of the viscosity. By adding specific amount of these agents, we also show that it is possible to obtain materials with the same zero-shear viscosity but with different shear thinning behavior. Furthermore, the polydispersity of linear samples of the same average number molecular weight, mn, is discussed in function of the amount of A2 monomers they contain. Ranging from 2 to 1.5, this difference in polydispersity is expected to have a significant influence on the processing behavior of such materials.

关键词： Polyamide-6 Random branching Statistical composition Rheology monte Carlo Tube theory.

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Particle Size Distribution and Characterization of High Siliceous and microporous materials

引用

journal of materials Science & Technology 2005年第4期21卷 563-570页

作者： S.KDurrani j.Akhtar m.Ahmad m.j.moughal Nuclear materials Division Pakistan Institute of Nuclear Science and Technology P.O. Nilore Islamabad PakistanNuclear Materials Division Pakistan Institute of Nuclear Science and Technology P.O. Nilore Islamabad PakistanNuclear Physics Divisions Pakistan Institute of Nuclear Science and Technology P.O. Nilore Islamaad PakistanNuclear Materials Division Pakistan Institute of Nuclear Science and Technology P.O. Nilore. Islamabad. Pakistan

Particle size, textural and surface characteristics influence some major technological properties of high siliceous aluminosilicate zeolite and sillicoaluminophosphate （SAPO） microporous materials. A comparative study was furnished for measuring surface characteristics, particle size and particle size distribution using particle size analyzer （PSA） and scanning electron microscope （SEm）. The PSA is capable of measuring particle diameter in micron range. The results of these techniques for estimation of particle size were compared and correlated statistically. Student t-test and variance ratio test （F-test） methods were performed for the significance of results by the analysis of variance （ANONA） and multiple-range tests. Textural and surface characteristics were evaluated by Brunauer, Emmett ＆ Teller （BET） volumetric technique and v-αs plotting method. The textural results shows that the external surface area and micropore volume of microporous materials were higher than those of the high siliceous zeolites and its zeotype materials.

关键词： Synthesis High siliceous zeolites microporous materials Particle size distribution micropore volume SEm

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

DIFFERENTIAL OPERATORS OF INFINITE ORDER IN THE SPACE OF RAPIDLY DECREASING SEQUENCES

引用

Acta mathematica Scientia 2016年第2期36卷 325-333页

作者： m.mALDONADO j.PRADA m.j.SENOSIAIN Department of mathematics Salamanca University

We consider the space of rapidly decreasing sequences s and the derivative operator D defined on it. The object of this article is to study the equivalence of a differential operator of infinite order; that is φ（D） =^∞∑k=0φkD^k.φk constant numbers an a power of ***, meaning, is there a isomorphism X （from s onto s） such that Xφ（D） = D^nX？. We prove that if φ（D） is equivalent to Dn, then φ（D） is of finite order, in fact a polynomial of degree n. The question of the equivalence of two differential operators of finite order in the space s is addressed too and solved completely when n = 1.

关键词： Ordinary differential operators sequence spaces operators on function spaces

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

STABLE AND UNSTABLE STATIONARY TRAjECTORIES

引用

Applied mathematics and mechanics(English Edition) 2005年第1期26卷 52-57页

作者： j.m.Soriano Departamento de Anlisis matemtico Facultad de MatemticasUniversidad de Sevilla Aptdo.1160 Sevilla 41808 Spain

The stability of stationary trajectories of a particular autonomous system is *** proof of the result is based upon continuation methods.

关键词： autonomous system continuation method trajectory critical point zero point stationary trajectory stable solution asymptotically stable

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：