检索结果-南通市图书馆

Investigation of material composition,design,and performance of open-graded asphalt mixtures for semi-flexible pavement:A comprehensive experimental study

引用

Journal of Traffic and Transportation Engineering(English Edition) 2024年第1期11卷 92-116页

作者： mohammad Taghipoor Abolfazl Hassani mohammad m.Karimi Department of Civil and Environmental Engineering Tarbiat Modares UniversityTehranIran

The primary goal of this study is the design and construction of semi-flexible pavement(SFP)mixture in accordance with the engineering and mechanical *** study involves the use of a range of gradation curves,air void contents,cellulose and synthesized fibers,and neat and modified asphalt binders to prepare the open-graded asphalt(OGA)*** analyze the characteristics of these mixtures,a variety of test,namely binder drainage,semi-circular bending(SCB),Cantabro,wheel tracking,indirect tensile strength(ITS),and permeability tests were ***,to analyze the prepared grouting material,flexural strength,compressive strength,and fluidity tests were *** the final stage,SFP was compared to HmA in terms of engineering characteristics and *** to the results,SFP was more resistant to skid,rutting,fire,and moisture damage,while HmA had a better performance in fracture tests,including SCB *** to the results of the mechanical performance tests conducted on OGA mixtures,the highest and lowest values for air void content to achieve the highest mechanical performance level were 30%-35%and 25%,***,based on the laboratory results,it was determined that the required void ratio for constructing OGA mixtures was 24%-26%based on the bitumen type and fibers amount in the ***,SFP mixture can be regarded as a viable alternative to common pavements thanks to its high resistance to rutting and moisture damage,long freezing-thawing fatigue life,and adequate fire and skid resistance.

关键词： Semi-flexible pavement mixture Open-graded asphalt mixture Engineering properties Cantabro test Hot mix asphalt

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Distribution, health and ecological risk assessments of trace elements in Nigerian oil sands

引用

Acta Geochimica 2024年第1期43卷 59-71页

作者： Odunayo T.Ore Festus m.Adebiyi Department of Chemistry Obafemi Awolowo UniversityIle-Ife 220005Nigeria Department of Chemical Sciences Achievers UniversityOwoNigeria

The Nigerian oil sands represent the largest oil sand deposit in Africa, yet there is little published information on the distribution and potential health and ecological risks of trace elements in the oil resource. In the present study, we investigated the distribution pattern of 18trace elements(including biophile and chalcophile elements) as well as the estimated risks associated with exposure to these elements. The results of the study indicated that Fe was the most abundant element, with a mean concentration of 22,131 mg/kg while Br had the lowest mean concentration of 48 mg/kg. The high occurrence of Fe and Ti suggested a possible occurrence of ilmenite(Fe TiO_(3)) in the oil sands. Source apportionment using positive matrix factorization showed that the possible sources of detected elements in the oil sands were geogenic, metal production, and crustal. The contamination factor, geo-accumulation index, modified degree of contamination, pollution load index, and Nemerow pollution index indicated that the oil sands are heavily polluted by the elements. Health risk assessment showed that children were relatively more susceptible to the potentially toxic elements in the oil sands principally via ingestion exposure route(HQ > 1E-04). Cancer risks from inhalation are unlikely due to CR mal contact pose severe risks(CR > 1E-04). The high concentrations of the elements pose serious threats due to the potential for atmospheric transport, bioaccessibility, and bioavailability.

关键词： Biophile Chalcophile Oil sand Risk assessment Trace element

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Biotransformation of 6:2 fluorotelomer sulfonate(6:2 FTS)in sulfur-rich media by Trametopsis cervina

引用

Frontiers of Environmental Science & Engineering 2024年第9期18卷 17-26页

作者： Felix Grimberg Thomas m Holsen Sujan Fernando Siwen Wang Department of Civil and Environmental Engineering Clarkson UniversityPotsdamNew York 13699USA

Biotransformation of 6:2 fluorotelomer sulfonate(6:2 FTS)by two species of white-rot fungi,Pleurotus ostreatus(***)and Trametopsis cervina(***),was investigated in a sulfurrich medium designed to stimulate production of lignin-degrading *** of 6:2 FTS was observed by *** over the study period of 30 d,but not by *** rates were comparable to those found in other studies investigating mixed culture degradation in nonsulfur limiting media,with approximately 50 mol%of applied 6:2 FTS removed after 30 *** transformation products were short-chain perfluorocarboxylic acids(PFCAs),including PFHxA(2.27 mol%),PFPeA(0.24 mol%),and PFBA(0.28 mol%).The main intermediate products include 5:2 sFTOH(16.3 mol%)and 5:3 FTCA(2.99 mol%),while 6:2 FTCA,6:2 FTuCA,and 5:2 ketone were also identified at low *** 60 mol%of detected products were assigned to the major pathway to 5:2 ketone,and 40 mol%were assigned to the minor pathway to 5:3 *** overall molar balance was found to decrease to 75 mol%by Day 30,however,was closed to near 95 mol%with a theoretical estimation for the volatile intermediates in the headspace,5:2 ketone and 5:2 *** different capabilities of the two white-rot fungal species for 6:2 FTS biotransformation in sulfur-rich media suggest that the enzyme processes of *** to de-sulfonate 6:2 FTS may be unrelated to sulfur metabolism.

关键词： White-rot fungus 6:2 fluorotelomer sulfonate(6:2 FTS) Biotransformation Sulfur-rich medium Intermediate products

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Emerging role of galectin 3 in neuroinflammation and neurodegeneration

引用

Neural Regeneration Research 2024年第9期19卷 2004-2009页

作者： Brian m.Lozinski Khanh Ta Yifei Dong Department of Clinical Neuroscience University of CalgaryCalgaryABCanada Deparment of Biochemistry Microbiology&ImmunologyUniversity of SaskatchewanSaskatoonSKCanada

Neuroinflammation and neurodegeneration are key processes that mediate the development and progression of neurological ***,the mechanisms modulating these processes in different diseases remain incompletely *** in single cell based multi-omic analyses have helped to identify distinct molecular signatures such as Lgals3 that is associated with neuroinflammation and neurodegeneration in the central nervous system(CNS).Lgals3 encodes galectin-3(Gal3),aβ-galactoside and glycan binding glycoprotein that is frequently upregulated by reactive microglia/macrophages in the CNS during various neurological *** Gal3 has previously been associated with non-CNS inflammatory and fibrotic diseases,recent studies highlight Gal3 as a prominent regulator of inflammation and neuroaxonal damage in the CNS during diseases such as multiple sclerosis,Alzheimer’s disease,and Parkinson’s *** this review,we summarize the pleiotropic functions of Gal3 and discuss evidence that demonstrates its detrimental role in neuroinflammation and neurodegeneration during different neurological *** also consider the challenges of translating preclinical observations into targeting Gal3 in the human CNS.

关键词： Alzheimer’s disease Galectin 3 microglia multiple sclerosis neurodegeneration neuroinflammation Parkinson’s disease therapeutics

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Substrate control in track registration and preservation:insights across the Triassic—Jurassic boundary in southern Africa

引用

Journal of Palaeogeography 2024年第2期13卷 351-371页

作者： Loyce mpangala miengah Abrahams Emese m.Bordy Department of Geological Sciences University of Cape TownCape TownSouth Africa

Tracks registration is influenced by the dynamic interplay between the pedal anatomy of the trackmaker,its behaviour,and the substrate conditions it interacts *** in substrate conditions,especially those linked to grain size and moisture content,often result in the most dramatic variations in track *** the upper Stormberg Group,main Karoo Basin of southern Africa,diverse trace fossils,primarily comprising Late Triassic—Early Jurassic dinosaur tracks,are *** studies have extensively documented individual ichnosites,investigating variations between sites over time,with recent studies suggesting that track abundance and anatomical fidelity increase *** the well-established link between substrate and track morphology,past studies have not specifically focused on substrate conditions,often emphasizing macro-sedimentary features ***,we examine the micro-sedimentary features of track-bearing units in the upper Stormberg Group using petrographic techniques to better understand the palaeosubstrate and its effect on fossil track registration and *** analysis revealed that very fine-grained sandstones and substrates modified by microbial activity tend to preserve tracks with greater abundance and/or higher anatomical ***,the prevalence of very fine-grained and microbially modified strata,and their associated track trends increases in younger stratigraphic *** the Triassic—Jurassic boundary in southern Africa,a boom in dinosaur track abundances is observed and credited to the proliferation of dinosaur populations during the Early *** findings,however,suggest that the observed local increase in track abundance(and anatomical fidelity)up-stratigraphy may be linked to substrate composition differences,which were ultimately controlled by large-scale changes in the palaeoenvironment from high-energy meandering fluvial to lower-energy aeolian-lacustrine settings in the L

关键词： Dinosaur tracks Footprint anatomical fidelity micro-sedimentary features Substrate conditions Track registration Palaeoenvironmental context

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Seismic response of deep circular tunnels subjected to S-waves:Axial bending

引用

Underground Space 2024年第4期17卷 267-279页

作者： Chatuphat Savigamin Antonio Bobet Osvaldo P.m.Vitali HR Engineering Services Inc.MedleyFL 33166United States Lyles School of Civil Engineering Purdue UniversityWest LafayetteIN 47907United States Department of Civil Environmentaland Construction EngineeringUniversity of Hawaii at ManoaHonoluluHI 96822United States

Ovaling deformation of circular tunnels has received great interest from the tunneling community because this mode of seismicinduced deformation is considered the most ***,there is growing evidence that other deformation modes can also be important and thus need to be considered in *** study presents a new analytical solution to estimate axial bending(snaking),a mode of deformation caused by S-waves impinging on a tunnel parallel to the tunnel *** solution is developed using the soilstructure interaction approach with the assumption that the interface between the ground and the tunnel lining is frictionless(fullslip).Full dynamic numerical simulations are conducted to verify the new full-slip solution,together with the existing no-slip *** of dynamic amplification are also explored for both full-slip and no-slip interface conditions by changing the wavelength(or frequency)of the seismic input motions.

关键词： Seismic response of tunnels Analytical solutions Soil-structure interaction Axial bending Snaking S-waves

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Pin-on-disc tribological characterization of single ingredients used in a brake pad friction material

引用

Friction 2024年第11期12卷 2576-2593页

作者： Davide CARLEVARIS Francesco VARRIALE Jens WAHLSTRÖm Cinzia mENAPACE Department of Industrial Engineering University of TrentoTrento 38123Italy Brembo S.p.A StezzanoBergamo 24040Italy Department of mechanical Engineering Sciences Lund UniversityLund 22100Sweden

Researchers have long been studying the effects of the modification of friction material compositions on their tribological *** models have also been developed,but they are of limited use in the design of new ***,this research aims to investigate the tribological behaviour of single ingredients in friction materials to develop a tribological *** dataset could then be used as a foundation for a cellular automaton(CA)predictive model,intended to be a tool for designing friction *** samples were almost entirely composed of four distinct friction material ingredients,and one sample composed of their mixture was successfully ***-on-disc(PoD)tribometer testing and scanning electron microscopy/energy-dispersive X-ray spectroscopy(SEm/EDXS)analysis were used for the tribological *** material showed distinct tribological properties and evolution of the contact surface features,and the synergistic effect of their mutual interaction was also demonstrated by their mixture.

关键词： disc brakes sliding contact wear behaviour scanning electron microscopy(SEm) modelling

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Hard yet tough and self-lubricating(CuNiTiNbCr)C_(x) high-entropy nanocomposite films:Effects of carbon content on structure and properties

引用

Journal of materials Science & Technology 2024年第6期173卷 20-30页

作者： Y.T.Li X.m.Chen X.K.Zeng m.Liu X.Jiang Y.X.Leng Key Laboratory of Advanced Technologies of materials Ministry of EducationSchool of Materials Science and EngineeringSouthwest Jiaotong UniversityChengdu 610031China Key Laboratory of Noise and Vibration Research Institute of AcousticsChinese Academy of SciencesBeijing 100190China State Key Laboratory of Acoustics Institute of AcousticsChinese Academy of SciencesBeijing 100190China School of mechanical and Electrical Engineering Mianyang Teachers’CollegeMianyang 621000China

The single-phase high-entropy alloy film is difficult to meet severe friction conditions due to its low hardness and high friction ***-composite structure film is composed of at least two separated phases,showing the properties of strength and toughness integration and excellent wear *** design of nanocomposite structures can effectively improve the mechanical properties and tribological properties of high-entropy alloy *** this study,the(CuNiTiNbCr)C_(x) nanocomposite high-entropy films(HEFs)integrated with high hardness,high toughness,and self-lubrication were synthesized by the double-target co-sputtering *** effect of carbon content on microstructure,mechanical properties,and tribological properties of(CuNiTiNbCr)C_(x) films was *** the increase of carbon content in the HEFs,the carbon atoms preferentially react with Ti,Nb,and Cr to form a(TiNbCr)C ceramic-reinforced phase,and then the excess carbon atoms precipitate in the form of amorphous carbon(a-C)lubricating phase in the *** structure of the HEFs changes from an amorphous structure to a nanocomposite structure of amorphous(amorphous CuNiTiNbCr phase+a-C phase)/nanocrystalline(TiN-bCr)C *** the carbon content is about 21.2 at.%,the carbide phase in the film reaches saturation and the hardness and modulus of the films are highest,which are 18 GPa and 228 GPa,*** HEFs with a carbon content of 44.0 at.%show the best toughness and tribological properties with a friction coefficient of 0.16 and a wear rate of 2.4×10^(-6) mm^(3)/(N m),which is mainly attributed to the excellent resistance to fatigue crack growth and the interfacial lubricating layer formed in the friction *** nanocomposite(CuNiTiNbCr)C_(x) HEFs show very promising application prospect in the field of friction protection.

关键词： High-entropy films Nanocomposite Double-target co-sputtering Strengthening-toughening Tribological properties

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Fire resistance evaluation through synthetic fire tests and generative adversarial networks

引用

Frontiers of Structural and Civil Engineering 2024年第4期18卷 587-614页

作者： Aybike Özyüksel Çiftçioğlu m.Z.Naser Department of Civil Engineering Manisa Celal Bayar University45140Türkiye School of Civil&Environmental Engineering and Earth Sciences(SCEEES) Clemson UniversityClemsonSC 29631USA Artificial Intelligence Research Institute for Science and Engineering(AIRISE) Clemson UniversityClemsonSC 29631USA

This paper introduces a machine learning approach to address the challenge of limited data resulting from costly and time-consuming fire experiments by enlarging small fire test data sets and predicting the fire resistance of reinforced concrete *** approach begins by creating deep learning models,namely generative adversarial networks and variational autoencoders,to learn the spatial distribution of real fire *** then use these models to generate synthetic tabular samples that closely resemble realistic fire resistance values for reinforced concrete *** generated data are employed to train state-of-the-art machine learning techniques,including Extreme Gradient Boost,Light Gradient Boosting machine,Categorical Boosting Algorithm,Support Vector Regression,Random Forest,Decision Tree,multiple Linear Regression,Polynomial Regression,Support Vector machine,Kernel Support Vector machine,Naive Bayes,and K-Nearest Neighbors,which can predict the fire resistance of the columns through regression and *** learning analyses achieved highly accurate predictions of fire resistance values,outperforming traditional models that relied solely on limited experimental *** study highlights the potential for using machine learning and deep learning analyses to revolutionize the field of structural engineering by improving the accuracy and efficiency of fire resistance evaluations while reducing the reliance on costly and time-consuming experiments.

关键词： deep learning fire resistance generative adversarial networks machine learning

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Analysis of synthetic parameters for coating aluminum powders with phenyltriethoxysilane coupling agent and their effects on powder flow behavior

引用

Particuology 2024年第7期90卷 412-417页

作者： Lillian m.mawby Bellamarie Ludwig Benjamin J.Lear Department of Chemistry The Pennsylvania State UniversityUniversity ParkPA16802USA Applied Research Laboratory The Pennsylvania State UniversityUniversity ParkPA16802USA

Though silanization of aluminum powder is currently used to improve its flow properties,for use as an alternative fuel source,there are a wide range of experimental parameters for the process and not all of them have been thoroughly *** this is complete,it is unknown if the process is optimized in terms of time,efficiency,and ***,we report on a study into the effects of changes in humidity,degree of agitation,reaction temperature,and curing time upon the deposition of phenyl triethoxysilane into 20μm(d50)aluminum *** confirm the deposition of the coating via diffuse reflectance infrared spectroscopy and x-ray photoelectron *** then characterize the coated particles using apparent density measurements and Carney flow *** analysis of variance,we find that,of the parameters explored,only changes in cure time and reaction temperature provide meaningful changes to the apparent density,while none of our parameters produced statistically significant changes in Carney flow ***,we conclude that,when optimizing silanization of aluminum particles,environmental control of humidity is unneeded and that the reaction can be run with minimal *** ability to largely ignore these parameters is a benefit to large-scale processing.

关键词： Aluminum powder Silane Fluidization Apparent density Carney flow

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：