检索结果-南通市图书馆

Preparation of Environmentally Friendly Urea-Hexanediamine-Glyoxal(HUG)Resin Wood Adhesive

在线全文

学校读者我要写书评

暂无评论

Journal of Renewable Materials 2024年第2期12卷 235-244页

作者： Qianyu Zhang Shi Chen long cao Hong Lei Antonio Pizzi Xuedong Xi Guanben Du Yunnan Key Laboratory of Wood Adhesives and Glue Products College of Material Science and EngineeringSouthwest Forestry UniversityKunming650224China International Joint Research Center for Biomass Materials Southwest Forestry UniversityKunming650224China College of Chemical and Materials Engineering Zhejiang A&F UniversityHangzhou311300China LERMAB University of LorraineEpinal88000France

Using non-toxic,low-volatile glyoxal to completely replace formaldehyde for preparing urea-glyoxal(UG)resin adhesive is a hot research topic that could be of great interest for the wood ***,urea-glyoxal(UG)resins prepared by just using glyoxal instead of formaldehyde usually yields a lower degree of *** results in a poorer bonding performance and water resistance of UG resins.A good solution is to pre-react urea to preform polyurea molecules presenting already a certain degree of polymerization,and then to condense these with glyoxal to obtain a novel UG ***,in this present work,the urea was reacted with hexamethylene diamine to form a polyurea named HU,and then this was used to react it with different amounts of glyoxal to synthesize hexamethylenediamine-urea-glyoxal(HUG)polycondensation resins,and to use this for bonding *** results show that the glyoxal can well react with HU polyuria via addition and schiff base reaction,and also the HUG resin exhibits excellent bonding strength and water *** shear strength of the plywood bonded with this HUG at 160°C hot press temperature as high as 1.93 MPa,2.16 MPa and 1.61 MPa,respectively,which meets the requirement of the China national standard GB/T 9846-2015(≥0.7 MPa),and can be a good choice as a wood adhesive for industrial application.

关键词： Urea-glyoxal resin hexamethylene diamine wood adhesives water resistance

Ultrathin polyimide-based composites with efficient low-reflectivity electromagnetic shielding and infrared stealth performance

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano Research 2024年第7期17卷 6700-6712页

作者： Xu Zhao Xinwei Tang Yunlong qiao Shuangshuang Li Zihang Zhang Yezi Lu Mingyang Zhu Zaiyin Hu Lijuan long Zicheng Wang Tianxi Liu The Key Laboratory of Synthetic and Biological Colloids Ministry of EducationSchool of Chemical and Material EngineeringInternational Joint Research Laboratory for Nano Energy CompositesJiangnan UniversityWuxi 214122China Guizhou Aerospace Wujiang Electro-mechanical Equipment Co. Ltd.No.20-5Dalian Road Aerospace Industrial ParkHuichuan DistrictZunyi 563000China School of Materials and Architectural Engineering Guizhou Normal UniversityGuiyang 550025China

Researching and manufacturing materials that possess both electromagnetic interference(EMI)shielding and infrared stealth capabilities is of great ***,an ultrathin polyimide-based nonwoven fabric with low-reflection EMI shielding/infrared stealth performance is successfully fabricated by in-situ loading of Fe_(3)O_(4)/Ag nanoparticles on the surface of polyimide(PI)fiber(PFA),and followed by bonding with a commercial Cu/Ni *** synergistic assembly of PFA and Cu/Ni promotes the rational construction of hierarchical impedance matching,inducing electromagnetic waves(EMW)to enter the composite and be dissipated as much as ***,the existence of Cu/Ni mesh on back of PFA facilitates the formation of electromagnetic resonance and destructive interference of EMW reflected from composite,leading to a lowerreflectivity(0.26)EMI shielding performance of 58 dB within 24–40 GHz at a thinner thickness(430μm).More importantly,the fluffy PFA nonwoven fabric and metal Cu/Ni mesh endow composite with good thermal insulation and low infrared emissivity,resulting in excellent infrared stealth performance in various *** a result,such excellent compatibility makes it possible to become a promising defense material to be applied in military tent for preventing electromagnetic and infrared radiation.

关键词： polyimide electromagnetic interference shielding low reflection infrared stealth

Late Cenozoic uplift of the Liupan Mountains:Evidence from the Neogene loess deposits

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China Earth Sciences 2024年第5期67卷 1480-1488页

作者： Zhilin HE Yansong qiao Zhengtang GUO Chaoqin CHEN long CHEN Yang FU Ye YANG Yanxia LIANG Xinru LIN Guoqiao XIAO Tao ZHAN Key Laboratory of Cenozoic Geology and Environment Institute of Geology and GeophysicsChinese Academy of SciencesBeijing 100029China Institute of Geomechanics Chinese Academy of Geological SciencesBeijing 100081China CAS Center for Excellence in Life and Paleoenvironment Beijing 100044China University of Chinese Academy of Sciences Beijing 100049China Institute of Ecological Geology Survey and Research of Heilongjiang Province Harbin 150030China School of Geography and Information Engineering China University of GeosciencesWuhan 430078China School of Earth Sciences China University of GeosciencesWuhan 430074China Natural Resources Survey Institute of Heilongjiang Province Harbin 150036China

The Liupan Mountains,one of the important mountain ranges in western China,are located on the boundary between the northeastern Tibetan Plateau and the Ordos *** uplift history of the Liupan Mountains remains *** deposits are good tracers of regional tectonic and geomorphic changes,because loess is sensitive to erosion and the formation and preservation of loess requires relatively flat highlands and relatively stable tectonic *** investigated the distribution of Neogene loess deposits on the western piedmont of the Liupan Mountains and examined a near-continuous loess section(Nanping section)on the piedmont alluvial *** of magnetic susceptibility stratigraphy with the QA-ⅠMiocene loess sequence dates this 56-m section covering the interval from~8.1 to 6.2 *** lower boundary age of this section,together with previously reported Zhuanglang red clay(sand-gravel layers with intercalated loess during~9–8 Ma and near-continuous loess during~8–4.8 Ma)and Chaona red clay(~8.1–2.58 Ma),indicates that the Liupan Mountains were uplifted in the late Miocene(~9–8 Ma)and basically formed by~8 Ma,attesting to no intense mountain building since that *** addition,based on the information from the Zhuanglang core and the QA-Ⅰsection,we infer that sizable parts of the Liupan Mountains were uplifted during the late Oligocene–early Miocene and did not experience intense uplift during~22–9 Ma.

关键词： Liupan Mountains Mountain building Neogene Loess Chinese Loess Plateau Late Miocene Late Oligocene–early Miocene

A Dielectric Ink Combining Acrylate and Cyanate Moieties for Inkjet 3D Printing with Good Thermal Stability

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Polymer Science 2024年第6期42卷 766-774页

作者： Yi-Xuan Li Liang-Ying Wu Yan Yang Yao-Zhong Lu Zhong-Ying Ji Yu-Xiong Guo Xiao-long Wang qiao-Sheng Pu State Key Laboratory of Applied Organic Chemistry College of Chemistry and Chemical EngineeringLanzhou UniversityLanzhou730000China State Key Laboratory of Solid Lubrication Lanzhou Institute of Chemical PhysicsLanzhou730000China Lanzhou Traditional Chinese Medicine Hospital of Orthopedics and Traumatology Lanzhou730000China Shandong Laboratory of Advanced Materials and Green Manufacturing at Yantai Yantai Zhongke Research Institute of Advanced Materials and Green Chemical EngineeringYantai264006China

Inkjet 3D printing has potential in the additive manufacturing of electronic circuits and ***,inks that can be used for printing layers with T5%>300℃ or hardness>200 MPa have been rarely *** ester(CE)polymers have excellent thermal stability,high strength,and low shrinkage compared to other common dielectric inks for inkjet 3D printing,but cannot be quickly shaped by ultraviolet(UV)irradiation or thermal *** CEs with UV-curable monomers may be a possible way to accelerate crosslinking,but there are challenges from the adverse effects of the dilution of both *** this study,dielectric inks with acrylate and cyanate moieties were *** low viscosity and surface tension of the CE precursor(Bisphenol E cyanate ester)were combined with photocurable acrylate diluent monomers and cross-linker to realize an ink suitable for inkjet 3D *** internal dual three-dimensional cross-linked network structure resin was prepared by a combination of photocuring and thermal curing with T5%up to 326.69℃,hardness up to 431.84 MPa,dielectric constant of 2.70 at 8 GHz,and shrinkage of 1.64%.The developed dielectric inks can be applied to the 3D printing of printed circuit boards and other electronic devices that require dielectric properties.

关键词： Inkjet printing Cyanate ester resin 3D doubly cross-linked network Good thermal stability

Numerical Simulation of Wet Particles Motion in a Vertical Powder Dryer

在线全文

学校读者我要写书评

暂无评论

Fluid Dynamics & Materials Processing 2024年第8期20卷 1823-1846页

作者： long Yu Dongdong Pang Minmin She Hongwei Qiu Ping cao Xiongwei You School of Petrochemical Engineering Lanzhou University of TechnologyLanzhou730050China

In this study,the motion of wet particles in the drying unit of a vertical powder dryer is investigated by using a Discrete element method(DEM)coupled with a liquid bridge *** particular,by varying parameters such as the particle mass flow rates,the superficial gas velocities,and superficial gas temperatures,the influence of the moisture content on the flow behavior is *** results show that when the moisture content increases,the mean particle velocity decreases while the bed mean solid“holdup”and the mean residence time(MRT)of particles *** is also found that the local solid holdup is relatively higher in the near-wall region and decreases towards the near-fluid *** regression models are introduced accordingly for the mean particle velocity and the bed mean solid holdup by means of the RSM-BBD(Response surface methodology-Box-Behnken design)method to obtain the optimal combination of parameters for flooding ***,the optimal results are compared with numerical *** the relative error is less than 10%,this demonstrates that the proposed methodology can accurately describe the particle flow dynamics in the drying unit.

关键词： Counter-current gas-solid flow moisture content flow characteristics RSM-BBD

Ultrahard X-ray multifunctional application beamline at the SSRF

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nuclear Science and Techniques 2024年第6期35卷 14-25页

作者： Ke Yang Zhao-Hui Dong Chun-Yin Zhou Zi-long Zhao Dong-Xu Liang Sai-Chao cao Ai-Guo Li Shanghai Advanced Research Institute Chinese Academy of SciencesShanghai 201210China

The ultrahard X-ray multifunctional application beamline(BL12SW)is a phase-II beamline project at the Shanghai Syn-chrotron Radiation *** primary X-ray techniques used at the beamline are high-energy X-ray diffraction and imaging using white and monochromatic *** main scientific objectives of ultrahard X-ray beamlines are focused on two research *** is the study of the structural properties of Earth’s interior and new materials under extreme high-temperature and high-pressure conditions,and the other is the characterization of materials and processes in near-real service *** beamline utilizes a superconducting wiggler as the light source,with two diamond windows and SiC discs to filter out low-energy light(primarily below 30 keV)and a Cu filter assembly to control the thermal load entering the subsequent optical *** beamline is equipped with dual *** first was a meridional bending Laue monochromator cooled by liquid nitrogen,achieving a full-energy coverage of 30-162 *** second was a sagittal bending Laue monochromator installed in an external building,providing a focused beam in the horizontal direction with an energy range of 60-120 *** were four experimental hutches:two large-volume press experimental hutches(LVP1 and LVP2)and two engineering material experimental hutches(ENG1 and ENG2).Each hutch was equipped with various near-real service conditions to satisfy different *** example,LVP1 and LVP2 were equipped with a 200-ton DDIA press and a 2000-ton dual-mode(DDIA and Kawai)press,***1 and ENG2 provide in situ tensile,creep,and fatigue tests as well as high-temperature *** June 2023,the BL12SW has been in trial *** is expected to officially open to users by early 2024.

关键词： Shanghai Synchrotron Radiation Facility Ultrahard X-ray High energy diffraction High energy imaging Engineering materials Earth science

Cation-doped LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2) cathode with high rate performance

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Chemical Engineering 2024年第6期70卷 139-148页

作者： long Zhang Dongsheng Yang Lilei Miao Chunmeng Zhang Jiexiang Li Jiawei Wen Chunxia Wang Tiantian cao Guoyong Huang Shengming Xu College of New Energy and Materials China University of PetroleumBeijing 102249China State Key Laboratory of Heavy Oil Processing College of Chemical EngineeringChina University of PetroleumBeijing 102249China Beijing Spacecrafts Beijing 100094China SINOPEC Sales Co. Ltd.Beijing 100728China SINOPEC Research Institute of Petroleum Processing Co. LtdBeijing 100083China Institute of Nuclear and New Energy Technology Tsinghua UniversityBeijing 100084China Beijing Key Laboratary of Fine Ceramics Tsinghua UniversityBeijing 100084China

The nickel-rich layered cathode material LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)(NCM811)has high energy density,lower cost and is a promising cathode material currently under ***,its electrochemical and structural stability is poor during *** the many modification methods,cation doping has been consistently proven to be an effective strategy for enhancing electrochemical ***,the NCM811 cathode material was modified by solid-phase reactions with Mg and Al *** addition,the corresponding mechanism of NCM811 cathode material-doped modification is explored by density functional theory(DFT)calculations,and we have extended this approach to other ternary cathode materials with different ratios and obtained universal *** with DFT calculations,the results show that Mg2+occupies the Li+site and reduces the degree of Li^(+)/Ni^(2+) mixture;Al^(3+) acts as a structural support during charging and discharging to prevent structural *** electrochemical properties were tested by an electrochemical workstation and the LAND system,and the results showed that the capacity retention rate increased to varying degrees from 63.66%to 69.87%and 89.05%for NCM811-Mg and NCM811-Al at room temperature after 300 cycles,*** study provides a theoretical basis and design strategy for commercializing cationic-doped modification of nickel-rich cathode materials.

关键词： Li-ion batteries Cathode materials Doped Electrochemical properties DFT calculation

Covering corneal stromal lenticule for macular hole in pathological myopia

在线全文

学校读者我要写书评

暂无评论

International Journal of Ophthalmology(English edition) 2024年第9期17卷 1675-1680页

作者： Zi-Yan Tang Gang qiao Xiao-Juan Zhang Li-Jun Xie Qiang-Xing Zou Chun-Mei He long Zhao Hua-Qing Yang Yu Quan Kui cao Hui Jiang Yu-Kun He Wanjiang Eye Hospital of Mianyang Mianyang 621000Sichuan ProvinceChina

AIM:To evaluate the clinical effect of a new surgery technique(covering corneal stromal lenticule,CSL)for macular hole(MH)in pathological ***:This was a prospective non-randomized series case *** eyes of 14 patients whose axial length were more than 29 mm and suffered from MH and macular hole retinal detachment(MHRD)were included in this *** cases were treated with 25-gauge pars plana vitrectomy(PPV)with internal limiting membrane(ILM)peeling,covering CSL and C_(3)F_(8) gas *** cases were followed for 6mo,and the best-corrected visual acuity(BCVA),healing status of MH,the reattached rate of retinal detachment(RD),and reoperation rate were ***:All cases were successfully performed the surgery and the postoperative follow-up was *** surgery,MHs were healed in all 14 eyes(100%,14/14)after assessed by optical coherence *** reattachment of retina was achieved in all 6 eyes(100%,6/6)with *** was improved in 12 eyes(85.71%,12/14),and had no significant change in 2 eyes(14.29%,2/14).The overall mean BCVA was improved from 1.80±0.77 to 0.82±0.46 logMAR(F=10.46,P<0.01).No serious complications occurred in all ***:The new surgery technique(covering CSL)has high reattached rate of RD and high healing rate of MH in pathological myopia in the preliminary *** it can effectively improve the visual function of *** new technique offers meaningful new ideas for treating refractory MH in pathological myopia.

关键词： corneal stromal lenticule macular hole pathological myopia

Extending the solid solution range of sodium ferric pyrophosphate:Off‐stoichiometric Na_(3)Fe(2.5)(P_(2)O_(7))_(2)as a novel cathode for sodium‐ion batteries

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Carbon Energy 2024年第4期6卷 128-139页

作者： Xiang jun Pu Kunran Yang Zibing Pan Chunhua Song Yangyang Lai Renjie Li Zheng‐long Xu Zhongxue Chen Yuliang cao Hubei Key Laboratory of Electrochemical Power Sources College of Chemistry and Molecular SciencesWuhan UniversityWuhanChina Key Laboratory of Hydraulic Machinery Transients Ministry of EducationSchool of Power and Mechanical EngineeringWuhan UniversityWuhanChina School of Chemistry and Chemical Engineering Jiangsu University of TechnologyChangzhouJiangsuChina Zonergy Corporation ZigongSichuanChina Department of Industrial and Systems Engineering The Hong Kong Polytechnic UniversityHung HomHong Kong SARChina

Iron‐based pyrophosphates are attractive cathodes for sodium‐ion batteries due to their large framework,cost‐effectiveness,and high energy ***,the understanding of the crystal structure is scarce and only a limited candidates have been reported so *** this work,we found for the first time that a continuous solid solution,Na_(4−α)Fe_(2+α)_(2)(P_(2)O_(7))_(2)(0≤α≤1,could be obtained by mutual substitution of cations at center‐symmetric Na3 and Na4 sites while keeping the crystal building blocks of anionic P_(2)O_(7) *** particular,a novel off‐stoichiometric Na_(3)Fe(2.5)(P_(2)O_(7))_(2)is thus proposed,and its structure,energy storage mechanism,and electrochemical performance are extensively investigated to unveil the structure–function *** as‐prepared off‐stoichiometric electrode delivers appealing performance with a reversible discharge capacity of 83 mAh g^(−1),a working voltage of 2.9 V(***^(+)/Na),the retention of 89.2%of the initial capacity after 500 cycles,and enhanced rate capability of 51 mAh g^(−1)at a current density of 1600 mA g^(−1).This research shows that sodium ferric pyrophosphate could form extended solid solution composition and promising phase is concealed in the range of Na_(4−α)Fe_(2+α)_(2)(P_(2)O_(7))_(2),offering more chances for exploration of new cathode materials for the construction of high‐performance SIBs.

关键词： extending solid‐solution range off‐stoichiometric Na_(3)Fe_(2.5)(P_(2)O_(7))_(2) sodium‐ion batteries structure-function relationship