检索结果-南通市图书馆

Highly Defective Dark Tio_(2) Modified with Pt: Effects of Precursor Nature and Preparation Method on Photocatalytic Properties

引用

Transactions of Tianjin University 2024年第2期30卷 198-209页

作者： E.D.Fakhrutdinova o.A.Reutova T.A.bugrova i.Yu.ovsyuk L.S.Kibis o.A.Stonkus D.b.Vasilchenko o.V.Vodyankina V.A.Svetlychnyi National Research Tomsk State University TomskRussia 634050 Novosibirsk State University NovosibirskRussia 630090 boreskov institute of Catalysis NovosibirskRussia 630090 Nikolaev institute of inorganic Chemistry NovosibirskRussia 630090

The study focused on the modification with platinum of dark defective titania obtained via pulsed laser ablation. both the method of Pt introduction and the nature of the Pt precursor were varied. All samples exhibited similar phase compositions, specific surface areas, and Pt contents. High-resolution transmission electron microscopy coupled with pulsed Co adsorption revealed increased dispersity when photoreduction and the hydroxonitrate complex (Me _(4) N) _(2) [Pt _(2) (oH) _(2) (No _(3) ) _(8) ] were used. The sample featured a high content of single-atom species and subnano-sized Pt clusters. The X-ray photoelectron spectroscopy results showed that the photoreduction method facilitated the appearance of a larger number of Pt ^(2+) states, which appeared owing to the strong metal-support interaction (SMSi) eff ect of the transfer of electron density from the electron-saturated defects on the Tio _(2) surface to Pt ^(4+) . in the hydrogen evolution reaction, samples with a significant fraction of the Pt ^(2+) ionic component, capable of generating short-lived Pt^(0) single-atom sites under irradiation due to the SMSi eff ect, exhibited the highest photocatalytic activity. The 0.5Pt(C)/Tio_(2) -Ph sample exhibited the highest hydrogen yield with a quantum efficiency of 0.53, retaining its activity even after 8 h of operation.

关键词： Dark(black)Tio_(2) Pulsed laser ablation Platinum reduction method Precursor type Photocatalysis Hydrogen evolution reaction

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Neuroinflammation revisited through the microglial lens

引用

Neural Regeneration Research 2025年第7期20卷 1989-1990页

作者： Renato Socodato João b.Relvas institute of Research and innovation in Health(i3S)and institute for Molecular and Cell biology(ibMC) University of PortoPortoPortugal Department of biomedicine Faculty of Medicine of the University of Porto(FMUP)PortoPortugal

Neuroimmunology is emerging as a pivotal field,shedding light on the intricate dialogues between the central nervous system(CNS)and the immune *** exploration is particularly significant in understanding microglia,the CNS’s innate immune cells,beyond the conventional conflation of“neuroinflammation”and“microglial activation.”This conflation has clouded the true complexity of these processes,potentially stalling scientific progress and the development of new *** challenge the long-standing perspectives that have oversimplified these interactions,advocating for a deeper exploration of the dynamic relationship between neuroinflammation and microglial *** dissecting specific molecular pathways,we aim to illuminate their elaborate roles in neuroinflammatory responses,especially in the context of Alzheimer’s disease(AD).Here,neuroinflammation is not merely a passive observer or a direct antagonist but a complex agent in the disease’s *** article calls for a significant paradigm shift towards an integrative,multi-omics approach to *** such a comprehensive framework is crucial for advancing our understanding of neuroinflammatory conditions and paving the way for targeted therapeutic strategies for brain diseases.

关键词： inflammation simplified activation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Prompt neutron emission in ^(250)No spontaneous fission associated with ground and isomeric state decays

引用

Chinese Physics C 2024年第6期48卷 112-117页

作者： R.S.Mukhin A.V.isaev A.V.Andreev M.L.Chelnokov V.i.Chepigin H.M.Devaraja i.N.izosimov A.A.Kuznetsova o.N.Malyshev A.G.Popeko Yu.A.Popov A.Rahmatinejad b.Sailaubekov T.M.Shneidman E.A.Sokol A.i.Svirikhin M.S.Tezekbayeva M.A.bychkov A.V.Yeremin o.Dorvaux b.Gall K.Kessaci K.Hauschild A.Lopez-Martens Joint institute for Nuclear Research Dubna141980Russia Dubna State University Dubna141982Russia institute of Nuclear Physics Almaty050032Kazakhstan L.N.Gumilyov Eurasian National University Astana010008Kazakhstan Kazan Federal University Kazan420008Russia Universitéde Strasbourg CNRSStrasbourg67000France iJCLab IN2P3-CNRSUniversitéParis-SaclayOrsay91400France

The complete-fusion reaction^(204)Pb(^(48)Ca,2n)^(250)No was used to study two activities of^(250)No with distinct half-lives.A total of 1357 events were observed in the SFiNx neutron detection *** average number of neutrons emitted per spontaneous fission of^(250)No was determined to be(4.1±0.1).The unusually symmetrical shape of the prompt neutron multiplicity distribution was restored and presented for the first *** tests were performed to compare the prompt neutron multiplicity distributions associated with the ground state and K-isomer state decays.

关键词： spontaneous fission prompt neutrons actinide

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A facile strategy for tuning the density of surface-grafted biomolecules for melt extrusion-based additive manufacturing applications

引用

bio-Design and Manufacturing 2024年第3期7卷 277-291页

作者： i.A.o.beeren G.Dos Santos P.J.Dijkstra C.Mota J.bauer H.Ferreira Rui L.Reis N.Neves S.Camarero-Espinosa M.b.baker L.Moroni Department of Complex Tissue Regeneration MERLN Institute for Technology-Inspired Regenerative MedicineMaastricht University6229 ER MaastrichtThe Netherlands 3b’s Research Group I3Bs–Research Institute on BiomaterialsBiodegradables and BiomimeticsHeadquarters of the European Institute of Excellence on Tissue Engineering and Regenerative MedicineUniversity of MinhoAveParkZona Industrial da Gandra4805-017 BarcoGuimarãesPortugal iCVS/3b’s-PT Government Associate Laboratory 4806-909 Braga/GuimarãesPortugal PoLYMAT University of the Basque Country UPV/EHU20018 Donostia/San SebastiánSpain iKERbASQUE Basque Foundation for Science48009 BilbaoSpain

Melt extrusion-based additive manufacturing(ME-AM)is a promising technique to fabricate porous scaffolds for tissue engi-neering ***,most synthetic semicrystalline polymers do not possess the intrinsic biological activity required to control cell *** of biomolecules on polymeric surfaces of AM scaffolds enhances the bioactivity of a construct;however,there are limited strategies available to control the surface ***,we report a strategy to tune the surface density of bioactive groups by blending a low molecular weight poly(ε-caprolactone)5k(PCL5k)containing orthogonally reactive azide groups with an unfunctionalized high molecular weight PCL75k at different *** porous three-dimensional(3D)scaf-folds were then fabricated using a high weight percentage(75 wt.%)of the low molecular weight PCL *** a proof-of-concept test,we prepared films of three different mass ratios of low and high molecular weight polymers with a thermopress and reacted with an alkynated fluorescent model compound on the surface,yielding a density of 201-561 pmol/cm^(2).Subsequently,a bone morphogenetic protein 2(bMP-2)-derived peptide was grafted onto the films comprising different blend compositions,and the effect of peptide surface density on the osteogenic differentiation of human mesenchymal stromal cells(hMSCs)was *** two weeks of culturing in a basic medium,cells expressed higher levels of bMP receptor ii.b.PRii)on films with the conjugated *** addition,we found that alkaline phosphatase activity was only significantly enhanced on films contain-ing the highest peptide density(i.e.,561 pmol/cm^(2)),indicating the importance of the surface *** together,these results emphasize that the density of surface peptides on cell differentiation must be considered at the cell-material ***,we have presented a vi.b.e strategy for ME-AM community that desires to tune the bulk and surface functionality via blending of(m

关键词： Additive manufacturing blending Surface functionalization Surface density Click chemistry Human

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

biofabrication of nanocomposite-based scaffolds containing human bone extracellularmatrix for the differentiation of skeletal stem and progenitor cells

引用

bio-Design and Manufacturing 2024年第2期7卷 121-136页

作者： Yang-Hee Kim Janos M.Kanczler Stuart Lanham Andrew Rawlings Marta Roldo Gianluca Tozzi Jonathan i.Dawson Gianluca Cidonio Richard o.C.oreffo Faculty of Medicine Bone and Joint Research GroupCentre for Human DevelopmentStem Cells and RegenerationInstitute of Developmental SciencesUniversity of SouthamptonSouthampton SO166YDUK School of Pharmacy and biomedical Science University of PortsmouthPortsmouth PO12DTUK School of Engineering Faculty of Engineering and ScienceUniversity of GreenwichGreenwich ME44TBUK Center for Life Nano-and Neuro-Science(CLN2S) Italian Institute of Technology00161 RomeItaly

Autograft or metal implants are routinely used in skeletal ***,they fail to provide long-term clinical resolution,necessitating a functional biomimetic tissue engineering *** use of native human bone tissue for synthesizing a biomimeticmaterial inkfor three-dimensional(3D)bioprintingof skeletal tissueis anattractivestrategyfor ***,human bone extracellular matrix(bone-ECM)offers an exciting potential for the development of an appropriate microenvironment for human bone marrow stromal cells(HbMSCs)to proliferate and differentiate along the osteogenic *** this study,we engineered a novel material ink(LAb)by blending human bone-ECM(b)with nanoclay(L,Laponite®)and alginate(A)polymers using extrusion-based *** inclusion of the nanoﬁller and polymeric material increased the rheology,printability,and drug retention properties and,critically,the preservation of HbMSCs vi.b.lity upon *** composite of human bone-ECM-based 3D constructs containing vascular endothelial growth factor(VEGF)enhanced vascularization after implantation in an ex vivo chick chorioallantoic membrane(CAM)*** inclusion of bone morphogenetic protein-2(bMP-2)with the HbMSCs further enhanced vascularization and mineralization after only seven *** study demonstrates the synergistic combination of nanoclay with biomimetic materials(alginate and bone-ECM)to support the formation of osteogenic tissue both in vitro and ex vivo and offers a promising novel 3D bioprinting approach to personalized skeletal tissue repair.

关键词： Extracellular matrix Nanoclay bone 3D bioprinting

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Catalytic co-combustion of biomass and brown coal in a fluidized bed:Economic and environmental benefits

引用

Journal of Environmental Sciences 2024年第6期140卷 24-36页

作者： Yury V.Dubinin Nikolay A.Yazykov Petr M.Yeletsky Roman b.Tabakaev Aleksandra i.b.lyanovskaya Vadim A.Yakovlev Federal Research Center boreskov institute of Catalysis Sb RAS Lavrentiev Ave.5Novosibirsk630090Russia University of Tyumen Volodarskogo str.6Tyumen625003Russia

The work is devoted to the study of combustion of brown coal,pine sawdust,and their mixtures in a fluidized bed of catalyst at 600-750℃.it is shown that an increase in the content of sawdust in a mixture with brown coal leads to an increase in the burnout degree of solid fuel from 94.4%to 99.9%,while the emission of greenhouse gases in the form of Co_(2)Co and Noxis reduced(Co_(2)from the biomass is not included in the balance).The high content of alkaline earth metal oxides(Cao and Mgo)in the mineral part of brown coal,sawdust,and their mixtures eliminates the emission of sulfur oxides and the slagging of heat-exchange surfaces during the combustion in a fluidized bed of *** optimal temperature,when the highest burnout degree of the above fuels is achieved in the combustion is 750℃.it is also shown that the increase in temperature and the content of sawdust in the composition of the fuel mixtures has a positive effect on the economic and environmental process indicators.

关键词： Co-combustion Fluidized catalyst bed biomass Coal Economic effect Environmental impact

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Generalized time-dependent generator coordinate method for induced fission dynamics

引用

Frontiers of physics 2024年第4期19卷 1-12页

作者： b.Li D.Vretenar T.Nikšić J.Zhao P.W.Zhao J.Meng State Key Laboratory of Nuclear Physics and Technology School of PhysicsPeking UniversityBeijing 100871China Physics Department Faculty of ScienceUniversity of Zagreb10000 ZagrebCroatia Center for Circuits and Systems Peng Cheng LaboratoryShenzhen 518055China

The generalized time-dependent generator coordinate method(TD-GCM)is extended to include pairing *** correlated GCM nuclear wave function is expressed in terms of time-dependent generator states and weight *** particle–hole channel of the effective interaction is determined by a Hamiltonian derived from an energy density functional,while pairing is treated dynamically in the standard bCS approximation with time-dependent pairing tensor and single-particle occupation *** the inclusion of pairing correlations,various time-dependent phenomena in open-shell nuclei can be described more *** model is applied to the description of saddle-to-scission dynamics of induced *** generalized TD-GCM charge yields and total kinetic energy distribution for the fission of 240Pu,are compared to those obtained using the standard time-dependent density functional theory(TD-DFT)approach,and with available data.

关键词： nuclear density functional theory generator coordinate method fission dynamics

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Microstructure， electrochemical， wear and corrosive wear performance of laser-based powder bed fusion(lpbf) and wrought biomedical Ti-6Al-4V alloys

引用

Transactions of Nonferrous Metals Society of China 2024年

作者： A.G.Lekatou b.V.Efremenko V.Haoui V.G.Efremenko S.Emmanouilidou V.i.Zurnadzhy i.Petryshynets Yu.G.Chabak i.i.Sili Laboratory of Applied Metallurgy Department of Materials Science and Engineering School of Engineering University of ioannina institute of Materials Science and Computing University Research Center of ioannina (URCi) Pryazovskyi State Technical University Department of Physics institute of Materials Research of Slovak Academy of Sciences

Wrought and laser powder bed fusion （LPbF） Ti-6Al-4V specimens were comparatively evaluated， with the objective to determine LPbF Ti-6-4’s suitability for biomedical applications. Testing included nanoindentation， cyclic polarization in simulated body fluid （SbF， 37 ℃ ）， and dry and SbF “ball-on-Plate” sliding. Wrought Ti-6-4 exhibited a lamellar （α+β） microstructure， whereas LPbF displayed a fine-grained α'-martensite microstructure. LPbF Ti-6-4 demonstrated ～3% higher indentation modulus and ～32% higher hardness， while wrought Ti-6-4 showed ～8% higher plasticity. both alloys exhibited low corrosion rates (10–5mA/cm2order) and true passivity (10–4mA/cm2order). No localized corrosion was observed in either alloy， except for occasional metastable pitting in the LPbF alloy. However， LPbF Ti-6-4 presented higher corrosion rate and passive current， ascribed to its martensitic structure. During dry sliding， LPbF Ti-6-4 exhibited ～14% lower volume loss compared to wrought Ti-6-4. Sliding in SbF increased volume losses for both alloys， with wear resistances nearly equalized， as the advantage of LPbF Ti-6-4 decreased due to more intensive wear-accelerated corrosion induced by the stressed martensite. overall， the results demonstrate the suitability of LPbF Ti-6Al-4V for biomedical uses.

关键词：

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Antibacterial HA-coatings on bioresorbable Mg alloy

引用

Journal of Magnesium and Alloys 2024年第5期12卷 1965-1985页

作者： K.V.Nadaraia D.V.Mashtalyar M.A.Piatkova A.i.Pleshkova i.M.imshinetskiy M.S.Gerasimenko E.A.belov V.V.Kumeiko D.N.Kozyrev K.A.Fomenko V.V.Mostovaya b.R.Torpanov A.R.biktimirov i.S.osmushko S.L.Sinebryukhov S.V.Gnedenkov institute of Chemistry FEb RAS 159 Pr.100-letiya VladivostokaVladivostok 690022Russia Far Eastern Federal University 10 Ajax BayRussky IslandVladivostok 690922Russia A.V.Zhirmunsky National Scientific Center of Marine biology FEb RAS 17 St.PalchevskogoVladivostok 690041Russia Regional Clinical Dermatovenerological Dispensary 18 V St.GamarnikaVladivostok 690033Russia NMiC“Treatment and Rehabilitation Center” 3 Ivankovskoe highwayMoscow 125367Russia

in this study,a calcium-phosphate coating was formed on a Mg-Mn-Ce alloy by the plasma electrolytic oxidation(PEo).The antibiotic vancomycin,widely used in the treatment of infections caused by Staphylococcus aureus(***),was impregnated into the *** with vancomycin showed high bactericidal activity against *** mechanical and electrochemical properties of the formed coatings were studied,as well as in vitro cytotoxicity tests and in vivo tests on mature male rats were *** to SEM,EDS,XRD and XPS data,coatings had a developed morphology and contained hydroxyapatite,which indicates high *** analysis of roughness of coatings without and with vancomycin did not reveal any differences,confirming the high roughness of the *** electrochemical tests,an increase in corrosion resistance by more than two times after the application of PEo coatings was *** to the results of an in vivo study,after 28 days of the implantation of samples with calcium phosphate PEo coating and vancomycin,no signs of inflammation were observed,while an inflammatory reaction developed in the area of implantation of bare alloy,followed by *** release tests from the coatings show a sharp decrease in the concentration of the released antibiotic on day 7 and then a gradual decrease until day *** the experiment,no significant deviations in the condition and behavior of the animals were observed;clinical tests did not reveal a systemic toxic reaction.

关键词： bioactive coatings biocompatibility Mg alloy Plasma electrolytic oxidation Hydroxyapatite Vancomycin

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

SANC Monte Carlo programs for small-angle bhabha scattering

引用

Chinese Physics C 2024年第4期48卷 14-19页

作者： A.b.Arbuzov S.G.bondarenko i.R.boyko L.V.Kalinovskaya A.A.Kampf R.R.Sadykov V.L.Yermolchyk bogoli.b.v Laboratory of Theoretical Physics JINRDubna141980 Russia Dzhelepov Laboratory of Nuclear Problems JINRDubna141980 Russia Dubna State University Dubna141982 Russia

Luminosity monitoring at e^(+)e^(−)colliders was investigated using SANC Monte Carlo event generator ReneSANCe and integrator MCSANC for simulation of bhabha scattering at low *** are presented for center-of-mass energies of the Z boson resonance and at 240 GeV for the conditions of typical luminosity *** is shown that bremsstrahlung events with extremely low electron scattering angles are relevant to match the precision tags of future electron-positron colliders.

关键词： luminosity bhabha scattering QED Monte Carlo simulation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：