检索结果-南通市图书馆

Track-before-detect for bistatic radar based on pseudo-spectrum

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2024年第1期37卷 236-246页

作者： Tao HAN Gongjian zhou School of Electronics and Information Engineering Harbin Institute of TechnologyHarbin 150001China Key Laboratory of Marine Environmental Monitoring and Information Processing Ministry of Industry and Information TechnologyHarbin 150001China

Track-Before-Detect(TBD) is an efficient method to detect dim targets for radars. Conventional TBD usually follows an approximate motion model of the target, which may cause an inaccurate integration of the target energy. A TBD technique on basis of pseudo-spectrum in mixed coordinates adopting an accurate motion model for bistatic radar system is developed in this *** predicted position in bistatic polar plane is derived according to a nonlinear function that exactly describes the constant Cartesian velocity motion. Then around the predicted position, a pseudo-spectrum is formulated and its samples are accumulated to the integration frame for energy integration. The evolution of the state and the procedure of accumulation of the target energy are derived elaborately. The superior performance of the proposed method is demonstrated by some simulations.

关键词： Weak target detection Bistatic radar Track-before-detect Pseudo-spectrum Multiframe integration

Effect of CO_(2) Opposing Multiple Jets on Thermoacoustic Instability and NO_(x) Emissions in a Lean-Premixed Model Combustor

在线全文

学校读者我要写书评

暂无评论

Journal of Thermal Science 2024年第1期33卷 207-221页

作者： zhou Hao HU Liubin Institute for Thermal Power Engineering State Key Laboratory of Clean Energy UtilizationZhejiang UniversityHangzhou 310027China

This paper experimentally studied the effect of CO_(2) opposing multiple jets on the thermoacoustic instability and NO_(x) emissions in a lean-premixed model *** feasibility was verified from three variables:the CO_(2) jet flow rate,hole numbers,and hole diameters of the *** indicate that the control effect of thermoacoustic instability and NO_x emissions show a reverse trend with the increase of open area ratio on the whole,and the optimal jet flow rate range is 1-4 L/min with CO_(2) opposing multiple *** this flow rate range,the amplitude and frequency of the dynamic pressure and heat release signals CH~* basically decrease as the CO_(2) flow rate increases,which avoids high-frequency and high-amplitude thermoacoustic *** amplitude-damped ratio of dynamic pressure and CH*can reach as high as 98.75% and 93.64% with an optimal open area ratio of 3.72%.NO_(x) emissions also decrease as the jet flow rate increases,and the maximum suppression ratio can reach 68.14%.Besides,the flame shape changes from a steep inverted "V" to a more flat "M",and the flame length will become shorter with CO_(2) opposing multiple *** research achieved the synchronous control of thermoacoustic instability and NO_(x) emissions,which could be a design reference for constructing a safer and cleaner combustor.

关键词： thermoacoustic instability lean-premixed model combustor CO_(2)opposing multiple jets open area ratio NO_(x)emissions

激光冲击强化对熔覆后TC4钛合金性能的提高

在线全文

学校读者我要写书评

暂无评论

江苏大学学报（自然科学版） 2013年第3期34卷 331-334页

作者：汪诚赖志林安志斌何卫锋周留成空军工程大学等离子体动力学重点实验室陕西西安710038

对TC4钛合金的熔覆试样进行激光冲击强化试验,比较了激光冲击强化前后试样的显微硬度、表面残余应力、显微组织和疲劳性能.TC4钛合金熔覆后,修复区表面残余拉应力为225 MPa,激光冲击强化消除了熔覆产生的拉应力,产生了449 MPa的残余压应... 详细信息

对TC4钛合金的熔覆试样进行激光冲击强化试验,比较了激光冲击强化前后试样的显微硬度、表面残余应力、显微组织和疲劳性能.TC4钛合金熔覆后,修复区表面残余拉应力为225 MPa,激光冲击强化消除了熔覆产生的拉应力,产生了449 MPa的残余压应力,在基体残留的压应力高达672 MPa;激光冲击强化后,修复区硬度由强化前的333 HV提高到381 ***显示:3次冲击后,在TC4材料表面形成了纳米晶层.对强化前后的激光熔覆试样进行高周疲劳试验,结果表明:激光冲击强化提高熔覆后钛合金疲劳强度达15.8%.经分析,冲击后细化晶粒和残余压应力对高周疲劳性能的提高起到了关键作用.

关键词： TC4钛合金激光冲击强化激光熔覆高周疲劳性能残余应力纳米晶层

Design of integral sliding mode guidance law based on disturbance observer

在线全文

学校读者我要写书评

暂无评论

Journal of Systems Engineering and Electronics 2024年第1期35卷 186-194页

作者： zhou Jianping ZHANG Wenjie zhou Hang LI Qiang XIA Qunli School of Aerospace Engineering Beijing Institute of TechnologyBeijing 100081China School of Informatic Engineering Mianyang Techers’CollegeMianyang 62100China Beijing Institute of Electronic System Engineering Beijing 100854China Beijing Institute of Space Long March Vehicle Beijing 100076China

With the increasing precision of guidance,the impact of autopilot dynamic characteristics and target maneuvering abilities on precision guidance is becoming more and more *** order to reduce or even eliminate the autopilot dynamic operation and the target maneuvering influence,this paper suggests a guidance system model involving a novel integral sliding mode guidance law(ISMGL).The method utilizes the dynamic characteristics and the impact angle,combined with a sliding mode surface scheme that includes the desired line-ofsight angle,line-of-sight angular rate,and second-order differential of the angular *** the same time,the evaluation scenario considere the target maneuvering in the system as the external disturbance,and the non-homogeneous disturbance observer estimate the target maneuvering as a compensation of the guidance *** proposed system’s stability is proven based on the Lyapunov stability *** simulations reveale that ISMGL effectively intercepted large maneuvering targets and present a smaller miss-distance compared with traditional linear sliding mode guidance laws and trajectory shaping guidance ***,ISMGL has a more accurate impact angle and fast convergence speed.

关键词： disturbance observer pilot dynamics integral sliding mode impact angle constraint maneuvering target

Progresses and Prospects of Asymmetrically Coordinated Single Atom Catalysts for Lithium-Sulfur Batteries

在线全文

学校读者我要写书评

暂无评论

Energy & Environmental Materials 2024年第4期7卷 48-63页

作者： Rong zhou Shaonan Gu Meng Guo Shuzheng Xu Guowei zhou Key Laboratory of Fine Chemicals in Universities of Shandong Jinan Engineering Laboratory for Multi-scale Functional Materials School of Chemistry and Chemical Engineering Qilu University of Technology(Shandong Academy of Sciences)

Lithium-sulfur batteries (LSBs) are widely regarded as promising next-generation batteries due to their high theoretical specific capacity and low material ***,the practical applications of LSBs are limited by the shuttle effect of lithium polysulfides (LiPSs),electronic insulation of charge and discharge products,and slow LiPSs conversion reaction kinetics.

关键词： asymmetrical coordination conversion catalysis Li-S batteries shuttle effect single atom catalysts

Physical and numerical investigations of target stratum selection for ground hydraulic fracturing of multiple hard roofs

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

International Journal of Mining Science and Technology 2024年第5期34卷 699-712页

作者： Binwei Xia Yanmin zhou Xingguo Zhang Lei zhou Zikun Ma State Key Laboratory of Coal Mine Disaster Dynamics and Control Chongqing UniversityChongqing 400044China School of Resources and Safety Engineering Chongqing UniversityChongqing 400044China

Ground hydraulic fracturing plays a crucial role in controlling the far-field hard roof,making it imperative to identify the most suitable target stratum for effective *** experiments are conducted based on engineering properties to simulate the gradual collapse of the roof during longwall top coal caving(LTCC).A numerical model is established using the material point method(MPM)and the strain-softening damage constitutive model according to the structure of the physical *** simulations are conducted to analyze the LTCC process under different hard roofs for ground hydraulic *** results show that ground hydraulic fracturing releases the energy and stress of the target stratum,resulting in a substantial lag in the fracturing of the overburden before collapse occurs in the hydraulic fracturing *** hydraulic fracturing of a low hard roof reduces the lag effect of hydraulic fractures,dissipates the energy consumed by the fracture of the hard roof,and reduces the abutment ***,it is advisable to prioritize the selection of the lower hard roof as the target stratum.

关键词： Target stratum selection Ground hydraulic fracturing Hard roof control Fracture network Material point method

激光冲击对K403镍基合金高温疲劳性能和断口形貌的影响

在线全文

学校读者我要写书评

暂无评论

中国激光 2014年第9期41卷 71-75页

作者：罗思海何卫锋周留成赖志林柴艳何光宇空军工程大学等离子体重点实验室中国人民解放军95321部队

对K403镍基合金涡轮叶片进行激光冲击强化(LSP),利用高温高低周复合疲劳试验验证其强化效果。试验结果表明:冲击后裂纹源区附近平坦区较冲击前变大,在快速扩展(FCG)区,激光冲击强化后疲劳条纹间距减小,有大量二次裂纹产生。且强化后在... 详细信息

对K403镍基合金涡轮叶片进行激光冲击强化(LSP),利用高温高低周复合疲劳试验验证其强化效果。试验结果表明:冲击后裂纹源区附近平坦区较冲击前变大,在快速扩展(FCG)区,激光冲击强化后疲劳条纹间距减小,有大量二次裂纹产生。且强化后在材料表层会引发晶粒细化以及高残余压应力,但在550℃/150min保温下,残余应力部分发生松弛,但是表层细化结构有很好的热稳定性。相比冲击前样件,激光冲击强化后涡轮叶片疲劳寿命提高了140%。热松弛后的残余压应力和表面晶粒细化是镍基合金疲劳寿命提高的主要原因。

关键词：激光光学激光冲击强化 K403镍基合金高温疲劳疲劳断口残余压应力

Shear strength degradation of gas hydrate-bearing sediment due to partial hydrate dissociation

在线全文

学校读者我要写书评

暂无评论

Journal of Rock Mechanics and Geotechnical Engineering 2024年第7期16卷 2749-2763页

作者： Yuan zhou Jiazuo zhou Pan Chen Changfu Wei State Key Laboratory of Geomechanics and Geotechnical Engineering Institute of Rock and Soil MechanicsChinese Academy of SciencesWuhan430071China University of Chinese Academy of Sciences Beijing100049China China University of Geosciences Wuhan430074China

Extraction of methane hydrate from subseafloor reservoir may potentially trigger seabed slides and induce *** address the problems,it is crucial to properly characterize the phase equilibrium condition of pore hydrate and the shear strength of the *** one of the key constitutive components,the phase equilibrium condition enforces a constraint over pore gas pressure,temperature and unhydrated water *** a constraint,however,has been traditionally ignored in analyzing the mechanical behavior of hydrate-bearing *** this paper,a series of stepwise hydrate dissociation tests was performed,and the phase equilibrium condition of pore hydrate was determined,providing an effective way to evaluate the unhydrated water content during hydrate ***,a series of direct shear tests was also conducted to explore the shear strength characteristics of the *** is shown that the shear strength of the hydrate-bearing soil can be significantly influenced by pore gas pressure,unhydrated water content,hydrate saturation and several other *** particular,the measured shear strength depends upon the initial water content of the sample,pointing to a potential problem that the shear strength could be wrongly determined if not properly interpreted.A shear strength criterion,which enforces the equilibrium condition of pore hydrate,is developed for hydrate-bearing soil,establishing a link between the equilibrium condition and the shear *** proposed equation describes well the shear strength characteristics of hydrate-bearing soils,remarkably unifying the effects of pore pressure,temperature,water content and hydrate saturation.

关键词： Hydrate-bearing soil Phase equilibrium condition Shear strength Unhydrated water content Mechanical behavior

An automatic Q-factor matching method for eliminating 77%of the ZRO of a MEMS vibratory gyroscope in rate mode

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Microsystems & Nanoengineering 2024年第3期10卷 35-48页

作者： Jingbo Ren Tong zhou Yi zhou Yixuan Li Yan Su School of Mechanical Engineering Nanjing University of Science and TechnologyNanjing 210000China

Mismatching quality factors(Q-factors)is one of the main factors causing zero-rate output(ZRO)in degenerate(DE)Micro-Electro-Mechanical Systems(MEMS)vibratory *** eliminate the ZRO of the DE MEMS gyroscope,this study introduces a method for real-time identification and automatic matching of Q-factors in rate *** leveraging the vibration characteristics of the DE MEMS vibratory gyroscope in rate mode,dedicated online test methods are designed to determine the Q-factors for both the drive and sense modes,enabling online identification of the Q-factor ***,an automatic Q-factor matching system is designed utilizing the mechanical-thermal dissipation mechanism of the resistive *** effectiveness of this proposed method is validated through simulations and experiments conducted on a MEMS disk resonator gyroscope(DRG).The results show a measurement error within 4%for Q-factor identification,and automatic Q-factor matching effectively reduces the ZRO by 77%.Employing this automatic Q-factor matching method successfully reduces the ZRO that is caused by the mismatching of Q-factors in the MEMS DRG from 0.11°/s to 0.025°/s and improves the bias instability(BI)from 0.40°/s to 0.19°/s.

关键词： matching mode method