检索结果-南通市图书馆

Acta Metallurgica Sinica(English Letters) 2024年第3期37卷 425-437页

作者： Yuhao Chen Kaibo Nie Kunkun Deng Zhilong liu Quanxin Shi College of Materials Science and Engineering Taiyuan University of TechnologyTaiyuan 030024China State Key Laboratory of Compressor Technology(Compressor Technology Laboratory of Anhui Province) Hefei 230031China Instrumental Analysis Center Taiyuan University of TechnologyTaiyuan 030024China

The integration of lightweight and high-modulus magnesium-based materials is becoming increasingly valued as structural materials due to the complexity and intelligence of industrial products like automobiles and *** this study,the graphene nanoplatelets(GNPs)/Mg-Zn-zr composites with 0.5 wt%GNPs were successfully prepared by the combination of multidirectional forging(MDF)and hot extrusion(Ex).The newly-developed composites after multi-step deformation possessed excellent strength and modulus,with a tensile strength exceeding 375 MPa and an elastic modulus reaching 54 *** results revealed that the stripping and thinning of GNPs bands parallel to the extrusion direction occurred after MDF+Ex,which promoted the dynamic recrystallization and the formation of numerous fine *** significant improvement in comprehensive mechanical performances of the composites could be primarily ascribed to the refinement of grain size caused by the optimized distribution of GNPs,and efficient load transfer facilitated by the tight interface.

关键词： Magnesium matrix composites Graphene nanoplatelets(GNPs) Multi-step deformation Microstructure Strength-modulus

Energy mechanism of bolt supporting effect to fissured rock under static and dynamic loads in deep coal mines

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Mining Science and Technology 2024年第3期34卷 371-384页

作者： Deyuan Fan Xuesheng liu Yunliang Tan Xuebin Li Shenglong Yang College of Energy and Mining Engineering Shandong University of Science and TechnologyQingdao 266590China State Key Laboratory of Mining Disaster Prevention and Control Shandong University of Science and TechnologyQingdao 266590China National Energy Group Ningxia Coal Industry Co. Ltd.Yinchuan 753001China

The stability control of fissured rock is difficult,especially under static and dynamic loads in deep coal *** this paper,the dynamic mechanical properties,strain rate evolution and energy dissipation of fissured and anchored rocks were respectively obtained by SHPB *** was found that bolt can provide supporting efficiency-improving effect for fissured rock against dynamic disturbance,and this effect increased quadratically with decrease in anchoring ***,the energy dissipation mechanism of anchored rock was obtained by slipping ***,bolt energy-absorbing mechanism by instantaneous tensile-shear deformation was expressed based on material mechanics,which was the larger the anchoring angle,the smaller the energy absorption,and the less the contribution to supporting efficiency *** this basis,the functional relationship between energy dissipation of anchored rock and energy absorption of bolt was *** the coal-gangue separation system of Longgu coal mine as an example,the optimal anchoring angle can be determined as 57.5°–67.5°.Field monitoring showed fissured rock with the optimal anchoring angle,can not only effectively control the deformation,but also fully exert the energy-absorbing and efficiency-improving effect of bolt *** study provides guidance to the stability control and supporting design for deep engineering under the same or similar conditions.

关键词： Static and dynamic loads Anchored rock Energy absorption Anchoring angle Engineering verification

Starlet:Network defense resource allocation with multi-armed bandits for cloud-edge crowd sensing in IoT

在线全文

学校读者我要写书评

暂无评论

Digital Communications and Networks 2024年第3期10卷 586-596页

作者： Hui Xia Ning Huang Xuecai Feng Rui Zhang Chao liu College of Computer Science and Technology Ocean University of ChinaQingdao266100China

The cloud platform has limited defense resources to fully protect the edge servers used to process crowd sensing data in Internet of *** guarantee the network's overall security,we present a network defense resource allocation with multi-armed bandits to maximize the network's overall ***,we propose the method for dynamic setting of node defense resource thresholds to obtain the defender(attacker)benefit function of edge servers(nodes)and ***,we design a defense resource sharing mechanism for neighboring nodes to obtain the defense capability of ***,we use the decomposability and Lipschitz conti-nuity of the defender's total expected utility to reduce the difference between the utility's discrete and continuous arms and analyze the difference ***,experimental results show that the method maximizes the defender's total expected utility and reduces the difference between the discrete and continuous arms of the utility.

关键词： Internet of things Defense resource sharing Multi-armed bandits Defense resource allocation

Toughening additive manufactured zr-based bulk metallic glass composites by martensite phase transformation

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2024年第3期170卷 95-102页

作者： Pengcheng Zhang Cheng Zhang Jie Pan Di Ouyang Lin liu State Key Laboratory of Materials Processing and Die&Mould Technology School of Materials Science and EngineeringHuazhong University of Science and TechnologyWuhan 430074China

Additive manufacturing technology based on laser powder bed fusion(LPBF)offers a novel approach for fabricating bulk metallic glass(BMG)products without restriction in size and ***,the BMGs prepared by LPBF usually suffered from less plasticity and poorer fracture toughness as compared to their cast counterparts due to partial crystallization in heat-affected zones(HAZs).Since crystallization in HAZs is hard to avoid completely in LPBF BMGs,it is desirable to design a suitable alloy system,in which only ductile crystalline phase,instead of brittle intermetallics,is formed in *** unique structure could effectively increase the toughness/plasticity of the LPBF *** achieve this goal,a quaternary BMG system with a composition of zr_(47.5)Cu_(45.5)Al_(5)Co_(2)is adopted and subjected to *** is found that nearly a single phase of B_(2)-zrCu is precipitated in HAZs,while a fully amorphous phase is formed in molten pools(MPs).This B_(2)phase reinforced BMG composite exhibits excellent mechanical properties with enhanced plasticity and ***,it is easy to modulate the mechanical properties by altering the amount of the B_(2)phase via adjusting the laser energy ***,the best combination of strength,plasticity,and notch toughness is obtained in the BMG composite containing 27.4%B_(2)phase and 72.6%amorphous phase,which exhibits yield strength(σ_(s))of 1423 MPa,plastic strain(ε_(p))of 4.65%,and notch toughness(K_(q))of 53.9 MPa m 1/***,a notable strain-hardening is also *** improvement of plasticity/toughness and appearance of strain-hardening behavior are mainly due to the martensite phase transformation from the B_(2)phase to the Cm phase during plastic deformation(i.e.,the phase transformation-induced plasticity effect).The current work provides a guide for making advanced BMGs and BMG composites by additive manufacturing.

关键词： Laser powder bed fusion Bulk metallic glass composites Phase transformation-induced plasticity Deformation mechanism

Preferential Formation of Ethylene via Electrocatalytic CO_(2) Reduction on Mesoporous Cu_(2)O Nanoparticles:Synergistic Effects of Pore Structure Confinement and Surface Amine

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Chemistry 2024年第16期42卷 1846-1852页

作者： Haifeng Zhang Dun Li Zhifang Chen Yingying Wang Haoyu Sun Feng liu Maochang liu Yiqun Zheng Hongwen Huang School of Chemistry Chemical Engineering and MaterialsJining UniversityQufuShandong 273155China College of Materials Science and Engineering Hunan UniversityChangshaHunan 410082China Health Management Department Shandong Vocational College of Light IndustryZiboShandong 255300China International Research Center for Renewable Energy National Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiotong UniversityXi'anShaanxi 710049China

We present a facile synthetic strategy to create mesoporous Cu_(2)O nanocrystals with tunable pore structures and surface functional groups of amine derivatives for efficient and preferable electrochemical conversion of CO_(2) into *** structural characteristics of theseCu_(2)O nanocrystals can be manipulated using a set of amine derivatives,such as pyridine,4,4'-bipyridine,and hexamethylenetetramine,during the oxidative etching process of Cu nanocrystals by bubbling gaseous oxygen in N,N-dimethylformamide *** amine derivatives not only serve as surface functional groups but also significantly affect the resulting pore *** synergistic effect of pore structure confinement and surface amine functionalization leads to the superb Faradaic efficiency(FE)of 51.9% for C_(2)H_(4),respectively,together with the C_(2)H_(4) partial current density of -209.4 mA·cm^(-2) at -0.8 V *** hydrogen electrode(RHE).The relatively high selectivity towards C_(2)H_(4) was investigated using DFT simulations,where 4,4'-bipyridine functionalized Cu_(2)O seemed to favor the C_(2)H_(4) formation with the low free energy of the *** study provides a feasible strategy to manipulate the pore structure and surface functionalization of mesoporous Cu_(2)O nanocrystals by regulating the oxidative etching process,which sheds light on the rational preparation of high-performance CO_(2)RR electrocatalysts.

关键词： Amines Ethylene Cuprous oxide CO_(2)reduction Mesoporous materials

Maize ZmSRO1e promotes mesocotyl elongation and deep sowing tolerance by inhibiting the activity of ZmbZIP61

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Integrative Plant Biology 2024年第8期66卷 1571-1586页

作者： Lumin Qin Fangfang Kong Lin Wei Minghan Cui Jianhang Li Chen Zhu Yue liu Guangmin Xia Shuwei liu Key Laboratory of Plant Development and Environmental Adaptation Biology Ministry of EducationSchool of Life ScienceShandong UniversityQingdao 266237China Crop Research Institute Anhui Academy of Agricultural SciencesHefeiAnhui Province 230031China

Deep sowing is a traditional method for drought resistance in maize production,and mesocotyl elongation is strongly associated with the ability of maize to germinate from deep ***,little is known about the functional genes and mechanisms regulating maize mesocotyl *** the present study,we identified a plant-specific SIMILAR TO RCD-ONE(SRO) protein family member,ZmSRO1e,involved in maize mesocotyl *** expression of ZmSRO1e is strongly inhibited upon transfer from dark to white *** loss-of-function zmsro1e mutant exhibited a dramatically shorter mesocotyl than the wild-type in both constant light and darkness,while overexpression of ZmSRO1e significantly promoted mesocotyl elongation,indicating that ZmSRO1e positively regulates mesocotyl *** showed that ZmSRO1e physically interacted with Zmb ZIP61,an ortholog of Arabidopsis ELONGATED HYPOCOTYL 5(HY5) and showed a function similar to that of HY5 in regulating *** found that ZmSRO1e repressed the transcriptional activity of Zmb ZIP61 toward target genes involved in the regulation of cell expansion,such as ZmEXPB4 and ZmEXPB6,by interfering with the binding of ZmbZIP61 to the promoters of target *** results provide a new understanding of the mechanism by which SRO regulates photomorphogenesis and highlight its potential application in deep sowing-resistant breeding.

关键词： deep sowing HY5 maize Mesocotyl SRO

Diamond-Like Carbon Depositing on the Surface of Polylactide Membrane for Prevention of Adhesion Formation During Tendon Repair

在线全文

学校读者我要写书评

暂无评论

Nano-Micro Letters 2024年第9期16卷 478-499页

作者： Yao Xiao Zaijin Tao Yufeng Ju Xiaolu Huang Xinshu Zhang Xiaonan liu Pavel A.Volotovski Chao Huang Hongqi Chen Yaozhong Zhang Shen liu Department of Orthopaedics Shanghai Jiao Tong University School of Medicine Affiliated Sixth People’s Hospital600 Yishan RdShanghai 200233People’s Republic of China Shanghai Tongji Hospital 389 Xincun RdShanghai 200065People’s Republic of China Key Laboratory for Thin Film and Microfabrication of Ministry of Education Research Institute of Micro/Nano Science and TechnologyShanghai Jiao Tong UniversityShanghai 200240People’s Republic of China Orthopedic Trauma Department Belarus Republic Scientific and Practical Center for Traumatology and OrthopedicsKizhevatova str.60/4220024 MinskBelarus Shanghai Haohai Biological Technology Limited Liability Company 1386 Hongqiao RdShanghai 200336People’s Republic of China Department of General Surgery Shanghai Jiao Tong University School of Medicine Affiliated Sixth People’s Hospital600 Yishan RdShanghai 200233People’s Republic of China Shanghai Key Laboratory for High Temperature Materials and Precision Forming School of Materials Science and EngineeringShanghai Jiao Tong UniversityShanghai 200240People’s Republic of China

Post-traumatic peritendinous adhesion presents a significant challenge in clinical *** study proposes the use of diamond-like carbon(DLC)deposited on polylactic acid(PLA)membranes as a biophysical mechanism for anti-adhesion barrier to encase ruptured tendons in tendon-injured *** results indicate that PLA/DLC composite membrane exhibits more efficient anti-adhesion effect than PLA membrane,with histological score decreasing from 3.12±0.27 to 2.20±0.22 and anti-adhesion effectiveness increasing from 21.61%to 44.72%.Mechanistically,the abundant C=O bond functional groups on the surface of DLC can reduce reactive oxygen species level effectively;thus,the phosphorylation of NF-κB and M1 polarization of macrophages are ***,excessive inflammatory response augmented by M1 macrophage-originated cytokines including interleukin-6(IL-6),interleukin-1β(IL-1β),and tumor necrosis factor-α(TNF-α)is largely *** biocompatibility evaluation,PLA/DLC membrane is slowly absorbed within tissue and displays prolonged barrier effects compared to traditional PLA *** studies show the DLC depositing decelerates the release of degradation product lactic acid and its induction of macrophage M2 polarization by interfering esterase and PLA ester bonds,which further delays the fibrosis *** was found that the PLA/DLC membrane possess an efficient biophysical mechanism for treatment of peritendinous adhesion.

关键词： Diamond-like carbon Reactive oxygen species scavenging Foreign body reaction Biodegradation Antioxidant Peritendinous adhesion

Atomic-level insights into the initial oxidation mechanism of high-entropy diborides by first-principles calculations

在线全文

学校读者我要写书评

暂无评论

Journal of Materiomics 2024年第2期10卷 423-430页

作者： Yiwen liu Hulei Yu Hong Meng Yanhui Chu School of Materials Science and Engineering South China University of TechnologyGuangzhou510641China

Understanding the initial oxidation mechanism is critical for studying the oxidation resistance of high-entropy ***,related studies are ***,the initial oxidation mechanism of(zr_(0.25)Ti_(0.25)Nb_(0.25)Ta_(0.25))B_(2)high-entropy diborides(HEB_(2)-1)is investigated by first-principles calculations at the atomic *** employing the two-region model method,the most stable surface of HEB_(2)-1 is determined to be(1120)*** dissociative adsorption process of the oxygen molecule on the HEB_(2)-1-(1120)surface is predicted to proceed spontaneously,where OeO bond breaks and each oxygen atom is chemisorbed on the most preferable hollow *** adsorption energy and the diffusion barrier of the oxygen atom on the(1120)surface of HEB_(2)-1 are in the vicinity of the average level of the cor-responding four individual *** addition,ab initio molecular dynamics simulations indicate a high initial oxidation resistance of HEB_(2)-1 at 1000 *** results are beneficial to further designing the high-entropy diborides with excellent oxidation resistance.

关键词： High-entropy diborides Oxidation First-principles calculations

How do lateral septum projections to the ventral CA1 influence sociability?

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Neural Regeneration Research 2024年第8期19卷 1789-1801页

作者： Dan Wang Di Zhao Wentao Wang Fengai Hu Minghu Cui Jing liu Fantao Meng Cuilan liu Changyun Qiu Dunjiang liu Zhicheng Xu Yameng Wang Yu Zhang Wei Li Chen Li Department of Rehabilitation Medicine Binzhou Medical University HospitalBinzhouShandong ProvinceChina Medical Research Center Binzhou Medical University HospitalBinzhouShandong ProvinceChina Institute for Metabolic&Neuropsychiatric Disorders Binzhou Medical University HospitalBinzhouShandong ProvinceChina Department of Psychology Binzhou Medical University HospitalBinzhouShandong ProvinceChina College of Nursing Binzhou Medical UniversityBinzhouShandong ProvinceChina

Social dysfunction is a risk factor for several neuropsychiatric *** studies have shown that the lateral septum(LS)-related pathway plays a critical role in mediating social *** r,the role of the connections between the LS and its downstream brain regions in social behavio rs remains unclea *** this study,we conducted a three-chamber test using electrophysiological and chemogenetic approaches in mice to determine how LS projections to ventral CA1(vCA1)influence *** res ults showed that gamma-aminobutyric acid(GABA)-e rgic neuro ns were activated following social experience,and that social behavio rs were enhanced by chemogenetic modulation of these ***,LS GABAergic neurons extended their functional neural connections via vCA1 glutamatergic pyramidal neurons,and regulating LSGABA→vCA1Gluneural projections affected social behaviors,which were impeded by suppressing LSprojecting vCA1 neuronal activity or inhibiting GABAAreceptors in *** findings support the hypothesis that LS inputs to the vCA1 can control social prefe rences and social novelty *** findings provide new insights rega rding the neural circuits that regulate sociability.

关键词： chemogenetics GABA receptor GABAergic neurons glutamatergic neurons lateral septum neural excitability neural projection social novelty social preference ventral CA1

Fabrication of patterned transparent conductive glass via laser metal transfer for efficient electrical heating and antibacteria

在线全文

学校读者我要写书评

暂无评论

Nano Research 2024年第3期17卷 1578-1584页

作者： Xiaoyan liu Ting Zhang Mengchen Xu Yang Li Haiqing Wang Yuke Chen Xuzihan Zhang Zenan Wang Xiaoyan Li Weijia Zhou Hong liu Institute for Advanced Interdisciplinary Research(iAIR) School of Chemistry and Chemical EngineeringUniversity of JinanJinan 250022China School of Physics and Technology University of JinanJinan 250024China Department of Endodontics School and Hospital of StomatologyCheeloo College of MedicineShandong University&Shandong Key Laboratory of Oral Tissue Regeneration&Shandong Engineering Laboratory for Dental Materials and Oral Tissue RegenerationJinan 250012China School of Information Science and Engineering University of JinanJinan 250022China Shenzhen Institute of Advanced Technology Chinese Academy of SciencesShenzhen 518055China

Vapor deposition and three-dimensional(3D)printing technology are considered to be conventional methods to achieve patterned metal film preparation through the assistance of masks and high ***,there are still some challenges in fabricating metal films in template-free and normal temperature *** this work,we report a flexible and rapid laser metal transfer(LMT)technique for fabricating the various metal films(Cu,Ni,Sn,Al,Fe,and Ag)with different patterns without templates on arbitrary substrates(glass,polyimide(PI)films,and aluminum nitride(AlN)ceramic).Especially,the obtained transparent conductive glass displays high transmittance(more than 90%)and adjustable resistances(≈5Ω).According to the Joule effect,the interface resistance between Cu particles and copper oxide coating produces the high temperature approximately 280℃ at 2 V in a short time(≈60 s)and remains stable at 120℃ over 12 *** last,the multifunctional glass with Cu patterns also shows excellent bactericidal activity(≈95%).This work demonstrates that laser metal transfer is an exceeding effective means of fabricating the micro/nano structures with potential applications in functional devices.

关键词： laser metal transfer(LMT) transparent conductive glass electrical heating copper pattern antibacterial