检索结果-南通市图书馆

Transactions of Nonferrous Metals Society of China 2022年第6期32卷 1805-1821页

作者： Hiromi NAGAUMI Jian QIN Cheng-bin YU Xiao-guo wang lin-sheng wang High Performance Metal Structural Materials Research Institute Soochow UniversitySuzhou 215021China Shagang School of Iron and Steel Soochow UniversitySuzhou 215021China College of Agricultural Engineering Shanxi Agricultural UniversityTaigu 030801China Press Metal International Ltd. Foshan 528000China

The microstructural evolution of AA6061 and Mn-bearing Al-Mg-Si-Cu alloys was studied by compression tests that were carried out between 300 and 500 °C with a wide range of strain rates. Compared to the AA6061 alloy, the large amount of α-Al(MnFeCr)Si dispersoids in the Mn-bearing alloy yielded a significant increase in the flow stress under all deformation conditions. The effects of the deformation parameters on the evolution of the microstructure were studied using electronic backscatter diffraction measurements. The predominant softening mechanism of both alloys was dynamic recovery. The presence of α dispersoids in Mn-bearing alloys effectively refined the size of substructures with misorientation angles in the range of 2°-5°, which retarded the dynamic recovery. To predict the subgrain size under various deformation conditions, the threshold stresses that were caused by α dispersoids were calculated by the modified Orowan equation and incorporated into a conventional constitutive equation. The subgrain size that was predicted by the modified constitutive equation showed satisfactory agreement with the experimental measurements.

关键词： Al-Mg-Si alloy hot deformation α-Al(MnFeCr)Si dispersoids substructure dynamic softening threshold stress Z parameter

A CASCADING LATIN SCHEME TO TOLERATE DOUBLE DISK FAILURES IN RAID ARCHITECTURES

在线全文

学校读者我要写书评

暂无评论

Journal of Electronics(China) 2010年第2期27卷 243-249页

作者： lin sheng wang Gang Liu Xiaoguang Liu Jing Nankai-Baidu Joint Laboratory College of Information and Technical Science Nankai University Tianjin 300071 China

In recent years,a lot of XOR-based coding schemes have been developed to tolerate double disk failures in Redundant Array of Independent Disks (RAID) architectures,such as EVENODD-code,X-code,B-code and BG-HEDP. Despite those researches,the decades-old strategy of Reed-Solomon (RS) code remains the only popular space-optimal Maximum Distance Separable (MDS) code for all but the smallest storage systems. The reason is that all those XOR-based schemes are too difficult to be implemented,it mainly because the coding-circle of those codes vary with the number of disks. By contrast,the coding-circle of RS code is a constant. In order to solve this problem,we develop a new MDS code named Latin code and a cascading scheme based on Latin code. The cascading Latin scheme is a nearly MDS code (with only one or two more parity disks compared with the MDS ones). Nev-ertheless,it keeps the coding-circle of the basic Latin code (i.e. a constant) and the low encod-ing/decoding complexity similar to other parity array codes.

关键词： 2-erasure code Redundant Array of Independent Disks (RAID) Latin square

Effect of Mo and cold forging deformation on strength and ductility of cobalt-based alloy L605

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第7期31卷 1811-1823页

作者： Zhong-lin wang Zhi-hua Gong Quan Li Han-sheng Bao School of Materials and Metallurgy Inner Mongolia University of Science and TechnologyBaotou 014017Inner MongoliaChina Institute of Special Steels Central Iron and Steel Research Institute Co.Ltd.Beijing 100081China

Mo element was added to cobalt-based alloy L605,and cold forging deformation was *** effects of the addition and cold forging deformation on the microstructure and mechanical properties of the alloy were studied by thermodynamic calculation,electron backscatter diffraction,transmission electron microscopy,and X-ray *** stacking fault energy(SFE)of the alloy decreased after the addition,and the formation of stacking faults and intersections were promoted to improve the strength and *** tensile strength of the alloy with Mo increased from 1190 to 1702 MPa after 24%cold deformation,producing significant work *** strengthening mechanism is strain-induced martensitic transformation(SIMT)and deformation *** alloy,combined with Mo and after 24%deformation,had both high strength and ductility in comparison with the original cobalt-based alloy *** is attributed to the lower SFE which caused the increase in stacking fault *** the tensile process,theε-hcp phase was easily generated at the stacking fault to reduce the stress concentration and increase the *** SIMT by adjusting the density of stacking faults can improve the mechanical properties of cobalt-based ***ε-hcp phase,the interaction between deformation twins and dislocations,and the interaction between e-hcp phases during cold forging deformation caused local stress concentration,lowering ductility and toughness.

关键词： Cobalt-based alloy-Stacking fault energy Strain-induced martensitic transformation Deformation twin Cold forging deformation

Transverse mode-coupling instability with longitudinal impedance

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nuclear Science and Techniques 2024年第6期35卷 40-53页

作者： Hai-sheng Xu Chun-Tao lin Na wang Jing-Ye Xu Yuan Zhang Key Laboratory of Particle Acceleration Physics and Technology Institute of High Energy PhysicsChinese Academy of SciencesBeijing 100049China University of Chinese Academy of Sciences Beijing 100049China Institute of Advanced Science Facilities Shenzhen 518107GuangdongChina

Transverse mode-coupling instability(TMCI)is a dangerous transverse single-bunch instability that can lead to severe par-ticle *** mechanism of TMCI can be explained by the coupling of transverse coherent oscillation modes owing to the transverse short-range wakefield(i.e.,the transverse broadband impedance).Recent studies on future circular colliders,e.g.,FCC-ee,showed that the threshold of TMCI decreased significantly when both longitudinal and transverse impedances were *** performed computations for the circular electron-positron collider(CEPC)and observed a similar *** studies on the influence of longitudinal impedance on the TMCI threshold were *** concluded that the imaginary part of the longitudinal impedance,which caused a reduction in the incoherent synchrotron tune,was the primary reason for the reduction in the TMCI ***,the real part of the longitudinal impedance assists in increasing the TMCI threshold.

关键词： Transverse mode-coupling instability Longitudinal impedance

同方期刊数据库

Traveling Wave Characteristics Based Pilot Protection Scheme for Hybrid Cascaded HVDC Transmission line

在线全文

学校读者我要写书评

暂无评论

Journal of Modern Power Systems and Clean Energy 2024年第3期12卷 971-980页

作者： Dalin Mu sheng lin Xiaopeng Li the School of Electrical Engineering Southwest Jiaotong UniversityChengdu 611756China the State Grid Sichuan Electric Power Research Institute Chengdu 610041China

The hybrid cascaded high-voltage direct current(HVDC)transmission system has various operation modes,and some operation modes have sharply increasing requirements for protection rapidity,while the traditional pilot differential protection(PDP)has poor rapidity,and even refuses to operate when faults occur on the DC ***,a novel pilot protection scheme based on traveling wave characteristics is ***,the adaptability of the traditional PDP applied in engineering is analyzed for different operation ***,the expressions of the forward traveling wave(FTW)and backward traveling wave(BTW)on the rectifier side and the inverter side are derived for different fault *** the theoretical derivation,the difference between the BTW and FTW on the rectifier side is less than zero,and the same is true on the inverter ***,in the event of an external fault of DC line,the difference between the BTW and FTW at nearfault terminal protection installation point is greater than ***,by summing over the product of the difference between BTW and FTW of the rectifier side and that of the inverter side,the fault identification criterion is *** simulation results show that the proposed pilot protection scheme can quickly and reliably identify the short-circuit faults of DC line in different operation modes.

关键词： Hybrid cascaded high-voltage direct current(HVDC)transmission system DC line operation mode pilot protection

Super-resolution diffractive neural network for alloptical direction of arrival estimation beyond diffraction limits

在线全文

学校读者我要写书评

暂无评论

Light(Science & Applications) 2024年第8期13卷 1602-1614页

作者： sheng Gao Hang Chen Yichen wang Zhengyang Duan Haiou Zhang Zhi Sun Yuan Shen Xing lin Department of Electronic Engineering Tsinghua UniversityBeijing 100084China Beijing National Research Center for Information Science and Technology Tsinghua UniversityBeijing 100084China

Wireless sensing of the wave propagation direction from radio sources lays the foundation for communication,radar,navigation,***,the existing signal processing paradigm for the direction of arrival estimation requires the radio frequency electronic circuit to demodulate and sample the multichannel baseband signals followed by a complicated computing process,which places the fundamental limit on its sensing speed and energy ***,we propose the super-resolution diffractive neural networks(S-DNN)to process electromagnetic(EM)waves directly for the DOA estimation at the speed of *** multilayer meta-structures of S-DNN generate super-oscillatory angular responses in local angular regions that can perform the all-optical DOA estimation with angular resolutions beyond the diffraction *** spatial-temporal multiplexing of passive and reconfigurable S-DNNs is utilized to achieve high-resolution DOA estimation over a wide field of *** S-DNN is validated for the DOA estimation of multiple radio sources over 5 GHz frequency bandwidth with estimation latency over two to four orders of magnitude lower than the state-of-the-art commercial devices in *** results achieve the angular resolution over an order of magnitude,experimentally demonstrated with four times,higher than diffraction-limited *** also apply S-DNN’s edge computing capability,assisted by reconfigurable intelligent surfaces,for extremely low-latency integrated sensing and communication with low power *** work is a significant step towards utilizing photonic computing processors to facilitate various wireless sensing and communication tasks with advantages in both computing paradigms and performance over electronic computing.

关键词： beyond optical network

Heterogeneous engineering of MnSe@NC@ReS_(2) core-shell nanowires for advanced sodium-/potassium-ion batteries

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Rare Metals 2024年第8期43卷 3713-3723页

作者： sheng-Jun Lu Jin-Yi lin Cai-Hong wang Yu-Fei Zhang Yi Zhang Hao-Sen Fan College of Materials Science and Metallurgy Engineering Guizhou University Guiyang 550025China School of Energy Science and Engineering Nanjing Tech UniversityNanjing 211816China School of Chemistry and Chemical Engineering Guangzhou UniversityGuangzhou 510006China

Sodium-ion batteries(SIBs) and potassium-ion batteries(PIBs) have been attracting great attentions and widely been exploited due to the abundant sodium/potassium ***,the preparation of high-powered anode materials for SIBs/PIBs plays a decisive role for the commercial applications of SIBs/PIBs in the *** selenides are a class of potential anode materials for SIBs/PIBs because of their small band gap and high electrical *** this work,MnSe and ReS_(2) core-shell nanowires connecting by polydopamine derived carbon nanotube(MnSe@NC@ReS_(2)) have been successfully synthesized from growing ReS_(2) nanosheets array on the surface of MnSe@NC nano wires,which present excellent Na^(+)/K^(+) storage *** applied as SIBs anode,the specific capacity of 300 mAh·g^(-1) was maintwined after 400 cycles at the current density of 1.0 A·g^(-1).Besides,it could also keep 120 mAh·g^(-1) specific capacity after 900 cycles at 1.0 A·g^(-1) for the anode of *** heterogeneous engineering and one-dimensional-two-dimensional(1D-2D) hybrid strategies could provide an ideal strategy for the synthesis of new hetero-structured anode materials with outstanding battery performance for SIBs and PIBs.

关键词： Heterogeneous engineering Core-shell nanowires MnSe@NC@ReS_(2)nanowires Na^(+)batteries K^(+)batteries

Transparent micropatterned conductive films based on highlyordered nanowire network

在线全文

学校读者我要写书评

暂无评论

Nano Research 2024年第5期17卷 4288-4297页

作者： Xin-Ran Zhang Hai-Tao Deng Xu Zeng Yi-lin wang Peng Huang Xiao-sheng Zhang School of Integrated Circuit Science and Engineering University of Electronic Science and Technology of ChinaChengdu 611731China

Transparent conductive films that are based on nanowire networks are essential to construct flexible,wearable,and even stretchable ***,large-scale precise micropatterning,especially with regard to the controllability of the organizing orientation of nanowires,is a critical ***,we proposed a liquid film rupture self-assembly approach for manufacturing transparent conductive films with microstructure arrays based on a highly ordered nanowire *** large-scale microstructure conductive films were fabricated through air-liquid interface self-assembly and liquid film rupture *** typical micropattern morphologies,including square,hexagon,circle,serpentine,etc.,were prepared to reveal the universal applicability of the proposed *** homogeneity and controllability of this approach were verified for multiple *** the assembly cycles increasing,the optical transmittance decreases *** addition,theoretical model analysis is carried out,and the analytical formula of the speed of the film moving with the surface tension and the density of the liquid film is ***,the feasibility of this approach for piezoresistive strain sensors is *** fabrication approach demonstrated a cost-effective and efficient method for precisely arranging nanowires,which is useful in transparent and wearable applications.

关键词： flexible electronics transparent conductive network micropatterning nanowires micro electromechanical systems(MEMS)

Highly Transparent Fire-resistant Coatings with Intumescent Three-source Integration

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Polymer Science 2024年第7期42卷 907-915,I0005页

作者： Xiao-Liang Zeng Xin-sheng Lan Yan wang lin Zhang De-Ming Guo Hai-Bo Zhao State Grid Sichuan Electric Power Research Institute Chengdu610041China The Collaborative Innovation Center for Eco-Friendly and Fire-Safety Polymeric Materials(Ministry of Education) National Engineering Laboratory of Eco-Friendly Polymeric Materials(Sichuan)State Key Laboratory of Polymer Materials EngineeringCollege of ChemistrySichuan UniversityChengdu610064China

Wood,a readily available and sustainable natural resource,has found widespread use in construction and ***,its inherent flammability poses a potential fire *** intumescent fire-retardant coatings effectively mitigate this risk,achieving high transparency in such coatings presents a significant *** our approach,we employed a cross-linked network of phytic acid anion and N-[3-(trimethoxysilyl)propyl]-N,N,N-trimethylammonium cation to create a transparent"three-in-one"intumescent *** collaborative P/N/Si flame-retardant effect markedly improved the intumescent char-forming capability,preventing the wood from rapid *** resulted in a substantial reduction in heat release(13.9%decrease in THR)and an increased limiting oxygen index(LOI)value of 35.5%.Crucially,the high transparency of the coating ensured minimal impact on the wood's appearance,allowing the natural wood grains to remain clearly *** innovative approach provides a straightforward method for developing transparent intumescent flame-retardant coatings suitable for wooden *** potential applications extend to preserving ancient buildings and heritage conservation efforts.

关键词： Fire-resistant coating Flame retardancy Wood Transparency

Flexible MXene/sodium alginate composite fabric with high structural stability and oxidation resistance for electromagnetic interference shielding

在线全文

学校读者我要写书评

暂无评论

Nano Research 2024年第6期17卷 5326-5335页

作者： Hao-Wen Zhang Lu-Yao Yang Meng-lin Huang Ming-Hua Cheng Zhe-sheng Feng Fanbin Meng Zifeng lin Yan wang School of Materials and Energy University of Electronic Science and Technology of ChinaChengdu 610054China Laboratory of Advanced Technologies of Materials(Ministry of Education) School of Materials Science and EngineeringSouthwest Jiaotong UniversityChengdu 610031China College of Materials Science and Engineering Sichuan UniversityChengdu 610065China

Wearable electromagnetic interference(EMI)shielding fabrics with excellent electromagnetic shielding performance,oxidation resistance,and structural stability are highly demanded for the rapid development of electronic devices and wireless *** are metallic conductive materials with exceptional EMI shielding properties,but they are prone to oxidation in air and have poor structural stability and durability on fabric ***,we present a one-step assembly method to fabricate fabrics coated with MXenes and polymeric sodium alginate(SA)composite(MXene-SA).SA protects MXenes from oxidation and forms a stable interlayer structure by bonding to *** MXene-SA coated fabrics are breathable and flexible,and have a low sheet resistance of 2.12±0.08Ω/sq and a high EMI shielding performance of 37.05 dB at X-band,which is comparable to the best 42.31 ***,the MXene-SA coated fabrics exhibit high structural stability and oxidation resistance under various conditions of sonication disintegration,mechanical abuse,chemical corrosion,and humidity,compared to pure MXenes coated *** believe that the wearable and high-performance MXene-SA fabrics have great potential for the next generation of ultra-portable and wearable EMI shielding products.

关键词： MXenes electromagnetic interference shielding fabric one-step assembly