检索结果-南通市图书馆

Fabrication of Molecularly Imprinted Electrospun Nanofibers with Mono-amidoxime Functional Ligand for Efficient Decontamination of Toxic Organophosphates

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Polymer Science 2024年第4期42卷 446-456页

作者： Lan Wang Peng Jiang ya-lin Niu Jun-Peng Cao Tian-Ying guo Key Laboratory of Functional Polymer Materials Ministry of EducationInstitute of Polymer ChemistryCollege of Chemistry and Frontier Science Center for the Creation of New Organic SubstancesNankai UniversityTianjin300071China

There is an urgent imperative to discover practical and efficacious artificial catalysts for the expeditious decontamination of toxic organophosphates. Herein, we propose a novel molecularly imprinted approach utilizing electrospun fiber scaffolds. Specifically, an amidoxime-based functional polymer (PMAOX) has been synthesized, which contains amidoxime groups that can act as nucleophiles and ligands for the formation of catalytic active sites. This polymer was blended with polyacrylonitrile (PAN), a well-processable material, to prepare a nanofiber mat using electrospinning techniques. Then, the amidoxime side groups on fiber surface were further cross-linked after the molecular coordination of templates to complete the molecularly imprinting process. This approach can not only enhance the content of functional molecularly imprinted polymers without affecting structural stability, but also combines surface MI technology to fully expose and leverage the advantages of active sites. The as prepared molecularly imprinted electrospun nanofibers MIF-Zn-PMAOX/PAN-6/4 catalyzes the degradation of paraoxon with a half-life of 32 min, and MIF-Ag-PMAOX/PAN catalyzes the degradation of parathion with a half-life of 18 min. The maximum catalytic rate evidence rate enhancements nearly 3700-fold of the self-hydrolysis. Thus, the mono-amidoxime based molecularly imprinted fibers demonstrate the versatility and superiority as self-detoxifying for organophosphates.

关键词： Organophosphateshydrolysis Electrospinning Molecular imprinting

Enhancing reversible hydrogen storage performance of 2LiBH4–MgH2 via in-situ building heterogeneous nucleation sites

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第9期43卷 4367-4376页

作者： Wei Chen ya-Hui Sun Tian Xu Xue-Bin Yu guang-lin Xia Department of Materials Science Fudan University

2LiBH4-MgH2composite is one of the most attractive reactive hydride composites with a theoretic hydrogen capacity of 10.8 wt%.However,the large nucleation restriction of MgB2during the second step of dehydrogenation results in sluggish hydrogen storage kinetics and high operating temperature,which hinders its practical application as on-board hydrogen storage ***,Al3Ti doped Al nanoparticles （AT NPs） are prepared by a facile chemical reduction reaction to improve the hydrogen storage performance of *** the initial H2desorption process,MgAlB4and TiB2that have identical crystal structure and low d-value mismatch with MgB2resulting from the reaction between AT NPs and 2LiBH4-MgH2composite serve as effective nucleation sites for the formation of *** a result,the apparent activation energy of the two-step H2desorption of AT NPs doped 2LiBH4-MgH2composite are notably decreased to （110.0±5.9） and（119.6±1.4） kJ·mol-1,which is 55.5 and 33.5 kJ·mol-1lower than that of the undoped *** importantly,a reversible hydrogen storage capacity of 9.2 wt%after 10cycles of H2desorption and adsorption could be achieved,corresponding to a capacity retention rate of 99%.The building of reactive bimetallic catalyst towards in situ formation of heterogeneous nucleation sites provides a new strategy for improving the hydrogen storage performance of reactive hydride composites.

关键词： Catalytic effects Heterogeneous nucleation Reactive hydride composites Reversible hydrogen storage

ground state of Rydberg-dressed Bose gas confined in a toroidal trap

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Communications in Theoretical Physics 2024年第1期76卷 29-35页

作者： lin-Xue Wang Hong-Li ya.g Hui Liu Si-lin Chen ya-Jun Wang Xiao-Fei Zhang Department of Physics School of Physics and Information ScienceShaanxi University of Science and TechnologyXi'an 710021China Department of Basic Sciences Air Force Engineering UniversityXi'an 710051China

The experimental realization of Rydberg dressing technology in ultracold atomic systems provides another superior platform for studying novel states of matter and macroscopic quantum *** this work,based on the mean-field theory,we have investigated the ground-state phases of a two-component Bose–Einstein condensate with Rydberg interaction and confined in a toroidal *** effects of the Rydberg interaction and external potential,especially the Rydberg blockade radius,on the ground-state structure of such a system have been investigated in full parameter *** results show that the Rydberg blockade radius,which can be regarded as another controllable parameter,can be used to obtain a variety of ground-state *** interestingly,it is found that for weak Rydberg interactions,the Rydberg blockade radius breaks the spontaneous rotational symmetry of the system,leading to the formation of a discrete unit cell *** strongly interacting cases,it can be used to realize different orders of discrete rotational symmetry breaking.

关键词： Bose-Einstein condensate Rydberg dressing toroidal trap

In-situ SEM characterization of fracture mechanism of TiB/Ti-2Al-6Sn titanium matrix composites after electroshocking treatment

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第6期43卷 2805-2818页

作者： ya-ya Wu Jian Zhou guo-Lei Han yan Wen Zhou Wang Li-Qiang Wang Wei-Jie Lv Le-Chun Xie lin Hua Hubei Key Laboratory of Advanced Technology for Automotive Components Wuhan University of TechnologyWuhan 430070China Hubei Collaborative Innovation Center for Automotive Components Technology Wuhan 430070China Faculty of Materials and Manufacturing Beijing University of TechnologyBeijing 100124China State Key Laboratory of Metal Matrix Composites School of Materials Science and EngineeringShanghai Jiao Tong UniversityShanghai 200240China

In this article,in-situ scanning electron microscope characterization of the tensile properties of TiB/Ti-2Al-6Sn titanium matrix composite(TMC)was conducted before and after electroshocking treatment(EST).After EST,the tensile strength increased by 113.2 *** effect of EST on the tensile strength and fracture behavior of TiB was investigated using in-situ characterization of the fracture morphology and crack propagation path of the matrix and *** EST,TiB fracture introduced cracks that extended into the matrix,resulting in material *** EST,the refined TiB improved the bearing capacity of the matrix,thereby improving TMC ***,after EST,the cracks were introduced into the matrix,and resulting the fracture of matrix *** an increase in the external load,cracks in the matrix were observed to propagate to TiB,and the refined TiB was fractured,detached,and pulled out,resulting in the formation of *** the propagation path of the main crack after EST showed that the deflection angle of the main crack *** micro structure of the fracture surface indicated that the fracture of the matrix was plastic,whereas that of TiB was *** EST,the size and area of the dimples increased,confirming the increase in *** results revealed that the comprehensive mechanical properties of TiB/Ti-2Al-6Sn improved after ***,EST is an efficient method for tailoring the micro structures and mechanical properties of TMCs.

关键词： TiB/Ti-2Al-6Sn In-situ microstructure characterization Tensile properties Reinforcement Electroshocking treatment(EST)

Acupuncture for obesity and related diseases:Insight for regulating neural circuit

在线全文

学校读者我要写书评

暂无评论

Journal of Integrative Medicine 2024年第2期22卷 93-101页

作者： lin-yan Jiang Jun Tian ya-nan ya.g Shao-hui Jia Qing Shu Department of Rehabilitation Medicine Zhongnan HospitalWuhan UniversityWuhan 430071Hubei ProvinceChina School of Sports Medicine Wuhan Sports UniversityWuhan 430079Hubei ProvinceChina Department of Traditional Chinese Medicine China Resources&Wu Gang General HospitalWuhan 430080Hubei ProvinceChina

Obesity is defined as abnormal or excessive fat accumulation that may impair *** is associated with numerous pathological changes including insulin resistance,fatty liver,hyperlipidemias,and other obesity-related *** comorbidities comprise a significant public health *** anti-obesity drugs have been limited by side effects that include depression,suicidal thoughts,cardiovascular complications and *** treatment has been shown to be effective for treating obesity and obesity-related conditions,while avoiding side ***,the mechanisms of acupuncture in treating obesity-related diseases,especially its effect on neural circuits,are not well understood.A growing body of research has studied acupuncture’s effects on the endocrine system and other mechanisms related to the regulation of neural *** this article,recent research that was relevant to the use of acupuncture to treat obesity and obesity-related diseases through the neuroendocrine system,as well as some neural circuits involved,was *** on this,acupuncture’s potential ability to regulate neural circuits and its mechanisms of action in the endocrine system were reviewed,leading to a deeper mechanistic understanding of acupuncture’s effects and providing insight and direction for future research about obesity.

关键词： Obesity Acupuncture Neural circuit Appetite Energy metabolism

Pollution source identification methods and remediation technologies of groundwater: A review

在线全文

学校读者我要写书评

暂无评论

China geology 2024年第1期7卷 125-137页

作者： ya-ci Liu Yu-hong Fei ya-song Li Xi-lin Bao Peng-wei Zhang Fujian Provincial Key Laboratory of Water Cycling and Eco-geological Processes Institute of Hydrogeology and Environmental GeologyChinese Academy of Geological SciencesXiamen 361000China Key Laboratory of Water and Soil Resources Conservation and Restoration in the Middle and Lower Reaches of Yellow River Basin MNRZhengzhou 450016China

groundwater is an important source of drinking *** pollution severely endangers drinking water safety and sustainable social *** the case of groundwater pollution,the top priority is to identify pollution sources,and accurate information on pollution sources is the premise of efficient ***,an appropriate pollution remediation scheme should be developed according to information on pollution sources,site conditions,and economic *** methods for identifying pollution sources mainly include geophysical exploration,geochemistry,isotopic tracing,and numerical *** these identification methods,only the numerical modeling can recognize various information on pollution sources,while other methods can only identify a certain aspect of pollution *** remediation technologies of groundwater can be divided into in-situ and ex-situ remediation technologies according to the remediation *** in-situ remediation technologies enjoy low costs and a wide remediation range,but their remediation performance is prone to be affected by environmental conditions and cause secondary *** ex-situ remediation technologies boast high remediation efficiency,high processing capacity,and high treatment concentration but suffer high *** methods for pollution source identification and remediation technologies are applicable to different *** achieve the expected identification and remediation results,it is feasible to combine several methods and technologies according to the actual hydrogeological conditions of contaminated sites and the nature of ***,detailed knowledge about the hydrogeological conditions and stratigraphic structure of the contaminated site is the basis of all work regardless of the adopted identification methods or remediation technologies.

关键词： groundwater pollution Identification of pollution sources geophysical exploration identification geochemistry identification Isotopic tracing Numerical modeling Remediation technology Hydrogeological conditions Hydrogeological survey engineering

Advances in memristor based artificial neuron fabrication-materials,models,and applications

在线全文

学校读者我要写书评

暂无评论

International Journal of Extreme Manufacturing 2024年第1期6卷 27-50页

作者： Jingyao Bian Zhiyong Liu Ye Tao Zhongqiang Wang Xiaoning Zhao ya lin Haiya.g Xu Yichun Liu Key Laboratory for UV Light-Emitting Materials and Technology(Northeast Normal University) Ministry of Education5268 Renmin StreetChangchunPeople’s Republic of China

Spiking neural network(SNN),widely known as the third-generation neural network,has been frequently investigated due to its excellent spatiotemporal information processing capability,high biological plausibility,and low energy consumption *** to the working mechanism of human brain,the SNN system transmits information through the spiking action of ***,artificial neurons are critical building blocks for constructing SNN in *** are drawing growing attention due to low consumption,high speed,and nonlinearity characteristics,which are recently introduced to mimic the functions of biological *** have proposed multifarious memristive materials including organic materials,inorganic materials,or even two-dimensional *** advantage of the unique electrical behavior of these materials,several neuron models are successfully implemented,such as Hodgkin–Huxley model,leaky integrate-and-fire model and integrate-and-fire *** this review,the recent reports of artificial neurons based on memristive devices are *** addition,we highlight the models and applications through combining artificial neuronal devices with sensors or other electronic ***,the future challenges and outlooks of memristor-based artificial neurons are discussed,and the development of hardware implementation of brain-like intelligence system based on SNN is also prospected.

关键词： artificial neuron memristor memristive materials neuron model micro-nano manufacturing spiking neural network

Thickness dependence of superconductivity in layered geP_(5)

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第3期43卷 1323-1328页

作者： lin Wu Ke-Meng ya.g Wei gan Rui-Chun Xiao ya-Jie Dai Xi Tang Hong lin Hui Han Hui Li Information Materials and Intelligent Sensing Laboratory of Anhui Province Institute of Physical Science and Information TechnologyAnhui UniversityHefei230601China

Understanding the relationship between dimensionality and superconductivity has attracted substantial research *** this work,we report the effective modulation of superconductivity in geP_(5)through *** superconducting phase transition temperature improves by~10%as the thickness of geP_(5)decreases from bulk to~96 nm,behaving as a unique negative relationship between the superconducting phase transition temperatureand thickness.

关键词： superconductivity dimensionality

Mechanical performance of 22SiMn2TiB steel welded with lowtransformation- temperature filler wire and stainless steel filler wire

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第4期31卷 967-981页

作者： Zi-dong lin Kai-jie Song Zhen Sun Zi-qian Zhu Xue-feng Zhao Constantinos goulas Wei ya Xing-hua Yu School of Materials Science and Engineering Beijing Institute of TechnologyBeijing 100081China Beijing Institute of Technology Chongqing Innovation Center Chongqing 401120China Department of Design Production and Management Faculty of Engineering Technology.University of TwenteEnschede 7500 AETheNetherlands Rotterdam Additive Manufacture Fieldlab(RAMLAB) Rotterdam 3089 JWTheNetherlands

TX-80 low-transformation-temperature(LTT)welding wire was used to replace the traditional ER 307Si welding wire to realize the connection of 22SiMn2TiB armor steel in manual overlay *** previously existing issues,such as welding cracks,large welding deformation,and severe welding residual stress,were solved to ensure good strength and ductility *** particular,with the same welding conditions,TX-80 LTT wire eliminates welding *** reduces the welding deformation no matter the base pretreatment of pre-setting angle or no pre-setting *** comparison,it was found that the microstructure at the TX-80 weld is mainly composed of martensite and a small amount of retained *** contrast,the microstructure of the ER 307Si weld consists of a large amount of austenite and a small amount of skeleton-like *** variation trend of residual stress and microhardness from the weld to the base were investigated and compared with the mechanical properties of base *** TX-80 and the ER 307Si tensile samples elongation is 6.76%and 6.01%,while the ultimate tensile strengths are 877 and 667 MPa,*** average impact toughness at room temperature of the ER 307Si weld is 143.9 J/cm^(2),much higher than that of the TX-80 weld,which is only 36.7 J/cm^(2).The relationship between impact and tensile properties with microstructure species and distribution was *** addition,the fracture surface of the tensile and the impact samples was observed and *** dimples,fewer pores,larger radiation zone,and shear lips of TX-80 samples indicate better tensile ductility and worse impact toughness than those of ER 307Si weld.

关键词： Low-transformation-temperature material 22SiMn2TiB steel Welding deformation Residual stress Martensitic transformation Mechanical property